iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
b857cacd74
linux/drivers/s390/scsi/zfcp_scsi.c
Linus Torvalds ead751507d License cleanup: add SPDX license identifiers to some files 
Many source files in the tree are missing licensing information, which
 makes it harder for compliance tools to determine the correct license.
 
 By default all files without license information are under the default
 license of the kernel, which is GPL version 2.
 
 Update the files which contain no license information with the 'GPL-2.0'
 SPDX license identifier.  The SPDX identifier is a legally binding
 shorthand, which can be used instead of the full boiler plate text.
 
 This patch is based on work done by Thomas Gleixner and Kate Stewart and
 Philippe Ombredanne.
 
 How this work was done:
 
 Patches were generated and checked against linux-4.14-rc6 for a subset of
 the use cases:
  - file had no licensing information it it.
  - file was a */uapi/* one with no licensing information in it,
  - file was a */uapi/* one with existing licensing information,
 
 Further patches will be generated in subsequent months to fix up cases
 where non-standard license headers were used, and references to license
 had to be inferred by heuristics based on keywords.
 
 The analysis to determine which SPDX License Identifier to be applied to
 a file was done in a spreadsheet of side by side results from of the
 output of two independent scanners (ScanCode & Windriver) producing SPDX
 tag:value files created by Philippe Ombredanne.  Philippe prepared the
 base worksheet, and did an initial spot review of a few 1000 files.
 
 The 4.13 kernel was the starting point of the analysis with 60,537 files
 assessed.  Kate Stewart did a file by file comparison of the scanner
 results in the spreadsheet to determine which SPDX license identifier(s)
 to be applied to the file. She confirmed any determination that was not
 immediately clear with lawyers working with the Linux Foundation.
 
 Criteria used to select files for SPDX license identifier tagging was:
  - Files considered eligible had to be source code files.
  - Make and config files were included as candidates if they contained >5
    lines of source
  - File already had some variant of a license header in it (even if <5
    lines).
 
 All documentation files were explicitly excluded.
 
 The following heuristics were used to determine which SPDX license
 identifiers to apply.
 
  - when both scanners couldn't find any license traces, file was
    considered to have no license information in it, and the top level
    COPYING file license applied.
 
    For non */uapi/* files that summary was:
 
    SPDX license identifier                            # files
    ---------------------------------------------------|-------
    GPL-2.0                                              11139
 
    and resulted in the first patch in this series.
 
    If that file was a */uapi/* path one, it was "GPL-2.0 WITH
    Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:
 
    SPDX license identifier                            # files
    ---------------------------------------------------|-------
    GPL-2.0 WITH Linux-syscall-note                        930
 
    and resulted in the second patch in this series.
 
  - if a file had some form of licensing information in it, and was one
    of the */uapi/* ones, it was denoted with the Linux-syscall-note if
    any GPL family license was found in the file or had no licensing in
    it (per prior point).  Results summary:
 
    SPDX license identifier                            # files
    ---------------------------------------------------|------
    GPL-2.0 WITH Linux-syscall-note                       270
    GPL-2.0+ WITH Linux-syscall-note                      169
    ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
    ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
    LGPL-2.1+ WITH Linux-syscall-note                      15
    GPL-1.0+ WITH Linux-syscall-note                       14
    ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
    LGPL-2.0+ WITH Linux-syscall-note                       4
    LGPL-2.1 WITH Linux-syscall-note                        3
    ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
    ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1
 
    and that resulted in the third patch in this series.
 
  - when the two scanners agreed on the detected license(s), that became
    the concluded license(s).
 
  - when there was disagreement between the two scanners (one detected a
    license but the other didn't, or they both detected different
    licenses) a manual inspection of the file occurred.
 
  - In most cases a manual inspection of the information in the file
    resulted in a clear resolution of the license that should apply (and
    which scanner probably needed to revisit its heuristics).
 
  - When it was not immediately clear, the license identifier was
    confirmed with lawyers working with the Linux Foundation.
 
  - If there was any question as to the appropriate license identifier,
    the file was flagged for further research and to be revisited later
    in time.
 
 In total, over 70 hours of logged manual review was done on the
 spreadsheet to determine the SPDX license identifiers to apply to the
 source files by Kate, Philippe, Thomas and, in some cases, confirmation
 by lawyers working with the Linux Foundation.
 
 Kate also obtained a third independent scan of the 4.13 code base from
 FOSSology, and compared selected files where the other two scanners
 disagreed against that SPDX file, to see if there was new insights.  The
 Windriver scanner is based on an older version of FOSSology in part, so
 they are related.
 
 Thomas did random spot checks in about 500 files from the spreadsheets
 for the uapi headers and agreed with SPDX license identifier in the
 files he inspected. For the non-uapi files Thomas did random spot checks
 in about 15000 files.
 
 In initial set of patches against 4.14-rc6, 3 files were found to have
 copy/paste license identifier errors, and have been fixed to reflect the
 correct identifier.
 
