Mian Yousaf Kaukab b2d4c54e51 usb: dwc2: gadget: ignore stall check for ep0 ...

dwc2_hsotg_start_req starts a request only if endpoint is not stalled.
Ignore this check for ep0 as core will clear DOEPCTL0.Stall after
sending stall handshake. Prepare instead for receiving next setup
packet.

Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
Tested-by: Robert Baldyga <r.baldyga@samsung.com>
Tested-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Tested-by: John Youn <johnyoun@synopsys.com>
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

2015-10-01 12:40:25 -05:00

..

core_intr.c

usb: dwc2: host: ignore wakeup interrupt if hibernation supported

2015-10-01 12:40:16 -05:00

core.c

usb: dwc2: host: clear pending interrupts prior hibernation

2015-10-01 12:40:17 -05:00

core.h

usb: dwc2: host: add flag to reflect bus state

2015-10-01 12:40:15 -05:00

debug.h

usb: dwc2: move debugfs code to a separate file

2015-04-29 15:18:25 -05:00

debugfs.c

usb: dwc2: Use platform endianness when accessing registers

2015-09-27 10:54:31 -05:00

gadget.c

usb: dwc2: gadget: ignore stall check for ep0

2015-10-01 12:40:25 -05:00

hcd_ddma.c

usb: dwc2: Use platform endianness when accessing registers

2015-09-27 10:54:31 -05:00

hcd_intr.c

usb: dwc2: Use platform endianness when accessing registers

2015-09-27 10:54:31 -05:00

hcd_queue.c

usb: dwc2: host: use correct frame number during qh init

2015-10-01 12:40:18 -05:00

hcd.c

usb: dwc2: host: kill remaining urbs using -ECONNRESET status

2015-10-01 12:40:18 -05:00

hcd.h

usb: dwc2: Use platform endianness when accessing registers

2015-09-27 10:54:31 -05:00

hw.h

usb: dwc2: gadget: replace constants with defines

2015-01-30 10:34:11 -06:00

Kconfig

usb: dwc2: remove dwc2_platform.ko

2015-04-29 15:20:11 -05:00

Makefile

usb: dwc2: remove dwc2_platform.ko

2015-04-29 15:20:11 -05:00

pci.c

usb: dwc2: pci: Add device mode to the dwc2-pci driver

2015-03-11 15:08:17 -05:00

platform.c

usb: dwc2: force dr_mode in case of configuration mismatch

2015-10-01 12:40:23 -05:00