ac7473a179
- Core:
- Provide a new mechanism to create interrupt domains. The existing
interfaces have already too many parameters and it's a pain to expand
any of this for new required functionality.
The new function takes a pointer to a data structure as argument. The
data structure combines all existing parameters and allows for easy
extension.
The first extension for this is to handle the instantiation of
generic interrupt chips at the core level and to allow drivers to
provide extra init/exit callbacks.
This is necessary to do the full interrupt chip initialization before
the new domain is published, so that concurrent usage sites won't see
a half initialized interrupt domain. Similar problems exist on
teardown.
This has turned out to be a real problem due to the deferred and
parallel probing which was added in recent years.
Handling this at the core level allows to remove quite some accrued
boilerplate code in existing drivers and avoids horrible workarounds
at the driver level.
- The usual small improvements all over the place
- Drivers
- Add support for LAN966x OIC and RZ/Five SoC
- Split the STM ExtI driver into a microcontroller and a SMP version to
allow building the latter as a module for multi-platform kernels.
- Enable MSI support for Armada 370XP on platforms which do not support
IPIs.
- The usual small fixes and enhancements all over the place.
-----BEGIN PGP SIGNATURE-----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=QCRH
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2024-07-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
"Core:
- Provide a new mechanism to create interrupt domains. The existing
interfaces have already too many parameters and it's a pain to
expand any of this for new required functionality.
The new function takes a pointer to a data structure as argument.
The data structure combines all existing parameters and allows for
easy extension.
The first extension for this is to handle the instantiation of
generic interrupt chips at the core level and to allow drivers to
provide extra init/exit callbacks.
This is necessary to do the full interrupt chip initialization
before the new domain is published, so that concurrent usage sites
won't see a half initialized interrupt domain. Similar problems
exist on teardown.
This has turned out to be a real problem due to the deferred and
parallel probing which was added in recent years.
Handling this at the core level allows to remove quite some accrued
boilerplate code in existing drivers and avoids horrible
workarounds at the driver level.
- The usual small improvements all over the place
Drivers:
- Add support for LAN966x OIC and RZ/Five SoC
- Split the STM ExtI driver into a microcontroller and a SMP version
to allow building the latter as a module for multi-platform
kernels
- Enable MSI support for Armada 370XP on platforms which do not
support IPIs
- The usual small fixes and enhancements all over the place"
* tag 'irq-core-2024-07-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits)
irqdomain: Fix the kernel-doc and plug it into Documentation
genirq: Set IRQF_COND_ONESHOT in request_irq()
irqchip/imx-irqsteer: Handle runtime power management correctly
irqchip/gic-v3: Pass #redistributor-regions to gic_of_setup_kvm_info()
irqchip/bcm2835: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
irqchip/gic-v4: Make sure a VPE is locked when VMAPP is issued
irqchip/gic-v4: Substitute vmovp_lock for a per-VM lock
irqchip/gic-v4: Always configure affinity on VPE activation
Revert "irqchip/dw-apb-ictl: Support building as module"
Revert "Loongarch: Support loongarch avec"
arm64: Kconfig: Allow build irq-stm32mp-exti driver as module
ARM: stm32: Allow build irq-stm32mp-exti driver as module
irqchip/stm32mp-exti: Allow building as module
irqchip/stm32mp-exti: Rename internal symbols
irqchip/stm32-exti: Split MCU and MPU code
arm64: Kconfig: Select STM32MP_EXTI on STM32 platforms
ARM: stm32: Use different EXTI driver on ARMv7m and ARMv7a
irqchip/stm32-exti: Add CONFIG_STM32MP_EXTI
irqchip/dw-apb-ictl: Support building as module
irqchip/riscv-aplic: Simplify the initialization code
...
|
||
|---|---|---|
| arch | ||
| block | ||
| certs | ||
| crypto | ||
| Documentation | ||
| drivers | ||
| fs | ||
| include | ||
| init | ||
| io_uring | ||
| ipc | ||
| kernel | ||
| lib | ||
| LICENSES | ||
| mm | ||
| net | ||
| rust | ||
| samples | ||
| scripts | ||
| security | ||
| sound | ||
| tools | ||
| usr | ||
| virt | ||
| .clang-format | ||
| .cocciconfig | ||
| .editorconfig | ||
| .get_maintainer.ignore | ||
| .gitattributes | ||
| .gitignore | ||
| .mailmap | ||
| .rustfmt.toml | ||
| COPYING | ||
| CREDITS | ||
| Kbuild | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
Linux kernel
============
There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.
In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``. The formatted documentation can also be read online at:
https://www.kernel.org/doc/html/latest/
There are various text files in the Documentation/ subdirectory,
several of them using the reStructuredText markup notation.
Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.