 Additionally Philippe spent 10 hours this week doing a detailed manual
 inspection and review of the 12,461 patched files from the initial patch
 version early this week with:
  - a full scancode scan run, collecting the matched texts, detected
    license ids and scores
  - reviewing anything where there was a license detected (about 500+
    files) to ensure that the applied SPDX license was correct
  - reviewing anything where there was no detection but the patch license
    was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
    SPDX license was correct
 
 This produced a worksheet with 20 files needing minor correction.  This
 worksheet was then exported into 3 different .csv files for the
 different types of files to be modified.
 
 These .csv files were then reviewed by Greg.  Thomas wrote a script to
 parse the csv files and add the proper SPDX tag to the file, in the
 format that the file expected.  This script was further refined by Greg
 based on the output to detect more types of files automatically and to
 distinguish between header and source .c files (which need different
 comment types.)  Finally Greg ran the script using the .csv files to
 generate the patches.
 
 Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
 Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
 Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWfswbQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykvEwCfXU1MuYFQGgMdDmAZXEc+xFXZvqgAoKEcHDNA
 6dVh26uchcEQLN/XqUDt
 =x306
 -----END PGP SIGNATURE-----

Merge tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull initial SPDX identifiers from Greg KH:
 "License cleanup: add SPDX license identifiers to some files

  Many source files in the tree are missing licensing information, which
  makes it harder for compliance tools to determine the correct license.

  By default all files without license information are under the default
  license of the kernel, which is GPL version 2.

  Update the files which contain no license information with the
  'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally
  binding shorthand, which can be used instead of the full boiler plate
  text.

  This patch is based on work done by Thomas Gleixner and Kate Stewart
  and Philippe Ombredanne.

  How this work was done:

  Patches were generated and checked against linux-4.14-rc6 for a subset
  of the use cases:

   - file had no licensing information it it.

   - file was a */uapi/* one with no licensing information in it,

   - file was a */uapi/* one with existing licensing information,

  Further patches will be generated in subsequent months to fix up cases
  where non-standard license headers were used, and references to
  license had to be inferred by heuristics based on keywords.

  The analysis to determine which SPDX License Identifier to be applied
  to a file was done in a spreadsheet of side by side results from of
  the output of two independent scanners (ScanCode & Windriver)
  producing SPDX tag:value files created by Philippe Ombredanne.
  Philippe prepared the base worksheet, and did an initial spot review
  of a few 1000 files.

  The 4.13 kernel was the starting point of the analysis with 60,537
  files assessed. Kate Stewart did a file by file comparison of the
  scanner results in the spreadsheet to determine which SPDX license
  identifier(s) to be applied to the file. She confirmed any
  determination that was not immediately clear with lawyers working with
  the Linux Foundation.

  Criteria used to select files for SPDX license identifier tagging was:

   - Files considered eligible had to be source code files.

   - Make and config files were included as candidates if they contained
     >5 lines of source

   - File already had some variant of a license header in it (even if <5
     lines).

  All documentation files were explicitly excluded.

  The following heuristics were used to determine which SPDX license
  identifiers to apply.

   - when both scanners couldn't find any license traces, file was
     considered to have no license information in it, and the top level
     COPYING file license applied.

     For non */uapi/* files that summary was:

       SPDX license identifier                            # files
       ---------------------------------------------------|-------
       GPL-2.0                                              11139

     and resulted in the first patch in this series.

     If that file was a */uapi/* path one, it was "GPL-2.0 WITH
     Linux-syscall-note" otherwise it was "GPL-2.0". Results of that
     was:

       SPDX license identifier                            # files
       ---------------------------------------------------|-------
       GPL-2.0 WITH Linux-syscall-note                        930

     and resulted in the second patch in this series.

   - if a file had some form of licensing information in it, and was one
     of the */uapi/* ones, it was denoted with the Linux-syscall-note if
     any GPL family license was found in the file or had no licensing in
     it (per prior point). Results summary:

       SPDX license identifier                            # files
       ---------------------------------------------------|------
       GPL-2.0 WITH Linux-syscall-note                       270
       GPL-2.0+ WITH Linux-syscall-note                      169
       ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
       ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
       LGPL-2.1+ WITH Linux-syscall-note                      15
       GPL-1.0+ WITH Linux-syscall-note                       14
       ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
       LGPL-2.0+ WITH Linux-syscall-note                       4
       LGPL-2.1 WITH Linux-syscall-note                        3
       ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
       ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

     and that resulted in the third patch in this series.

   - when the two scanners agreed on the detected license(s), that
     became the concluded license(s).

   - when there was disagreement between the two scanners (one detected
     a license but the other didn't, or they both detected different
     licenses) a manual inspection of the file occurred.

   - In most cases a manual inspection of the information in the file
     resulted in a clear resolution of the license that should apply
     (and which scanner probably needed to revisit its heuristics).

   - When it was not immediately clear, the license identifier was
     confirmed with lawyers working with the Linux Foundation.

   - If there was any question as to the appropriate license identifier,
     the file was flagged for further research and to be revisited later
     in time.

  In total, over 70 hours of logged manual review was done on the
  spreadsheet to determine the SPDX license identifiers to apply to the
  source files by Kate, Philippe, Thomas and, in some cases,
  confirmation by lawyers working with the Linux Foundation.

