8ffdff6a8c
The comedi code came into the kernel back in 2008, but traces its lifetime to much much earlier. It's been polished and buffed and there's really nothing preventing it from being part of the "real" portion of the kernel. So move it to drivers/comedi/ as it belongs there. Many thanks to the hundreds of developers who did the work to make this happen. Cc: Ian Abbott <abbotti@mev.co.uk> Cc: H Hartley Sweeten <hsweeten@visionengravers.com> Link: https://lore.kernel.org/r/YHauop4u3sP6lz8j@kroah.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
209 lines
5.8 KiB
C
209 lines
5.8 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* adv_pci1724.c
|
|
* Comedi driver for the Advantech PCI-1724U card.
|
|
*
|
|
* Author: Frank Mori Hess <fmh6jj@gmail.com>
|
|
* Copyright (C) 2013 GnuBIO Inc
|
|
*
|
|
* COMEDI - Linux Control and Measurement Device Interface
|
|
* Copyright (C) 1997-8 David A. Schleef <ds@schleef.org>
|
|
*/
|
|
|
|
/*
|
|
* Driver: adv_pci1724
|
|
* Description: Advantech PCI-1724U
|
|
* Devices: [Advantech] PCI-1724U (adv_pci1724)
|
|
* Author: Frank Mori Hess <fmh6jj@gmail.com>
|
|
* Updated: 2013-02-09
|
|
* Status: works
|
|
*
|
|
* Configuration Options: not applicable, uses comedi PCI auto config
|
|
*
|
|
* Subdevice 0 is the analog output.
|
|
* Subdevice 1 is the offset calibration for the analog output.
|
|
* Subdevice 2 is the gain calibration for the analog output.
|
|
*
|
|
* The calibration offset and gains have quite a large effect on the
|
|
* analog output, so it is possible to adjust the analog output to
|
|
* have an output range significantly different from the board's
|
|
* nominal output ranges. For a calibrated +/-10V range, the analog
|
|
* output's offset will be set somewhere near mid-range (0x2000) and
|
|
* its gain will be near maximum (0x3fff).
|
|
*
|
|
* There is really no difference between the board's documented 0-20mA
|
|
* versus 4-20mA output ranges. To pick one or the other is simply a
|
|
* matter of adjusting the offset and gain calibration until the board
|
|
* outputs in the desired range.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include "../comedi_pci.h"
|
|
|
|
/*
|
|
* PCI bar 2 Register I/O map (dev->iobase)
|
|
*/
|
|
#define PCI1724_DAC_CTRL_REG 0x00
|
|
#define PCI1724_DAC_CTRL_GX(x) BIT(20 + ((x) / 8))
|
|
#define PCI1724_DAC_CTRL_CX(x) (((x) % 8) << 16)
|
|
#define PCI1724_DAC_CTRL_MODE(x) (((x) & 0x3) << 14)
|
|
#define PCI1724_DAC_CTRL_MODE_GAIN PCI1724_DAC_CTRL_MODE(1)
|
|
#define PCI1724_DAC_CTRL_MODE_OFFSET PCI1724_DAC_CTRL_MODE(2)
|
|
#define PCI1724_DAC_CTRL_MODE_NORMAL PCI1724_DAC_CTRL_MODE(3)
|
|
#define PCI1724_DAC_CTRL_MODE_MASK PCI1724_DAC_CTRL_MODE(3)
|
|
#define PCI1724_DAC_CTRL_DATA(x) (((x) & 0x3fff) << 0)
|
|
#define PCI1724_SYNC_CTRL_REG 0x04
|
|
#define PCI1724_SYNC_CTRL_DACSTAT BIT(1)
|
|
#define PCI1724_SYNC_CTRL_SYN BIT(0)
|
|
#define PCI1724_EEPROM_CTRL_REG 0x08
|
|
#define PCI1724_SYNC_TRIG_REG 0x0c /* any value works */
|
|
#define PCI1724_BOARD_ID_REG 0x10
|
|
#define PCI1724_BOARD_ID_MASK (0xf << 0)
|
|
|
|
static const struct comedi_lrange adv_pci1724_ao_ranges = {
|
|
4, {
|
|
BIP_RANGE(10),
|
|
RANGE_mA(0, 20),
|
|
RANGE_mA(4, 20),
|
|
RANGE_unitless(0, 1)
|
|
}
|
|
};
|
|
|
|
static int adv_pci1724_dac_idle(struct comedi_device *dev,
|
|
struct comedi_subdevice *s,
|
|
struct comedi_insn *insn,
|
|
unsigned long context)
|
|
{
|
|
unsigned int status;
|
|
|
|
status = inl(dev->iobase + PCI1724_SYNC_CTRL_REG);
|
|
if ((status & PCI1724_SYNC_CTRL_DACSTAT) == 0)
|
|
return 0;
|
|
return -EBUSY;
|
|
}
|
|
|
|
static int adv_pci1724_insn_write(struct comedi_device *dev,
