100ceb66d5
Reported by Clifford and Craig for JMicron OHCI-1394 + SDHCI combo controllers: Often or even most of the time, the controller is initialized with the message "added OHCI v1.10 device as card 0, 4 IR + 0 IT contexts, quirks 0x10". With 0 isochronous transmit DMA contexts (IT contexts), applications like audio output are impossible. However, OHCI-1394 demands that at least 4 IT contexts are implemented by the link layer controller, and indeed JMicron JMB38x do implement four of them. Only their IsoXmitIntMask register is unreliable at early access. With my own JMB381 single function controller I found: - I can reproduce the problem with a lower probability than Craig's. - If I put a loop around the section which clears and reads IsoXmitIntMask, then either the first or the second attempt will return the correct initial mask of 0x0000000f. I never encountered a case of needing more than a second attempt. - Consequently, if I put a dummy reg_read(...IsoXmitIntMaskSet) before the first write, the subsequent read will return the correct result. - If I merely ignore a wrong read result and force the known real result, later isochronous transmit DMA usage works just fine. So let's just fix this chip bug up by the latter method. Tested with JMB381 on kernel 3.13 and 4.3. Since OHCI-1394 generally requires 4 IT contexts at a minium, this workaround is simply applied whenever the initial read of IsoXmitIntMask returns 0, regardless whether it's a JMicron chip or not. I never heard of this issue together with any other chip though. I am not 100% sure that this fix works on the OHCI-1394 part of JMB380 and JMB388 combo controllers exactly the same as on the JMB381 single- function controller, but so far I haven't had a chance to let an owner of a combo chip run a patched kernel. Strangely enough, IsoRecvIntMask is always reported correctly, even though it is probed right before IsoXmitIntMask. Reported-by: Clifford Dunn Reported-by: Craig Moore <craig.moore@qenos.com> Cc: stable@vger.kernel.org Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
3898 lines
106 KiB
C
3898 lines
106 KiB
C
/*
|
|
* Driver for OHCI 1394 controllers
|
|
*
|
|
* Copyright (C) 2003-2006 Kristian Hoegsberg <krh@bitplanet.net>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software Foundation,
|
|
* Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/bug.h>
|
|
#include <linux/compiler.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/firewire.h>
|
|
#include <linux/firewire-constants.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/list.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/pci_ids.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/string.h>
|
|
#include <linux/time.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <linux/workqueue.h>
|
|
|
|
#include <asm/byteorder.h>
|
|
#include <asm/page.h>
|
|
|
|
#ifdef CONFIG_PPC_PMAC
|
|
#include <asm/pmac_feature.h>
|
|
#endif
|
|
|
|
#include "core.h"
|
|
#include "ohci.h"
|
|
|
|
#define ohci_info(ohci, f, args...) dev_info(ohci->card.device, f, ##args)
|
|
#define ohci_notice(ohci, f, args...) dev_notice(ohci->card.device, f, ##args)
|
|
#define ohci_err(ohci, f, args...) dev_err(ohci->card.device, f, ##args)
|
|
|
|
#define DESCRIPTOR_OUTPUT_MORE 0
|
|
#define DESCRIPTOR_OUTPUT_LAST (1 << 12)
|
|
#define DESCRIPTOR_INPUT_MORE (2 << 12)
|
|
#define DESCRIPTOR_INPUT_LAST (3 << 12)
|
|
#define DESCRIPTOR_STATUS (1 << 11)
|
|
#define DESCRIPTOR_KEY_IMMEDIATE (2 << 8)
|
|
#define DESCRIPTOR_PING (1 << 7)
|
|
#define DESCRIPTOR_YY (1 << 6)
|
|
#define DESCRIPTOR_NO_IRQ (0 << 4)
|
|
#define DESCRIPTOR_IRQ_ERROR (1 << 4)
|
|
#define DESCRIPTOR_IRQ_ALWAYS (3 << 4)
|
|
#define DESCRIPTOR_BRANCH_ALWAYS (3 << 2)
|
|
#define DESCRIPTOR_WAIT (3 << 0)
|
|
|
|
#define DESCRIPTOR_CMD (0xf << 12)
|
|
|
|
struct descriptor {
|
|
__le16 req_count;
|
|
__le16 control;
|
|
__le32 data_address;
|
|
__le32 branch_address;
|
|
__le16 res_count;
|
|
__le16 transfer_status;
|
|
} __attribute__((aligned(16)));
|
|
|
|
#define CONTROL_SET(regs) (regs)
|
|
#define CONTROL_CLEAR(regs) ((regs) + 4)
|
|
#define COMMAND_PTR(regs) ((regs) + 12)
|
|
#define CONTEXT_MATCH(regs) ((regs) + 16)
|
|
|
|
#define AR_BUFFER_SIZE (32*1024)
|
|
#define AR_BUFFERS_MIN DIV_ROUND_UP(AR_BUFFER_SIZE, PAGE_SIZE)
|
|
/* we need at least two pages for proper list management */
|
|
#define AR_BUFFERS (AR_BUFFERS_MIN >= 2 ? AR_BUFFERS_MIN : 2)
|
|
|
|
#define MAX_ASYNC_PAYLOAD 4096
|
|
#define MAX_AR_PACKET_SIZE (16 + MAX_ASYNC_PAYLOAD + 4)
|
|
#define AR_WRAPAROUND_PAGES DIV_ROUND_UP(MAX_AR_PACKET_SIZE, PAGE_SIZE)
|
|
|
|
struct ar_context {
|
|
struct fw_ohci *ohci;
|
|
struct page *pages[AR_BUFFERS];
|
|
void *buffer;
|
|
struct descriptor *descriptors;
|
|
dma_addr_t descriptors_bus;
|
|
void *pointer;
|
|
unsigned int last_buffer_index;
|
|
u32 regs;
|
|
struct tasklet_struct tasklet;
|
|
};
|
|
|
|
struct context;
|
|
|
|
typedef int (*descriptor_callback_t)(struct context *ctx,
|
|
struct descriptor *d,
|
|
struct descriptor *last);
|
|
|
|
/*
|
|
* A buffer that contains a block of DMA-able coherent memory used for
|
|
* storing a portion of a DMA descriptor program.
|
|
*/
|
|
struct descriptor_buffer {
|
|
struct list_head list;
|
|
dma_addr_t buffer_bus;
|
|
size_t buffer_size;
|
|
size_t used;
|
|
struct descriptor buffer[0];
|
|
};
|
|
|
|
struct context {
|
|
struct fw_ohci *ohci;
|
|
u32 regs;
|
|
int total_allocation;
|
|
u32 current_bus;
|
|
bool running;
|
|
bool flushing;
|
|
|
|
/*
|
|
* List of page-sized buffers for storing DMA descriptors.