  Kate also obtained a third independent scan of the 4.13 code base from
  FOSSology, and compared selected files where the other two scanners
  disagreed against that SPDX file, to see if there was new insights.
  The Windriver scanner is based on an older version of FOSSology in
  part, so they are related.

  Thomas did random spot checks in about 500 files from the spreadsheets
  for the uapi headers and agreed with SPDX license identifier in the
  files he inspected. For the non-uapi files Thomas did random spot
  checks in about 15000 files.

  In initial set of patches against 4.14-rc6, 3 files were found to have
  copy/paste license identifier errors, and have been fixed to reflect
  the correct identifier.

  Additionally Philippe spent 10 hours this week doing a detailed manual
  inspection and review of the 12,461 patched files from the initial
  patch version early this week with:

   - a full scancode scan run, collecting the matched texts, detected
     license ids and scores

   - reviewing anything where there was a license detected (about 500+
     files) to ensure that the applied SPDX license was correct

   - reviewing anything where there was no detection but the patch
     license was not GPL-2.0 WITH Linux-syscall-note to ensure that the
     applied SPDX license was correct

  This produced a worksheet with 20 files needing minor correction. This
  worksheet was then exported into 3 different .csv files for the
  different types of files to be modified.

  These .csv files were then reviewed by Greg. Thomas wrote a script to
  parse the csv files and add the proper SPDX tag to the file, in the
  format that the file expected. This script was further refined by Greg
  based on the output to detect more types of files automatically and to
  distinguish between header and source .c files (which need different
  comment types.) Finally Greg ran the script using the .csv files to
  generate the patches.

  Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
  Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
  Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  License cleanup: add SPDX license identifier to uapi header files with a license
  License cleanup: add SPDX license identifier to uapi header files with no license
  License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02 10:04:46 -07:00

