046d2e7c50
Currently in mac80211 each STA object is represented using sta_info datastructure with the associated STA specific information and drivers access ieee80211_sta part of it. With MLO (Multi Link Operation) support being added in 802.11be standard, though the association is logically with a single Multi Link capable STA, at the physical level communication can happen via different advertised links (uniquely identified by Channel, operating class, BSSID) and hence the need to handle multiple link STA parameters within a composite sta_info object called the MLD STA. The different link STA part of MLD STA are identified using the link address which can be same or different as the MLD STA address and unique link id based on the link vif. To support extension of such a model, the sta_info datastructure is modified to hold multiple link STA objects with link specific params currently within sta_info moved to this new structure. Similarly this is done for ieee80211_sta as well which will be accessed within mac80211 as well as by drivers, hence trivial driver changes are expected to support this. For current non MLO supported drivers, only one link STA is present and link information is accessed via 'deflink' member. For MLO drivers, we still need to define the APIs etc. to get the correct link ID and access the correct part of the station info. Currently in mac80211, all link STA info are accessed directly via deflink. These will be updated to access via link pointers indexed by link id with MLO support patches, with link id being 0 for non MLO supported cases. Except for couple of macro related changes, below spatch takes care of updating mac80211 and driver code to access to the link STA info via deflink. @ieee80211_sta@ struct ieee80211_sta *s; struct sta_info *si; identifier var = {supp_rates, ht_cap, vht_cap, he_cap, he_6ghz_capa, eht_cap, rx_nss, bandwidth, txpwr}; @@ ( s-> - var + deflink.var | si->sta. - var + deflink.var ) @sta_info@ struct sta_info *si; identifier var = {gtk, pcpu_rx_stats, rx_stats, rx_stats_avg, status_stats, tx_stats, cur_max_bandwidth}; @@ ( si-> - var + deflink.var ) Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Link: https://lore.kernel.org/r/1649086883-13246-1-git-send-email-quic_srirrama@quicinc.com [remove MLO-drivers notes from commit message, not clear yet; run spatch] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2265 lines
64 KiB
C
2265 lines
64 KiB
C
/*
|
|
* Copyright (c) 2014 Redpine Signals Inc.
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/timer.h>
|
|
#include "rsi_mgmt.h"
|
|
#include "rsi_common.h"
|
|
#include "rsi_ps.h"
|
|
#include "rsi_hal.h"
|
|
|
|
static struct bootup_params boot_params_20 = {
|
|
.magic_number = cpu_to_le16(0x5aa5),
|
|
.crystal_good_time = 0x0,
|
|
.valid = cpu_to_le32(VALID_20),
|
|
.reserved_for_valids = 0x0,
|
|
.bootup_mode_info = 0x0,
|
|
.digital_loop_back_params = 0x0,
|
|
.rtls_timestamp_en = 0x0,
|
|
.host_spi_intr_cfg = 0x0,
|
|
.device_clk_info = {{
|
|
.pll_config_g = {
|
|
.tapll_info_g = {
|
|
.pll_reg_1 = cpu_to_le16((TA_PLL_N_VAL_20 << 8)|
|
|
(TA_PLL_M_VAL_20)),
|
|
.pll_reg_2 = cpu_to_le16(TA_PLL_P_VAL_20),
|
|
},
|
|
.pll960_info_g = {
|
|
.pll_reg_1 = cpu_to_le16((PLL960_P_VAL_20 << 8)|
|
|
(PLL960_N_VAL_20)),
|
|
.pll_reg_2 = cpu_to_le16(PLL960_M_VAL_20),
|
|
.pll_reg_3 = 0x0,
|
|
},
|
|
.afepll_info_g = {
|
|
.pll_reg = cpu_to_le16(0x9f0),
|
|
}
|
|
},
|
|
.switch_clk_g = {
|
|
.switch_clk_info = cpu_to_le16(0xb),
|
|
.bbp_lmac_clk_reg_val = cpu_to_le16(0x111),
|
|
.umac_clock_reg_config = cpu_to_le16(0x48),
|
|
.qspi_uart_clock_reg_config = cpu_to_le16(0x1211)
|
|
}
|
|
},
|
|
{
|
|
.pll_config_g = {
|
|
.tapll_info_g = {
|
|
.pll_reg_1 = cpu_to_le16((TA_PLL_N_VAL_20 << 8)|
|
|
(TA_PLL_M_VAL_20)),
|
|
.pll_reg_2 = cpu_to_le16(TA_PLL_P_VAL_20),
|
|
},
|
|
.pll960_info_g = {
|
|
.pll_reg_1 = cpu_to_le16((PLL960_P_VAL_20 << 8)|
|
|
(PLL960_N_VAL_20)),
|
|
.pll_reg_2 = cpu_to_le16(PLL960_M_VAL_20),
|
|
.pll_reg_3 = 0x0,
|
|
},
|
|
.afepll_info_g = {
|
|
.pll_reg = cpu_to_le16(0x9f0),
|
|
}
|
|
},
|
|
.switch_clk_g = {
|
|
.switch_clk_info = 0x0,
|
|
.bbp_lmac_clk_reg_val = 0x0,
|
|
.umac_clock_reg_config = 0x0,
|
|
.qspi_uart_clock_reg_config = 0x0
|
|
}
|
|
},
|
|
{
|
|
.pll_config_g = {
|
|
.tapll_info_g = {
|
|
.pll_reg_1 = cpu_to_le16((TA_PLL_N_VAL_20 << 8)|
|
|
(TA_PLL_M_VAL_20)),
|
|
.pll_reg_2 = cpu_to_le16(TA_PLL_P_VAL_20),
|
|
},
|
|
.pll960_info_g = {
|
|
.pll_reg_1 = cpu_to_le16((PLL960_P_VAL_20 << 8)|
|
|
(PLL960_N_VAL_20)),
|
|
.pll_reg_2 = cpu_to_le16(PLL960_M_VAL_20),
|
|
.pll_reg_3 = 0x0,
|
|
},
|
|
.afepll_info_g = {
|
|
.pll_reg = cpu_to_le16(0x9f0),
|
|
}
|
|
},
|
|
.switch_clk_g = {
|
|
.switch_clk_info = 0x0,
|
|
.bbp_lmac_clk_reg_val = 0x0,
|
|
.umac_clock_reg_config = 0x0,
|
|
.qspi_uart_clock_reg_config = 0x0
|
|
}
|
|
} },
|
|
.buckboost_wakeup_cnt = 0x0,
|
|
.pmu_wakeup_wait = 0x0,
|
|
.shutdown_wait_time = 0x0,
|
|
.pmu_slp_clkout_sel = 0x0,
|
|
.wdt_prog_value = 0x0,
|
|
.wdt_soc_rst_delay = 0x0,
|
|
.dcdc_operation_mode = 0x0,
|
|
.soc_reset_wait_cnt = 0x0,
|
|
.waiting_time_at_fresh_sleep = 0x0,
|
|
.max_threshold_to_avoid_sleep = 0x0,
|
|
.beacon_resedue_alg_en = 0,
|
|
};
|
|
|
|
static struct bootup_params boot_params_40 = {
|
|
.magic_number = cpu_to_le16(0x5aa5),
|
|
.crystal_good_time = 0x0,
|
|
.valid = cpu_to_le32(VALID_40),
|
|
.reserved_for_valids = 0x0,
|
|
.bootup_mode_info = 0x0,
|
|
.digital_loop_back_params = 0x0,
|
|
.rtls_timestamp_en = 0x0,
|
|
.host_spi_intr_cfg = 0x0,
|
|
.device_clk_info = {{
|
|
.pll_config_g = {
|
|
.tapll_info_g = {
|
|
.pll_reg_1 = cpu_to_le16((TA_PLL_N_VAL_40 << 8)|
|
|
(TA_PLL_M_VAL_40)),
|
|
.pll_reg_2 = cpu_to_le16(TA_PLL_P_VAL_40),
|
|
},
|
|
.pll960_info_g = {
|
|
.pll_reg_1 = cpu_to_le16((PLL960_P_VAL_40 << 8)|
|
|
(PLL960_N_VAL_40)),
|
|
.pll_reg_2 = cpu_to_le16(PLL960_M_VAL_40),
|
|
.pll_reg_3 = 0x0,
|
|
},
|
|
.afepll_info_g = {
|
|
.pll_reg = cpu_to_le16(0x9f0),
|
|
}
|
|
},
|
|
.switch_clk_g = {
|
|
.switch_clk_info = cpu_to_le16(0x09),
|
|
.bbp_lmac_clk_reg_val = cpu_to_le16(0x1121),
|
|
.umac_clock_reg_config = cpu_to_le16(0x48),
|
|
.qspi_uart_clock_reg_config = cpu_to_le16(0x1211)
|
|
}
|
|
},
|
|
{
|
|
.pll_config_g = {
|
|
.tapll_info_g = {
|
|
.pll_reg_1 = cpu_to_le16((TA_PLL_N_VAL_40 << 8)|
|
|
(TA_PLL_M_VAL_40)),
|
|
.pll_reg_2 = cpu_to_le16(TA_PLL_P_VAL_40),
|
|
},
|
|
.pll960_info_g = {
|
|
.pll_reg_1 = cpu_to_le16((PLL960_P_VAL_40 << 8)|
|
|
(PLL960_N_VAL_40)),
|
|
.pll_reg_2 = cpu_to_le16(PLL960_M_VAL_40),
|
|
.pll_reg_3 = 0x0,
|
|
},
|
|
.afepll_info_g = {
|
|
.pll_reg = cpu_to_le16(0x9f0),
|
|
}
|
|
},
|
|
.switch_clk_g = {
|
|
.switch_clk_info = 0x0,
|
|
.bbp_lmac_clk_reg_val = 0x0,
|
|
.umac_clock_reg_config = 0x0,
|
|
.qspi_uart_clock_reg_config = 0x0
|
|
}
|
|
},
|
|
{
|
|
.pll_config_g = {
|
|
.tapll_info_g = {
|
|
.pll_reg_1 = cpu_to_le16((TA_PLL_N_VAL_40 << 8)|
|
|
(TA_PLL_M_VAL_40)),
|
|
.pll_reg_2 = cpu_to_le16(TA_PLL_P_VAL_40),
|
|
},
|
|
.pll960_info_g = {
|
|
.pll_reg_1 = cpu_to_le16((PLL960_P_VAL_40 << 8)|
|
|
(PLL960_N_VAL_40)),
|
|
.pll_reg_2 = cpu_to_le16(PLL960_M_VAL_40),
|
|
.pll_reg_3 = 0x0,
|
|
},
|
|
.afepll_info_g = {
|
|
.pll_reg = cpu_to_le16(0x9f0),
|
|
}
|
|
},
|
|
.switch_clk_g = {
|
|
.switch_clk_info = 0x0,
|
|
.bbp_lmac_clk_reg_val = 0x0,
|
|
.umac_clock_reg_config = 0x0,
|
|
.qspi_uart_clock_reg_config = 0x0
|
|
}
|
|
} },
|
|
.buckboost_wakeup_cnt = 0x0,
|
|
.pmu_wakeup_wait = 0x0,
|
|
.shutdown_wait_time = 0x0,
|
|
.pmu_slp_clkout_sel = 0x0,
|
|
.wdt_prog_value = 0x0,
|
|
.wdt_soc_rst_delay = 0x0,
|
|
.dcdc_operation_mode = 0x0,
|
|
.soc_reset_wait_cnt = 0x0,
|
|
.waiting_time_at_fresh_sleep = 0x0,
|
|
.max_threshold_to_avoid_sleep = 0x0,
|
|
.beacon_resedue_alg_en = 0,
|
|
};
|
|
|
|
static struct bootup_params_9116 boot_params_9116_20 = {
|
|
.magic_number = cpu_to_le16(LOADED_TOKEN),
|
|
.valid = cpu_to_le32(VALID_20),
|
|
.device_clk_info_9116 = {{
|
|
.pll_config_9116_g = {
|
|
.pll_ctrl_set_reg = cpu_to_le16(0xd518),
|
|
.pll_ctrl_clr_reg = cpu_to_le16(0x2ae7),
|
|
.pll_modem_conig_reg = cpu_to_le16(0x2000),
|
|
.soc_clk_config_reg = cpu_to_le16(0x0c18),
|
|
.adc_dac_strm1_config_reg = cpu_to_le16(0x1100),
|
|
.adc_dac_strm2_config_reg = cpu_to_le16(0x6600),
|
|
},
|
|
.switch_clk_9116_g = {
|
|
.switch_clk_info =
|
|
cpu_to_le32((RSI_SWITCH_TASS_CLK |
|
|
RSI_SWITCH_WLAN_BBP_LMAC_CLK_REG |
|
|
RSI_SWITCH_BBP_LMAC_CLK_REG)),
|
|
.tass_clock_reg = cpu_to_le32(0x083C0503),
|
|
.wlan_bbp_lmac_clk_reg_val = cpu_to_le32(0x01042001),
|
|
.zbbt_bbp_lmac_clk_reg_val = cpu_to_le32(0x02010001),
|
|
.bbp_lmac_clk_en_val = cpu_to_le32(0x0000003b),
|
|
}
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct bootup_params_9116 boot_params_9116_40 = {
|
|
.magic_number = cpu_to_le16(LOADED_TOKEN),
|
|
.valid = cpu_to_le32(VALID_40),
|
|
.device_clk_info_9116 = {{
|
|
.pll_config_9116_g = {
|
|
.pll_ctrl_set_reg = cpu_to_le16(0xd518),
|
|
.pll_ctrl_clr_reg = cpu_to_le16(0x2ae7),
|
|
.pll_modem_conig_reg = cpu_to_le16(0x3000),
|
|
.soc_clk_config_reg = cpu_to_le16(0x0c18),
|
|
.adc_dac_strm1_config_reg = cpu_to_le16(0x0000),
|
|
.adc_dac_strm2_config_reg = cpu_to_le16(0x6600),
|
|
},
|
|
.switch_clk_9116_g = {
|
|
.switch_clk_info =
|
|
cpu_to_le32((RSI_SWITCH_TASS_CLK |
|
|
RSI_SWITCH_WLAN_BBP_LMAC_CLK_REG |
|
|
RSI_SWITCH_BBP_LMAC_CLK_REG |
|
|
RSI_MODEM_CLK_160MHZ)),
|
|
.tass_clock_reg = cpu_to_le32(0x083C0503),
|
|
.wlan_bbp_lmac_clk_reg_val = cpu_to_le32(0x01042002),
|
|
.zbbt_bbp_lmac_clk_reg_val = cpu_to_le32(0x04010002),
|
|
.bbp_lmac_clk_en_val = cpu_to_le32(0x0000003b),
|
|
}
|
|
},
|
|
},
|
|
};
|
|
|
|
static u16 mcs[] = {13, 26, 39, 52, 78, 104, 117, 130};
|
|
|
|
/**
|
|
* rsi_set_default_parameters() - This function sets default parameters.