|
|
* Head of list contains buffers in use and tail of list contains
|
|
* free buffers.
|
|
*/
|
|
struct list_head buffer_list;
|
|
|
|
/*
|
|
* Pointer to a buffer inside buffer_list that contains the tail
|
|
* end of the current DMA program.
|
|
*/
|
|
struct descriptor_buffer *buffer_tail;
|
|
|
|
/*
|
|
* The descriptor containing the branch address of the first
|
|
* descriptor that has not yet been filled by the device.
|
|
*/
|
|
struct descriptor *last;
|
|
|
|
/*
|
|
* The last descriptor block in the DMA program. It contains the branch
|
|
* address that must be updated upon appending a new descriptor.
|
|
*/
|
|
struct descriptor *prev;
|
|
int prev_z;
|
|
|
|
descriptor_callback_t callback;
|
|
|
|
struct tasklet_struct tasklet;
|
|
};
|
|
|
|
#define IT_HEADER_SY(v) ((v) << 0)
|
|
#define IT_HEADER_TCODE(v) ((v) << 4)
|
|
#define IT_HEADER_CHANNEL(v) ((v) << 8)
|
|
#define IT_HEADER_TAG(v) ((v) << 14)
|
|
#define IT_HEADER_SPEED(v) ((v) << 16)
|
|
#define IT_HEADER_DATA_LENGTH(v) ((v) << 16)
|
|
|
|
struct iso_context {
|
|
struct fw_iso_context base;
|
|
struct context context;
|
|
void *header;
|
|
size_t header_length;
|
|
unsigned long flushing_completions;
|
|
u32 mc_buffer_bus;
|
|
u16 mc_completed;
|
|
u16 last_timestamp;
|
|
u8 sync;
|
|
u8 tags;
|
|
};
|
|
|
|
#define CONFIG_ROM_SIZE 1024
|
|
|
|
struct fw_ohci {
|
|
struct fw_card card;
|
|
|
|
__iomem char *registers;
|
|
int node_id;
|
|
int generation;
|
|
int request_generation; /* for timestamping incoming requests */
|
|
unsigned quirks;
|
|
unsigned int pri_req_max;
|
|
u32 bus_time;
|
|
bool bus_time_running;
|
|
bool is_root;
|
|
bool csr_state_setclear_abdicate;
|
|
int n_ir;
|
|
int n_it;
|
|
/*
|
|
* Spinlock for accessing fw_ohci data. Never call out of
|
|
* this driver with this lock held.
|
|
*/
|
|
spinlock_t lock;
|
|
|
|
struct mutex phy_reg_mutex;
|
|
|
|
void *misc_buffer;
|
|
dma_addr_t misc_buffer_bus;
|
|
|
|
struct ar_context ar_request_ctx;
|
|
struct ar_context ar_response_ctx;
|
|
struct context at_request_ctx;
|
|
struct context at_response_ctx;
|
|
|
|
u32 it_context_support;
|
|
u32 it_context_mask; /* unoccupied IT contexts */
|
|
struct iso_context *it_context_list;
|
|
u64 ir_context_channels; /* unoccupied channels */
|
|
u32 ir_context_support;
|
|
u32 ir_context_mask; /* unoccupied IR contexts */
|
|
struct iso_context *ir_context_list;
|
|
u64 mc_channels; /* channels in use by the multichannel IR context */
|
|
bool mc_allocated;
|
|
|
|
__be32 *config_rom;
|
|
dma_addr_t config_rom_bus;
|
|
__be32 *next_config_rom;
|
|
dma_addr_t next_config_rom_bus;
|
|
__be32 next_header;
|
|
|
|
__le32 *self_id;
|
|
dma_addr_t self_id_bus;
|
|
struct work_struct bus_reset_work;
|
|
|
|
u32 self_id_buffer[512];
|
|
};
|
|
|
|
static struct workqueue_struct *selfid_workqueue;
|
|
|
|
static inline struct fw_ohci *fw_ohci(struct fw_card *card)
|
|
{
|
|
return container_of(card, struct fw_ohci, card);
|
|
}
|
|
|
|
#define IT_CONTEXT_CYCLE_MATCH_ENABLE 0x80000000
|
|
#define IR_CONTEXT_BUFFER_FILL 0x80000000
|
|
#define IR_CONTEXT_ISOCH_HEADER 0x40000000
|
|
#define IR_CONTEXT_CYCLE_MATCH_ENABLE 0x20000000
|
|
#define IR_CONTEXT_MULTI_CHANNEL_MODE 0x10000000
|
|
#define IR_CONTEXT_DUAL_BUFFER_MODE 0x08000000
|
|
|
|
#define CONTEXT_RUN 0x8000
|
|
#define CONTEXT_WAKE 0x1000
|
|
#define CONTEXT_DEAD 0x0800
|
|
#define CONTEXT_ACTIVE 0x0400
|
|
|
|
#define OHCI1394_MAX_AT_REQ_RETRIES 0xf
|
|
#define OHCI1394_MAX_AT_RESP_RETRIES 0x2
|
|
#define OHCI1394_MAX_PHYS_RESP_RETRIES 0x8
|
|
|
|
#define OHCI1394_REGISTER_SIZE 0x800
|
|
#define OHCI1394_PCI_HCI_Control 0x40
|
|
#define SELF_ID_BUF_SIZE 0x800
|
|
#define OHCI_TCODE_PHY_PACKET 0x0e
|
|
#define OHCI_VERSION_1_1 0x010010
|
|
|
|
static char ohci_driver_name[] = KBUILD_MODNAME;
|
|
|
|
#define PCI_VENDOR_ID_PINNACLE_SYSTEMS 0x11bd
|
|
#define PCI_DEVICE_ID_AGERE_FW643 0x5901
|
|
#define PCI_DEVICE_ID_CREATIVE_SB1394 0x4001
|
|
#define PCI_DEVICE_ID_JMICRON_JMB38X_FW 0x2380
|
|
#define PCI_DEVICE_ID_TI_TSB12LV22 0x8009
|
|
#define PCI_DEVICE_ID_TI_TSB12LV26 0x8020
|
|
#define PCI_DEVICE_ID_TI_TSB82AA2 0x8025
|
|
#define PCI_DEVICE_ID_VIA_VT630X 0x3044
|
|
#define PCI_REV_ID_VIA_VT6306 0x46
|
|
#define PCI_DEVICE_ID_VIA_VT6315 0x3403
|
|
|
|
#define QUIRK_CYCLE_TIMER 0x1
|
|
#define QUIRK_RESET_PACKET 0x2
|
|
#define QUIRK_BE_HEADERS 0x4
|
|
#define QUIRK_NO_1394A 0x8
|
|
#define QUIRK_NO_MSI 0x10
|
|
#define QUIRK_TI_SLLZ059 0x20
|
|
#define QUIRK_IR_WAKE 0x40
|
|
|
|
/* In case of multiple matches in ohci_quirks[], only the first one is used. */
|
|
static const struct {
|
|
unsigned short vendor, device, revision, flags;
|