781 lines
22 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
/*
* zfcp device driver
*
* Interface to Linux SCSI midlayer.
*
* Copyright IBM Corp. 2002, 2017
*/
#define KMSG_COMPONENT "zfcp"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
#include <linux/module.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <scsi/fc/fc_fcp.h>
#include <scsi/scsi_eh.h>
#include <linux/atomic.h>
#include "zfcp_ext.h"
#include "zfcp_dbf.h"
#include "zfcp_fc.h"
#include "zfcp_reqlist.h"
static unsigned int default_depth = 32;
module_param_named(queue_depth, default_depth, uint, 0600);
MODULE_PARM_DESC(queue_depth, "Default queue depth for new SCSI devices");
static bool enable_dif;
module_param_named(dif, enable_dif, bool, 0400);
MODULE_PARM_DESC(dif, "Enable DIF/DIX data integrity support");
static bool allow_lun_scan = true;
module_param(allow_lun_scan, bool, 0600);
MODULE_PARM_DESC(allow_lun_scan, "For NPIV, scan and attach all storage LUNs");
static void zfcp_scsi_slave_destroy(struct scsi_device *sdev)
{
struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(sdev);
/* if previous slave_alloc returned early, there is nothing to do */
if (!zfcp_sdev->port)
return;
zfcp_erp_lun_shutdown_wait(sdev, "scssd_1");
put_device(&zfcp_sdev->port->dev);
}
static int zfcp_scsi_slave_configure(struct scsi_device *sdp)
{
if (sdp->tagged_supported)
scsi_change_queue_depth(sdp, default_depth);
return 0;
}
static void zfcp_scsi_command_fail(struct scsi_cmnd *scpnt, int result)
{
set_host_byte(scpnt, result);
zfcp_dbf_scsi_fail_send(scpnt);
scpnt->scsi_done(scpnt);
}
static
int zfcp_scsi_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *scpnt)
{
struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(scpnt->device);
struct fc_rport *rport = starget_to_rport(scsi_target(scpnt->device));
int status, scsi_result, ret;
/* reset the status for this request */
scpnt->result = 0;
scpnt->host_scribble = NULL;
scsi_result = fc_remote_port_chkready(rport);
if (unlikely(scsi_result)) {
scpnt->result = scsi_result;
zfcp_dbf_scsi_fail_send(scpnt);
scpnt->scsi_done(scpnt);
return 0;
}
status = atomic_read(&zfcp_sdev->status);
if (unlikely(status & ZFCP_STATUS_COMMON_ERP_FAILED) &&
!(atomic_read(&zfcp_sdev->port->status) &
ZFCP_STATUS_COMMON_ERP_FAILED)) {
/* only LUN access denied, but port is good
* not covered by FC transport, have to fail here */
zfcp_scsi_command_fail(scpnt, DID_ERROR);
return 0;
}
if (unlikely(!(status & ZFCP_STATUS_COMMON_UNBLOCKED))) {
/* This could be
* call to rport_delete pending: mimic retry from
* fc_remote_port_chkready until rport is BLOCKED
*/
zfcp_scsi_command_fail(scpnt, DID_IMM_RETRY);
return 0;
}
ret = zfcp_fsf_fcp_cmnd(scpnt);
if (unlikely(ret == -EBUSY))
return SCSI_MLQUEUE_DEVICE_BUSY;
else if (unlikely(ret < 0))
return SCSI_MLQUEUE_HOST_BUSY;
return ret;
}
static int zfcp_scsi_slave_alloc(struct scsi_device *sdev)
{
struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
struct zfcp_adapter *adapter =
(struct zfcp_adapter *) sdev->host->hostdata[0];
struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(sdev);
struct zfcp_port *port;
struct zfcp_unit *unit;
int npiv = adapter->connection_features & FSF_FEATURE_NPIV_MODE;
zfcp_sdev->erp_action.adapter = adapter;
zfcp_sdev->erp_action.sdev = sdev;
port = zfcp_get_port_by_wwpn(adapter, rport->port_name);
if (!port)
return -ENXIO;
zfcp_sdev->erp_action.port = port;
unit = zfcp_unit_find(port, zfcp_scsi_dev_lun(sdev));
if (unit)
put_device(&unit->dev);
if (!unit && !(allow_lun_scan && npiv)) {
put_device(&port->dev);
return -ENXIO;
}
zfcp_sdev->port = port;
zfcp_sdev->latencies.write.channel.min = 0xFFFFFFFF;
zfcp_sdev->latencies.write.fabric.min = 0xFFFFFFFF;
zfcp_sdev->latencies.read.channel.min = 0xFFFFFFFF;
zfcp_sdev->latencies.read.fabric.min = 0xFFFFFFFF;
zfcp_sdev->latencies.cmd.channel.min = 0xFFFFFFFF;
zfcp_sdev->latencies.cmd.fabric.min = 0xFFFFFFFF;
spin_lock_init(&zfcp_sdev->latencies.lock);
zfcp_erp_set_lun_status(sdev, ZFCP_STATUS_COMMON_RUNNING);
zfcp_erp_lun_reopen(sdev, 0, "scsla_1");
zfcp_erp_wait(port->adapter);
return 0;
}
static int zfcp_scsi_eh_abort_handler(struct scsi_cmnd *scpnt)
{
struct Scsi_Host *scsi_host = scpnt->device->host;
struct zfcp_adapter *adapter =
(struct zfcp_adapter *) scsi_host->hostdata[0];
struct zfcp_fsf_req *old_req, *abrt_req;
unsigned long flags;
unsigned long old_reqid = (unsigned long) scpnt->host_scribble;
