linux/include/dt-bindings/pinctrl
Tony Lindgren ac7452cee7 ARM: dts: Add minimal support for dm8168-evm
This allows booting the device with basic functionality.

Note that at least on my revision c board the DDR3 does
not seem to work properly and only some of the memory
can be reliably used.

Also, the mainline u-boot does not seem to properly
initialize the ethernet, so I've been using the old TI
u-boot at:

http://arago-project.org/git/projects/?p=u-boot-omap3.git;a=summary

Cc: Brian Hutchinson <b.hutchman@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-19 11:47:35 -08:00
..
am33xx.h pinctrl: am33xx dt binding: correct include path 2013-07-21 19:37:46 +02:00
am43xx.h pinctrl: am43xx: dt-bindings: add MUX_MODE8 2014-03-02 18:37:04 +01:00
at91.h pinctrl: at91: add drive strength configuration 2014-09-05 10:32:06 +02:00
dra.h pinctrl: dra: dt-bindings: Fix output pull up/down 2014-11-10 14:29:20 -08:00
nomadik.h ARM: u8540: Add Pinctrl Device Tree settings for uart0, uart2 2013-08-06 23:48:50 +02:00
omap.h ARM: dts: Add minimal support for dm8168-evm 2015-01-19 11:47:35 -08:00
pinctrl-tegra-xusb.h of: Add NVIDIA Tegra XUSB pad controller binding 2014-07-11 14:40:41 +02:00
pinctrl-tegra.h ARM: tegra: Add header file for pinctrl constants 2013-12-16 14:09:20 -07:00
qcom,pmic-gpio.h pinctrl: Device tree bindings for Qualcomm PMIC GPIO block 2014-10-29 09:28:36 +01:00
qcom,pmic-mpp.h pinctrl: Device tree bindings for Qualcomm PMIC MPP block 2014-10-29 09:28:36 +01:00
rockchip.h pinctrl: Add mux options 3 and 4 for rockchip pinctrl 2014-08-28 15:18:03 +02:00