|
|
* @common: Pointer to the driver private structure.
|
|
*
|
|
* Return: none
|
|
*/
|
|
static void rsi_set_default_parameters(struct rsi_common *common)
|
|
{
|
|
common->band = NL80211_BAND_2GHZ;
|
|
common->channel_width = BW_20MHZ;
|
|
common->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD;
|
|
common->channel = 1;
|
|
memset(&common->rate_config, 0, sizeof(common->rate_config));
|
|
common->fsm_state = FSM_CARD_NOT_READY;
|
|
common->iface_down = true;
|
|
common->endpoint = EP_2GHZ_20MHZ;
|
|
common->driver_mode = 1; /* End to end mode */
|
|
common->lp_ps_handshake_mode = 0; /* Default no handShake mode*/
|
|
common->ulp_ps_handshake_mode = 2; /* Default PKT handShake mode*/
|
|
common->rf_power_val = 0; /* Default 1.9V */
|
|
common->wlan_rf_power_mode = 0;
|
|
common->obm_ant_sel_val = 2;
|
|
common->beacon_interval = RSI_BEACON_INTERVAL;
|
|
common->dtim_cnt = RSI_DTIM_COUNT;
|
|
common->w9116_features.pll_mode = 0x0;
|
|
common->w9116_features.rf_type = 1;
|
|
common->w9116_features.wireless_mode = 0;
|
|
common->w9116_features.enable_ppe = 0;
|
|
common->w9116_features.afe_type = 1;
|
|
common->w9116_features.dpd = 0;
|
|
common->w9116_features.sifs_tx_enable = 0;
|
|
common->w9116_features.ps_options = 0;
|
|
}
|
|
|
|
void init_bgscan_params(struct rsi_common *common)
|
|
{
|
|
memset((u8 *)&common->bgscan, 0, sizeof(struct rsi_bgscan_params));
|
|
common->bgscan.bgscan_threshold = RSI_DEF_BGSCAN_THRLD;
|
|
common->bgscan.roam_threshold = RSI_DEF_ROAM_THRLD;
|
|
common->bgscan.bgscan_periodicity = RSI_BGSCAN_PERIODICITY;
|
|
common->bgscan.num_bgscan_channels = 0;
|
|
common->bgscan.two_probe = 1;
|
|
common->bgscan.active_scan_duration = RSI_ACTIVE_SCAN_TIME;
|
|
common->bgscan.passive_scan_duration = RSI_PASSIVE_SCAN_TIME;
|
|
}
|
|
|
|
/**
|
|
* rsi_set_contention_vals() - This function sets the contention values for the
|
|
* backoff procedure.
|
|
* @common: Pointer to the driver private structure.
|
|
*
|
|
* Return: None.
|
|
*/
|
|
static void rsi_set_contention_vals(struct rsi_common *common)
|
|
{
|
|
u8 ii = 0;
|
|
|
|
for (; ii < NUM_EDCA_QUEUES; ii++) {
|
|
common->tx_qinfo[ii].wme_params =
|
|
(((common->edca_params[ii].cw_min / 2) +
|
|
(common->edca_params[ii].aifs)) *
|
|
WMM_SHORT_SLOT_TIME + SIFS_DURATION);
|
|
common->tx_qinfo[ii].weight = common->tx_qinfo[ii].wme_params;
|
|
common->tx_qinfo[ii].pkt_contended = 0;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* rsi_send_internal_mgmt_frame() - This function sends management frames to
|
|
* firmware.Also schedules packet to queue
|
|
* for transmission.
|
|
* @common: Pointer to the driver private structure.
|
|
* @skb: Pointer to the socket buffer structure.
|
|
*
|
|
* Return: 0 on success, -1 on failure.
|
|
*/
|
|
static int rsi_send_internal_mgmt_frame(struct rsi_common *common,
|
|
struct sk_buff *skb)
|
|
{
|
|
struct skb_info *tx_params;
|
|
struct rsi_cmd_desc *desc;
|
|
|
|
if (skb == NULL) {
|
|
rsi_dbg(ERR_ZONE, "%s: Unable to allocate skb\n", __func__);
|
|
return -ENOMEM;
|
|
}
|
|
desc = (struct rsi_cmd_desc *)skb->data;
|
|
desc->desc_dword0.len_qno |= cpu_to_le16(DESC_IMMEDIATE_WAKEUP);
|
|
skb->priority = MGMT_SOFT_Q;
|
|
tx_params = (struct skb_info *)&IEEE80211_SKB_CB(skb)->driver_data;
|
|
tx_params->flags |= INTERNAL_MGMT_PKT;
|
|
skb_queue_tail(&common->tx_queue[MGMT_SOFT_Q], skb);
|
|
rsi_set_event(&common->tx_thread.event);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* rsi_load_radio_caps() - This function is used to send radio capabilities
|
|
* values to firmware.
|
|
* @common: Pointer to the driver private structure.
|
|
*
|
|
* Return: 0 on success, corresponding negative error code on failure.
|
|
*/
|
|
static int rsi_load_radio_caps(struct rsi_common *common)
|
|
{
|
|
struct rsi_radio_caps *radio_caps;
|
|
struct rsi_hw *adapter = common->priv;
|
|
u16 inx = 0;
|
|
u8 ii;
|
|
u8 radio_id = 0;
|
|
u16 gc[20] = {0xf0, 0xf0, 0xf0, 0xf0,
|
|
0xf0, 0xf0, 0xf0, 0xf0,
|
|
0xf0, 0xf0, 0xf0, 0xf0,
|
|
0xf0, 0xf0, 0xf0, 0xf0,
|
|
0xf0, 0xf0, 0xf0, 0xf0};
|
|
struct sk_buff *skb;
|
|
u16 frame_len = sizeof(struct rsi_radio_caps);
|
|
|
|
rsi_dbg(INFO_ZONE, "%s: Sending rate symbol req frame\n", __func__);
|
|
|
|
skb = dev_alloc_skb(frame_len);
|
|
|
|
if (!skb) {
|
|
rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
|
|
__func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memset(skb->data, 0, frame_len);
|
|
radio_caps = (struct rsi_radio_caps *)skb->data;
|
|
|
|
radio_caps->desc_dword0.frame_type = RADIO_CAPABILITIES;
|
|
radio_caps->channel_num = common->channel;
|
|
radio_caps->rf_model = RSI_RF_TYPE;
|
|
|
|
radio_caps->radio_cfg_info = RSI_LMAC_CLOCK_80MHZ;
|
|
if (common->channel_width == BW_40MHZ) {
|
|
radio_caps->radio_cfg_info |= RSI_ENABLE_40MHZ;
|
|
|
|
if (common->fsm_state == FSM_MAC_INIT_DONE) {
|
|
struct ieee80211_hw *hw = adapter->hw;
|
|
struct ieee80211_conf *conf = &hw->conf;
|
|
|
|
if (conf_is_ht40_plus(conf)) {
|
|
radio_caps->ppe_ack_rate =
|
|
cpu_to_le16(LOWER_20_ENABLE |
|
|
(LOWER_20_ENABLE >> 12));
|
|
} else if (conf_is_ht40_minus(conf)) {
|
|
radio_caps->ppe_ack_rate =
|
|
cpu_to_le16(UPPER_20_ENABLE |
|
|
(UPPER_20_ENABLE >> 12));
|
|
} else {
|
|
radio_caps->ppe_ack_rate =
|
|
cpu_to_le16((BW_40MHZ << 12) |
|
|
FULL40M_ENABLE);
|
|
}
|
|
}
|
|
}
|
|
radio_caps->radio_info |= radio_id;
|
|
|
|
if (adapter->device_model == RSI_DEV_9116 &&
|
|
common->channel_width == BW_20MHZ)
|
|
radio_caps->radio_cfg_info &= ~0x3;
|
|
|
|
radio_caps->sifs_tx_11n = cpu_to_le16(SIFS_TX_11N_VALUE);
|
|
radio_caps->sifs_tx_11b = cpu_to_le16(SIFS_TX_11B_VALUE);
|
|
radio_caps->slot_rx_11n = cpu_to_le16(SHORT_SLOT_VALUE);
|
|
radio_caps->ofdm_ack_tout = cpu_to_le16(OFDM_ACK_TOUT_VALUE);
|
|
radio_caps->cck_ack_tout = cpu_to_le16(CCK_ACK_TOUT_VALUE);
|
|
radio_caps->preamble_type = cpu_to_le16(LONG_PREAMBLE);
|
|
|
|
for (ii = 0; ii < MAX_HW_QUEUES; ii++) {
|
|
radio_caps->qos_params[ii].cont_win_min_q = cpu_to_le16(3);
|
|
radio_caps->qos_params[ii].cont_win_max_q = cpu_to_le16(0x3f);
|
|
radio_caps->qos_params[ii].aifsn_val_q = cpu_to_le16(2);
|
|
radio_caps->qos_params[ii].txop_q = 0;
|
|
}
|
|
|
|
for (ii = 0; ii < NUM_EDCA_QUEUES; ii++) {
|
|
if (common->edca_params[ii].cw_max > 0) {
|
|
radio_caps->qos_params[ii].cont_win_min_q =
|
|
cpu_to_le16(common->edca_params[ii].cw_min);
|
|
radio_caps->qos_params[ii].cont_win_max_q =
|
|
cpu_to_le16(common->edca_params[ii].cw_max);
|
|
radio_caps->qos_params[ii].aifsn_val_q =
|
|
cpu_to_le16(common->edca_params[ii].aifs << 8);
|
|
radio_caps->qos_params[ii].txop_q =
|
|
cpu_to_le16(common->edca_params[ii].txop);
|
|
}
|
|
}
|
|
|
|
radio_caps->qos_params[BROADCAST_HW_Q].txop_q = cpu_to_le16(0xffff);
|
|
radio_caps->qos_params[MGMT_HW_Q].txop_q = 0;
|
|
radio_caps->qos_params[BEACON_HW_Q].txop_q = cpu_to_le16(0xffff);
|
|
|
|
memcpy(&common->rate_pwr[0], &gc[0], 40);
|
|
for (ii = 0; ii < 20; ii++)
|
|
radio_caps->gcpd_per_rate[inx++] =
|
|
cpu_to_le16(common->rate_pwr[ii] & 0x00FF);
|
|
|
|
rsi_set_len_qno(&radio_caps->desc_dword0.len_qno,
|
|
(frame_len - FRAME_DESC_SZ), RSI_WIFI_MGMT_Q);
|
|
|
|
skb_put(skb, frame_len);
|
|
|
|
return rsi_send_internal_mgmt_frame(common, skb);
|
|
}
|
|
|
|
/**
|
|
* rsi_mgmt_pkt_to_core() - This function is the entry point for Mgmt module.
|
|
* @common: Pointer to the driver private structure.
|
|
* @msg: Pointer to received packet.
|
|
* @msg_len: Length of the received packet.
|
|
*
|
|
* Return: 0 on success, -1 on failure.
