6049af00fc
enable/disable master clock when codec is active or not. Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com> Signed-off-by: Mark Brown <broonie@kernel.org>
60 lines
1.1 KiB
Plaintext
60 lines
1.1 KiB
Plaintext
RT5640/RT5639 audio CODEC
|
|
|
|
This device supports I2C only.
|
|
|
|
Required properties:
|
|
|
|
- compatible : One of "realtek,rt5640" or "realtek,rt5639".
|
|
|
|
- reg : The I2C address of the device.
|
|
|
|
- interrupts : The CODEC's interrupt output.
|
|
|
|
Optional properties:
|
|
|
|
- clocks: The phandle of the master clock to the CODEC
|
|
- clock-names: Should be "mclk"
|
|
|
|
- realtek,in1-differential
|
|
- realtek,in2-differential
|
|
- realtek,in3-differential
|
|
Boolean. Indicate MIC1/2/3 input are differential, rather than single-ended.
|
|
|
|
- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
|
|
|
|
Pins on the device (for linking into audio routes) for RT5639/RT5640:
|
|
|
|
* DMIC1
|
|
* DMIC2
|
|
* MICBIAS1
|
|
* IN1P
|
|
* IN1N
|
|
* IN2P
|
|
* IN2N
|
|
* IN3P
|
|
* IN3N
|
|
* HPOL
|
|
* HPOR
|
|
* LOUTL
|
|
* LOUTR
|
|
* SPOLP
|
|
* SPOLN
|
|
* SPORP
|
|
* SPORN
|
|
|
|
Additional pins on the device for RT5640:
|
|
|
|
* MONOP
|
|
* MONON
|
|
|
|
Example:
|
|
|
|
rt5640 {
|
|
compatible = "realtek,rt5640";
|
|
reg = <0x1c>;
|
|
interrupt-parent = <&gpio>;
|
|
interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
|
|
realtek,ldo1-en-gpios =
|
|
<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
|
|
};
|