|
|
struct comedi_subdevice *s,
|
|
struct comedi_insn *insn,
|
|
unsigned int *data)
|
|
{
|
|
unsigned long mode = (unsigned long)s->private;
|
|
unsigned int chan = CR_CHAN(insn->chanspec);
|
|
unsigned int ctrl;
|
|
int ret;
|
|
int i;
|
|
|
|
ctrl = PCI1724_DAC_CTRL_GX(chan) | PCI1724_DAC_CTRL_CX(chan) | mode;
|
|
|
|
/* turn off synchronous mode */
|
|
outl(0, dev->iobase + PCI1724_SYNC_CTRL_REG);
|
|
|
|
for (i = 0; i < insn->n; ++i) {
|
|
unsigned int val = data[i];
|
|
|
|
ret = comedi_timeout(dev, s, insn, adv_pci1724_dac_idle, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
outl(ctrl | PCI1724_DAC_CTRL_DATA(val),
|
|
dev->iobase + PCI1724_DAC_CTRL_REG);
|
|
|
|
s->readback[chan] = val;
|
|
}
|
|
|
|
return insn->n;
|
|
}
|
|
|
|
static int adv_pci1724_auto_attach(struct comedi_device *dev,
|
|
unsigned long context_unused)
|
|
{
|
|
struct pci_dev *pcidev = comedi_to_pci_dev(dev);
|
|
struct comedi_subdevice *s;
|
|
unsigned int board_id;
|
|
int ret;
|
|
|
|
ret = comedi_pci_enable(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dev->iobase = pci_resource_start(pcidev, 2);
|
|
board_id = inl(dev->iobase + PCI1724_BOARD_ID_REG);
|
|
dev_info(dev->class_dev, "board id: %d\n",
|
|
board_id & PCI1724_BOARD_ID_MASK);
|
|
|
|
ret = comedi_alloc_subdevices(dev, 3);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Analog Output subdevice */
|
|
s = &dev->subdevices[0];
|
|
s->type = COMEDI_SUBD_AO;
|
|
s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_GROUND;
|
|
s->n_chan = 32;
|
|
s->maxdata = 0x3fff;
|
|
s->range_table = &adv_pci1724_ao_ranges;
|
|
s->insn_write = adv_pci1724_insn_write;
|
|
s->private = (void *)PCI1724_DAC_CTRL_MODE_NORMAL;
|
|
|
|
ret = comedi_alloc_subdev_readback(s);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Offset Calibration subdevice */
|
|
s = &dev->subdevices[1];
|
|
s->type = COMEDI_SUBD_CALIB;
|
|
s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_INTERNAL;
|
|
s->n_chan = 32;
|
|
s->maxdata = 0x3fff;
|
|
s->insn_write = adv_pci1724_insn_write;
|
|
s->private = (void *)PCI1724_DAC_CTRL_MODE_OFFSET;
|
|
|
|
ret = comedi_alloc_subdev_readback(s);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Gain Calibration subdevice */
|
|
s = &dev->subdevices[2];
|
|
s->type = COMEDI_SUBD_CALIB;
|
|
s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_INTERNAL;
|
|
s->n_chan = 32;
|
|
s->maxdata = 0x3fff;
|
|
s->insn_write = adv_pci1724_insn_write;
|
|
s->private = (void *)PCI1724_DAC_CTRL_MODE_GAIN;
|
|
|
|
return comedi_alloc_subdev_readback(s);
|
|
}
|
|
|
|
static struct comedi_driver adv_pci1724_driver = {
|
|
.driver_name = "adv_pci1724",
|
|
.module = THIS_MODULE,
|
|
.auto_attach = adv_pci1724_auto_attach,
|
|
.detach = comedi_pci_detach,
|
|
};
|
|
|
|
static int adv_pci1724_pci_probe(struct pci_dev *dev,
|
|
const struct pci_device_id *id)
|
|
{
|
|
return comedi_pci_auto_config(dev, &adv_pci1724_driver,
|
|
id->driver_data);
|
|
}
|
|
|
|
static const struct pci_device_id adv_pci1724_pci_table[] = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1724) },
|
|
{ 0 }
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, adv_pci1724_pci_table);
|
|
|
|
static struct pci_driver adv_pci1724_pci_driver = {
|
|
.name = "adv_pci1724",
|
|
.id_table = adv_pci1724_pci_table,
|
|
.probe = adv_pci1724_pci_probe,
|
|
.remove = comedi_pci_auto_unconfig,
|
|
};
|
|
module_comedi_pci_driver(adv_pci1724_driver, adv_pci1724_pci_driver);
|
|
|
|
MODULE_AUTHOR("Frank Mori Hess <fmh6jj@gmail.com>");
|
|
MODULE_DESCRIPTION("Advantech PCI-1724U Comedi driver");
|
|
MODULE_LICENSE("GPL");
|