|
|
*/
|
|
static int rsi_mgmt_pkt_to_core(struct rsi_common *common,
|
|
u8 *msg,
|
|
s32 msg_len)
|
|
{
|
|
struct rsi_hw *adapter = common->priv;
|
|
struct ieee80211_tx_info *info;
|
|
struct skb_info *rx_params;
|
|
u8 pad_bytes = msg[4];
|
|
struct sk_buff *skb;
|
|
|
|
if (!adapter->sc_nvifs)
|
|
return -ENOLINK;
|
|
|
|
msg_len -= pad_bytes;
|
|
if (msg_len <= 0) {
|
|
rsi_dbg(MGMT_RX_ZONE,
|
|
"%s: Invalid rx msg of len = %d\n",
|
|
__func__, msg_len);
|
|
return -EINVAL;
|
|
}
|
|
|
|
skb = dev_alloc_skb(msg_len);
|
|
if (!skb)
|
|
return -ENOMEM;
|
|
|
|
skb_put_data(skb,
|
|
(u8 *)(msg + FRAME_DESC_SZ + pad_bytes),
|
|
msg_len);
|
|
|
|
info = IEEE80211_SKB_CB(skb);
|
|
rx_params = (struct skb_info *)info->driver_data;
|
|
rx_params->rssi = rsi_get_rssi(msg);
|
|
rx_params->channel = rsi_get_channel(msg);
|
|
rsi_indicate_pkt_to_os(common, skb);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* rsi_hal_send_sta_notify_frame() - This function sends the station notify
|
|
* frame to firmware.
|
|
* @common: Pointer to the driver private structure.
|
|
* @opmode: Operating mode of device.
|
|
* @notify_event: Notification about station connection.
|
|
* @bssid: bssid.
|
|
* @qos_enable: Qos is enabled.
|
|
* @aid: Aid (unique for all STA).
|
|
* @sta_id: station id.
|
|
* @vif: Pointer to the ieee80211_vif structure.
|
|
*
|
|
* Return: status: 0 on success, corresponding negative error code on failure.
|
|
*/
|
|
int rsi_hal_send_sta_notify_frame(struct rsi_common *common, enum opmode opmode,
|
|
u8 notify_event, const unsigned char *bssid,
|
|
u8 qos_enable, u16 aid, u16 sta_id,
|
|
struct ieee80211_vif *vif)
|
|
{
|
|
struct sk_buff *skb = NULL;
|
|
struct rsi_peer_notify *peer_notify;
|
|
u16 vap_id = ((struct vif_priv *)vif->drv_priv)->vap_id;
|
|
int status;
|
|
u16 frame_len = sizeof(struct rsi_peer_notify);
|
|
|
|
rsi_dbg(MGMT_TX_ZONE, "%s: Sending sta notify frame\n", __func__);
|
|
|
|
skb = dev_alloc_skb(frame_len);
|
|
|
|
if (!skb) {
|
|
rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
|
|
__func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memset(skb->data, 0, frame_len);
|
|
peer_notify = (struct rsi_peer_notify *)skb->data;
|
|
|
|
if (opmode == RSI_OPMODE_STA)
|
|
peer_notify->command = cpu_to_le16(PEER_TYPE_AP << 1);
|
|
else if (opmode == RSI_OPMODE_AP)
|
|
peer_notify->command = cpu_to_le16(PEER_TYPE_STA << 1);
|
|
|
|
switch (notify_event) {
|
|
case STA_CONNECTED:
|
|
peer_notify->command |= cpu_to_le16(RSI_ADD_PEER);
|
|
break;
|
|
case STA_DISCONNECTED:
|
|
peer_notify->command |= cpu_to_le16(RSI_DELETE_PEER);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
peer_notify->command |= cpu_to_le16((aid & 0xfff) << 4);
|
|
ether_addr_copy(peer_notify->mac_addr, bssid);
|
|
peer_notify->mpdu_density = cpu_to_le16(RSI_MPDU_DENSITY);
|
|
peer_notify->sta_flags = cpu_to_le32((qos_enable) ? 1 : 0);
|
|
|
|
rsi_set_len_qno(&peer_notify->desc.desc_dword0.len_qno,
|
|
(frame_len - FRAME_DESC_SZ),
|
|
RSI_WIFI_MGMT_Q);
|
|
peer_notify->desc.desc_dword0.frame_type = PEER_NOTIFY;
|
|
peer_notify->desc.desc_dword3.qid_tid = sta_id;
|
|
peer_notify->desc.desc_dword3.sta_id = vap_id;
|
|
|
|
skb_put(skb, frame_len);
|
|
|
|
status = rsi_send_internal_mgmt_frame(common, skb);
|
|
|
|
if ((vif->type == NL80211_IFTYPE_STATION) &&
|
|
(!status && qos_enable)) {
|
|
rsi_set_contention_vals(common);
|
|
status = rsi_load_radio_caps(common);
|
|
}
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* rsi_send_aggregation_params_frame() - This function sends the ampdu
|
|
* indication frame to firmware.
|
|
* @common: Pointer to the driver private structure.
|
|
* @tid: traffic identifier.
|
|
* @ssn: ssn.
|
|
* @buf_size: buffer size.
|
|
* @event: notification about station connection.
|
|
* @sta_id: station id.
|
|
*
|
|
* Return: 0 on success, corresponding negative error code on failure.
|
|
*/
|
|
int rsi_send_aggregation_params_frame(struct rsi_common *common,
|
|
u16 tid,
|
|
u16 ssn,
|
|
u8 buf_size,
|
|
u8 event,
|
|
u8 sta_id)
|
|
{
|
|
struct sk_buff *skb = NULL;
|
|
struct rsi_aggr_params *aggr_params;
|
|
u16 frame_len = sizeof(struct rsi_aggr_params);
|
|
|
|
skb = dev_alloc_skb(frame_len);
|
|
|
|
if (!skb) {
|
|
rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
|
|
__func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memset(skb->data, 0, frame_len);
|
|
aggr_params = (struct rsi_aggr_params *)skb->data;
|
|
|
|
rsi_dbg(MGMT_TX_ZONE, "%s: Sending AMPDU indication frame\n", __func__);
|
|
|
|
rsi_set_len_qno(&aggr_params->desc_dword0.len_qno, 0, RSI_WIFI_MGMT_Q);
|
|
aggr_params->desc_dword0.frame_type = AMPDU_IND;
|
|
|
|
aggr_params->aggr_params = tid & RSI_AGGR_PARAMS_TID_MASK;
|
|
aggr_params->peer_id = sta_id;
|
|
if (event == STA_TX_ADDBA_DONE) {
|
|
aggr_params->seq_start = cpu_to_le16(ssn);
|
|
aggr_params->baw_size = cpu_to_le16(buf_size);
|
|
aggr_params->aggr_params |= RSI_AGGR_PARAMS_START;
|
|
} else if (event == STA_RX_ADDBA_DONE) {
|
|
aggr_params->seq_start = cpu_to_le16(ssn);
|
|
aggr_params->aggr_params |= (RSI_AGGR_PARAMS_START |
|
|
RSI_AGGR_PARAMS_RX_AGGR);
|
|
} else if (event == STA_RX_DELBA) {
|
|
aggr_params->aggr_params |= RSI_AGGR_PARAMS_RX_AGGR;
|
|
}
|
|
|
|
skb_put(skb, frame_len);
|
|
|
|
return rsi_send_internal_mgmt_frame(common, skb);
|
|
}
|
|
|
|
/**
|
|
* rsi_program_bb_rf() - This function starts base band and RF programming.
|
|
* This is called after initial configurations are done.
|
|
* @common: Pointer to the driver private structure.
|
|
*
|
|
* Return: 0 on success, corresponding negative error code on failure.
|
|
*/
|
|
static int rsi_program_bb_rf(struct rsi_common *common)
|
|
{
|
|
struct sk_buff *skb;
|
|
struct rsi_bb_rf_prog *bb_rf_prog;
|
|
u16 frame_len = sizeof(struct rsi_bb_rf_prog);
|
|
|
|
rsi_dbg(MGMT_TX_ZONE, "%s: Sending program BB/RF frame\n", __func__);
|
|
|
|
skb = dev_alloc_skb(frame_len);
|
|
if (!skb) {
|
|
rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
|
|
__func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memset(skb->data, 0, frame_len);
|
|
bb_rf_prog = (struct rsi_bb_rf_prog *)skb->data;
|
|
|
|
rsi_set_len_qno(&bb_rf_prog->desc_dword0.len_qno, 0, RSI_WIFI_MGMT_Q);
|
|
bb_rf_prog->desc_dword0.frame_type = BBP_PROG_IN_TA;
|
|
bb_rf_prog->endpoint = common->endpoint;
|
|
bb_rf_prog->rf_power_mode = common->wlan_rf_power_mode;
|
|
|
|
if (common->rf_reset) {
|
|
bb_rf_prog->flags = cpu_to_le16(RF_RESET_ENABLE);
|
|
rsi_dbg(MGMT_TX_ZONE, "%s: ===> RF RESET REQUEST SENT <===\n",
|
|
__func__);
|
|
common->rf_reset = 0;
|
|
}
|
|
common->bb_rf_prog_count = 1;
|
|
bb_rf_prog->flags |= cpu_to_le16(PUT_BBP_RESET | BBP_REG_WRITE |
|
|
(RSI_RF_TYPE << 4));
|
|
skb_put(skb, frame_len);
|
|
|
|
return rsi_send_internal_mgmt_frame(common, skb);
|
|
}
|
|
|
|
/**
|
|
* rsi_set_vap_capabilities() - This function send vap capability to firmware.
|
|
* @common: Pointer to the driver private structure.
|
|
* @mode: Operating mode of device.
|
|
* @mac_addr: MAC address
|
|
* @vap_id: Rate information - offset and mask
|
|
* @vap_status: VAP status - ADD, DELETE or UPDATE
|
|
*
|
|
* Return: 0 on success, corresponding negative error code on failure.
|
|
*/
|
|
int rsi_set_vap_capabilities(struct rsi_common *common,
|
|
enum opmode mode,
|
|
u8 *mac_addr,
|
|
u8 vap_id,
|
|
u8 vap_status)
|
|
{
|
|
struct sk_buff *skb = NULL;
|
|
struct rsi_vap_caps *vap_caps;
|
|
struct rsi_hw *adapter = common->priv;
|
|
struct ieee80211_hw *hw = adapter->hw;
|
|
struct ieee80211_conf *conf = &hw->conf;
|
|
u16 frame_len = sizeof(struct rsi_vap_caps);
|
|
|
|
rsi_dbg(MGMT_TX_ZONE, "%s: Sending VAP capabilities frame\n", __func__);
|
|
|
|
skb = dev_alloc_skb(frame_len);
|
|
if (!skb) {
|
|
rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
|
|
__func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memset(skb->data, 0, frame_len);
|
|
vap_caps = (struct rsi_vap_caps *)skb->data;
|
|
|
|
rsi_set_len_qno(&vap_caps->desc_dword0.len_qno,
|
|
(frame_len - FRAME_DESC_SZ), RSI_WIFI_MGMT_Q);
|
|
vap_caps->desc_dword0.frame_type = VAP_CAPABILITIES;
|
|
vap_caps->status = vap_status;
|
|
vap_caps->vif_type = mode;
|
|
vap_caps->channel_bw = common->channel_width;
|
|
vap_caps->vap_id = vap_id;
|
|
vap_caps->radioid_macid = ((common->mac_id & 0xf) << 4) |
|
|
(common->radio_id & 0xf);
|
|
|
|
memcpy(vap_caps->mac_addr, mac_addr, IEEE80211_ADDR_LEN);
|
|
vap_caps->keep_alive_period = cpu_to_le16(90);
|
|
vap_caps->frag_threshold = cpu_to_le16(IEEE80211_MAX_FRAG_THRESHOLD);
|
|
|
|
vap_caps->rts_threshold = cpu_to_le16(common->rts_threshold);
|
|
|
|
if (common->band == NL80211_BAND_5GHZ) {
|
|
vap_caps->default_ctrl_rate = cpu_to_le16(RSI_RATE_6);
|
|
vap_caps->default_mgmt_rate = cpu_to_le32(RSI_RATE_6);
|
|
} else {
|
|
vap_caps->default_ctrl_rate = cpu_to_le16(RSI_RATE_1);
|
|
vap_caps->default_mgmt_rate = cpu_to_le32(RSI_RATE_1);
|
|
}
|
|
if (conf_is_ht40(conf)) {
|
|
if (conf_is_ht40_minus(conf))
|
|
vap_caps->ctrl_rate_flags =
|
|
cpu_to_le16(UPPER_20_ENABLE);
|
|
else if (conf_is_ht40_plus(conf))
|
|
vap_caps->ctrl_rate_flags =
|
|
cpu_to_le16(LOWER_20_ENABLE);
|
|
else
|
|
vap_caps->ctrl_rate_flags =
|
|
cpu_to_le16(FULL40M_ENABLE);
|
|
}
|
|
|
|
vap_caps->default_data_rate = 0;
|
|
vap_caps->beacon_interval = cpu_to_le16(common->beacon_interval);
|
|
vap_caps->dtim_period = cpu_to_le16(common->dtim_cnt);
|
|
|
|
skb_put(skb, frame_len);
|
|
|
|
return rsi_send_internal_mgmt_frame(common, skb);
|
|
}
|
|
|
|
/**
|
|
* rsi_hal_load_key() - This function is used to load keys within the firmware.
|
|
* @common: Pointer to the driver private structure.
|
|
* @data: Pointer to the key data.
|
|
* @key_len: Key length to be loaded.
|
|
* @key_type: Type of key: GROUP/PAIRWISE.
|
|
* @key_id: Key index.
|
|
* @cipher: Type of cipher used.
|
|
* @sta_id: Station id.
|
|
* @vif: Pointer to the ieee80211_vif structure.
|
|
*
|
|
* Return: 0 on success, -1 on failure.
