linux/drivers/power/supply/bq27xxx_battery_i2c.c
Linus Torvalds 0df241385b power supply and reset changes for the 6.5 series
* Add new Qualcomm PMI8998/PM660 SMB2 charger
 * bq256xx: support systems without thermistors
 * cros_pchg: fix peripheral device status after system resume
 * axp20x_usb_power: add support for AXP192
 * qcom-pon: add support for pm8941
 * at91-reset: prepare to expose reset reason to sysfs
 * switch all I2C drivers back to use .probe instead of .probe_new
 * convert some more DT bindings to YAML
 * misc. cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAmSjPRsACgkQ2O7X88g7
 +ppEgw//SzE/6dgc5e2OG+qtHb2vnjUrmoz9w0/sGZuTVFhnvZ4ofpEyOrRR8/kV
 rUT6dqEPh3p/tHIyiLdcAG2JyA3QZ3G8rekdIUOj++vWn4S97FQsqBxwL/46D0om
 c7S+SDrCo/XKnJvRIiC8a+0HzAsjVUdaWdvzkEovrF5MRS1HeX4GXadaW/c6pdxN
 NfOZBR2F+JXHlC/nmBtpmQCJvikooz6DPvZd6Tiv9dlywOHNO7NSlcueuuhSofYp
 /j7BAXq/V+jEynNTPnaBwnO5aA1XPMpC/nOo4HuHjJbrHoXCt5bMhabA9bIlaplN
 9bilfxmqqfaMkpWQOhF8qmz+s496WELcmGqGBZXvNBgn/85qYTPxue4JVe1D7ldh
 TjvGUBZkVUwkce052BZrPZCUTYhlrTBJ/6xpuGeUrPa3C9ib8e9Wm6C13zI2vsJV
 EeVxgt79cNkdioZ0GfibQTg+bJ7oa8BtwWEk0UaC9jfaPQGfNum05FHRik1a+A7R
 vehaoIYiCCMaXuHSZoqqjEocdnxXQCNkViMuYNqhN5Bcb0YdlMF6r0T2fa4HND0Y
 CU8uCofqTc67/RazqCsIRHNXDi6cJOYmdnSc1q7pYCO9/KmoMdP0xIFPB2Mca7uI
 2rMooSE77ssYGc1gOW9GWuMNEdvJXNufJJzr5LLdMbhIh0ecy04=
 =9vtE
 -----END PGP SIGNATURE-----

Merge tag 'for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:

 - Add new Qualcomm PMI8998/PM660 SMB2 charger

 - bq256xx: support systems without thermistors

 - cros_pchg: fix peripheral device status after system resume

 - axp20x_usb_power: add support for AXP192

 - qcom-pon: add support for pm8941

 - at91-reset: prepare to expose reset reason to sysfs

 - switch all I2C drivers back to use .probe instead of .probe_new

 - convert some more DT bindings to YAML

 - misc cleanups

* tag 'for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits)
  MAINTAINERS: add documentation file for Microchip SAMA5D2 shutdown controller
  dt-bindings: power: reset: atmel,sama5d2-shdwc: convert to yaml
  dt-bindings: power: reset: atmel,at91sam9260-shdwc: convert to yaml
  power: reset: at91-reset: change the power on reason prototype
  power: reset: qcom-pon: add support for pm8941-pon
  dt-bindings: power: reset: qcom-pon: define pm8941-pon
  power: supply: add Qualcomm PMI8998 SMB2 Charger driver
  dt-bindings: power: supply: qcom,pmi8998-charger: add bindings for smb2 driver
  power: supply: rt9467: Make charger-enable control as logic level
  power: supply: Switch i2c drivers back to use .probe()
  power: reset: add HAS_IOPORT dependencies
  dt-bindings: power: supply: axp20x: Add AXP192 compatible
  power: supply: axp20x_usb_power: Add support for AXP192
  power: supply: axp20x_usb_power: Remove variant IDs from VBUS polling check
  power: supply: axp20x_usb_power: Use regmap field for VBUS disabling
  power: supply: axp20x_usb_power: Use regmap fields for USB BC feature
  power: supply: axp20x_usb_power: Use regmap fields for VBUS monitor feature
  power: supply: axp20x_usb_power: Simplify USB current limit handling
  power: supply: hwmon: constify pointers to hwmon_channel_info
  power: supply: twl4030_madc_battery: Refactor twl4030_madc_bat_ext_changed()
  ...
2023-07-03 17:23:16 -07:00