int retval = SUCCESS, ret;
int retry = 3;
char *dbf_tag;
/* avoid race condition between late normal completion and abort */
write_lock_irqsave(&adapter->abort_lock, flags);
old_req = zfcp_reqlist_find(adapter->req_list, old_reqid);
if (!old_req) {
write_unlock_irqrestore(&adapter->abort_lock, flags);
zfcp_dbf_scsi_abort("abrt_or", scpnt, NULL);
return FAILED; /* completion could be in progress */
}
old_req->data = NULL;
/* don't access old fsf_req after releasing the abort_lock */
write_unlock_irqrestore(&adapter->abort_lock, flags);
while (retry--) {
abrt_req = zfcp_fsf_abort_fcp_cmnd(scpnt);
if (abrt_req)
break;
zfcp_erp_wait(adapter);
ret = fc_block_scsi_eh(scpnt);
if (ret) {
zfcp_dbf_scsi_abort("abrt_bl", scpnt, NULL);
return ret;
}
if (!(atomic_read(&adapter->status) &
ZFCP_STATUS_COMMON_RUNNING)) {
zfcp_dbf_scsi_abort("abrt_ru", scpnt, NULL);
return SUCCESS;
}
}
if (!abrt_req) {
zfcp_dbf_scsi_abort("abrt_ar", scpnt, NULL);
return FAILED;
}
wait_for_completion(&abrt_req->completion);
if (abrt_req->status & ZFCP_STATUS_FSFREQ_ABORTSUCCEEDED)
dbf_tag = "abrt_ok";
else if (abrt_req->status & ZFCP_STATUS_FSFREQ_ABORTNOTNEEDED)
dbf_tag = "abrt_nn";
else {
dbf_tag = "abrt_fa";
retval = FAILED;
}
zfcp_dbf_scsi_abort(dbf_tag, scpnt, abrt_req);
zfcp_fsf_req_free(abrt_req);
return retval;
}
struct zfcp_scsi_req_filter {
u8 tmf_scope;
u32 lun_handle;
u32 port_handle;
};
static void zfcp_scsi_forget_cmnd(struct zfcp_fsf_req *old_req, void *data)
{
struct zfcp_scsi_req_filter *filter =
(struct zfcp_scsi_req_filter *)data;
/* already aborted - prevent side-effects - or not a SCSI command */
if (old_req->data == NULL || old_req->fsf_command != FSF_QTCB_FCP_CMND)
return;
/* (tmf_scope == FCP_TMF_TGT_RESET || tmf_scope == FCP_TMF_LUN_RESET) */
if (old_req->qtcb->header.port_handle != filter->port_handle)
return;
if (filter->tmf_scope == FCP_TMF_LUN_RESET &&
old_req->qtcb->header.lun_handle != filter->lun_handle)
return;
zfcp_dbf_scsi_nullcmnd((struct scsi_cmnd *)old_req->data, old_req);
old_req->data = NULL;
}
static void zfcp_scsi_forget_cmnds(struct zfcp_scsi_dev *zsdev, u8 tm_flags)
{
struct zfcp_adapter *adapter = zsdev->port->adapter;
struct zfcp_scsi_req_filter filter = {
.tmf_scope = FCP_TMF_TGT_RESET,
.port_handle = zsdev->port->handle,
};
unsigned long flags;
if (tm_flags == FCP_TMF_LUN_RESET) {
filter.tmf_scope = FCP_TMF_LUN_RESET;
filter.lun_handle = zsdev->lun_handle;
}
/*
* abort_lock secures against other processings - in the abort-function
* and normal cmnd-handler - of (struct zfcp_fsf_req *)->data
*/
write_lock_irqsave(&adapter->abort_lock, flags);
zfcp_reqlist_apply_for_all(adapter->req_list, zfcp_scsi_forget_cmnd,
&filter);
write_unlock_irqrestore(&adapter->abort_lock, flags);
}
static int zfcp_task_mgmt_function(struct scsi_cmnd *scpnt, u8 tm_flags)
{
struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(scpnt->device);
struct zfcp_adapter *adapter = zfcp_sdev->port->adapter;
struct zfcp_fsf_req *fsf_req = NULL;
int retval = SUCCESS, ret;
int retry = 3;
while (retry--) {
fsf_req = zfcp_fsf_fcp_task_mgmt(scpnt, tm_flags);
if (fsf_req)
break;
zfcp_erp_wait(adapter);
ret = fc_block_scsi_eh(scpnt);
if (ret) {
zfcp_dbf_scsi_devreset("fiof", scpnt, tm_flags, NULL);
return ret;
}
if (!(atomic_read(&adapter->status) &
ZFCP_STATUS_COMMON_RUNNING)) {
zfcp_dbf_scsi_devreset("nres", scpnt, tm_flags, NULL);
return SUCCESS;
}
}
if (!fsf_req) {
zfcp_dbf_scsi_devreset("reqf", scpnt, tm_flags, NULL);
return FAILED;
}
wait_for_completion(&fsf_req->completion);
if (fsf_req->status & ZFCP_STATUS_FSFREQ_TMFUNCFAILED) {
zfcp_dbf_scsi_devreset("fail", scpnt, tm_flags, fsf_req);
retval = FAILED;
} else {
zfcp_dbf_scsi_devreset("okay", scpnt, tm_flags, fsf_req);
zfcp_scsi_forget_cmnds(zfcp_sdev, tm_flags);
}
zfcp_fsf_req_free(fsf_req);
return retval;
}
static int zfcp_scsi_eh_device_reset_handler(struct scsi_cmnd *scpnt)
{
return zfcp_task_mgmt_function(scpnt, FCP_TMF_LUN_RESET);
}
static int zfcp_scsi_eh_target_reset_handler(struct scsi_cmnd *scpnt)
{
return zfcp_task_mgmt_function(scpnt, FCP_TMF_TGT_RESET);
}
static int zfcp_scsi_eh_host_reset_handler(struct scsi_cmnd *scpnt)
{
struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(scpnt->device);
struct zfcp_adapter *adapter = zfcp_sdev->port->adapter;
int ret;
zfcp_erp_adapter_reopen(adapter, 0, "schrh_1");
zfcp_erp_wait(adapter);
ret = fc_block_scsi_eh(scpnt);
if (ret)
return ret;
return SUCCESS;