|
|
*/
|
|
int rsi_hal_load_key(struct rsi_common *common,
|
|
u8 *data,
|
|
u16 key_len,
|
|
u8 key_type,
|
|
u8 key_id,
|
|
u32 cipher,
|
|
s16 sta_id,
|
|
struct ieee80211_vif *vif)
|
|
{
|
|
struct sk_buff *skb = NULL;
|
|
struct rsi_set_key *set_key;
|
|
u16 key_descriptor = 0;
|
|
u16 frame_len = sizeof(struct rsi_set_key);
|
|
|
|
rsi_dbg(MGMT_TX_ZONE, "%s: Sending load key frame\n", __func__);
|
|
|
|
skb = dev_alloc_skb(frame_len);
|
|
if (!skb) {
|
|
rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
|
|
__func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memset(skb->data, 0, frame_len);
|
|
set_key = (struct rsi_set_key *)skb->data;
|
|
|
|
if (key_type == RSI_GROUP_KEY) {
|
|
key_descriptor = RSI_KEY_TYPE_BROADCAST;
|
|
if (vif->type == NL80211_IFTYPE_AP)
|
|
key_descriptor |= RSI_KEY_MODE_AP;
|
|
}
|
|
if ((cipher == WLAN_CIPHER_SUITE_WEP40) ||
|
|
(cipher == WLAN_CIPHER_SUITE_WEP104)) {
|
|
key_id = 0;
|
|
key_descriptor |= RSI_WEP_KEY;
|
|
if (key_len >= 13)
|
|
key_descriptor |= RSI_WEP_KEY_104;
|
|
} else if (cipher != KEY_TYPE_CLEAR) {
|
|
key_descriptor |= RSI_CIPHER_WPA;
|
|
if (cipher == WLAN_CIPHER_SUITE_TKIP)
|
|
key_descriptor |= RSI_CIPHER_TKIP;
|
|
}
|
|
key_descriptor |= RSI_PROTECT_DATA_FRAMES;
|
|
key_descriptor |= (key_id << RSI_KEY_ID_OFFSET);
|
|
|
|
rsi_set_len_qno(&set_key->desc_dword0.len_qno,
|
|
(frame_len - FRAME_DESC_SZ), RSI_WIFI_MGMT_Q);
|
|
set_key->desc_dword0.frame_type = SET_KEY_REQ;
|
|
set_key->key_desc = cpu_to_le16(key_descriptor);
|
|
set_key->sta_id = sta_id;
|
|
|
|
if (data) {
|
|
if ((cipher == WLAN_CIPHER_SUITE_WEP40) ||
|
|
(cipher == WLAN_CIPHER_SUITE_WEP104)) {
|
|
memcpy(&set_key->key[key_id][1], data, key_len * 2);
|
|
} else {
|
|
memcpy(&set_key->key[0][0], data, key_len);
|
|
}
|
|
memcpy(set_key->tx_mic_key, &data[16], 8);
|
|
memcpy(set_key->rx_mic_key, &data[24], 8);
|
|
} else {
|
|
memset(&set_key[FRAME_DESC_SZ], 0, frame_len - FRAME_DESC_SZ);
|
|
}
|
|
|
|
skb_put(skb, frame_len);
|
|
|
|
return rsi_send_internal_mgmt_frame(common, skb);
|
|
}
|
|
|
|
/*
|
|
* This function sends the common device configuration parameters to device.
|
|
* This frame includes the useful information to make device works on
|
|
* specific operating mode.
|
|
*/
|
|
static int rsi_send_common_dev_params(struct rsi_common *common)
|
|
{
|
|
struct sk_buff *skb;
|
|
u16 frame_len;
|
|
struct rsi_config_vals *dev_cfgs;
|
|
|
|
frame_len = sizeof(struct rsi_config_vals);
|
|
|
|
rsi_dbg(MGMT_TX_ZONE, "Sending common device config params\n");
|
|
skb = dev_alloc_skb(frame_len);
|
|
if (!skb) {
|
|
rsi_dbg(ERR_ZONE, "%s: Unable to allocate skb\n", __func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memset(skb->data, 0, frame_len);
|
|
|
|
dev_cfgs = (struct rsi_config_vals *)skb->data;
|
|
memset(dev_cfgs, 0, (sizeof(struct rsi_config_vals)));
|
|
|
|
rsi_set_len_qno(&dev_cfgs->len_qno, (frame_len - FRAME_DESC_SZ),
|
|
RSI_COEX_Q);
|
|
dev_cfgs->pkt_type = COMMON_DEV_CONFIG;
|
|
|
|
dev_cfgs->lp_ps_handshake = common->lp_ps_handshake_mode;
|
|
dev_cfgs->ulp_ps_handshake = common->ulp_ps_handshake_mode;
|
|
|
|
dev_cfgs->unused_ulp_gpio = RSI_UNUSED_ULP_GPIO_BITMAP;
|
|
dev_cfgs->unused_soc_gpio_bitmap =
|
|
cpu_to_le32(RSI_UNUSED_SOC_GPIO_BITMAP);
|
|
|
|
dev_cfgs->opermode = common->oper_mode;
|
|
dev_cfgs->wlan_rf_pwr_mode = common->wlan_rf_power_mode;
|
|
dev_cfgs->driver_mode = common->driver_mode;
|
|
dev_cfgs->region_code = NL80211_DFS_FCC;
|
|
dev_cfgs->antenna_sel_val = common->obm_ant_sel_val;
|
|
|
|
skb_put(skb, frame_len);
|
|
|
|
return rsi_send_internal_mgmt_frame(common, skb);
|
|
}
|
|
|
|
/*
|
|
* rsi_load_bootup_params() - This function send bootup params to the firmware.
|
|
* @common: Pointer to the driver private structure.
|
|
*
|
|
* Return: 0 on success, corresponding error code on failure.
|
|
*/
|
|
static int rsi_load_bootup_params(struct rsi_common *common)
|
|
{
|
|
struct sk_buff *skb;
|
|
struct rsi_boot_params *boot_params;
|
|
|
|
rsi_dbg(MGMT_TX_ZONE, "%s: Sending boot params frame\n", __func__);
|
|
skb = dev_alloc_skb(sizeof(struct rsi_boot_params));
|
|
if (!skb) {
|
|
rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
|
|
__func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memset(skb->data, 0, sizeof(struct rsi_boot_params));
|
|
boot_params = (struct rsi_boot_params *)skb->data;
|
|
|
|
rsi_dbg(MGMT_TX_ZONE, "%s:\n", __func__);
|
|
|
|
if (common->channel_width == BW_40MHZ) {
|
|
memcpy(&boot_params->bootup_params,
|
|
&boot_params_40,
|
|
sizeof(struct bootup_params));
|
|
rsi_dbg(MGMT_TX_ZONE, "%s: Packet 40MHZ <=== %d\n", __func__,
|
|
UMAC_CLK_40BW);
|
|
boot_params->desc_word[7] = cpu_to_le16(UMAC_CLK_40BW);
|
|
} else {
|
|
memcpy(&boot_params->bootup_params,
|
|
&boot_params_20,
|
|
sizeof(struct bootup_params));
|
|
if (boot_params_20.valid != cpu_to_le32(VALID_20)) {
|
|
boot_params->desc_word[7] = cpu_to_le16(UMAC_CLK_20BW);
|
|
rsi_dbg(MGMT_TX_ZONE,
|
|
"%s: Packet 20MHZ <=== %d\n", __func__,
|
|
UMAC_CLK_20BW);
|
|
} else {
|
|
boot_params->desc_word[7] = cpu_to_le16(UMAC_CLK_40MHZ);
|
|
rsi_dbg(MGMT_TX_ZONE,
|
|
"%s: Packet 20MHZ <=== %d\n", __func__,
|
|
UMAC_CLK_40MHZ);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Bit{0:11} indicates length of the Packet
|
|
* Bit{12:15} indicates host queue number
|
|
*/
|
|
boot_params->desc_word[0] = cpu_to_le16(sizeof(struct bootup_params) |
|
|
(RSI_WIFI_MGMT_Q << 12));
|
|
boot_params->desc_word[1] = cpu_to_le16(BOOTUP_PARAMS_REQUEST);
|
|
|
|
skb_put(skb, sizeof(struct rsi_boot_params));
|
|
|
|
return rsi_send_internal_mgmt_frame(common, skb);
|
|
}
|
|
|
|
static int rsi_load_9116_bootup_params(struct rsi_common *common)
|
|
{
|
|
struct sk_buff *skb;
|
|
struct rsi_boot_params_9116 *boot_params;
|
|
|
|
rsi_dbg(MGMT_TX_ZONE, "%s: Sending boot params frame\n", __func__);
|
|
|
|
skb = dev_alloc_skb(sizeof(struct rsi_boot_params_9116));
|
|
if (!skb)
|
|
return -ENOMEM;
|
|
memset(skb->data, 0, sizeof(struct rsi_boot_params));
|
|
boot_params = (struct rsi_boot_params_9116 *)skb->data;
|
|
|
|
if (common->channel_width == BW_40MHZ) {
|
|
memcpy(&boot_params->bootup_params,
|
|
&boot_params_9116_40,
|
|
sizeof(struct bootup_params_9116));
|
|
rsi_dbg(MGMT_TX_ZONE, "%s: Packet 40MHZ <=== %d\n", __func__,
|
|
UMAC_CLK_40BW);
|
|
boot_params->umac_clk = cpu_to_le16(UMAC_CLK_40BW);
|
|
} else {
|
|
memcpy(&boot_params->bootup_params,
|
|
&boot_params_9116_20,
|
|
sizeof(struct bootup_params_9116));
|
|
if (boot_params_20.valid != cpu_to_le32(VALID_20)) {
|
|
boot_params->umac_clk = cpu_to_le16(UMAC_CLK_20BW);
|
|
rsi_dbg(MGMT_TX_ZONE,
|
|
"%s: Packet 20MHZ <=== %d\n", __func__,
|
|
UMAC_CLK_20BW);
|
|
} else {
|
|
boot_params->umac_clk = cpu_to_le16(UMAC_CLK_40MHZ);
|
|
rsi_dbg(MGMT_TX_ZONE,
|
|
"%s: Packet 20MHZ <=== %d\n", __func__,
|
|
UMAC_CLK_40MHZ);
|
|
}
|
|
}
|
|
rsi_set_len_qno(&boot_params->desc_dword0.len_qno,
|
|
sizeof(struct bootup_params_9116), RSI_WIFI_MGMT_Q);
|
|
boot_params->desc_dword0.frame_type = BOOTUP_PARAMS_REQUEST;
|
|
skb_put(skb, sizeof(struct rsi_boot_params_9116));
|
|
|
|
return rsi_send_internal_mgmt_frame(common, skb);
|
|
}
|
|
|
|
/**
|
|
* rsi_send_reset_mac() - This function prepares reset MAC request and sends an
|
|
* internal management frame to indicate it to firmware.
|
|
* @common: Pointer to the driver private structure.
|
|
*
|
|
* Return: 0 on success, corresponding error code on failure.
|
|
*/
|
|
static int rsi_send_reset_mac(struct rsi_common *common)
|
|
{
|
|
struct sk_buff *skb;
|
|
struct rsi_mac_frame *mgmt_frame;
|
|
|
|
rsi_dbg(MGMT_TX_ZONE, "%s: Sending reset MAC frame\n", __func__);
|
|
|
|
skb = dev_alloc_skb(FRAME_DESC_SZ);
|
|
if (!skb) {
|
|
rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
|
|
__func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memset(skb->data, 0, FRAME_DESC_SZ);
|
|
mgmt_frame = (struct rsi_mac_frame *)skb->data;
|
|
|
|
mgmt_frame->desc_word[0] = cpu_to_le16(RSI_WIFI_MGMT_Q << 12);
|
|
mgmt_frame->desc_word[1] = cpu_to_le16(RESET_MAC_REQ);
|
|
mgmt_frame->desc_word[4] = cpu_to_le16(RETRY_COUNT << 8);
|
|
|
|
#define RSI_9116_DEF_TA_AGGR 3
|
|
if (common->priv->device_model == RSI_DEV_9116)
|
|
mgmt_frame->desc_word[3] |=
|
|
cpu_to_le16(RSI_9116_DEF_TA_AGGR << 8);
|
|
|
|
skb_put(skb, FRAME_DESC_SZ);
|
|
|
|
return rsi_send_internal_mgmt_frame(common, skb);
|
|
}
|
|
|
|
/**
|
|
* rsi_band_check() - This function programs the band
|
|
* @common: Pointer to the driver private structure.
|
|
* @curchan: Pointer to the current channel structure.
|
|
*
|
|
* Return: 0 on success, corresponding error code on failure.
