b72f3f7200
I210 device IPv6 autoconf test sometimes fails, because DAD NS for link-local is not transmitted. This packet is silently dropped. This problem is seen only GbE environment. igb_watchdog_task link up detection continues to the following process. The following cases are observed: 1.PHY 1000BASE-T Status Register Remote receiver status bit is NG. (NG status becomes OK after about 200 - 700ms) 2.In this case, the transfer packet is silently dropped. 1000BASE-T Status register [Expected]: 0x3800 or 0x7800 [problem occurred]: 0x2800 or 0x6800 Frequency of occurrence: approx 1/10 - 1/40 observed In order to avoid this problem, wait until 1000BASE-T Status register "Remote receiver status OK" After applying this patch, at least 400 runs succeed with no problems. Signed-off-by: Takuma Ueba <t.ueba11@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> |
||
---|---|---|
.. | ||
e1000_82575.c | ||
e1000_82575.h | ||
e1000_defines.h | ||
e1000_hw.h | ||
e1000_i210.c | ||
e1000_i210.h | ||
e1000_mac.c | ||
e1000_mac.h | ||
e1000_mbx.c | ||
e1000_mbx.h | ||
e1000_nvm.c | ||
e1000_nvm.h | ||
e1000_phy.c | ||
e1000_phy.h | ||
e1000_regs.h | ||
igb_ethtool.c | ||
igb_hwmon.c | ||
igb_main.c | ||
igb_ptp.c | ||
igb.h | ||
Makefile |