2128f3cca5
Add documentation about AMD's Wifi band RFI mitigation (WBRF) mechanism explaining the theory and how it is used. Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
79 lines
3.0 KiB
ReStructuredText
79 lines
3.0 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
=================================
|
|
WBRF - Wifi Band RFI Mitigations
|
|
=================================
|
|
|
|
Due to electrical and mechanical constraints in certain platform designs
|
|
there may be likely interference of relatively high-powered harmonics of
|
|
the GPU memory clocks with local radio module frequency bands used by
|
|
certain Wifi bands.
|
|
|
|
To mitigate possible RFI interference producers can advertise the
|
|
frequencies in use and consumers can use this information to avoid using
|
|
these frequencies for sensitive features.
|
|
|
|
When a platform is known to have this issue with any contained devices,
|
|
the platform designer will advertise the availability of this feature via
|
|
ACPI devices with a device specific method (_DSM).
|
|
* Producers with this _DSM will be able to advertise the frequencies in use.
|
|
* Consumers with this _DSM will be able to register for notifications of
|
|
frequencies in use.
|
|
|
|
Some general terms
|
|
==================
|
|
|
|
Producer: such component who can produce high-powered radio frequency
|
|
Consumer: such component who can adjust its in-use frequency in
|
|
response to the radio frequencies of other components to mitigate the
|
|
possible RFI.
|
|
|
|
To make the mechanism function, those producers should notify active use
|
|
of their particular frequencies so that other consumers can make relative
|
|
internal adjustments as necessary to avoid this resonance.
|
|
|
|
ACPI interface
|
|
==============
|
|
|
|
Although initially used by for wifi + dGPU use cases, the ACPI interface
|
|
can be scaled to any type of device that a platform designer discovers
|
|
can cause interference.
|
|
|
|
The GUID used for the _DSM is 7B7656CF-DC3D-4C1C-83E9-66E721DE3070.
|
|
|
|
3 functions are available in this _DSM:
|
|
|
|
* 0: discover # of functions available
|
|
* 1: record RF bands in use
|
|
* 2: retrieve RF bands in use
|
|
|
|
Driver programming interface
|
|
============================
|
|
|
|
.. kernel-doc:: drivers/platform/x86/amd/wbrf.c
|
|
|
|
Sample Usage
|
|
=============
|
|
|
|
The expected flow for the producers:
|
|
1. During probe, call `acpi_amd_wbrf_supported_producer` to check if WBRF
|
|
can be enabled for the device.
|
|
2. On using some frequency band, call `acpi_amd_wbrf_add_remove` with 'add'
|
|
param to get other consumers properly notified.
|
|
3. Or on stopping using some frequency band, call
|
|
`acpi_amd_wbrf_add_remove` with 'remove' param to get other consumers notified.
|
|
|
|
The expected flow for the consumers:
|
|
1. During probe, call `acpi_amd_wbrf_supported_consumer` to check if WBRF
|
|
can be enabled for the device.
|
|
2. Call `amd_wbrf_register_notifier` to register for notification
|
|
of frequency band change(add or remove) from other producers.
|
|
3. Call the `amd_wbrf_retrieve_freq_band` initally to retrieve
|
|
current active frequency bands considering some producers may broadcast
|
|
such information before the consumer is up.
|
|
4. On receiving a notification for frequency band change, run
|
|
`amd_wbrf_retrieve_freq_band` again to retrieve the latest
|
|
active frequency bands.
|
|
5. During driver cleanup, call `amd_wbrf_unregister_notifier` to
|
|
unregister the notifier.
|