|
|
*/
|
|
int rsi_band_check(struct rsi_common *common,
|
|
struct ieee80211_channel *curchan)
|
|
{
|
|
struct rsi_hw *adapter = common->priv;
|
|
struct ieee80211_hw *hw = adapter->hw;
|
|
u8 prev_bw = common->channel_width;
|
|
u8 prev_ep = common->endpoint;
|
|
int status = 0;
|
|
|
|
if (common->band != curchan->band) {
|
|
common->rf_reset = 1;
|
|
common->band = curchan->band;
|
|
}
|
|
|
|
if ((hw->conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT) ||
|
|
(hw->conf.chandef.width == NL80211_CHAN_WIDTH_20))
|
|
common->channel_width = BW_20MHZ;
|
|
else
|
|
common->channel_width = BW_40MHZ;
|
|
|
|
if (common->band == NL80211_BAND_2GHZ) {
|
|
if (common->channel_width)
|
|
common->endpoint = EP_2GHZ_40MHZ;
|
|
else
|
|
common->endpoint = EP_2GHZ_20MHZ;
|
|
} else {
|
|
if (common->channel_width)
|
|
common->endpoint = EP_5GHZ_40MHZ;
|
|
else
|
|
common->endpoint = EP_5GHZ_20MHZ;
|
|
}
|
|
|
|
if (common->endpoint != prev_ep) {
|
|
status = rsi_program_bb_rf(common);
|
|
if (status)
|
|
return status;
|
|
}
|
|
|
|
if (common->channel_width != prev_bw) {
|
|
if (adapter->device_model == RSI_DEV_9116)
|
|
status = rsi_load_9116_bootup_params(common);
|
|
else
|
|
status = rsi_load_bootup_params(common);
|
|
if (status)
|
|
return status;
|
|
|
|
status = rsi_load_radio_caps(common);
|
|
if (status)
|
|
return status;
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* rsi_set_channel() - This function programs the channel.
|
|
* @common: Pointer to the driver private structure.
|
|
* @channel: Channel value to be set.
|
|
*
|
|
* Return: 0 on success, corresponding error code on failure.
|
|
*/
|
|
int rsi_set_channel(struct rsi_common *common,
|
|
struct ieee80211_channel *channel)
|
|
{
|
|
struct sk_buff *skb = NULL;
|
|
struct rsi_chan_config *chan_cfg;
|
|
u16 frame_len = sizeof(struct rsi_chan_config);
|
|
|
|
rsi_dbg(MGMT_TX_ZONE,
|
|
"%s: Sending scan req frame\n", __func__);
|
|
|
|
skb = dev_alloc_skb(frame_len);
|
|
if (!skb) {
|
|
rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
|
|
__func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (!channel) {
|
|
dev_kfree_skb(skb);
|
|
return 0;
|
|
}
|
|
memset(skb->data, 0, frame_len);
|
|
chan_cfg = (struct rsi_chan_config *)skb->data;
|
|
|
|
rsi_set_len_qno(&chan_cfg->desc_dword0.len_qno, 0, RSI_WIFI_MGMT_Q);
|
|
chan_cfg->desc_dword0.frame_type = SCAN_REQUEST;
|
|
chan_cfg->channel_number = channel->hw_value;
|
|
chan_cfg->antenna_gain_offset_2g = channel->max_antenna_gain;
|
|
chan_cfg->antenna_gain_offset_5g = channel->max_antenna_gain;
|
|
chan_cfg->region_rftype = (RSI_RF_TYPE & 0xf) << 4;
|
|
|
|
if ((channel->flags & IEEE80211_CHAN_NO_IR) ||
|
|
(channel->flags & IEEE80211_CHAN_RADAR)) {
|
|
chan_cfg->antenna_gain_offset_2g |= RSI_CHAN_RADAR;
|
|
} else {
|
|
if (common->tx_power < channel->max_power)
|
|
chan_cfg->tx_power = cpu_to_le16(common->tx_power);
|
|
else
|
|
chan_cfg->tx_power = cpu_to_le16(channel->max_power);
|
|
}
|
|
chan_cfg->region_rftype |= (common->priv->dfs_region & 0xf);
|
|
|
|
if (common->channel_width == BW_40MHZ)
|
|
chan_cfg->channel_width = 0x1;
|
|
|
|
common->channel = channel->hw_value;
|
|
|
|
skb_put(skb, frame_len);
|
|
|
|
return rsi_send_internal_mgmt_frame(common, skb);
|
|
}
|
|
|
|
/**
|
|
* rsi_send_radio_params_update() - This function sends the radio
|
|
* parameters update to device
|
|
* @common: Pointer to the driver private structure.
|
|
*
|
|
* Return: 0 on success, corresponding error code on failure.
|
|
*/
|
|
int rsi_send_radio_params_update(struct rsi_common *common)
|
|
{
|
|
struct rsi_mac_frame *cmd_frame;
|
|
struct sk_buff *skb = NULL;
|
|
|
|
rsi_dbg(MGMT_TX_ZONE,
|
|
"%s: Sending Radio Params update frame\n", __func__);
|
|
|
|
skb = dev_alloc_skb(FRAME_DESC_SZ);
|
|
if (!skb) {
|
|
rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
|
|
__func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memset(skb->data, 0, FRAME_DESC_SZ);
|
|
cmd_frame = (struct rsi_mac_frame *)skb->data;
|
|
|
|
cmd_frame->desc_word[0] = cpu_to_le16(RSI_WIFI_MGMT_Q << 12);
|
|
cmd_frame->desc_word[1] = cpu_to_le16(RADIO_PARAMS_UPDATE);
|
|
cmd_frame->desc_word[3] = cpu_to_le16(BIT(0));
|
|
|
|
cmd_frame->desc_word[3] |= cpu_to_le16(common->tx_power << 8);
|
|
|
|
skb_put(skb, FRAME_DESC_SZ);
|
|
|
|
return rsi_send_internal_mgmt_frame(common, skb);
|
|
}
|
|
|
|
/* This function programs the threshold. */
|
|
int rsi_send_vap_dynamic_update(struct rsi_common *common)
|
|
{
|
|
struct sk_buff *skb;
|
|
struct rsi_dynamic_s *dynamic_frame;
|
|
|
|
rsi_dbg(MGMT_TX_ZONE,
|
|
"%s: Sending vap update indication frame\n", __func__);
|
|
|
|
skb = dev_alloc_skb(sizeof(struct rsi_dynamic_s));
|
|
if (!skb)
|
|
return -ENOMEM;
|
|
|
|
memset(skb->data, 0, sizeof(struct rsi_dynamic_s));
|
|
dynamic_frame = (struct rsi_dynamic_s *)skb->data;
|
|
rsi_set_len_qno(&dynamic_frame->desc_dword0.len_qno,
|
|
sizeof(dynamic_frame->frame_body), RSI_WIFI_MGMT_Q);
|
|
|
|
dynamic_frame->desc_dword0.frame_type = VAP_DYNAMIC_UPDATE;
|
|
dynamic_frame->desc_dword2.pkt_info =
|
|
cpu_to_le32(common->rts_threshold);
|
|
|
|
if (common->wow_flags & RSI_WOW_ENABLED) {
|
|
/* Beacon miss threshold */
|
|
dynamic_frame->desc_dword3.token =
|
|
cpu_to_le16(RSI_BCN_MISS_THRESHOLD);
|
|
dynamic_frame->frame_body.keep_alive_period =
|
|
cpu_to_le16(RSI_WOW_KEEPALIVE);
|
|
} else {
|
|
dynamic_frame->frame_body.keep_alive_period =
|
|
cpu_to_le16(RSI_DEF_KEEPALIVE);
|
|
}
|
|
|
|
dynamic_frame->desc_dword3.sta_id = 0; /* vap id */
|
|
|
|
skb_put(skb, sizeof(struct rsi_dynamic_s));
|
|
|
|
return rsi_send_internal_mgmt_frame(common, skb);
|
|
}
|
|
|
|
/**
|
|
* rsi_compare() - This function is used to compare two integers
|
|
* @a: pointer to the first integer
|
|
* @b: pointer to the second integer
|
|
*
|
|
* Return: 0 if both are equal, -1 if the first is smaller, else 1
|
|
*/
|
|
static int rsi_compare(const void *a, const void *b)
|
|
{
|
|
u16 _a = *(const u16 *)(a);
|
|
u16 _b = *(const u16 *)(b);
|
|
|
|
if (_a > _b)
|
|
return -1;
|
|
|
|
if (_a < _b)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* rsi_map_rates() - This function is used to map selected rates to hw rates.
|
|
* @rate: The standard rate to be mapped.
|
|
* @offset: Offset that will be returned.
|
|
*
|
|
* Return: 0 if it is a mcs rate, else 1
|
|
*/
|
|
static bool rsi_map_rates(u16 rate, int *offset)
|
|
{
|
|
int kk;
|
|
for (kk = 0; kk < ARRAY_SIZE(rsi_mcsrates); kk++) {
|
|
if (rate == mcs[kk]) {
|
|
*offset = kk;
|
|
return false;
|
|
}
|
|
}
|
|
|
|
for (kk = 0; kk < ARRAY_SIZE(rsi_rates); kk++) {
|
|
if (rate == rsi_rates[kk].bitrate / 5) {
|
|
*offset = kk;
|
|
break;
|
|
}
|
|
}
|
|
return true;
|
|
}
|
|
|
|
/**
|
|
* rsi_send_auto_rate_request() - This function is to set rates for connection
|
|
* and send autorate request to firmware.
|
|
* @common: Pointer to the driver private structure.
|
|
* @sta: mac80211 station.
|
|
* @sta_id: station id.
|
|
* @vif: Pointer to the ieee80211_vif structure.
|
|
*
|
|
* Return: 0 on success, corresponding error code on failure.
|
|
*/
|
|
static int rsi_send_auto_rate_request(struct rsi_common *common,
|
|
struct ieee80211_sta *sta,
|
|
u16 sta_id,
|
|
struct ieee80211_vif *vif)
|
|
{
|
|
struct sk_buff *skb;
|
|
struct rsi_auto_rate *auto_rate;
|
|
int ii = 0, jj = 0, kk = 0;
|
|
struct ieee80211_hw *hw = common->priv->hw;
|
|
u8 band = hw->conf.chandef.chan->band;
|
|
u8 num_supported_rates = 0;
|
|
u8 rate_table_offset, rate_offset = 0;
|
|
u32 rate_bitmap, configured_rates;
|
|
u16 *selected_rates, min_rate;
|
|
bool is_ht = false, is_sgi = false;
|
|
u16 frame_len = sizeof(struct rsi_auto_rate);
|
|
|
|
rsi_dbg(MGMT_TX_ZONE,
|
|
"%s: Sending auto rate request frame\n", __func__);
|
|
|
|
skb = dev_alloc_skb(frame_len);
|
|
if (!skb) {
|
|
rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
|
|
__func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memset(skb->data, 0, frame_len);
|
|
selected_rates = kzalloc(2 * RSI_TBL_SZ, GFP_KERNEL);
|
|
if (!selected_rates) {
|
|
rsi_dbg(ERR_ZONE, "%s: Failed in allocation of mem\n",
|
|
__func__);
|
|
dev_kfree_skb(skb);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
auto_rate = (struct rsi_auto_rate *)skb->data;
|
|
|
|
auto_rate->aarf_rssi = cpu_to_le16(((u16)3 << 6) | (u16)(18 & 0x3f));
|
|
auto_rate->collision_tolerance = cpu_to_le16(3);
|
|
auto_rate->failure_limit = cpu_to_le16(3);
|
|
auto_rate->initial_boundary = cpu_to_le16(3);
|
|
auto_rate->max_threshold_limt = cpu_to_le16(27);
|
|
|
|
auto_rate->desc.desc_dword0.frame_type = AUTO_RATE_IND;
|
|
|
|
if (common->channel_width == BW_40MHZ)
|
|
auto_rate->desc.desc_dword3.qid_tid = BW_40MHZ;
|
|
auto_rate->desc.desc_dword3.sta_id = sta_id;
|
|
|
|
if (vif->type == NL80211_IFTYPE_STATION) {
|
|
rate_bitmap = common->bitrate_mask[band];
|
|
is_ht = common->vif_info[0].is_ht;
|
|
is_sgi = common->vif_info[0].sgi;
|
|
} else {
|
|
rate_bitmap = sta->deflink.supp_rates[band];
|
|
is_ht = sta->deflink.ht_cap.ht_supported;
|
|
if ((sta->deflink.ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ||
|
|
(sta->deflink.ht_cap.cap & IEEE80211_HT_CAP_SGI_40))
|
|
is_sgi = true;
|
|
}
|
|
|
|
/* Limit to any rates administratively configured by cfg80211 */
|
|
configured_rates = common->rate_config[band].configured_mask ?: 0xffffffff;
|
|
rate_bitmap &= configured_rates;
|
|
|
|
if (band == NL80211_BAND_2GHZ) {
|
|
if ((rate_bitmap == 0) && (is_ht))
|
|
min_rate = RSI_RATE_MCS0;
|
|
else
|
|
min_rate = RSI_RATE_1;
|
|
rate_table_offset = 0;
|
|
} else {
|
|
if ((rate_bitmap == 0) && (is_ht))
|
|
min_rate = RSI_RATE_MCS0;
|
|
else
|
|
min_rate = RSI_RATE_6;
|
|
rate_table_offset = 4;
|
|
}
|
|
|
|
for (ii = 0, jj = 0;
|
|
ii < (ARRAY_SIZE(rsi_rates) - rate_table_offset); ii++) {
|
|
if (rate_bitmap & BIT(ii)) {
|
|
selected_rates[jj++] =
|
|
(rsi_rates[ii + rate_table_offset].bitrate / 5);
|
|
rate_offset++;
|
|
}
|
|
}
|
|
num_supported_rates = jj;
|
|
|
|
if (is_ht) {
|
|
for (ii = 0; ii < ARRAY_SIZE(mcs); ii++) {
|
|
if (configured_rates & BIT(ii + ARRAY_SIZE(rsi_rates))) {
|
|
selected_rates[jj++] = mcs[ii];
|
|
num_supported_rates++;
|
|
rate_offset++;
|
|
}
|
|
}
|
|
}
|
|
|
|
sort(selected_rates, jj, sizeof(u16), &rsi_compare, NULL);
|
|
|
|
/* mapping the rates to RSI rates */
|
|
for (ii = 0; ii < jj; ii++) {
|
|
if (rsi_map_rates(selected_rates[ii], &kk)) {
|
|
auto_rate->supported_rates[ii] =
|
|
cpu_to_le16(rsi_rates[kk].hw_value);
|
|
} else {
|
|
auto_rate->supported_rates[ii] =
|
|
cpu_to_le16(rsi_mcsrates[kk]);
|
|
}
|
|
}
|
|
|
|
/* loading HT rates in the bottom half of the auto rate table */
|
|
if (is_ht) {
|
|
for (ii = rate_offset, kk = ARRAY_SIZE(rsi_mcsrates) - 1;
|
|
ii < rate_offset + 2 * ARRAY_SIZE(rsi_mcsrates); ii++) {
|
|
if (is_sgi || conf_is_ht40(&common->priv->hw->conf))
|
|
auto_rate->supported_rates[ii++] =
|
|
cpu_to_le16(rsi_mcsrates[kk] | BIT(9));
|
|
else
|
|
auto_rate->supported_rates[ii++] =
|
|
cpu_to_le16(rsi_mcsrates[kk]);
|
|
auto_rate->supported_rates[ii] =
|
|
cpu_to_le16(rsi_mcsrates[kk--]);
|
|
}
|
|
|
|
for (; ii < (RSI_TBL_SZ - 1); ii++) {
|
|
auto_rate->supported_rates[ii] =
|
|
cpu_to_le16(rsi_mcsrates[0]);
|
|
}
|
|
}
|
|
|
|
for (; ii < RSI_TBL_SZ; ii++)
|
|
auto_rate->supported_rates[ii] = cpu_to_le16(min_rate);
|
|
|
|
auto_rate->num_supported_rates = cpu_to_le16(num_supported_rates * 2);
|
|
auto_rate->moderate_rate_inx = cpu_to_le16(num_supported_rates / 2);
|
|
num_supported_rates *= 2;
|
|
|
|
rsi_set_len_qno(&auto_rate->desc.desc_dword0.len_qno,
|
|
(frame_len - FRAME_DESC_SZ), RSI_WIFI_MGMT_Q);
|
|
|
|
skb_put(skb, frame_len);
|
|
kfree(selected_rates);
|
|
|
|
return rsi_send_internal_mgmt_frame(common, skb);
|
|
}
|
|
|
|
/**
|
|
* rsi_inform_bss_status() - This function informs about bss status with the
|
|
* help of sta notify params by sending an internal
|
|
* management frame to firmware.
