d3be83244c
This patch applies the semantic patch: @@ expression I, P, SP; @@ I = devm_iio_device_alloc(P, SP); ... - I->dev.parent = P; It updates 302 files and does 307 deletions. This semantic patch also removes some comments like '/* Establish that the iio_dev is a child of the i2c device */' But this is is only done in case where the block is left empty. The patch does not seem to cover all cases. It looks like in some cases a different variable is used in some cases to assign the parent, but it points to the same reference. In other cases, the block covered by ... may be just too big to be covered by the semantic patch. However, this looks pretty good as well, as it does cover a big bulk of the drivers that should remove the parent assignment. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
190 lines
4.7 KiB
C
190 lines
4.7 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* tsys02d.c - Support for Measurement-Specialties tsys02d temperature sensor
|
|
*
|
|
* Copyright (c) 2015 Measurement-Specialties
|
|
*
|
|
* (7-bit I2C slave address 0x40)
|
|
*
|
|
* Datasheet:
|
|
* http://www.meas-spec.com/downloads/Digital_Sensor_TSYS02D.pdf
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/device.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/stat.h>
|
|
#include <linux/module.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
|
|
#include "../common/ms_sensors/ms_sensors_i2c.h"
|
|
|
|
#define TSYS02D_RESET 0xFE
|
|
|
|
static const int tsys02d_samp_freq[4] = { 20, 40, 70, 140 };
|
|
/* String copy of the above const for readability purpose */
|
|
static const char tsys02d_show_samp_freq[] = "20 40 70 140";
|
|
|
|
static int tsys02d_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *channel, int *val,
|
|
int *val2, long mask)
|
|
{
|
|
int ret;
|
|
s32 temperature;
|
|
struct ms_ht_dev *dev_data = iio_priv(indio_dev);
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_PROCESSED:
|
|
switch (channel->type) {
|
|
case IIO_TEMP: /* in milli °C */
|
|
ret = ms_sensors_ht_read_temperature(dev_data,
|
|
&temperature);
|
|
if (ret)
|
|
return ret;
|
|
*val = temperature;
|
|
|
|
return IIO_VAL_INT;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
*val = tsys02d_samp_freq[dev_data->res_index];
|
|
|
|
return IIO_VAL_INT;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int tsys02d_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int val, int val2, long mask)
|
|
{
|
|
struct ms_ht_dev *dev_data = iio_priv(indio_dev);
|
|
int i, ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
i = ARRAY_SIZE(tsys02d_samp_freq);
|
|
while (i-- > 0)
|
|
if (val == tsys02d_samp_freq[i])
|
|
break;
|
|
if (i < 0)
|
|
return -EINVAL;
|
|
mutex_lock(&dev_data->lock);
|
|
dev_data->res_index = i;
|
|
ret = ms_sensors_write_resolution(dev_data, i);
|
|
mutex_unlock(&dev_data->lock);
|
|
|
|
return ret;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static const struct iio_chan_spec tsys02d_channels[] = {
|
|
{
|
|
.type = IIO_TEMP,
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_PROCESSED),
|
|
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
|
|
}
|
|
};
|
|
|
|
static ssize_t tsys02_read_battery_low(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
|
|
struct ms_ht_dev *dev_data = iio_priv(indio_dev);
|
|
|
|
return ms_sensors_show_battery_low(dev_data, buf);
|
|
}
|
|
|
|
static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(tsys02d_show_samp_freq);
|
|
static IIO_DEVICE_ATTR(battery_low, S_IRUGO,
|
|
tsys02_read_battery_low, NULL, 0);
|
|
|
|
static struct attribute *tsys02d_attributes[] = {
|
|
&iio_const_attr_sampling_frequency_available.dev_attr.attr,
|
|
&iio_dev_attr_battery_low.dev_attr.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group tsys02d_attribute_group = {
|
|
.attrs = tsys02d_attributes,
|
|
};
|
|
|
|
static const struct iio_info tsys02d_info = {
|
|
.read_raw = tsys02d_read_raw,
|
|
.write_raw = tsys02d_write_raw,
|
|
.attrs = &tsys02d_attribute_group,
|
|
};
|
|
|
|
static int tsys02d_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct ms_ht_dev *dev_data;
|
|
struct iio_dev *indio_dev;
|
|
int ret;
|
|
u64 serial_number;
|
|
|
|
if (!i2c_check_functionality(client->adapter,
|
|
I2C_FUNC_SMBUS_WRITE_BYTE_DATA |
|
|
I2C_FUNC_SMBUS_WRITE_BYTE |
|
|
I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
|
|
dev_err(&client->dev,
|
|
"Adapter does not support some i2c transaction\n");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dev_data));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
dev_data = iio_priv(indio_dev);
|
|
dev_data->client = client;
|
|
dev_data->res_index = 0;
|
|
mutex_init(&dev_data->lock);
|
|
|
|
indio_dev->info = &tsys02d_info;
|
|
indio_dev->name = id->name;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->channels = tsys02d_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(tsys02d_channels);
|
|
|
|
i2c_set_clientdata(client, indio_dev);
|
|
|
|
ret = ms_sensors_reset(client, TSYS02D_RESET, 15000);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ms_sensors_read_serial(client, &serial_number);
|
|
if (ret)
|
|
return ret;
|
|
dev_info(&client->dev, "Serial number : %llx", serial_number);
|
|
|
|
return devm_iio_device_register(&client->dev, indio_dev);
|
|
}
|
|
|
|
static const struct i2c_device_id tsys02d_id[] = {
|
|
{"tsys02d", 0},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, tsys02d_id);
|
|
|
|
static struct i2c_driver tsys02d_driver = {
|
|
.probe = tsys02d_probe,
|
|
.id_table = tsys02d_id,
|
|
.driver = {
|
|
.name = "tsys02d",
|
|
},
|
|
};
|
|
|
|
module_i2c_driver(tsys02d_driver);
|
|
|
|
MODULE_DESCRIPTION("Measurement-Specialties tsys02d temperature driver");
|
|
MODULE_AUTHOR("William Markezana <william.markezana@meas-spec.com>");
|
|
MODULE_AUTHOR("Ludovic Tancerel <ludovic.tancerel@maplehightech.com>");
|
|
MODULE_LICENSE("GPL v2");
|