}
struct scsi_transport_template *zfcp_scsi_transport_template;
static struct scsi_host_template zfcp_scsi_host_template = {
.module = THIS_MODULE,
.name = "zfcp",
.queuecommand = zfcp_scsi_queuecommand,
.eh_timed_out = fc_eh_timed_out,
.eh_abort_handler = zfcp_scsi_eh_abort_handler,
.eh_device_reset_handler = zfcp_scsi_eh_device_reset_handler,
.eh_target_reset_handler = zfcp_scsi_eh_target_reset_handler,
.eh_host_reset_handler = zfcp_scsi_eh_host_reset_handler,
.slave_alloc = zfcp_scsi_slave_alloc,
.slave_configure = zfcp_scsi_slave_configure,
.slave_destroy = zfcp_scsi_slave_destroy,
.change_queue_depth = scsi_change_queue_depth,
.proc_name = "zfcp",
.can_queue = 4096,
.this_id = -1,
.sg_tablesize = (((QDIO_MAX_ELEMENTS_PER_BUFFER - 1)
* ZFCP_QDIO_MAX_SBALS_PER_REQ) - 2),
/* GCD, adjusted later */
.max_sectors = (((QDIO_MAX_ELEMENTS_PER_BUFFER - 1)
* ZFCP_QDIO_MAX_SBALS_PER_REQ) - 2) * 8,
/* GCD, adjusted later */
.dma_boundary = ZFCP_QDIO_SBALE_LEN - 1,
.use_clustering = 1,
.shost_attrs = zfcp_sysfs_shost_attrs,
.sdev_attrs = zfcp_sysfs_sdev_attrs,
.track_queue_depth = 1,
};
/**
* zfcp_scsi_adapter_register - Register SCSI and FC host with SCSI midlayer
* @adapter: The zfcp adapter to register with the SCSI midlayer
*/
int zfcp_scsi_adapter_register(struct zfcp_adapter *adapter)
{
struct ccw_dev_id dev_id;
if (adapter->scsi_host)
return 0;
ccw_device_get_id(adapter->ccw_device, &dev_id);
/* register adapter as SCSI host with mid layer of SCSI stack */
adapter->scsi_host = scsi_host_alloc(&zfcp_scsi_host_template,
sizeof (struct zfcp_adapter *));
if (!adapter->scsi_host) {
dev_err(&adapter->ccw_device->dev,
"Registering the FCP device with the "
"SCSI stack failed\n");
return -EIO;
}
/* tell the SCSI stack some characteristics of this adapter */
adapter->scsi_host->max_id = 511;
adapter->scsi_host->max_lun = 0xFFFFFFFF;
adapter->scsi_host->max_channel = 0;
adapter->scsi_host->unique_id = dev_id.devno;
adapter->scsi_host->max_cmd_len = 16; /* in struct fcp_cmnd */
adapter->scsi_host->transportt = zfcp_scsi_transport_template;
adapter->scsi_host->hostdata[0] = (unsigned long) adapter;
if (scsi_add_host(adapter->scsi_host, &adapter->ccw_device->dev)) {
scsi_host_put(adapter->scsi_host);
return -EIO;
}
return 0;
}
/**
* zfcp_scsi_adapter_unregister - Unregister SCSI and FC host from SCSI midlayer
* @adapter: The zfcp adapter to unregister.
*/
void zfcp_scsi_adapter_unregister(struct zfcp_adapter *adapter)
{
struct Scsi_Host *shost;
struct zfcp_port *port;
shost = adapter->scsi_host;
if (!shost)
return;
read_lock_irq(&adapter->port_list_lock);
list_for_each_entry(port, &adapter->port_list, list)
port->rport = NULL;
read_unlock_irq(&adapter->port_list_lock);
fc_remove_host(shost);
scsi_remove_host(shost);
scsi_host_put(shost);
adapter->scsi_host = NULL;
}
static struct fc_host_statistics*
zfcp_init_fc_host_stats(struct zfcp_adapter *adapter)
{
struct fc_host_statistics *fc_stats;
if (!adapter->fc_stats) {
fc_stats = kmalloc(sizeof(*fc_stats), GFP_KERNEL);
if (!fc_stats)
return NULL;
adapter->fc_stats = fc_stats; /* freed in adapter_release */
}
memset(adapter->fc_stats, 0, sizeof(*adapter->fc_stats));
return adapter->fc_stats;
}
static void zfcp_adjust_fc_host_stats(struct fc_host_statistics *fc_stats,
struct fsf_qtcb_bottom_port *data,
struct fsf_qtcb_bottom_port *old)
{
fc_stats->seconds_since_last_reset =
data->seconds_since_last_reset - old->seconds_since_last_reset;
fc_stats->tx_frames = data->tx_frames - old->tx_frames;
fc_stats->tx_words = data->tx_words - old->tx_words;
fc_stats->rx_frames = data->rx_frames - old->rx_frames;
fc_stats->rx_words = data->rx_words - old->rx_words;
fc_stats->lip_count = data->lip - old->lip;
fc_stats->nos_count = data->nos - old->nos;
fc_stats->error_frames = data->error_frames - old->error_frames;
fc_stats->dumped_frames = data->dumped_frames - old->dumped_frames;
fc_stats->link_failure_count = data->link_failure - old->link_failure;
fc_stats->loss_of_sync_count = data->loss_of_sync - old->loss_of_sync;
fc_stats->loss_of_signal_count =
data->loss_of_signal - old->loss_of_signal;
fc_stats->prim_seq_protocol_err_count =
data->psp_error_counts - old->psp_error_counts;
fc_stats->invalid_tx_word_count =
data->invalid_tx_words - old->invalid_tx_words;
fc_stats->invalid_crc_count = data->invalid_crcs - old->invalid_crcs;
fc_stats->fcp_input_requests =
data->input_requests - old->input_requests;