|
} ohci_quirks[] = {
|
|
{PCI_VENDOR_ID_AL, PCI_ANY_ID, PCI_ANY_ID,
|
|
QUIRK_CYCLE_TIMER},
|
|
|
|
{PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_UNI_N_FW, PCI_ANY_ID,
|
|
QUIRK_BE_HEADERS},
|
|
|
|
{PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_AGERE_FW643, 6,
|
|
QUIRK_NO_MSI},
|
|
|
|
{PCI_VENDOR_ID_CREATIVE, PCI_DEVICE_ID_CREATIVE_SB1394, PCI_ANY_ID,
|
|
QUIRK_RESET_PACKET},
|
|
|
|
{PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB38X_FW, PCI_ANY_ID,
|
|
QUIRK_NO_MSI},
|
|
|
|
{PCI_VENDOR_ID_NEC, PCI_ANY_ID, PCI_ANY_ID,
|
|
QUIRK_CYCLE_TIMER},
|
|
|
|
{PCI_VENDOR_ID_O2, PCI_ANY_ID, PCI_ANY_ID,
|
|
QUIRK_NO_MSI},
|
|
|
|
{PCI_VENDOR_ID_RICOH, PCI_ANY_ID, PCI_ANY_ID,
|
|
QUIRK_CYCLE_TIMER | QUIRK_NO_MSI},
|
|
|
|
{PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_TSB12LV22, PCI_ANY_ID,
|
|
QUIRK_CYCLE_TIMER | QUIRK_RESET_PACKET | QUIRK_NO_1394A},
|
|
|
|
{PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_TSB12LV26, PCI_ANY_ID,
|
|
QUIRK_RESET_PACKET | QUIRK_TI_SLLZ059},
|
|
|
|
{PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_TSB82AA2, PCI_ANY_ID,
|
|
QUIRK_RESET_PACKET | QUIRK_TI_SLLZ059},
|
|
|
|
{PCI_VENDOR_ID_TI, PCI_ANY_ID, PCI_ANY_ID,
|
|
QUIRK_RESET_PACKET},
|
|
|
|
{PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT630X, PCI_REV_ID_VIA_VT6306,
|
|
QUIRK_CYCLE_TIMER | QUIRK_IR_WAKE},
|
|
|
|
{PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT6315, 0,
|
|
QUIRK_CYCLE_TIMER /* FIXME: necessary? */ | QUIRK_NO_MSI},
|
|
|
|
{PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT6315, PCI_ANY_ID,
|
|
QUIRK_NO_MSI},
|
|
|
|
{PCI_VENDOR_ID_VIA, PCI_ANY_ID, PCI_ANY_ID,
|
|
QUIRK_CYCLE_TIMER | QUIRK_NO_MSI},
|
|
};
|
|
|
|
/* This overrides anything that was found in ohci_quirks[]. */
|
|
static int param_quirks;
|
|
module_param_named(quirks, param_quirks, int, 0644);
|
|
MODULE_PARM_DESC(quirks, "Chip quirks (default = 0"
|
|
", nonatomic cycle timer = " __stringify(QUIRK_CYCLE_TIMER)
|
|
", reset packet generation = " __stringify(QUIRK_RESET_PACKET)
|
|
", AR/selfID endianness = " __stringify(QUIRK_BE_HEADERS)
|
|
", no 1394a enhancements = " __stringify(QUIRK_NO_1394A)
|
|
", disable MSI = " __stringify(QUIRK_NO_MSI)
|
|
", TI SLLZ059 erratum = " __stringify(QUIRK_TI_SLLZ059)
|
|
", IR wake unreliable = " __stringify(QUIRK_IR_WAKE)
|
|
")");
|
|
|
|
#define OHCI_PARAM_DEBUG_AT_AR 1
|
|
#define OHCI_PARAM_DEBUG_SELFIDS 2
|
|
#define OHCI_PARAM_DEBUG_IRQS 4
|
|
#define OHCI_PARAM_DEBUG_BUSRESETS 8 /* only effective before chip init */
|
|
|
|
static int param_debug;
|
|
module_param_named(debug, param_debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "Verbose logging (default = 0"
|
|
", AT/AR events = " __stringify(OHCI_PARAM_DEBUG_AT_AR)
|
|
", self-IDs = " __stringify(OHCI_PARAM_DEBUG_SELFIDS)
|
|
", IRQs = " __stringify(OHCI_PARAM_DEBUG_IRQS)
|
|
", busReset events = " __stringify(OHCI_PARAM_DEBUG_BUSRESETS)
|
|
", or a combination, or all = -1)");
|
|
|
|
static bool param_remote_dma;
|
|
module_param_named(remote_dma, param_remote_dma, bool, 0444);
|
|
MODULE_PARM_DESC(remote_dma, "Enable unfiltered remote DMA (default = N)");
|
|
|
|
static void log_irqs(struct fw_ohci *ohci, u32 evt)
|
|
{
|
|
if (likely(!(param_debug &
|
|
(OHCI_PARAM_DEBUG_IRQS | OHCI_PARAM_DEBUG_BUSRESETS))))
|
|
return;
|
|
|
|
if (!(param_debug & OHCI_PARAM_DEBUG_IRQS) &&
|
|
!(evt & OHCI1394_busReset))
|
|
return;
|
|
|
|
ohci_notice(ohci, "IRQ %08x%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n", evt,
|
|
evt & OHCI1394_selfIDComplete ? " selfID" : "",
|
|
evt & OHCI1394_RQPkt ? " AR_req" : "",
|
|
evt & OHCI1394_RSPkt ? " AR_resp" : "",
|
|
evt & OHCI1394_reqTxComplete ? " AT_req" : "",
|
|
evt & OHCI1394_respTxComplete ? " AT_resp" : "",
|
|
evt & OHCI1394_isochRx ? " IR" : "",
|
|
evt & OHCI1394_isochTx ? " IT" : "",
|
|
evt & OHCI1394_postedWriteErr ? " postedWriteErr" : "",
|
|
evt & OHCI1394_cycleTooLong ? " cycleTooLong" : "",
|
|
evt & OHCI1394_cycle64Seconds ? " cycle64Seconds" : "",
|
|
evt & OHCI1394_cycleInconsistent ? " cycleInconsistent" : "",
|
|
evt & OHCI1394_regAccessFail ? " regAccessFail" : "",
|
|
evt & OHCI1394_unrecoverableError ? " unrecoverableError" : "",
|
|
evt & OHCI1394_busReset ? " busReset" : "",
|
|
evt & ~(OHCI1394_selfIDComplete | OHCI1394_RQPkt |
|
|
OHCI1394_RSPkt | OHCI1394_reqTxComplete |
|
|
OHCI1394_respTxComplete | OHCI1394_isochRx |
|
|
OHCI1394_isochTx | OHCI1394_postedWriteErr |
|
|
OHCI1394_cycleTooLong | OHCI1394_cycle64Seconds |
|
|
OHCI1394_cycleInconsistent |
|
|
OHCI1394_regAccessFail | OHCI1394_busReset)
|
|
? " ?" : "");
|
|
}
|
|
|
|
static const char *speed[] = {
|
|