308 lines
6.9 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* BQ27xxx battery monitor I2C driver
*
* Copyright (C) 2015 Texas Instruments Incorporated - https://www.ti.com/
* Andrew F. Davis <afd@ti.com>
*/
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <asm/unaligned.h>
#include <linux/power/bq27xxx_battery.h>
static DEFINE_IDR(battery_id);
static DEFINE_MUTEX(battery_mutex);
static irqreturn_t bq27xxx_battery_irq_handler_thread(int irq, void *data)
{
struct bq27xxx_device_info *di = data;
bq27xxx_battery_update(di);
return IRQ_HANDLED;
}
static int bq27xxx_battery_i2c_read(struct bq27xxx_device_info *di, u8 reg,
bool single)
{
struct i2c_client *client = to_i2c_client(di->dev);
struct i2c_msg msg[2];
u8 data[2];
int ret;
if (!client->adapter)
return -ENODEV;
msg[0].addr = client->addr;
msg[0].flags = 0;
msg[0].buf = &reg;
msg[0].len = sizeof(reg);
msg[1].addr = client->addr;
msg[1].flags = I2C_M_RD;
msg[1].buf = data;
if (single)
msg[1].len = 1;
else
msg[1].len = 2;
ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
if (ret < 0)
return ret;
if (!single)
ret = get_unaligned_le16(data);
else
ret = data[0];
return ret;
}
static int bq27xxx_battery_i2c_write(struct bq27xxx_device_info *di, u8 reg,
int value, bool single)
{
struct i2c_client *client = to_i2c_client(di->dev);
struct i2c_msg msg;
u8 data[4];
int ret;
if (!client->adapter)
return -ENODEV;
data[0] = reg;
if (single) {
data[1] = (u8) value;
msg.len = 2;
} else {
put_unaligned_le16(value, &data[1]);
msg.len = 3;
}
msg.buf = data;
msg.addr = client->addr;
msg.flags = 0;
ret = i2c_transfer(client->adapter, &msg, 1);
if (ret < 0)
return ret;
if (ret != 1)
return -EINVAL;
return 0;
}
static int bq27xxx_battery_i2c_bulk_read(struct bq27xxx_device_info *di, u8 reg,
u8 *data, int len)
{
struct i2c_client *client = to_i2c_client(di->dev);
int ret;
if (!client->adapter)
return -ENODEV;
ret = i2c_smbus_read_i2c_block_data(client, reg, len, data);
if (ret < 0)
return ret;
if (ret != len)
return -EINVAL;
return 0;
}
static int bq27xxx_battery_i2c_bulk_write(struct bq27xxx_device_info *di,
u8 reg, u8 *data, int len)
{
struct i2c_client *client = to_i2c_client(di->dev);
struct i2c_msg msg;
u8 buf[33];
int ret;
if (!client->adapter)
return -ENODEV;
buf[0] = reg;
memcpy(&buf[1], data, len);
msg.buf = buf;
msg.addr = client->addr;
msg.flags = 0;
msg.len = len + 1;
ret = i2c_transfer(client->adapter, &msg, 1);
if (ret < 0)
return ret;
if (ret != 1)
return -EINVAL;
return 0;
}
static int bq27xxx_battery_i2c_probe(struct i2c_client *client)
{
const struct i2c_device_id *id = i2c_client_get_device_id(client);
struct bq27xxx_device_info *di;
int ret;
char *name;
int num;
/* Get new ID for the new battery device */
mutex_lock(&battery_mutex);
num = idr_alloc(&battery_id, client, 0, 0, GFP_KERNEL);
mutex_unlock(&battery_mutex);
if (num < 0)
return num;
name = devm_kasprintf(&client->dev, GFP_KERNEL, "%s-%d", id->name, num);
if (!name)
goto err_mem;
di = devm_kzalloc(&client->dev, sizeof(*di), GFP_KERNEL);
if (!di)
goto err_mem;
di->id = num;
di->dev = &client->dev;
di->chip = id->driver_data;
di->name = name;
di->bus.read = bq27xxx_battery_i2c_read;
di->bus.write = bq27xxx_battery_i2c_write;
di->bus.read_bulk = bq27xxx_battery_i2c_bulk_read;
di->bus.write_bulk = bq27xxx_battery_i2c_bulk_write;
ret = bq27xxx_battery_setup(di);
if (ret)
goto err_failed;