|
|
* @common: Pointer to the driver private structure.
|
|
* @opmode: Operating mode of device.
|
|
* @status: Bss status type.
|
|
* @addr: Address of the register.
|
|
* @qos_enable: Qos is enabled.
|
|
* @aid: Aid (unique for all STAs).
|
|
* @sta: mac80211 station.
|
|
* @sta_id: station id.
|
|
* @assoc_cap: capabilities.
|
|
* @vif: Pointer to the ieee80211_vif structure.
|
|
*
|
|
* Return: None.
|
|
*/
|
|
void rsi_inform_bss_status(struct rsi_common *common,
|
|
enum opmode opmode,
|
|
u8 status,
|
|
const u8 *addr,
|
|
u8 qos_enable,
|
|
u16 aid,
|
|
struct ieee80211_sta *sta,
|
|
u16 sta_id,
|
|
u16 assoc_cap,
|
|
struct ieee80211_vif *vif)
|
|
{
|
|
if (status) {
|
|
if (opmode == RSI_OPMODE_STA)
|
|
common->hw_data_qs_blocked = true;
|
|
rsi_hal_send_sta_notify_frame(common,
|
|
opmode,
|
|
STA_CONNECTED,
|
|
addr,
|
|
qos_enable,
|
|
aid, sta_id,
|
|
vif);
|
|
if (!common->rate_config[common->band].fixed_enabled)
|
|
rsi_send_auto_rate_request(common, sta, sta_id, vif);
|
|
if (opmode == RSI_OPMODE_STA &&
|
|
!(assoc_cap & WLAN_CAPABILITY_PRIVACY) &&
|
|
!rsi_send_block_unblock_frame(common, false))
|
|
common->hw_data_qs_blocked = false;
|
|
} else {
|
|
if (opmode == RSI_OPMODE_STA)
|
|
common->hw_data_qs_blocked = true;
|
|
|
|
if (!(common->wow_flags & RSI_WOW_ENABLED))
|
|
rsi_hal_send_sta_notify_frame(common, opmode,
|
|
STA_DISCONNECTED, addr,
|
|
qos_enable, aid, sta_id,
|
|
vif);
|
|
if (opmode == RSI_OPMODE_STA)
|
|
rsi_send_block_unblock_frame(common, true);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* rsi_eeprom_read() - This function sends a frame to read the mac address
|
|
* from the eeprom.
|
|
* @common: Pointer to the driver private structure.
|
|
*
|
|
* Return: 0 on success, -1 on failure.
|
|
*/
|
|
static int rsi_eeprom_read(struct rsi_common *common)
|
|
{
|
|
struct rsi_eeprom_read_frame *mgmt_frame;
|
|
struct rsi_hw *adapter = common->priv;
|
|
struct sk_buff *skb;
|
|
|
|
rsi_dbg(MGMT_TX_ZONE, "%s: Sending EEPROM read req frame\n", __func__);
|
|
|
|
skb = dev_alloc_skb(FRAME_DESC_SZ);
|
|
if (!skb) {
|
|
rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
|
|
__func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memset(skb->data, 0, FRAME_DESC_SZ);
|
|
mgmt_frame = (struct rsi_eeprom_read_frame *)skb->data;
|
|
|
|
/* FrameType */
|
|
rsi_set_len_qno(&mgmt_frame->len_qno, 0, RSI_WIFI_MGMT_Q);
|
|
mgmt_frame->pkt_type = EEPROM_READ;
|
|
|
|
/* Number of bytes to read */
|
|
mgmt_frame->pkt_info =
|
|
cpu_to_le32((adapter->eeprom.length << RSI_EEPROM_LEN_OFFSET) &
|
|
RSI_EEPROM_LEN_MASK);
|
|
mgmt_frame->pkt_info |= cpu_to_le32((3 << RSI_EEPROM_HDR_SIZE_OFFSET) &
|
|
RSI_EEPROM_HDR_SIZE_MASK);
|
|
|
|
/* Address to read */
|
|
mgmt_frame->eeprom_offset = cpu_to_le32(adapter->eeprom.offset);
|
|
|
|
skb_put(skb, FRAME_DESC_SZ);
|
|
|
|
return rsi_send_internal_mgmt_frame(common, skb);
|
|
}
|
|
|
|
/**
|
|
* rsi_send_block_unblock_frame() - This function sends a frame to block/unblock
|
|
* data queues in the firmware
|
|
*
|
|
* @common: Pointer to the driver private structure.
|
|
* @block_event: Event block if true, unblock if false
|
|
* returns 0 on success, -1 on failure.
|
|
*/
|
|
int rsi_send_block_unblock_frame(struct rsi_common *common, bool block_event)
|
|
{
|
|
struct rsi_block_unblock_data *mgmt_frame;
|
|
struct sk_buff *skb;
|
|
|
|
rsi_dbg(MGMT_TX_ZONE, "%s: Sending block/unblock frame\n", __func__);
|
|
|
|
skb = dev_alloc_skb(FRAME_DESC_SZ);
|
|
if (!skb) {
|
|
rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
|
|
__func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memset(skb->data, 0, FRAME_DESC_SZ);
|
|
mgmt_frame = (struct rsi_block_unblock_data *)skb->data;
|
|
|
|
rsi_set_len_qno(&mgmt_frame->desc_dword0.len_qno, 0, RSI_WIFI_MGMT_Q);
|
|
mgmt_frame->desc_dword0.frame_type = BLOCK_HW_QUEUE;
|
|
mgmt_frame->host_quiet_info = QUIET_INFO_VALID;
|
|
|
|
if (block_event) {
|
|
rsi_dbg(INFO_ZONE, "blocking the data qs\n");
|
|
mgmt_frame->block_q_bitmap = cpu_to_le16(0xf);
|
|
mgmt_frame->block_q_bitmap |= cpu_to_le16(0xf << 4);
|
|
} else {
|
|
rsi_dbg(INFO_ZONE, "unblocking the data qs\n");
|
|
mgmt_frame->unblock_q_bitmap = cpu_to_le16(0xf);
|
|
mgmt_frame->unblock_q_bitmap |= cpu_to_le16(0xf << 4);
|
|
}
|
|
|
|
skb_put(skb, FRAME_DESC_SZ);
|
|
|
|
return rsi_send_internal_mgmt_frame(common, skb);
|
|
}
|
|
|
|
/**
|
|
* rsi_send_rx_filter_frame() - Sends a frame to filter the RX packets
|
|
*
|
|
* @common: Pointer to the driver private structure.
|
|
* @rx_filter_word: Flags of filter packets
|
|
*
|
|
* Returns 0 on success, -1 on failure.
|
|
*/
|
|
int rsi_send_rx_filter_frame(struct rsi_common *common, u16 rx_filter_word)
|
|
{
|
|
struct rsi_mac_frame *cmd_frame;
|
|
struct sk_buff *skb;
|
|
|
|
rsi_dbg(MGMT_TX_ZONE, "Sending RX filter frame\n");
|
|
|
|
skb = dev_alloc_skb(FRAME_DESC_SZ);
|
|
if (!skb) {
|
|
rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
|
|
__func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memset(skb->data, 0, FRAME_DESC_SZ);
|
|
cmd_frame = (struct rsi_mac_frame *)skb->data;
|
|
|
|
cmd_frame->desc_word[0] = cpu_to_le16(RSI_WIFI_MGMT_Q << 12);
|
|
cmd_frame->desc_word[1] = cpu_to_le16(SET_RX_FILTER);
|
|
cmd_frame->desc_word[4] = cpu_to_le16(rx_filter_word);
|
|
|
|
skb_put(skb, FRAME_DESC_SZ);
|
|
|
|
return rsi_send_internal_mgmt_frame(common, skb);
|
|
}
|
|
|
|
int rsi_send_ps_request(struct rsi_hw *adapter, bool enable,
|
|
struct ieee80211_vif *vif)
|
|
{
|
|
struct rsi_common *common = adapter->priv;
|
|
struct ieee80211_bss_conf *bss = &vif->bss_conf;
|
|
struct rsi_request_ps *ps;
|
|
struct rsi_ps_info *ps_info;
|
|
struct sk_buff *skb;
|
|
int frame_len = sizeof(*ps);
|
|
|
|
skb = dev_alloc_skb(frame_len);
|
|
if (!skb)
|
|
return -ENOMEM;
|
|
memset(skb->data, 0, frame_len);
|
|
|
|
ps = (struct rsi_request_ps *)skb->data;
|
|
ps_info = &adapter->ps_info;
|
|
|
|
rsi_set_len_qno(&ps->desc.desc_dword0.len_qno,
|
|
(frame_len - FRAME_DESC_SZ), RSI_WIFI_MGMT_Q);
|
|
ps->desc.desc_dword0.frame_type = WAKEUP_SLEEP_REQUEST;
|
|
if (enable) {
|
|
ps->ps_sleep.enable = RSI_PS_ENABLE;
|
|
ps->desc.desc_dword3.token = cpu_to_le16(RSI_SLEEP_REQUEST);
|
|
} else {
|
|
ps->ps_sleep.enable = RSI_PS_DISABLE;
|
|
ps->desc.desc_dword0.len_qno |= cpu_to_le16(RSI_PS_DISABLE_IND);
|
|
ps->desc.desc_dword3.token = cpu_to_le16(RSI_WAKEUP_REQUEST);
|
|
}
|
|
|
|
ps->ps_uapsd_acs = common->uapsd_bitmap;
|
|
|
|
ps->ps_sleep.sleep_type = ps_info->sleep_type;
|
|
ps->ps_sleep.num_bcns_per_lis_int =
|
|
cpu_to_le16(ps_info->num_bcns_per_lis_int);
|
|
ps->ps_sleep.sleep_duration =
|
|
cpu_to_le32(ps_info->deep_sleep_wakeup_period);
|
|
|
|
if (bss->assoc)
|
|
ps->ps_sleep.connected_sleep = RSI_CONNECTED_SLEEP;
|
|
else
|
|
ps->ps_sleep.connected_sleep = RSI_DEEP_SLEEP;
|
|
|
|
ps->ps_listen_interval = cpu_to_le32(ps_info->listen_interval);
|
|
ps->ps_dtim_interval_duration =
|
|
cpu_to_le32(ps_info->dtim_interval_duration);
|
|
|
|
if (ps_info->listen_interval > ps_info->dtim_interval_duration)
|
|
ps->ps_listen_interval = cpu_to_le32(RSI_PS_DISABLE);
|
|
|
|
ps->ps_num_dtim_intervals = cpu_to_le16(ps_info->num_dtims_per_sleep);
|
|
skb_put(skb, frame_len);
|
|
|
|
return rsi_send_internal_mgmt_frame(common, skb);
|
|
}
|
|
|
|
static int rsi_send_w9116_features(struct rsi_common *common)
|
|
{
|
|
struct rsi_wlan_9116_features *w9116_features;
|
|
u16 frame_len = sizeof(struct rsi_wlan_9116_features);
|
|
struct sk_buff *skb;
|
|
|
|
rsi_dbg(MGMT_TX_ZONE,
|
|
"%s: Sending wlan 9116 features\n", __func__);
|
|
|
|
skb = dev_alloc_skb(frame_len);
|
|
if (!skb)
|
|
return -ENOMEM;
|
|
memset(skb->data, 0, frame_len);
|
|
|
|
w9116_features = (struct rsi_wlan_9116_features *)skb->data;
|
|
|
|
w9116_features->pll_mode = common->w9116_features.pll_mode;
|
|
w9116_features->rf_type = common->w9116_features.rf_type;
|
|
w9116_features->wireless_mode = common->w9116_features.wireless_mode;
|
|
w9116_features->enable_ppe = common->w9116_features.enable_ppe;
|
|
w9116_features->afe_type = common->w9116_features.afe_type;
|
|
if (common->w9116_features.dpd)
|
|
w9116_features->feature_enable |= cpu_to_le32(RSI_DPD);
|
|
if (common->w9116_features.sifs_tx_enable)
|
|
w9116_features->feature_enable |=
|
|
cpu_to_le32(RSI_SIFS_TX_ENABLE);
|
|
if (common->w9116_features.ps_options & RSI_DUTY_CYCLING)
|
|
w9116_features->feature_enable |= cpu_to_le32(RSI_DUTY_CYCLING);
|
|
if (common->w9116_features.ps_options & RSI_END_OF_FRAME)
|
|
w9116_features->feature_enable |= cpu_to_le32(RSI_END_OF_FRAME);
|
|
w9116_features->feature_enable |=
|
|
cpu_to_le32((common->w9116_features.ps_options & ~0x3) << 2);
|
|
|
|
rsi_set_len_qno(&w9116_features->desc.desc_dword0.len_qno,
|
|
frame_len - FRAME_DESC_SZ, RSI_WIFI_MGMT_Q);
|
|
w9116_features->desc.desc_dword0.frame_type = FEATURES_ENABLE;
|
|
skb_put(skb, frame_len);
|
|
|
|
return rsi_send_internal_mgmt_frame(common, skb);
|
|
}
|
|
|
|
/**
|
|
* rsi_set_antenna() - This function send antenna configuration request
|
|
* to device
|
|
*
|
|
* @common: Pointer to the driver private structure.