[0] = "S100", [1] = "S200", [2] = "S400", [3] = "beta",
|
|
};
|
|
static const char *power[] = {
|
|
[0] = "+0W", [1] = "+15W", [2] = "+30W", [3] = "+45W",
|
|
[4] = "-3W", [5] = " ?W", [6] = "-3..-6W", [7] = "-3..-10W",
|
|
};
|
|
static const char port[] = { '.', '-', 'p', 'c', };
|
|
|
|
static char _p(u32 *s, int shift)
|
|
{
|
|
return port[*s >> shift & 3];
|
|
}
|
|
|
|
static void log_selfids(struct fw_ohci *ohci, int generation, int self_id_count)
|
|
{
|
|
u32 *s;
|
|
|
|
if (likely(!(param_debug & OHCI_PARAM_DEBUG_SELFIDS)))
|
|
return;
|
|
|
|
ohci_notice(ohci, "%d selfIDs, generation %d, local node ID %04x\n",
|
|
self_id_count, generation, ohci->node_id);
|
|
|
|
for (s = ohci->self_id_buffer; self_id_count--; ++s)
|
|
if ((*s & 1 << 23) == 0)
|
|
ohci_notice(ohci,
|
|
"selfID 0: %08x, phy %d [%c%c%c] %s gc=%d %s %s%s%s\n",
|
|
*s, *s >> 24 & 63, _p(s, 6), _p(s, 4), _p(s, 2),
|
|
speed[*s >> 14 & 3], *s >> 16 & 63,
|
|
power[*s >> 8 & 7], *s >> 22 & 1 ? "L" : "",
|
|
*s >> 11 & 1 ? "c" : "", *s & 2 ? "i" : "");
|
|
else
|
|
ohci_notice(ohci,
|
|
"selfID n: %08x, phy %d [%c%c%c%c%c%c%c%c]\n",
|
|
*s, *s >> 24 & 63,
|
|
_p(s, 16), _p(s, 14), _p(s, 12), _p(s, 10),
|
|
_p(s, 8), _p(s, 6), _p(s, 4), _p(s, 2));
|
|
}
|
|
|
|
static const char *evts[] = {
|
|
[0x00] = "evt_no_status", [0x01] = "-reserved-",
|
|
[0x02] = "evt_long_packet", [0x03] = "evt_missing_ack",
|
|
[0x04] = "evt_underrun", [0x05] = "evt_overrun",
|
|
[0x06] = "evt_descriptor_read", [0x07] = "evt_data_read",
|
|
[0x08] = "evt_data_write", [0x09] = "evt_bus_reset",
|
|
[0x0a] = "evt_timeout", [0x0b] = "evt_tcode_err",
|
|
[0x0c] = "-reserved-", [0x0d] = "-reserved-",
|
|
[0x0e] = "evt_unknown", [0x0f] = "evt_flushed",
|
|
[0x10] = "-reserved-", [0x11] = "ack_complete",
|
|
[0x12] = "ack_pending ", [0x13] = "-reserved-",
|
|
[0x14] = "ack_busy_X", [0x15] = "ack_busy_A",
|
|
[0x16] = "ack_busy_B", [0x17] = "-reserved-",
|
|
[0x18] = "-reserved-", [0x19] = "-reserved-",
|
|
[0x1a] = "-reserved-", [0x1b] = "ack_tardy",
|
|
[0x1c] = "-reserved-", [0x1d] = "ack_data_error",
|
|
[0x1e] = "ack_type_error", [0x1f] = "-reserved-",
|
|
[0x20] = "pending/cancelled",
|
|
};
|
|
static const char *tcodes[] = {
|
|
[0x0] = "QW req", [0x1] = "BW req",
|
|
[0x2] = "W resp", [0x3] = "-reserved-",
|
|
[0x4] = "QR req", [0x5] = "BR req",
|
|
[0x6] = "QR resp", [0x7] = "BR resp",
|
|
[0x8] = "cycle start", [0x9] = "Lk req",
|
|
[0xa] = "async stream packet", [0xb] = "Lk resp",
|
|
[0xc] = "-reserved-", [0xd] = "-reserved-",
|
|
[0xe] = "link internal", [0xf] = "-reserved-",
|
|
};
|
|
|
|
static void log_ar_at_event(struct fw_ohci *ohci,
|
|
char dir, int speed, u32 *header, int evt)
|
|
{
|
|
int tcode = header[0] >> 4 & 0xf;
|
|
char specific[12];
|
|
|
|
if (likely(!(param_debug & OHCI_PARAM_DEBUG_AT_AR)))
|
|
return;
|
|
|
|
if (unlikely(evt >= ARRAY_SIZE(evts)))
|
|
evt = 0x1f;
|
|
|
|
if (evt == OHCI1394_evt_bus_reset) {
|
|
ohci_notice(ohci, "A%c evt_bus_reset, generation %d\n",
|
|
dir, (header[2] >> 16) & 0xff);
|
|
return;
|
|
}
|
|
|
|
switch (tcode) {
|
|
case 0x0: case 0x6: case 0x8:
|
|
snprintf(specific, sizeof(specific), " = %08x",
|
|
be32_to_cpu((__force __be32)header[3]));
|
|
break;
|
|
case 0x1: case 0x5: case 0x7: case 0x9: case 0xb:
|
|
snprintf(specific, sizeof(specific), " %x,%x",
|
|
header[3] >> 16, header[3] & 0xffff);
|
|
break;
|
|
default:
|
|
specific[0] = '\0';
|
|
}
|
|
|
|
switch (tcode) {
|
|
case 0xa:
|
|
ohci_notice(ohci, "A%c %s, %s\n",
|
|
dir, evts[evt], tcodes[tcode]);
|
|
break;
|
|
case 0xe:
|
|
ohci_notice(ohci, "A%c %s, PHY %08x %08x\n",
|
|
dir, evts[evt], header[1], header[2]);
|
|
break;
|
|
case 0x0: case 0x1: case 0x4: case 0x5: case 0x9:
|
|
ohci_notice(ohci,
|
|
"A%c spd %x tl %02x, %04x -> %04x, %s, %s, %04x%08x%s\n",
|
|
dir, speed, header[0] >> 10 & 0x3f,
|
|
header[1] >> 16, header[0] >> 16, evts[evt],
|
|
tcodes[tcode], header[1] & 0xffff, header[2], specific);
|
|
break;
|
|
default:
|
|
ohci_notice(ohci,
|
|
"A%c spd %x tl %02x, %04x -> %04x, %s, %s%s\n",
|
|
dir, speed, header[0] >> 10 & 0x3f,
|
|
header[1] >> 16, header[0] >> 16, evts[evt],
|
|
tcodes[tcode], specific);
|
|
}
|
|
}
|
|
|
|
static inline void reg_write(const struct fw_ohci *ohci, int offset, u32 data)
|
|
{
|
|
writel(data, ohci->registers + offset);
|
|
}
|
|
|
|
static inline u32 reg_read(const struct fw_ohci *ohci, int offset)
|
|
{
|
|
return readl(ohci->registers + offset);
|
|
}
|
|
|
|
static inline void flush_writes(const struct fw_ohci *ohci)
|
|
{
|
|
/* Do a dummy read to flush writes. */
|
|
reg_read(ohci, OHCI1394_Version);
|
|
}
|
|
|
|
/*
|
|
* Beware! read_phy_reg(), write_phy_reg(), update_phy_reg(), and