fc_stats->fcp_output_requests =
data->output_requests - old->output_requests;
fc_stats->fcp_control_requests =
data->control_requests - old->control_requests;
fc_stats->fcp_input_megabytes = data->input_mb - old->input_mb;
fc_stats->fcp_output_megabytes = data->output_mb - old->output_mb;
}
static void zfcp_set_fc_host_stats(struct fc_host_statistics *fc_stats,
struct fsf_qtcb_bottom_port *data)
{
fc_stats->seconds_since_last_reset = data->seconds_since_last_reset;
fc_stats->tx_frames = data->tx_frames;
fc_stats->tx_words = data->tx_words;
fc_stats->rx_frames = data->rx_frames;
fc_stats->rx_words = data->rx_words;
fc_stats->lip_count = data->lip;
fc_stats->nos_count = data->nos;
fc_stats->error_frames = data->error_frames;
fc_stats->dumped_frames = data->dumped_frames;
fc_stats->link_failure_count = data->link_failure;
fc_stats->loss_of_sync_count = data->loss_of_sync;
fc_stats->loss_of_signal_count = data->loss_of_signal;
fc_stats->prim_seq_protocol_err_count = data->psp_error_counts;
fc_stats->invalid_tx_word_count = data->invalid_tx_words;
fc_stats->invalid_crc_count = data->invalid_crcs;
fc_stats->fcp_input_requests = data->input_requests;
fc_stats->fcp_output_requests = data->output_requests;
fc_stats->fcp_control_requests = data->control_requests;
fc_stats->fcp_input_megabytes = data->input_mb;
fc_stats->fcp_output_megabytes = data->output_mb;
}
static struct fc_host_statistics *zfcp_get_fc_host_stats(struct Scsi_Host *host)
{
struct zfcp_adapter *adapter;
struct fc_host_statistics *fc_stats;
struct fsf_qtcb_bottom_port *data;
int ret;
adapter = (struct zfcp_adapter *)host->hostdata[0];
fc_stats = zfcp_init_fc_host_stats(adapter);
if (!fc_stats)
return NULL;
data = kzalloc(sizeof(*data), GFP_KERNEL);
if (!data)
return NULL;
ret = zfcp_fsf_exchange_port_data_sync(adapter->qdio, data);
if (ret) {
kfree(data);
return NULL;
}
if (adapter->stats_reset &&
((jiffies/HZ - adapter->stats_reset) <
data->seconds_since_last_reset))
zfcp_adjust_fc_host_stats(fc_stats, data,
adapter->stats_reset_data);
else
zfcp_set_fc_host_stats(fc_stats, data);
kfree(data);
return fc_stats;
}
static void zfcp_reset_fc_host_stats(struct Scsi_Host *shost)
{
struct zfcp_adapter *adapter;
struct fsf_qtcb_bottom_port *data;
int ret;
adapter = (struct zfcp_adapter *)shost->hostdata[0];
data = kzalloc(sizeof(*data), GFP_KERNEL);
if (!data)
return;
ret = zfcp_fsf_exchange_port_data_sync(adapter->qdio, data);
if (ret)
kfree(data);
else {
adapter->stats_reset = jiffies/HZ;
kfree(adapter->stats_reset_data);
adapter->stats_reset_data = data; /* finally freed in
adapter_release */
}
}
static void zfcp_get_host_port_state(struct Scsi_Host *shost)
{
struct zfcp_adapter *adapter =
(struct zfcp_adapter *)shost->hostdata[0];
int status = atomic_read(&adapter->status);
if ((status & ZFCP_STATUS_COMMON_RUNNING) &&
!(status & ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED))
fc_host_port_state(shost) = FC_PORTSTATE_ONLINE;
else if (status & ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED)
fc_host_port_state(shost) = FC_PORTSTATE_LINKDOWN;
else if (status & ZFCP_STATUS_COMMON_ERP_FAILED)
fc_host_port_state(shost) = FC_PORTSTATE_ERROR;
else
fc_host_port_state(shost) = FC_PORTSTATE_UNKNOWN;
}
static void zfcp_set_rport_dev_loss_tmo(struct fc_rport *rport, u32 timeout)
{
rport->dev_loss_tmo = timeout;
}
/**
* zfcp_scsi_terminate_rport_io - Terminate all I/O on a rport
* @rport: The FC rport where to teminate I/O
*
* Abort all pending SCSI commands for a port by closing the
* port. Using a reopen avoids a conflict with a shutdown
* overwriting a reopen. The "forced" ensures that a disappeared port
* is not opened again as valid due to the cached plogi data in
* non-NPIV mode.
*/
static void zfcp_scsi_terminate_rport_io(struct fc_rport *rport)
{
struct zfcp_port *port;
struct Scsi_Host *shost = rport_to_shost(rport);
struct zfcp_adapter *adapter =
(struct zfcp_adapter *)shost->hostdata[0];
port = zfcp_get_port_by_wwpn(adapter, rport->port_name);
if (port) {
zfcp_erp_port_forced_reopen(port, 0, "sctrpi1");
put_device(&port->dev);
}
}
static void zfcp_scsi_rport_register(struct zfcp_port *port)
{
struct fc_rport_identifiers ids;
struct fc_rport *rport;
if (port->rport)
return;
ids.node_name = port->wwnn;
ids.port_name = port->wwpn;
ids.port_id = port->d_id;
ids.roles = FC_RPORT_ROLE_FCP_TARGET;
zfcp_dbf_rec_trig("scpaddy", port->adapter, port, NULL,
ZFCP_PSEUDO_ERP_ACTION_RPORT_ADD,
