Martyn Welch b16918a5fd hwmon: (da9052) Increase sample rate when using TSI
The TSI channel, which is usually used for touchscreen support, but can
be used as 4 general purpose ADCs. When used as a touchscreen interface
the touchscreen driver switches the device into 1ms sampling mode (rather
than the default 10ms economy mode) as recommended by the manufacturer.
When using the TSI channels as a general purpose ADC we are currently not
doing this and testing suggests that this can result in ADC timeouts:

[ 5827.198289] da9052 spi2.0: timeout waiting for ADC conversion interrupt
[ 5827.728293] da9052 spi2.0: timeout waiting for ADC conversion interrupt
[ 5993.808335] da9052 spi2.0: timeout waiting for ADC conversion interrupt
[ 5994.328441] da9052 spi2.0: timeout waiting for ADC conversion interrupt
[ 5994.848291] da9052 spi2.0: timeout waiting for ADC conversion interrupt

Switching to the 1ms timing resolves this issue.

Fixes: 4f16cab19a3d5 ("hwmon: da9052: Add support for TSI channel")
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-10-21 09:03:29 -07:00
..
2014-08-04 07:01:35 -07:00
2016-06-27 18:58:04 -07:00
2017-04-02 07:01:53 -07:00
2017-04-02 07:01:53 -07:00
2017-04-02 07:01:53 -07:00
2017-04-13 06:09:26 -07:00
2017-04-02 07:01:53 -07:00
2014-08-04 07:01:35 -07:00
2016-03-05 06:25:34 -08:00
2014-08-04 07:01:35 -07:00
2014-08-04 07:01:35 -07:00
2014-01-29 20:40:08 +01:00
2017-02-16 06:49:05 -08:00
2015-06-21 22:54:53 -07:00
2016-12-02 13:28:05 -08:00