|
|
* read_paged_phy_reg() require the caller to hold ohci->phy_reg_mutex.
|
|
* In other words, only use ohci_read_phy_reg() and ohci_update_phy_reg()
|
|
* directly. Exceptions are intrinsically serialized contexts like pci_probe.
|
|
*/
|
|
static int read_phy_reg(struct fw_ohci *ohci, int addr)
|
|
{
|
|
u32 val;
|
|
int i;
|
|
|
|
reg_write(ohci, OHCI1394_PhyControl, OHCI1394_PhyControl_Read(addr));
|
|
for (i = 0; i < 3 + 100; i++) {
|
|
val = reg_read(ohci, OHCI1394_PhyControl);
|
|
if (!~val)
|
|
return -ENODEV; /* Card was ejected. */
|
|
|
|
if (val & OHCI1394_PhyControl_ReadDone)
|
|
return OHCI1394_PhyControl_ReadData(val);
|
|
|
|
/*
|
|
* Try a few times without waiting. Sleeping is necessary
|
|
* only when the link/PHY interface is busy.
|
|
*/
|
|
if (i >= 3)
|
|
msleep(1);
|
|
}
|
|
ohci_err(ohci, "failed to read phy reg %d\n", addr);
|
|
dump_stack();
|
|
|
|
return -EBUSY;
|
|
}
|
|
|
|
static int write_phy_reg(const struct fw_ohci *ohci, int addr, u32 val)
|
|
{
|
|
int i;
|
|
|
|
reg_write(ohci, OHCI1394_PhyControl,
|
|
OHCI1394_PhyControl_Write(addr, val));
|
|
for (i = 0; i < 3 + 100; i++) {
|
|
val = reg_read(ohci, OHCI1394_PhyControl);
|
|
if (!~val)
|
|
return -ENODEV; /* Card was ejected. */
|
|
|
|
if (!(val & OHCI1394_PhyControl_WritePending))
|
|
return 0;
|
|
|
|
if (i >= 3)
|
|
msleep(1);
|
|
}
|
|
ohci_err(ohci, "failed to write phy reg %d, val %u\n", addr, val);
|
|
dump_stack();
|
|
|
|
return -EBUSY;
|
|
}
|
|
|
|
static int update_phy_reg(struct fw_ohci *ohci, int addr,
|
|
int clear_bits, int set_bits)
|
|
{
|
|
int ret = read_phy_reg(ohci, addr);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/*
|
|
* The interrupt status bits are cleared by writing a one bit.
|
|
* Avoid clearing them unless explicitly requested in set_bits.
|
|
*/
|
|
if (addr == 5)
|
|
clear_bits |= PHY_INT_STATUS_BITS;
|
|
|
|
return write_phy_reg(ohci, addr, (ret & ~clear_bits) | set_bits);
|
|
}
|
|
|
|
static int read_paged_phy_reg(struct fw_ohci *ohci, int page, int addr)
|
|
{
|
|
int ret;
|
|
|
|
ret = update_phy_reg(ohci, 7, PHY_PAGE_SELECT, page << 5);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return read_phy_reg(ohci, addr);
|
|
}
|
|
|
|
static int ohci_read_phy_reg(struct fw_card *card, int addr)
|
|
{
|
|
struct fw_ohci *ohci = fw_ohci(card);
|
|
int ret;
|
|
|
|
mutex_lock(&ohci->phy_reg_mutex);
|
|
ret = read_phy_reg(ohci, addr);
|
|
mutex_unlock(&ohci->phy_reg_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ohci_update_phy_reg(struct fw_card *card, int addr,
|
|
int clear_bits, int set_bits)
|
|
{
|
|
struct fw_ohci *ohci = fw_ohci(card);
|
|
int ret;
|
|
|
|
mutex_lock(&ohci->phy_reg_mutex);
|
|
ret = update_phy_reg(ohci, addr, clear_bits, set_bits);
|
|
mutex_unlock(&ohci->phy_reg_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static inline dma_addr_t ar_buffer_bus(struct ar_context *ctx, unsigned int i)
|
|
{
|
|
return page_private(ctx->pages[i]);
|
|
}
|
|
|
|
static void ar_context_link_page(struct ar_context *ctx, unsigned int index)
|
|
{
|
|
struct descriptor *d;
|
|
|
|
d = &ctx->descriptors[index];
|
|
d->branch_address &= cpu_to_le32(~0xf);
|
|
d->res_count = cpu_to_le16(PAGE_SIZE);
|
|
d->transfer_status = 0;
|
|
|
|
wmb(); /* finish init of new descriptors before branch_address update */
|
|
d = &ctx->descriptors[ctx->last_buffer_index];
|
|
d->branch_address |= cpu_to_le32(1);
|
|
|
|
ctx->last_buffer_index = index;
|
|
|
|
reg_write(ctx->ohci, CONTROL_SET(ctx->regs), CONTEXT_WAKE);
|
|
}
|
|
|
|
static void ar_context_release(struct ar_context *ctx)
|
|
{
|
|
unsigned int i;
|
|
|
|
vunmap(ctx->buffer);
|
|
|
|
for (i = 0; i < AR_BUFFERS; i++)
|
|
if (ctx->pages[i]) {
|
|
dma_unmap_page(ctx->ohci->card.device,
|
|
ar_buffer_bus(ctx, i),
|
|
PAGE_SIZE, DMA_FROM_DEVICE);
|
|
__free_page(ctx->pages[i]);
|
|
}
|
|
}
|
|
|
|
static void ar_context_abort(struct ar_context *ctx, const char *error_msg)
|
|
{
|
|
struct fw_ohci *ohci = ctx->ohci;
|
|
|
|
if (reg_read(ohci, CONTROL_CLEAR(ctx->regs)) & CONTEXT_RUN) {
|
|
reg_write(ohci, CONTROL_CLEAR(ctx->regs), CONTEXT_RUN);
|
|
flush_writes(ohci);
|
|
|
|
ohci_err(ohci, "AR error: %s; DMA stopped\n", error_msg);
|
|
}
|
|
/* FIXME: restart? */
|
|
}
|
|
|
|
static inline unsigned int ar_next_buffer_index(unsigned int index)
|
|
{
|
|
return (index + 1) % AR_BUFFERS;
|
|
}
|
|
|
|
static inline unsigned int ar_first_buffer_index(struct ar_context *ctx)
|
|
{
|
|
return ar_next_buffer_index(ctx->last_buffer_index);
|
|
}
|
|
|
|
/*
|
|
* We search for the buffer that contains the last AR packet DMA data written
|
|
* by the controller.