/* Schedule a polling after about 1 min */
schedule_delayed_work(&di->work, 60 * HZ);
i2c_set_clientdata(client, di);
if (client->irq) {
ret = request_threaded_irq(client->irq,
NULL, bq27xxx_battery_irq_handler_thread,
IRQF_ONESHOT,
di->name, di);
if (ret) {
dev_err(&client->dev,
"Unable to register IRQ %d error %d\n",
client->irq, ret);
bq27xxx_battery_teardown(di);
goto err_failed;
}
}
return 0;
err_mem:
ret = -ENOMEM;
err_failed:
mutex_lock(&battery_mutex);
idr_remove(&battery_id, num);
mutex_unlock(&battery_mutex);
return ret;
}
static void bq27xxx_battery_i2c_remove(struct i2c_client *client)
{
struct bq27xxx_device_info *di = i2c_get_clientdata(client);
free_irq(client->irq, di);
bq27xxx_battery_teardown(di);
mutex_lock(&battery_mutex);
idr_remove(&battery_id, di->id);
mutex_unlock(&battery_mutex);
}
static const struct i2c_device_id bq27xxx_i2c_id_table[] = {
{ "bq27200", BQ27000 },
{ "bq27210", BQ27010 },
{ "bq27500", BQ2750X },
{ "bq27510", BQ2751X },
{ "bq27520", BQ2752X },
{ "bq27500-1", BQ27500 },
{ "bq27510g1", BQ27510G1 },
{ "bq27510g2", BQ27510G2 },
{ "bq27510g3", BQ27510G3 },
{ "bq27520g1", BQ27520G1 },
{ "bq27520g2", BQ27520G2 },
{ "bq27520g3", BQ27520G3 },
{ "bq27520g4", BQ27520G4 },
{ "bq27521", BQ27521 },
{ "bq27530", BQ27530 },
{ "bq27531", BQ27531 },
{ "bq27541", BQ27541 },
{ "bq27542", BQ27542 },
{ "bq27546", BQ27546 },
{ "bq27742", BQ27742 },
{ "bq27545", BQ27545 },
{ "bq27411", BQ27411 },
{ "bq27421", BQ27421 },
{ "bq27425", BQ27425 },
{ "bq27426", BQ27426 },
{ "bq27441", BQ27441 },
{ "bq27621", BQ27621 },
{ "bq27z561", BQ27Z561 },
{ "bq28z610", BQ28Z610 },
{ "bq34z100", BQ34Z100 },
{ "bq78z100", BQ78Z100 },
{},
};
MODULE_DEVICE_TABLE(i2c, bq27xxx_i2c_id_table);
#ifdef CONFIG_OF
static const struct of_device_id bq27xxx_battery_i2c_of_match_table[] = {
{ .compatible = "ti,bq27200" },
{ .compatible = "ti,bq27210" },
{ .compatible = "ti,bq27500" },
{ .compatible = "ti,bq27510" },
{ .compatible = "ti,bq27520" },
{ .compatible = "ti,bq27500-1" },
{ .compatible = "ti,bq27510g1" },
{ .compatible = "ti,bq27510g2" },
{ .compatible = "ti,bq27510g3" },
{ .compatible = "ti,bq27520g1" },
{ .compatible = "ti,bq27520g2" },
{ .compatible = "ti,bq27520g3" },
{ .compatible = "ti,bq27520g4" },
{ .compatible = "ti,bq27521" },
{ .compatible = "ti,bq27530" },
{ .compatible = "ti,bq27531" },
{ .compatible = "ti,bq27541" },
{ .compatible = "ti,bq27542" },
{ .compatible = "ti,bq27546" },
{ .compatible = "ti,bq27742" },
{ .compatible = "ti,bq27545" },
{ .compatible = "ti,bq27411" },
{ .compatible = "ti,bq27421" },
{ .compatible = "ti,bq27425" },
{ .compatible = "ti,bq27426" },
{ .compatible = "ti,bq27441" },
{ .compatible = "ti,bq27621" },
{ .compatible = "ti,bq27z561" },
{ .compatible = "ti,bq28z610" },
{ .compatible = "ti,bq34z100" },
{ .compatible = "ti,bq78z100" },
{},
};
MODULE_DEVICE_TABLE(of, bq27xxx_battery_i2c_of_match_table);
#endif
static struct i2c_driver bq27xxx_battery_i2c_driver = {
.driver = {
.name = "bq27xxx-battery",
.of_match_table = of_match_ptr(bq27xxx_battery_i2c_of_match_table),
},
.probe = bq27xxx_battery_i2c_probe,
.remove = bq27xxx_battery_i2c_remove,
.id_table = bq27xxx_i2c_id_table,
};
module_i2c_driver(bq27xxx_battery_i2c_driver);
MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
MODULE_DESCRIPTION("BQ27xxx battery monitor i2c driver");
MODULE_LICENSE("GPL");