e3084ed48f
Core changes:
- New standard enumerator and corresponding device tree bindings
for output impedance pin configuration. (Implemented and used
in the Renesas rzg2l driver.)
- Cleanup of Kconfig and Makefile to be somewhat orderly and
alphabetic.
New drivers:
- Samsung Exynos 7885 pin controller.
- Ocelot LAN966x pin controller.
- Qualcomm SDX65 pin controller.
- Qualcomm SM8450 pin controller.
- Qualcomm PM8019, PM8226 and PM2250 pin controllers.
- NXP/Freescale i.MXRT1050 pin controller.
- Intel Thunder Bay pin controller.
Enhancements:
- Introduction of the string library helper function
"kasprintf_strarray()" and subsequent use in Rockchip, ST and
Armada pin control drivers, as well as the GPIO mockup driver.
- The Ocelot pin controller has been extensively rewritten to
use regmap and other modern kernel infrastructure.
- The Microchip SGPIO driver has been converted to use regmap.
- The SPEAr driver had been converted to use regmap.
- Substantial cleanups and janitorial on the Apple pin control
driver that was merged for v5.16.
- Janitorial to remove of_node assignments in the GPIO portions
that anyway get this handled in the GPIO core.
- Minor cleanups and improvements in several pin controllers.
-----BEGIN PGP SIGNATURE-----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=+nxh
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control bulk updates from Linus Walleij:
"Core changes:
- New standard enumerator and corresponding device tree bindings for
output impedance pin configuration. (Implemented and used in the
Renesas rzg2l driver.)
- Cleanup of Kconfig and Makefile to be somewhat orderly and
alphabetic.
New drivers:
- Samsung Exynos 7885 pin controller.
- Ocelot LAN966x pin controller.
- Qualcomm SDX65 pin controller.
- Qualcomm SM8450 pin controller.
- Qualcomm PM8019, PM8226 and PM2250 pin controllers.
- NXP/Freescale i.MXRT1050 pin controller.
- Intel Thunder Bay pin controller.
Enhancements:
- Introduction of the string library helper function
"kasprintf_strarray()" and subsequent use in Rockchip, ST and
Armada pin control drivers, as well as the GPIO mockup driver.
- The Ocelot pin controller has been extensively rewritten to use
regmap and other modern kernel infrastructure.
- The Microchip SGPIO driver has been converted to use regmap.
- The SPEAr driver had been converted to use regmap.
- Substantial cleanups and janitorial on the Apple pin control driver
that was merged for v5.16.
- Janitorial to remove of_node assignments in the GPIO portions that
anyway get this handled in the GPIO core.
- Minor cleanups and improvements in several pin controllers"
* tag 'pinctrl-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (98 commits)
pinctrl: imx: fix assigning groups names
dt-bindings: pinctrl: mt8195: add wrapping node of pin configurations
pinctrl: bcm: ns: use generic groups & functions helpers
pinctrl: imx: fix allocation result check
pinctrl: samsung: Use platform_get_irq_optional() to get the interrupt
pinctrl: Propagate firmware node from a parent device
dt-bindings: pinctrl: qcom: Add SDX65 pinctrl bindings
pinctrl: add one more "const" for generic function groups
pinctrl: keembay: rework loops looking for groups names
pinctrl: keembay: comment process of building functions a bit
pinctrl: imx: prepare for making "group_names" in "function_desc" const
ARM: dts: gpio-ranges property is now required
pinctrl: aspeed: fix unmet dependencies on MFD_SYSCON for PINCTRL_ASPEED
pinctrl: Get rid of duplicate of_node assignment in the drivers
pinctrl-sunxi: don't call pinctrl_gpio_direction()
pinctrl-bcm2835: don't call pinctrl_gpio_direction()
pinctrl: bcm2835: Silence uninit warning
pinctrl: Sort Kconfig and Makefile entries alphabetically
pinctrl: Add Intel Thunder Bay pinctrl driver
dt-bindings: pinctrl: Add bindings for Intel Thunderbay pinctrl driver
...