|
|
*/
|
|
static unsigned int ar_search_last_active_buffer(struct ar_context *ctx,
|
|
unsigned int *buffer_offset)
|
|
{
|
|
unsigned int i, next_i, last = ctx->last_buffer_index;
|
|
__le16 res_count, next_res_count;
|
|
|
|
i = ar_first_buffer_index(ctx);
|
|
res_count = ACCESS_ONCE(ctx->descriptors[i].res_count);
|
|
|
|
/* A buffer that is not yet completely filled must be the last one. */
|
|
while (i != last && res_count == 0) {
|
|
|
|
/* Peek at the next descriptor. */
|
|
next_i = ar_next_buffer_index(i);
|
|
rmb(); /* read descriptors in order */
|
|
next_res_count = ACCESS_ONCE(
|
|
ctx->descriptors[next_i].res_count);
|
|
/*
|
|
* If the next descriptor is still empty, we must stop at this
|
|
* descriptor.
|
|
*/
|
|
if (next_res_count == cpu_to_le16(PAGE_SIZE)) {
|
|
/*
|
|
* The exception is when the DMA data for one packet is
|
|
* split over three buffers; in this case, the middle
|
|
* buffer's descriptor might be never updated by the
|
|
* controller and look still empty, and we have to peek
|
|
* at the third one.
|
|
*/
|
|
if (MAX_AR_PACKET_SIZE > PAGE_SIZE && i != last) {
|
|
next_i = ar_next_buffer_index(next_i);
|
|
rmb();
|
|
next_res_count = ACCESS_ONCE(
|
|
ctx->descriptors[next_i].res_count);
|
|
if (next_res_count != cpu_to_le16(PAGE_SIZE))
|
|
goto next_buffer_is_active;
|
|
}
|
|
|
|
break;
|
|
}
|
|
|
|
next_buffer_is_active:
|
|
i = next_i;
|
|
res_count = next_res_count;
|
|
}
|
|
|
|
rmb(); /* read res_count before the DMA data */
|
|
|
|
*buffer_offset = PAGE_SIZE - le16_to_cpu(res_count);
|
|
if (*buffer_offset > PAGE_SIZE) {
|
|
*buffer_offset = 0;
|
|
ar_context_abort(ctx, "corrupted descriptor");
|
|
}
|
|
|
|
return i;
|
|
}
|
|
|
|
static void ar_sync_buffers_for_cpu(struct ar_context *ctx,
|
|
unsigned int end_buffer_index,
|
|
unsigned int end_buffer_offset)
|
|
{
|
|
unsigned int i;
|
|
|
|
i = ar_first_buffer_index(ctx);
|
|
while (i != end_buffer_index) {
|
|
dma_sync_single_for_cpu(ctx->ohci->card.device,
|
|
ar_buffer_bus(ctx, i),
|
|
PAGE_SIZE, DMA_FROM_DEVICE);
|
|
i = ar_next_buffer_index(i);
|
|
}
|
|
if (end_buffer_offset > 0)
|
|
dma_sync_single_for_cpu(ctx->ohci->card.device,
|
|
ar_buffer_bus(ctx, i),
|
|
end_buffer_offset, DMA_FROM_DEVICE);
|
|
}
|
|
|
|
#if defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32)
|
|
#define cond_le32_to_cpu(v) \
|
|
(ohci->quirks & QUIRK_BE_HEADERS ? (__force __u32)(v) : le32_to_cpu(v))
|
|
#else
|
|
#define cond_le32_to_cpu(v) le32_to_cpu(v)
|
|
#endif
|
|
|
|
static __le32 *handle_ar_packet(struct ar_context *ctx, __le32 *buffer)
|
|
{
|
|
struct fw_ohci *ohci = ctx->ohci;
|
|
struct fw_packet p;
|
|
u32 status, length, tcode;
|
|
int evt;
|
|
|
|
p.header[0] = cond_le32_to_cpu(buffer[0]);
|
|
p.header[1] = cond_le32_to_cpu(buffer[1]);
|
|
p.header[2] = cond_le32_to_cpu(buffer[2]);
|
|
|
|
tcode = (p.header[0] >> 4) & 0x0f;
|
|
switch (tcode) {
|
|
case TCODE_WRITE_QUADLET_REQUEST:
|
|
case TCODE_READ_QUADLET_RESPONSE:
|
|
p.header[3] = (__force __u32) buffer[3];
|
|
p.header_length = 16;
|
|
p.payload_length = 0;
|
|
break;
|
|
|
|
case TCODE_READ_BLOCK_REQUEST :
|
|
p.header[3] = cond_le32_to_cpu(buffer[3]);
|
|
p.header_length = 16;
|
|
p.payload_length = 0;
|
|
break;
|
|
|
|
case TCODE_WRITE_BLOCK_REQUEST:
|
|
case TCODE_READ_BLOCK_RESPONSE:
|
|
case TCODE_LOCK_REQUEST:
|
|
case TCODE_LOCK_RESPONSE:
|
|
p.header[3] = cond_le32_to_cpu(buffer[3]);
|
|
p.header_length = 16;
|
|
p.payload_length = p.header[3] >> 16;
|
|
if (p.payload_length > MAX_ASYNC_PAYLOAD) {
|
|
ar_context_abort(ctx, "invalid packet length");
|
|
return NULL;
|
|
}
|
|
break;
|
|
|
|
case TCODE_WRITE_RESPONSE:
|
|
case TCODE_READ_QUADLET_REQUEST:
|
|
case OHCI_TCODE_PHY_PACKET:
|
|
p.header_length = 12;
|
|
p.payload_length = 0;
|
|
break;
|
|
|
|
default:
|
|
ar_context_abort(ctx, "invalid tcode");
|
|
return NULL;
|
|
}
|
|
|
|
p.payload = (void *) buffer + p.header_length;
|
|
|
|
/* FIXME: What to do about evt_* errors? */
|
|
length = (p.header_length + p.payload_length + 3) / 4;
|
|
status = cond_le32_to_cpu(buffer[length]);
|
|
evt = (status >> 16) & 0x1f;
|
|
|
|
p.ack = evt - 16;
|
|
p.speed = (status >> 21) & 0x7;
|
|
p.timestamp = status & 0xffff;
|
|
p.generation = ohci->request_generation;
|
|
|
|
log_ar_at_event(ohci, 'R', p.speed, p.header, evt);
|
|
|
|
/*
|
|
* Several controllers, notably from NEC and VIA, forget to
|
|
* write ack_complete status at PHY packet reception.