|
|
* @antenna: bitmap for tx antenna selection
|
|
*
|
|
* Return: 0 on Success, negative error code on failure
|
|
*/
|
|
int rsi_set_antenna(struct rsi_common *common, u8 antenna)
|
|
{
|
|
struct rsi_ant_sel_frame *ant_sel_frame;
|
|
struct sk_buff *skb;
|
|
|
|
skb = dev_alloc_skb(FRAME_DESC_SZ);
|
|
if (!skb) {
|
|
rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
|
|
__func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memset(skb->data, 0, FRAME_DESC_SZ);
|
|
|
|
ant_sel_frame = (struct rsi_ant_sel_frame *)skb->data;
|
|
ant_sel_frame->desc_dword0.frame_type = ANT_SEL_FRAME;
|
|
ant_sel_frame->sub_frame_type = ANTENNA_SEL_TYPE;
|
|
ant_sel_frame->ant_value = cpu_to_le16(antenna & ANTENNA_MASK_VALUE);
|
|
rsi_set_len_qno(&ant_sel_frame->desc_dword0.len_qno,
|
|
0, RSI_WIFI_MGMT_Q);
|
|
skb_put(skb, FRAME_DESC_SZ);
|
|
|
|
return rsi_send_internal_mgmt_frame(common, skb);
|
|
}
|
|
|
|
static int rsi_send_beacon(struct rsi_common *common)
|
|
{
|
|
struct sk_buff *skb = NULL;
|
|
u8 dword_align_bytes = 0;
|
|
|
|
skb = dev_alloc_skb(MAX_MGMT_PKT_SIZE);
|
|
if (!skb)
|
|
return -ENOMEM;
|
|
|
|
memset(skb->data, 0, MAX_MGMT_PKT_SIZE);
|
|
|
|
dword_align_bytes = ((unsigned long)skb->data & 0x3f);
|
|
if (dword_align_bytes)
|
|
skb_pull(skb, (64 - dword_align_bytes));
|
|
if (rsi_prepare_beacon(common, skb)) {
|
|
rsi_dbg(ERR_ZONE, "Failed to prepare beacon\n");
|
|
dev_kfree_skb(skb);
|
|
return -EINVAL;
|
|
}
|
|
skb_queue_tail(&common->tx_queue[MGMT_BEACON_Q], skb);
|
|
rsi_set_event(&common->tx_thread.event);
|
|
rsi_dbg(DATA_TX_ZONE, "%s: Added to beacon queue\n", __func__);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
int rsi_send_wowlan_request(struct rsi_common *common, u16 flags,
|
|
u16 sleep_status)
|
|
{
|
|
struct rsi_wowlan_req *cmd_frame;
|
|
struct sk_buff *skb;
|
|
u8 length;
|
|
|
|
rsi_dbg(ERR_ZONE, "%s: Sending wowlan request frame\n", __func__);
|
|
|
|
length = sizeof(*cmd_frame);
|
|
skb = dev_alloc_skb(length);
|
|
if (!skb)
|
|
return -ENOMEM;
|
|
memset(skb->data, 0, length);
|
|
cmd_frame = (struct rsi_wowlan_req *)skb->data;
|
|
|
|
rsi_set_len_qno(&cmd_frame->desc.desc_dword0.len_qno,
|
|
(length - FRAME_DESC_SZ),
|
|
RSI_WIFI_MGMT_Q);
|
|
cmd_frame->desc.desc_dword0.frame_type = WOWLAN_CONFIG_PARAMS;
|
|
cmd_frame->host_sleep_status = sleep_status;
|
|
if (common->secinfo.gtk_cipher)
|
|
flags |= RSI_WOW_GTK_REKEY;
|
|
if (sleep_status)
|
|
cmd_frame->wow_flags = flags;
|
|
rsi_dbg(INFO_ZONE, "Host_Sleep_Status : %d Flags : %d\n",
|
|
cmd_frame->host_sleep_status, cmd_frame->wow_flags);
|
|
|
|
skb_put(skb, length);
|
|
|
|
return rsi_send_internal_mgmt_frame(common, skb);
|
|
}
|
|
#endif
|
|
|
|
int rsi_send_bgscan_params(struct rsi_common *common, int enable)
|
|
{
|
|
struct rsi_bgscan_params *params = &common->bgscan;
|
|
struct cfg80211_scan_request *scan_req = common->hwscan;
|
|
struct rsi_bgscan_config *bgscan;
|
|
struct sk_buff *skb;
|
|
u16 frame_len = sizeof(*bgscan);
|
|
u8 i;
|
|
|
|
rsi_dbg(MGMT_TX_ZONE, "%s: Sending bgscan params frame\n", __func__);
|
|
|
|
skb = dev_alloc_skb(frame_len);
|
|
if (!skb)
|
|
return -ENOMEM;
|
|
memset(skb->data, 0, frame_len);
|
|
|
|
bgscan = (struct rsi_bgscan_config *)skb->data;
|
|
rsi_set_len_qno(&bgscan->desc_dword0.len_qno,
|
|
(frame_len - FRAME_DESC_SZ), RSI_WIFI_MGMT_Q);
|
|
bgscan->desc_dword0.frame_type = BG_SCAN_PARAMS;
|
|
bgscan->bgscan_threshold = cpu_to_le16(params->bgscan_threshold);
|
|
bgscan->roam_threshold = cpu_to_le16(params->roam_threshold);
|
|
if (enable)
|
|
bgscan->bgscan_periodicity =
|
|
cpu_to_le16(params->bgscan_periodicity);
|
|
bgscan->active_scan_duration =
|
|
cpu_to_le16(params->active_scan_duration);
|
|
bgscan->passive_scan_duration =
|
|
cpu_to_le16(params->passive_scan_duration);
|
|
bgscan->two_probe = params->two_probe;
|
|
|
|
bgscan->num_bgscan_channels = scan_req->n_channels;
|
|
for (i = 0; i < bgscan->num_bgscan_channels; i++)
|
|
bgscan->channels2scan[i] =
|
|
cpu_to_le16(scan_req->channels[i]->hw_value);
|
|
|
|
skb_put(skb, frame_len);
|
|
|
|
return rsi_send_internal_mgmt_frame(common, skb);
|
|
}
|
|
|
|
/* This function sends the probe request to be used by firmware in
|
|
* background scan
|
|
*/
|
|
int rsi_send_bgscan_probe_req(struct rsi_common *common,
|
|
struct ieee80211_vif *vif)
|
|
{
|
|
struct cfg80211_scan_request *scan_req = common->hwscan;
|
|
struct rsi_bgscan_probe *bgscan;
|
|
struct sk_buff *skb;
|
|
struct sk_buff *probereq_skb;
|
|
u16 frame_len = sizeof(*bgscan);
|
|
size_t ssid_len = 0;
|
|
u8 *ssid = NULL;
|
|
|
|
rsi_dbg(MGMT_TX_ZONE,
|
|
"%s: Sending bgscan probe req frame\n", __func__);
|
|
|
|
if (common->priv->sc_nvifs <= 0)
|
|
return -ENODEV;
|
|
|
|
if (scan_req->n_ssids) {
|
|
ssid = scan_req->ssids[0].ssid;
|
|
ssid_len = scan_req->ssids[0].ssid_len;
|
|
}
|
|
|
|
skb = dev_alloc_skb(frame_len + MAX_BGSCAN_PROBE_REQ_LEN);
|
|
if (!skb)
|
|
return -ENOMEM;
|
|
memset(skb->data, 0, frame_len + MAX_BGSCAN_PROBE_REQ_LEN);
|
|
|
|
bgscan = (struct rsi_bgscan_probe *)skb->data;
|
|
bgscan->desc_dword0.frame_type = BG_SCAN_PROBE_REQ;
|
|
bgscan->flags = cpu_to_le16(HOST_BG_SCAN_TRIG);
|
|
if (common->band == NL80211_BAND_5GHZ) {
|
|
bgscan->mgmt_rate = cpu_to_le16(RSI_RATE_6);
|
|
bgscan->def_chan = cpu_to_le16(40);
|
|
} else {
|
|
bgscan->mgmt_rate = cpu_to_le16(RSI_RATE_1);
|
|
bgscan->def_chan = cpu_to_le16(11);
|
|
}
|
|
bgscan->channel_scan_time = cpu_to_le16(RSI_CHANNEL_SCAN_TIME);
|
|
|
|
probereq_skb = ieee80211_probereq_get(common->priv->hw, vif->addr, ssid,
|
|
ssid_len, scan_req->ie_len);
|
|
if (!probereq_skb) {
|
|
dev_kfree_skb(skb);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memcpy(&skb->data[frame_len], probereq_skb->data, probereq_skb->len);
|
|
|
|
bgscan->probe_req_length = cpu_to_le16(probereq_skb->len);
|
|
|
|
rsi_set_len_qno(&bgscan->desc_dword0.len_qno,
|
|
(frame_len - FRAME_DESC_SZ + probereq_skb->len),
|
|
RSI_WIFI_MGMT_Q);
|
|
|
|
skb_put(skb, frame_len + probereq_skb->len);
|
|
|
|
dev_kfree_skb(probereq_skb);
|
|
|
|
return rsi_send_internal_mgmt_frame(common, skb);
|
|
}
|
|
|
|
/**
|
|
* rsi_handle_ta_confirm_type() - This function handles the confirm frames.
|
|
* @common: Pointer to the driver private structure.
|
|
* @msg: Pointer to received packet.
|
|
*
|
|
* Return: 0 on success, -1 on failure.
