Mike Willard ccfc531695
ASoC: cs4270: pull reset GPIO low then high
Pull the RST line low then high when initializing the driver,
in order to force a reset of the chip.
Previously, the line was not pulled low, which could result in
the chip registers not resetting to their default values on boot.

Signed-off-by: Mike Willard <mwillard@izotope.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200401205454.79792-1-mwillard@izotope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-04-07 15:29:54 +01:00
..
2019-10-01 12:16:01 +01:00
2018-02-27 10:41:34 +00:00
2019-10-25 11:06:57 +01:00
2020-01-07 22:29:38 +00:00
2020-01-17 15:38:56 +00:00
2020-01-14 15:49:03 +00:00
2020-03-11 18:45:26 +00:00
2018-04-26 12:44:15 +01:00
2019-10-21 13:52:22 +01:00
2020-03-23 18:17:22 +00:00
2019-06-12 13:52:26 +01:00
2019-06-12 13:52:26 +01:00
2020-01-10 13:31:49 +00:00
2020-01-09 21:22:36 +00:00
2020-01-13 14:58:45 +00:00
2019-07-26 13:10:09 +01:00
2018-05-18 11:20:11 +01:00
2019-06-26 12:39:34 +01:00
2019-06-26 12:39:34 +01:00
2019-01-07 16:53:10 +00:00
2018-06-01 12:05:30 +01:00
2020-03-06 14:05:03 +00:00
2019-12-17 14:18:32 +01:00
2019-12-16 11:47:28 +00:00
2020-03-24 17:15:58 +00:00
2019-10-02 12:50:40 +01:00