80 lines
3.1 KiB
Makefile
80 lines
3.1 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0
|
|
# generic pinmux support
|
|
|
|
subdir-ccflags-$(CONFIG_DEBUG_PINCTRL) += -DDEBUG
|
|
|
|
obj-y += core.o pinctrl-utils.o
|
|
obj-$(CONFIG_PINMUX) += pinmux.o
|
|
obj-$(CONFIG_PINCONF) += pinconf.o
|
|
obj-$(CONFIG_GENERIC_PINCONF) += pinconf-generic.o
|
|
obj-$(CONFIG_OF) += devicetree.o
|
|
|
|
obj-$(CONFIG_PINCTRL_AMD) += pinctrl-amd.o
|
|
obj-$(CONFIG_PINCTRL_APPLE_GPIO) += pinctrl-apple-gpio.o
|
|
obj-$(CONFIG_PINCTRL_ARTPEC6) += pinctrl-artpec6.o
|
|
obj-$(CONFIG_PINCTRL_AS3722) += pinctrl-as3722.o
|
|
obj-$(CONFIG_PINCTRL_AT91) += pinctrl-at91.o
|
|
obj-$(CONFIG_PINCTRL_AT91PIO4) += pinctrl-at91-pio4.o
|
|
obj-$(CONFIG_PINCTRL_AXP209) += pinctrl-axp209.o
|
|
obj-$(CONFIG_PINCTRL_BM1880) += pinctrl-bm1880.o
|
|
obj-$(CONFIG_PINCTRL_DA850_PUPD) += pinctrl-da850-pupd.o
|
|
obj-$(CONFIG_PINCTRL_DA9062) += pinctrl-da9062.o
|
|
obj-$(CONFIG_PINCTRL_DIGICOLOR) += pinctrl-digicolor.o
|
|
obj-$(CONFIG_PINCTRL_EQUILIBRIUM) += pinctrl-equilibrium.o
|
|
obj-$(CONFIG_PINCTRL_GEMINI) += pinctrl-gemini.o
|
|
obj-$(CONFIG_PINCTRL_INGENIC) += pinctrl-ingenic.o
|
|
obj-$(CONFIG_PINCTRL_K210) += pinctrl-k210.o
|
|
obj-$(CONFIG_PINCTRL_KEEMBAY) += pinctrl-keembay.o
|
|
obj-$(CONFIG_PINCTRL_LANTIQ) += pinctrl-lantiq.o
|
|
obj-$(CONFIG_PINCTRL_FALCON) += pinctrl-falcon.o
|
|
obj-$(CONFIG_PINCTRL_XWAY) += pinctrl-xway.o
|
|
obj-$(CONFIG_PINCTRL_LPC18XX) += pinctrl-lpc18xx.o
|
|
obj-$(CONFIG_PINCTRL_MAX77620) += pinctrl-max77620.o
|
|
obj-$(CONFIG_PINCTRL_MCP23S08_I2C) += pinctrl-mcp23s08_i2c.o
|
|
obj-$(CONFIG_PINCTRL_MCP23S08_SPI) += pinctrl-mcp23s08_spi.o
|
|
obj-$(CONFIG_PINCTRL_MCP23S08) += pinctrl-mcp23s08.o
|
|
obj-$(CONFIG_PINCTRL_MICROCHIP_SGPIO) += pinctrl-microchip-sgpio.o
|
|
obj-$(CONFIG_PINCTRL_OCELOT) += pinctrl-ocelot.o
|
|
obj-$(CONFIG_PINCTRL_OXNAS) += pinctrl-oxnas.o
|
|
obj-$(CONFIG_PINCTRL_PALMAS) += pinctrl-palmas.o
|
|
obj-$(CONFIG_PINCTRL_PIC32) += pinctrl-pic32.o
|
|
obj-$(CONFIG_PINCTRL_PISTACHIO) += pinctrl-pistachio.o
|
|
obj-$(CONFIG_PINCTRL_RK805) += pinctrl-rk805.o
|
|
obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o
|
|
obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o
|
|
obj-$(CONFIG_PINCTRL_STARFIVE) += pinctrl-starfive.o
|
|
obj-$(CONFIG_PINCTRL_STMFX) += pinctrl-stmfx.o
|
|
obj-$(CONFIG_PINCTRL_ST) += pinctrl-st.o
|
|
obj-$(CONFIG_PINCTRL_SX150X) += pinctrl-sx150x.o
|
|
obj-$(CONFIG_PINCTRL_TB10X) += pinctrl-tb10x.o
|
|
obj-$(CONFIG_PINCTRL_THUNDERBAY) += pinctrl-thunderbay.o
|
|
obj-$(CONFIG_PINCTRL_ZYNQMP) += pinctrl-zynqmp.o
|
|
obj-$(CONFIG_PINCTRL_ZYNQ) += pinctrl-zynq.o
|
|
|
|
obj-y += actions/
|
|
obj-$(CONFIG_ARCH_ASPEED) += aspeed/
|
|
obj-y += bcm/
|
|
obj-$(CONFIG_PINCTRL_BERLIN) += berlin/
|
|
obj-y += cirrus/
|
|
obj-y += freescale/
|
|
obj-$(CONFIG_X86) += intel/
|
|
obj-y += mediatek/
|
|
obj-$(CONFIG_PINCTRL_MESON) += meson/
|
|
obj-y += mvebu/
|
|
obj-y += nomadik/
|
|
obj-$(CONFIG_ARCH_NPCM7XX) += nuvoton/
|
|
obj-$(CONFIG_PINCTRL_PXA) += pxa/
|
|
obj-$(CONFIG_ARCH_QCOM) += qcom/
|
|
obj-$(CONFIG_PINCTRL_RALINK) += ralink/
|
|
obj-$(CONFIG_PINCTRL_RENESAS) += renesas/
|
|
obj-$(CONFIG_PINCTRL_SAMSUNG) += samsung/
|
|
obj-$(CONFIG_PINCTRL_SPEAR) += spear/
|
|
obj-y += sprd/
|
|
obj-$(CONFIG_PINCTRL_STM32) += stm32/
|
|
obj-$(CONFIG_PINCTRL_SUNXI) += sunxi/
|
|
obj-$(CONFIG_ARCH_TEGRA) += tegra/
|
|
obj-y += ti/
|
|
obj-$(CONFIG_PINCTRL_UNIPHIER) += uniphier/
|
|
obj-$(CONFIG_PINCTRL_VISCONTI) += visconti/
|
|
obj-$(CONFIG_ARCH_VT8500) += vt8500/
|