aefe054f2c
Four variants of Samsung Galaxy Core Prime and Grand Prime, built on MSM8916, and the Hardware Development Kit (HDK) for SM8550, are introduced. On X Elite audio and compute remoteprocs, IPCC, PCIe, AOSS QMP, SMP2P, TCSR, USB, display, audio, and soundwire support is introduced, and enabled across the CRD and QCP devices. For SM8650 PCIe controllers are moved to GIC-ITS and msi-map-mask is defined. Missing qlink-logging reserved-memory region is added for the modem remoteproc. FastRPC compute contexts are marked dma-coherent. Audio, USB Type-C and PM8010 support is introduced across MTP and QRD devices. GPU cooling devices are hooked up across MSM8916, MSM8939, SC8180X, SDM630, SDM845, SM6115, SM8150, SM8250, SM8350, and SM8550. UFS PHY clocks are corrected across MSM8996, MSM8998, SC8180X, SC8280XP, SDM845, SM6115, SM6125, SM8150, SM8250, SM8350, SM8550, and SM8650. PCI MSI interrupts are wired up across SM8150, SM8250, SM8350, SM8450, SM8550, SM8650, SC7280, and SC8180X On IPQ6018 QUP5 I2C, tsens sand thermal zones are defined. The Inline Crypto Engine (ICE) is enabled for IPQ9574. On MSM8953 the GPU and its IOMMU is introduced, the reset for the display subsystem is also wired up. VLS CLAMP registers are specified for USB3 PHYs on MSM8998, QCM2290, and SM6115. USB Type-C port management is enabled on QRB4210 RB2. On the SA8295P ADP the MAX20411 regulator powering the GPU rails is introduced and the GPU is enabled. The first PCI instance on SA8540P Ride is disabled for now, as a fix for the interrupt storm produced here has not been presented. On SA8775P the firmware memory map has changed and is updated. Safety IRQ is added to the Ethernet controller. On SC7180 UFS support is introduced and the cros-ec-spi is marked as wakeup source. For SC7280 capacity and DPC properties are added, cryptobam definition is improved to work in more firmware environments, more Chrome-specific properties are moved out from main dtsi, and cros-ec-spi is maked as a wakeup source. Slimbus definition is added to the platform. A missing reserved-memory range is added to Fairphone FP5, PMIC GLINK and Venus are enabled. LEDs are introduced and voltage settings corrected on the QCM6490 IDP, and RB3gen2 sees the same voltage changes and GCC protected clocks are introduced to make the board boot properly. RPMh sleep stats and a variety of cleanups and fixes are introduced for SC8180X. On SC8280XP the additional tsens instances are introduced. Camera Subsystem and Camera Control Interface (CCI) are added. PMIC die-temp vadc channels are introduced on the CRD, to allow ADC channels to be tied to the shared PMIC temp-alarms, to actually report temperature. On SDM630 USB QMP PHY support is introduced and enabled on the Inforce IFC6560 board. On the various Sony Xperia XA2 variants WLED is enabled and configured. On SM6350 display subsystem interconnects and tsens-based thermal zones are added. On SM7125 UFS support is added. On Fairphone FP4, on SM7225, display and GPU are enabled, and firmware paths are corrected. SM8150 PCIe controller definitions are corrected. As with SM8650, the SM8550 the fastrpc compute contexts are marked dm-coherent, and PCIe controllers are moved to use GIC-ITS. The UFS controller frequency definition is moved to the generic opp-table. Touchscreen is enabled on the QRD device. As usual, a variety of smaller cleanups and corrections to match DeviceTree bindings and style guidelines are introduced across the various files. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmXayZYVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FtLcQAJyCQ/wRZ2BVVr3afFqWaAIQQ4+X mTywp/1dtWDbLMew2WIcv1KLHVDynsPWYr/AWM3w0kjgbiqr+EzZl18GVAqf53QB CCkgbLClEKl8NyGQGKWRfp0PF5K/ujv50+6WxwJ+46Sm63odAHe1MZFQQsyuMACn uP7R9yiKt39ztwXp24KbbS6OKNnxtvqeI2OTYFiQV6kR/AqTONrIedqNhvMfgAw9 jOF5ZkqDTlTqJhcszOkzfBC18bnTLvhKP0TG4YhlUpDwJVIaGVp3vzIzX7PJgVIA XxbWqc6I91PIPTHCu4gCcklQXLdu3Uc1cBqufiE70+GgDo4+P4nJkSDNeSrOUuQA NXUULnFyum7U0S3yIQHD2wiUIqRwgwfLJeKe7Z8kya4cCWkcvUBWBw+e8GCADlEI R22pY4bpJwJYO66TCHT/5A05HjnSh/wY1O56fLepJ5ywGQKX7U71mZsGehSgwp4u /OuWgRqnMmcyNAZKE/NMFfGUCRLRWwzWTl4VQ1Fiq+JN3jcySFyAm+cW8NXQ3q6y oDcxx8TyWn+nBS/oErNZ9Q0I7jQun4DzUyYszeBEzffyWPie3KI6KtqlkJGSmK/y Z1kCOnlJSfDNnRYHR82fNFSuHpIpBYhdSWUduweLwiX36ZfFcZ8QA8eTsDANNgf4 TZflGJSXL8YMBucn =LM9R -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmXhqwQACgkQYKtH/8kJ Uie8thAAk7/ASn/Q8PcHAEamCk34HFADaVnUpU6OTtQwiBDr3amRx8IfrGqxbW6e BVZOFnasehDLl68433XrFTQfaRLFxRJEoY5sZ1PFOCZvqoO8IfjawokpjzKzq6PK 0HprU82+CVl9UwYjcAEWD2y/alQ4Q48YUF971q7dzBCTey8gXUZtyW2fk7ZptzR1 utq3rE3zK+WRvijTdHNsjw3qdwoM3K8QrryocKqYqzQM9RKNu2JfJgH1VL+8W70x eZvASON8wYgByaKke5WrK9k1ZGCj01Qy7bfdv/hzz+DZ+KkvvJce+/gy1zB5klzV fP6qSP5BP8zTzaQx/pqK3TDb/QMXNndwmWYufAtQ4LE0c5AwDnd9ZJN29yb4ASME cSUfc0cfrL/JrWlk17FWPo94z9InWBurZg/L8ljS3ms6MWUQcaZjIPrUYz+scAdF dVlJJrX1eJVNj95q/79DfjNeRgMOzj8E5dm/qGDEM/XxQvCLo3pEWAiauIYRkGFE NsG1uZsW833gx3M0ZEtGtP9Nl2Mai5gyZjXFa+P5Of9TQ1/FYWghyn7hmfajGqlJ gQzsBwbJSQv9H40X907NbLE9fULHHfAfTY0SFHaH1U6LmxrGfXpKm44+KKoEABAH Lkx4k8da0ALK+YsYbXtPkd95zdIUx2567GwJaAZg46QKaBAjk9o= =+uiX -----END PGP SIGNATURE----- Merge tag 'qcom-arm64-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm ARM64 DeviceTree updates for v6.9 Four variants of Samsung Galaxy Core Prime and Grand Prime, built on MSM8916, and the Hardware Development Kit (HDK) for SM8550, are introduced. On X Elite audio and compute remoteprocs, IPCC, PCIe, AOSS QMP, SMP2P, TCSR, USB, display, audio, and soundwire support is introduced, and enabled across the CRD and QCP devices. For SM8650 PCIe controllers are moved to GIC-ITS and msi-map-mask is defined. Missing qlink-logging reserved-memory region is added for the modem remoteproc. FastRPC compute contexts are marked dma-coherent. Audio, USB Type-C and PM8010 support is introduced across MTP and QRD devices. GPU cooling devices are hooked up across MSM8916, MSM8939, SC8180X, SDM630, SDM845, SM6115, SM8150, SM8250, SM8350, and SM8550. UFS PHY clocks are corrected across MSM8996, MSM8998, SC8180X, SC8280XP, SDM845, SM6115, SM6125, SM8150, SM8250, SM8350, SM8550, and SM8650. PCI MSI interrupts are wired up across SM8150, SM8250, SM8350, SM8450, SM8550, SM8650, SC7280, and SC8180X On IPQ6018 QUP5 I2C, tsens sand thermal zones are defined. The Inline Crypto Engine (ICE) is enabled for IPQ9574. On MSM8953 the GPU and its IOMMU is introduced, the reset for the display subsystem is also wired up. VLS CLAMP registers are specified for USB3 PHYs on MSM8998, QCM2290, and SM6115. USB Type-C port management is enabled on QRB4210 RB2. On the SA8295P ADP the MAX20411 regulator powering the GPU rails is introduced and the GPU is enabled. The first PCI instance on SA8540P Ride is disabled for now, as a fix for the interrupt storm produced here has not been presented. On SA8775P the firmware memory map has changed and is updated. Safety IRQ is added to the Ethernet controller. On SC7180 