ZFCP_PSEUDO_ERP_ACTION_RPORT_ADD);
rport = fc_remote_port_add(port->adapter->scsi_host, 0, &ids);
if (!rport) {
dev_err(&port->adapter->ccw_device->dev,
"Registering port 0x%016Lx failed\n",
(unsigned long long)port->wwpn);
return;
}
rport->maxframe_size = port->maxframe_size;
rport->supported_classes = port->supported_classes;
port->rport = rport;
port->starget_id = rport->scsi_target_id;
zfcp_unit_queue_scsi_scan(port);
}
static void zfcp_scsi_rport_block(struct zfcp_port *port)
{
struct fc_rport *rport = port->rport;
if (rport) {
zfcp_dbf_rec_trig("scpdely", port->adapter, port, NULL,
ZFCP_PSEUDO_ERP_ACTION_RPORT_DEL,
ZFCP_PSEUDO_ERP_ACTION_RPORT_DEL);
fc_remote_port_delete(rport);
port->rport = NULL;
}
}
void zfcp_scsi_schedule_rport_register(struct zfcp_port *port)
{
get_device(&port->dev);
port->rport_task = RPORT_ADD;
if (!queue_work(port->adapter->work_queue, &port->rport_work))
put_device(&port->dev);
}
void zfcp_scsi_schedule_rport_block(struct zfcp_port *port)
{
get_device(&port->dev);
port->rport_task = RPORT_DEL;
if (port->rport && queue_work(port->adapter->work_queue,
&port->rport_work))
return;
put_device(&port->dev);
}
void zfcp_scsi_schedule_rports_block(struct zfcp_adapter *adapter)
{
unsigned long flags;
struct zfcp_port *port;
read_lock_irqsave(&adapter->port_list_lock, flags);
list_for_each_entry(port, &adapter->port_list, list)
zfcp_scsi_schedule_rport_block(port);
read_unlock_irqrestore(&adapter->port_list_lock, flags);
}
void zfcp_scsi_rport_work(struct work_struct *work)
{
struct zfcp_port *port = container_of(work, struct zfcp_port,
rport_work);
while (port->rport_task) {
if (port->rport_task == RPORT_ADD) {
port->rport_task = RPORT_NONE;
zfcp_scsi_rport_register(port);
} else {
port->rport_task = RPORT_NONE;
zfcp_scsi_rport_block(port);
}
}
put_device(&port->dev);
}
/**
* zfcp_scsi_set_prot - Configure DIF/DIX support in scsi_host
* @adapter: The adapter where to configure DIF/DIX for the SCSI host
*/
void zfcp_scsi_set_prot(struct zfcp_adapter *adapter)
{
unsigned int mask = 0;
unsigned int data_div;
struct Scsi_Host *shost = adapter->scsi_host;
data_div = atomic_read(&adapter->status) &
ZFCP_STATUS_ADAPTER_DATA_DIV_ENABLED;
if (enable_dif &&
adapter->adapter_features & FSF_FEATURE_DIF_PROT_TYPE1)
mask |= SHOST_DIF_TYPE1_PROTECTION;
if (enable_dif && data_div &&
adapter->adapter_features & FSF_FEATURE_DIX_PROT_TCPIP) {
mask |= SHOST_DIX_TYPE1_PROTECTION;
scsi_host_set_guard(shost, SHOST_DIX_GUARD_IP);
shost->sg_prot_tablesize = adapter->qdio->max_sbale_per_req / 2;
shost->sg_tablesize = adapter->qdio->max_sbale_per_req / 2;
shost->max_sectors = shost->sg_tablesize * 8;
}
scsi_host_set_prot(shost, mask);
}
/**
* zfcp_scsi_dif_sense_error - Report DIF/DIX error as driver sense error
* @scmd: The SCSI command to report the error for
* @ascq: The ASCQ to put in the sense buffer
*
* See the error handling in sd_done for the sense codes used here.
* Set DID_SOFT_ERROR to retry the request, if possible.
*/
void zfcp_scsi_dif_sense_error(struct scsi_cmnd *scmd, int ascq)
{
scsi_build_sense_buffer(1, scmd->sense_buffer,
ILLEGAL_REQUEST, 0x10, ascq);
set_driver_byte(scmd, DRIVER_SENSE);
scmd->result |= SAM_STAT_CHECK_CONDITION;
set_host_byte(scmd, DID_SOFT_ERROR);
}
struct fc_function_template zfcp_transport_functions = {
.show_starget_port_id = 1,
.show_starget_port_name = 1,
.show_starget_node_name = 1,
.show_rport_supported_classes = 1,
.show_rport_maxframe_size = 1,
.show_rport_dev_loss_tmo = 1,
.show_host_node_name = 1,
.show_host_port_name = 1,
.show_host_permanent_port_name = 1,
.show_host_supported_classes = 1,
.show_host_supported_fc4s = 1,
.show_host_supported_speeds = 1,
.show_host_maxframe_size = 1,
.show_host_serial_number = 1,
.get_fc_host_stats = zfcp_get_fc_host_stats,
.reset_fc_host_stats = zfcp_reset_fc_host_stats,
.set_rport_dev_loss_tmo = zfcp_set_rport_dev_loss_tmo,
.get_host_port_state = zfcp_get_host_port_state,
.terminate_rport_io = zfcp_scsi_terminate_rport_io,
.show_host_port_state = 1,
.show_host_active_fc4s = 1,
.bsg_request = zfcp_fc_exec_bsg_job,
.bsg_timeout = zfcp_fc_timeout_bsg_job,
/* no functions registered for following dynamic attributes but
directly set by LLDD */
.show_host_port_type = 1,
.show_host_symbolic_name = 1,
.show_host_speed = 1,
.show_host_port_id = 1,
.dd_bsg_size = sizeof(struct zfcp_fsf_ct_els),
};
Reference in New Issue View Git Blame Copy Permalink