|
|
*/
|
|
if (evt == OHCI1394_evt_no_status &&
|
|
(p.header[0] & 0xff) == (OHCI1394_phy_tcode << 4))
|
|
p.ack = ACK_COMPLETE;
|
|
|
|
/*
|
|
* The OHCI bus reset handler synthesizes a PHY packet with
|
|
* the new generation number when a bus reset happens (see
|
|
* section 8.4.2.3). This helps us determine when a request
|
|
* was received and make sure we send the response in the same
|
|
* generation. We only need this for requests; for responses
|
|
* we use the unique tlabel for finding the matching
|
|
* request.
|
|
*
|
|
* Alas some chips sometimes emit bus reset packets with a
|
|
* wrong generation. We set the correct generation for these
|
|
* at a slightly incorrect time (in bus_reset_work).
|
|
*/
|
|
if (evt == OHCI1394_evt_bus_reset) {
|
|
if (!(ohci->quirks & QUIRK_RESET_PACKET))
|
|
ohci->request_generation = (p.header[2] >> 16) & 0xff;
|
|
} else if (ctx == &ohci->ar_request_ctx) {
|
|
fw_core_handle_request(&ohci->card, &p);
|
|
} else {
|
|
fw_core_handle_response(&ohci->card, &p);
|
|
}
|
|
|
|
return buffer + length + 1;
|
|
}
|
|
|
|
static void *handle_ar_packets(struct ar_context *ctx, void *p, void *end)
|
|
{
|
|
void *next;
|
|
|
|
while (p < end) {
|
|
next = handle_ar_packet(ctx, p);
|
|
if (!next)
|
|
return p;
|
|
p = next;
|
|
}
|
|
|
|
return p;
|
|
}
|
|
|
|
static void ar_recycle_buffers(struct ar_context *ctx, unsigned int end_buffer)
|
|
{
|
|
unsigned int i;
|
|
|
|
i = ar_first_buffer_index(ctx);
|
|
while (i != end_buffer) {
|
|
dma_sync_single_for_device(ctx->ohci->card.device,
|
|
ar_buffer_bus(ctx, i),
|
|
PAGE_SIZE, DMA_FROM_DEVICE);
|
|
ar_context_link_page(ctx, i);
|
|
i = ar_next_buffer_index(i);
|
|
}
|
|
}
|
|
|
|
static void ar_context_tasklet(unsigned long data)
|
|
{
|
|
struct ar_context *ctx = (struct ar_context *)data;
|
|
unsigned int end_buffer_index, end_buffer_offset;
|
|
void *p, *end;
|
|
|
|
p = ctx->pointer;
|
|
if (!p)
|
|
return;
|
|
|
|
end_buffer_index = ar_search_last_active_buffer(ctx,
|
|
&end_buffer_offset);
|
|
ar_sync_buffers_for_cpu(ctx, end_buffer_index, end_buffer_offset);
|
|
end = ctx->buffer + end_buffer_index * PAGE_SIZE + end_buffer_offset;
|
|
|
|
if (end_buffer_index < ar_first_buffer_index(ctx)) {
|
|
/*
|
|
* The filled part of the overall buffer wraps around; handle
|
|
* all packets up to the buffer end here. If the last packet
|
|
* wraps around, its tail will be visible after the buffer end
|
|
* because the buffer start pages are mapped there again.