UFS support is introduced and the cros-ec-spi is marked as wakeup source. For SC7280 capacity and DPC properties are added, cryptobam definition is improved to work in more firmware environments, more Chrome-specific properties are moved out from main dtsi, and cros-ec-spi is maked as a wakeup source. Slimbus definition is added to the platform. A missing reserved-memory range is added to Fairphone FP5, PMIC GLINK and Venus are enabled. LEDs are introduced and voltage settings corrected on the QCM6490 IDP, and RB3gen2 sees the same voltage changes and GCC protected clocks are introduced to make the board boot properly. RPMh sleep stats and a variety of cleanups and fixes are introduced for SC8180X. On SC8280XP the additional tsens instances are introduced. Camera Subsystem and Camera Control Interface (CCI) are added. PMIC die-temp vadc channels are introduced on the CRD, to allow ADC channels to be tied to the shared PMIC temp-alarms, to actually report temperature. On SDM630 USB QMP PHY support is introduced and enabled on the Inforce IFC6560 board. On the various Sony Xperia XA2 variants WLED is enabled and configured. On SM6350 display subsystem interconnects and tsens-based thermal zones are added. On SM7125 UFS support is added. On Fairphone FP4, on SM7225, display and GPU are enabled, and firmware paths are corrected. SM8150 PCIe controller definitions are corrected. As with SM8650, the SM8550 the fastrpc compute contexts are marked dm-coherent, and PCIe controllers are moved to use GIC-ITS. The UFS controller frequency definition is moved to the generic opp-table. Touchscreen is enabled on the QRD device. As usual, a variety of smaller cleanups and corrections to match DeviceTree bindings and style guidelines are introduced across the various files. * tag 'qcom-arm64-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (176 commits) arm64: dts: qcom: sm6115: fix USB PHY configuration arm64: dts: sm8650: Add msi-map-mask for PCIe nodes arm64: dts: qcom: replace underscores in node names dt-bindings: arm: qcom: Add Samsung Galaxy Tab 4 10.1 LTE arm64: dts: qcom: pm4125: define USB-C related blocks arm64: dts: qcom: sa8540p-ride: disable pcie2a node arm64: dts: qcom: sc7280: add slimbus DT node arm64: dts: qcom: sc7280: Add capacity and DPC properties arm64: dts: qcom: pmi632: Add PBS client and use in LPG node arm64: dts: qcom: sm8550: Use GIC-ITS for PCIe0 and PCIe1 arm64: dts: qcom: sm8150: correct PCIe wake-gpios arm64: dts: qcom: sdm845-db845c: correct PCIe wake-gpios arm64: dts: qcom: sm7225-fairphone-fp4: Enable display and GPU arm64: dts: qcom: sm6350: Remove "disabled" state of GMU arm64: dts: qcom: msm8916-samsung-fortuna/rossa: Add fuel gauge arm64: dts: qcom: sm6350: Add interconnect for MDSS arm64: dts: qcom: msm8916-samsung-fortuna/rossa: Add initial device trees arm64: dts: qcom: sm8550: Switch UFS from opp-table-hz to opp-v2 arm64: dts: qcom: sc8180x: describe all PCI MSI interrupts arm64: dts: qcom: minor whitespace cleanup ... Link: https://lore.kernel.org/r/20240225050146.484422-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Linux kernel
============
There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.
In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``. The formatted documentation can also be read online at:
https://www.kernel.org/doc/html/latest/
There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.
Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.