|
|
*/
|
|
static int rsi_handle_ta_confirm_type(struct rsi_common *common,
|
|
u8 *msg)
|
|
{
|
|
struct rsi_hw *adapter = common->priv;
|
|
u8 sub_type = (msg[15] & 0xff);
|
|
u16 msg_len = ((u16 *)msg)[0] & 0xfff;
|
|
u8 offset;
|
|
|
|
switch (sub_type) {
|
|
case BOOTUP_PARAMS_REQUEST:
|
|
rsi_dbg(FSM_ZONE, "%s: Boot up params confirm received\n",
|
|
__func__);
|
|
if (common->fsm_state == FSM_BOOT_PARAMS_SENT) {
|
|
if (adapter->device_model == RSI_DEV_9116) {
|
|
common->band = NL80211_BAND_5GHZ;
|
|
common->num_supp_bands = 2;
|
|
|
|
if (rsi_send_reset_mac(common))
|
|
goto out;
|
|
else
|
|
common->fsm_state = FSM_RESET_MAC_SENT;
|
|
} else {
|
|
adapter->eeprom.length =
|
|
(IEEE80211_ADDR_LEN +
|
|
WLAN_MAC_MAGIC_WORD_LEN +
|
|
WLAN_HOST_MODE_LEN);
|
|
adapter->eeprom.offset = WLAN_MAC_EEPROM_ADDR;
|
|
if (rsi_eeprom_read(common)) {
|
|
common->fsm_state = FSM_CARD_NOT_READY;
|
|
goto out;
|
|
}
|
|
common->fsm_state = FSM_EEPROM_READ_MAC_ADDR;
|
|
}
|
|
} else {
|
|
rsi_dbg(INFO_ZONE,
|
|
"%s: Received bootup params cfm in %d state\n",
|
|
__func__, common->fsm_state);
|
|
return 0;
|
|
}
|
|
break;
|
|
|
|
case EEPROM_READ:
|
|
rsi_dbg(FSM_ZONE, "EEPROM READ confirm received\n");
|
|
if (msg_len <= 0) {
|
|
rsi_dbg(FSM_ZONE,
|
|
"%s: [EEPROM_READ] Invalid len %d\n",
|
|
__func__, msg_len);
|
|
goto out;
|
|
}
|
|
if (msg[16] != MAGIC_WORD) {
|
|
rsi_dbg(FSM_ZONE,
|
|
"%s: [EEPROM_READ] Invalid token\n", __func__);
|
|
common->fsm_state = FSM_CARD_NOT_READY;
|
|
goto out;
|
|
}
|
|
if (common->fsm_state == FSM_EEPROM_READ_MAC_ADDR) {
|
|
offset = (FRAME_DESC_SZ + WLAN_HOST_MODE_LEN +
|
|
WLAN_MAC_MAGIC_WORD_LEN);
|
|
memcpy(common->mac_addr, &msg[offset], ETH_ALEN);
|
|
adapter->eeprom.length =
|
|
((WLAN_MAC_MAGIC_WORD_LEN + 3) & (~3));
|
|
adapter->eeprom.offset = WLAN_EEPROM_RFTYPE_ADDR;
|
|
if (rsi_eeprom_read(common)) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Failed reading RF band\n",
|
|
__func__);
|
|
common->fsm_state = FSM_CARD_NOT_READY;
|
|
goto out;
|
|
}
|
|
common->fsm_state = FSM_EEPROM_READ_RF_TYPE;
|
|
} else if (common->fsm_state == FSM_EEPROM_READ_RF_TYPE) {
|
|
if ((msg[17] & 0x3) == 0x3) {
|
|
rsi_dbg(INIT_ZONE, "Dual band supported\n");
|
|
common->band = NL80211_BAND_5GHZ;
|
|
common->num_supp_bands = 2;
|
|
} else if ((msg[17] & 0x3) == 0x1) {
|
|
rsi_dbg(INIT_ZONE,
|
|
"Only 2.4Ghz band supported\n");
|
|
common->band = NL80211_BAND_2GHZ;
|
|
common->num_supp_bands = 1;
|
|
}
|
|
if (rsi_send_reset_mac(common))
|
|
goto out;
|
|
common->fsm_state = FSM_RESET_MAC_SENT;
|
|
} else {
|
|
rsi_dbg(ERR_ZONE, "%s: Invalid EEPROM read type\n",
|
|
__func__);
|
|
return 0;
|
|
}
|
|
break;
|
|
|
|
case RESET_MAC_REQ:
|
|
if (common->fsm_state == FSM_RESET_MAC_SENT) {
|
|
rsi_dbg(FSM_ZONE, "%s: Reset MAC cfm received\n",
|
|
__func__);
|
|
|
|
if (rsi_load_radio_caps(common))
|
|
goto out;
|
|
else
|
|
common->fsm_state = FSM_RADIO_CAPS_SENT;
|
|
} else {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Received reset mac cfm in %d state\n",
|
|
__func__, common->fsm_state);
|
|
return 0;
|
|
}
|
|
break;
|
|
|
|
case RADIO_CAPABILITIES:
|
|
if (common->fsm_state == FSM_RADIO_CAPS_SENT) {
|
|
common->rf_reset = 1;
|
|
if (adapter->device_model == RSI_DEV_9116 &&
|
|
rsi_send_w9116_features(common)) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"Failed to send 9116 features\n");
|
|
goto out;
|
|
}
|
|
if (rsi_program_bb_rf(common)) {
|
|
goto out;
|
|
} else {
|
|
common->fsm_state = FSM_BB_RF_PROG_SENT;
|
|
rsi_dbg(FSM_ZONE, "%s: Radio cap cfm received\n",
|
|
__func__);
|
|
}
|
|
} else {
|
|
rsi_dbg(INFO_ZONE,
|
|
"%s: Received radio caps cfm in %d state\n",
|
|
__func__, common->fsm_state);
|
|
return 0;
|
|
}
|
|
break;
|
|
|
|
case BB_PROG_VALUES_REQUEST:
|
|
case RF_PROG_VALUES_REQUEST:
|
|
case BBP_PROG_IN_TA:
|
|
rsi_dbg(FSM_ZONE, "%s: BB/RF cfm received\n", __func__);
|
|
if (common->fsm_state == FSM_BB_RF_PROG_SENT) {
|
|
common->bb_rf_prog_count--;
|
|
if (!common->bb_rf_prog_count) {
|
|
common->fsm_state = FSM_MAC_INIT_DONE;
|
|
if (common->reinit_hw) {
|
|
complete(&common->wlan_init_completion);
|
|
} else {
|
|
if (common->bt_defer_attach)
|
|
rsi_attach_bt(common);
|
|
|
|
return rsi_mac80211_attach(common);
|
|
}
|
|
}
|
|
} else {
|
|
rsi_dbg(INFO_ZONE,
|
|
"%s: Received bbb_rf cfm in %d state\n",
|
|
__func__, common->fsm_state);
|
|
return 0;
|
|
}
|
|
break;
|
|
|
|
case SCAN_REQUEST:
|
|
rsi_dbg(INFO_ZONE, "Set channel confirm\n");
|
|
break;
|
|
|
|
case WAKEUP_SLEEP_REQUEST:
|
|
rsi_dbg(INFO_ZONE, "Wakeup/Sleep confirmation.\n");
|
|
return rsi_handle_ps_confirm(adapter, msg);
|
|
|
|
case BG_SCAN_PROBE_REQ:
|
|
rsi_dbg(INFO_ZONE, "BG scan complete event\n");
|
|
if (common->bgscan_en) {
|
|
struct cfg80211_scan_info info;
|
|
|
|
if (!rsi_send_bgscan_params(common, RSI_STOP_BGSCAN))
|
|
common->bgscan_en = 0;
|
|
info.aborted = false;
|
|
ieee80211_scan_completed(adapter->hw, &info);
|
|
}
|
|
rsi_dbg(INFO_ZONE, "Background scan completed\n");
|
|
break;
|
|
|
|
default:
|
|
rsi_dbg(INFO_ZONE, "%s: Invalid TA confirm pkt received\n",
|
|
__func__);
|
|
break;
|
|
}
|
|
return 0;
|
|
out:
|
|
rsi_dbg(ERR_ZONE, "%s: Unable to send pkt/Invalid frame received\n",
|
|
__func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
int rsi_handle_card_ready(struct rsi_common *common, u8 *msg)
|
|
{
|
|
int status;
|
|
|
|
switch (common->fsm_state) {
|
|
case FSM_CARD_NOT_READY:
|
|
rsi_dbg(INIT_ZONE, "Card ready indication from Common HAL\n");
|
|
rsi_set_default_parameters(common);
|
|
if (rsi_send_common_dev_params(common) < 0)
|
|
return -EINVAL;
|
|
common->fsm_state = FSM_COMMON_DEV_PARAMS_SENT;
|
|
break;
|
|
case FSM_COMMON_DEV_PARAMS_SENT:
|
|
rsi_dbg(INIT_ZONE, "Card ready indication from WLAN HAL\n");
|
|
|
|
if (common->priv->device_model == RSI_DEV_9116) {
|
|
if (msg[16] != MAGIC_WORD) {
|
|
rsi_dbg(FSM_ZONE,
|
|
"%s: [EEPROM_READ] Invalid token\n",
|
|
__func__);
|
|
common->fsm_state = FSM_CARD_NOT_READY;
|
|
return -EINVAL;
|
|
}
|
|
memcpy(common->mac_addr, &msg[20], ETH_ALEN);
|
|
rsi_dbg(INIT_ZONE, "MAC Addr %pM", common->mac_addr);
|
|
}
|
|
/* Get usb buffer status register address */
|
|
common->priv->usb_buffer_status_reg = *(u32 *)&msg[8];
|
|
rsi_dbg(INFO_ZONE, "USB buffer status register = %x\n",
|
|
common->priv->usb_buffer_status_reg);
|
|
|
|
if (common->priv->device_model == RSI_DEV_9116)
|
|
status = rsi_load_9116_bootup_params(common);
|
|
else
|
|
status = rsi_load_bootup_params(common);
|
|
if (status < 0) {
|
|
common->fsm_state = FSM_CARD_NOT_READY;
|
|
return status;
|
|
}
|
|
common->fsm_state = FSM_BOOT_PARAMS_SENT;
|
|
break;
|
|
default:
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: card ready indication in invalid state %d.\n",
|
|
__func__, common->fsm_state);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* rsi_mgmt_pkt_recv() - This function processes the management packets
|
|
* received from the hardware.
|
|
* @common: Pointer to the driver private structure.
|
|
* @msg: Pointer to the received packet.
|
|
*
|
|
* Return: 0 on success, -1 on failure.
|
|
*/
|
|
int rsi_mgmt_pkt_recv(struct rsi_common *common, u8 *msg)
|
|
{
|
|
s32 msg_len = (le16_to_cpu(*(__le16 *)&msg[0]) & 0x0fff);
|
|
u16 msg_type = (msg[2]);
|
|
|
|
rsi_dbg(FSM_ZONE, "%s: Msg Len: %d, Msg Type: %4x\n",
|
|
__func__, msg_len, msg_type);
|
|
|
|
switch (msg_type) {
|
|
case TA_CONFIRM_TYPE:
|
|
return rsi_handle_ta_confirm_type(common, msg);
|
|
case CARD_READY_IND:
|
|
common->hibernate_resume = false;
|
|
rsi_dbg(FSM_ZONE, "%s: Card ready indication received\n",
|
|
__func__);
|
|
return rsi_handle_card_ready(common, msg);
|
|
case TX_STATUS_IND:
|
|
switch (msg[RSI_TX_STATUS_TYPE]) {
|
|
case PROBEREQ_CONFIRM:
|
|
common->mgmt_q_block = false;
|
|
rsi_dbg(FSM_ZONE, "%s: Probe confirm received\n",
|
|
__func__);
|
|
break;
|
|
case EAPOL4_CONFIRM:
|
|
if (msg[RSI_TX_STATUS]) {
|
|
common->eapol4_confirm = true;
|
|
if (!rsi_send_block_unblock_frame(common,
|
|
false))
|
|
common->hw_data_qs_blocked = false;
|
|
}
|
|
}
|
|
break;
|
|
case BEACON_EVENT_IND:
|
|
rsi_dbg(INFO_ZONE, "Beacon event\n");
|
|
if (common->fsm_state != FSM_MAC_INIT_DONE)
|
|
return -1;
|
|
if (common->iface_down)
|
|
return -1;
|
|
if (!common->beacon_enabled)
|
|
return -1;
|
|
rsi_send_beacon(common);
|
|
break;
|
|
case WOWLAN_WAKEUP_REASON:
|
|
rsi_dbg(ERR_ZONE, "\n\nWakeup Type: %x\n", msg[15]);
|
|
switch (msg[15]) {
|
|
case RSI_UNICAST_MAGIC_PKT:
|
|
rsi_dbg(ERR_ZONE,
|
|
"*** Wakeup for Unicast magic packet ***\n");
|
|
break;
|
|
case RSI_BROADCAST_MAGICPKT:
|
|
rsi_dbg(ERR_ZONE,
|
|
"*** Wakeup for Broadcast magic packet ***\n");
|
|
break;
|
|
case RSI_EAPOL_PKT:
|
|
rsi_dbg(ERR_ZONE,
|
|
"*** Wakeup for GTK renewal ***\n");
|
|
break;
|
|
case RSI_DISCONNECT_PKT:
|
|
rsi_dbg(ERR_ZONE,
|
|
"*** Wakeup for Disconnect ***\n");
|
|
break;
|
|
case RSI_HW_BMISS_PKT:
|
|
rsi_dbg(ERR_ZONE,
|
|
"*** Wakeup for HW Beacon miss ***\n");
|
|
break;
|
|
default:
|
|
rsi_dbg(ERR_ZONE,
|
|
"##### Un-intentional Wakeup #####\n");
|
|
break;
|
|
}
|
|
break;
|
|
case RX_DOT11_MGMT:
|
|
return rsi_mgmt_pkt_to_core(common, msg, msg_len);
|
|
default:
|
|
rsi_dbg(INFO_ZONE, "Received packet type: 0x%x\n", msg_type);
|
|
}
|
|
return 0;
|
|
}
|