|
|
*/
|
|
void *buffer_end = ctx->buffer + AR_BUFFERS * PAGE_SIZE;
|
|
p = handle_ar_packets(ctx, p, buffer_end);
|
|
if (p < buffer_end)
|
|
goto error;
|
|
/* adjust p to point back into the actual buffer */
|
|
p -= AR_BUFFERS * PAGE_SIZE;
|
|
}
|
|
|
|
p = handle_ar_packets(ctx, p, end);
|
|
if (p != end) {
|
|
if (p > end)
|
|
ar_context_abort(ctx, "inconsistent descriptor");
|
|
goto error;
|
|
}
|
|
|
|
ctx->pointer = p;
|
|
ar_recycle_buffers(ctx, end_buffer_index);
|
|
|
|
return;
|
|
|
|
error:
|
|
ctx->pointer = NULL;
|
|
}
|
|
|
|
static int ar_context_init(struct ar_context *ctx, struct fw_ohci *ohci,
|
|
unsigned int descriptors_offset, u32 regs)
|
|
{
|
|
unsigned int i;
|
|
dma_addr_t dma_addr;
|
|
struct page *pages[AR_BUFFERS + AR_WRAPAROUND_PAGES];
|
|
struct descriptor *d;
|
|
|
|
ctx->regs = regs;
|
|
ctx->ohci = ohci;
|
|
tasklet_init(&ctx->tasklet, ar_context_tasklet, (unsigned long)ctx);
|
|
|
|
for (i = 0; i < AR_BUFFERS; i++) {
|
|
ctx->pages[i] = alloc_page(GFP_KERNEL | GFP_DMA32);
|
|
if (!ctx->pages[i])
|
|
goto out_of_memory;
|
|
dma_addr = dma_map_page(ohci->card.device, ctx->pages[i],
|
|
0, PAGE_SIZE, DMA_FROM_DEVICE);
|
|
if (dma_mapping_error(ohci->card.device, dma_addr)) {
|
|
__free_page(ctx->pages[i]);
|
|
ctx->pages[i] = NULL;
|
|
goto out_of_memory;
|
|
}
|
|
set_page_private(ctx->pages[i], dma_addr);
|
|
}
|
|
|
|
for (i = 0; i < AR_BUFFERS; i++)
|
|
pages[i] = ctx->pages[i];
|
|
for (i = 0; i < AR_WRAPAROUND_PAGES; i++)
|
|
pages[AR_BUFFERS + i] = ctx->pages[i];
|
|
ctx->buffer = vmap(pages, ARRAY_SIZE(pages), VM_MAP, PAGE_KERNEL);
|
|
if (!ctx->buffer)
|
|
goto out_of_memory;
|
|
|
|
ctx->descriptors = ohci->misc_buffer + descriptors_offset;
|
|
ctx->descriptors_bus = ohci->misc_buffer_bus + descriptors_offset;
|
|
|
|
for (i = 0; i < AR_BUFFERS; i++) {
|
|
d = &ctx->descriptors[i];
|
|
d->req_count = cpu_to_le16(PAGE_SIZE);
|
|
d->control = cpu_to_le16(DESCRIPTOR_INPUT_MORE |
|
|
DESCRIPTOR_STATUS |
|
|
DESCRIPTOR_BRANCH_ALWAYS);
|
|
d->data_address = cpu_to_le32(ar_buffer_bus(ctx, i));
|
|
d->branch_address = cpu_to_le32(ctx->descriptors_bus +
|
|
ar_next_buffer_index(i) * sizeof(struct descriptor));
|
|
}
|
|
|
|
return 0;
|
|
|
|
out_of_memory:
|
|
ar_context_release(ctx);
|
|
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static void ar_context_run(struct ar_context *ctx)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < AR_BUFFERS; i++)
|
|
ar_context_link_page(ctx, i);
|
|
|
|
ctx->pointer = ctx->buffer;
|
|
|
|
reg_write(ctx->ohci, COMMAND_PTR(ctx->regs), ctx->descriptors_bus | 1);
|
|
reg_write(ctx->ohci, CONTROL_SET(ctx->regs), CONTEXT_RUN);
|
|
}
|
|
|
|
static struct descriptor *find_branch_descriptor(struct descriptor *d, int z)
|
|
{
|
|
__le16 branch;
|
|
|
|
branch = d->control & cpu_to_le16(DESCRIPTOR_BRANCH_ALWAYS);
|
|
|
|
/* figure out which descriptor the branch address goes in */
|
|
if (z == 2 && branch == cpu_to_le16(DESCRIPTOR_BRANCH_ALWAYS))
|
|
return d;
|
|
else
|
|
return d + z - 1;
|
|
}
|
|
|
|
static void context_tasklet(unsigned long data)
|
|
{
|
|
struct context *ctx = (struct context *) data;
|
|
struct descriptor *d, *last;
|
|
u32 address;
|
|
int z;
|
|
struct descriptor_buffer *desc;
|
|
|
|
desc = list_entry(ctx->buffer_list.next,
|
|
struct descriptor_buffer, list);
|
|
last = ctx->last;
|
|
while (last->branch_address != 0) {
|
|
struct descriptor_buffer *old_desc = desc;
|
|
address = le32_to_cpu(last->branch_address);
|
|
z = address & 0xf;
|
|
address &= ~0xf;
|
|
ctx->current_bus = address;
|
|
|
|
/* If the branch address points to a buffer outside of the
|
|
* current buffer, advance to the next buffer. */
|
|
if (address < desc->buffer_bus ||
|
|
address >= desc->buffer_bus + desc->used)
|
|
desc = list_entry(desc->list.next,
|
|
struct descriptor_buffer, list);
|
|
d = desc->buffer + (address - desc->buffer_bus) / sizeof(*d);
|
|
last = find_branch_descriptor(d, z);
|
|
|
|
if (!ctx->callback(ctx, d, last))
|
|
break;
|
|
|
|
if (old_desc != desc) {
|
|
/* If we've advanced to the next buffer, move the
|
|
* previous buffer to the free list. */
|
|
unsigned long flags;
|
|
old_desc->used = 0;
|
|
spin_lock_irqsave(&ctx->ohci->lock, flags);
|
|
list_move_tail(&old_desc->list, &ctx->buffer_list);
|
|
spin_unlock_irqrestore(&ctx->ohci->lock, flags);
|
|
}
|
|
ctx->last = last;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Allocate a new buffer and add it to the list of free buffers for this
|
|
* context. Must be called with ohci->lock held.
|
|
*/
|
|
static int context_add_buffer(struct context *ctx)
|
|
{
|
|
struct descriptor_buffer *desc;
|
|
dma_addr_t uninitialized_var(bus_addr);
|
|
int offset;
|
|
|
|
/*
|
|
* 16MB of descriptors should be far more than enough for any DMA
|
|
* program. This will catch run-away userspace or DoS attacks.
|
|
*/
|
|
if (ctx->total_allocation >= 16*1024*1024)
|
|
return -ENOMEM;
|
|
|
|
desc = dma_alloc_coherent(ctx->ohci->card.device, PAGE_SIZE,
|
|
&bus_addr, GFP_ATOMIC);
|
|
if (!desc)
|
|
return -ENOMEM;
|
|
|
|
offset = (void *)&desc->buffer - (void *)desc;
|
|
desc->buffer_size = PAGE_SIZE - offset;
|
|
desc->buffer_bus = bus_addr + offset;
|
|
desc->used = 0;
|
|
|
|
list_add_tail(&desc->list, &ctx->buffer_list);
|
|
ctx->total_allocation += PAGE_SIZE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int context_init(struct context *ctx, struct fw_ohci *ohci,
|
|
u32 regs, descriptor_callback_t callback)
|
|
{
|
|
ctx->ohci = ohci;
|
|
ctx->regs = regs;
|
|
ctx->total_allocation = 0;
|
|
|
|
INIT_LIST_HEAD(&ctx->buffer_list);
|
|
if (context_add_buffer(ctx) < 0)
|
|
return -ENOMEM;
|
|
|
|
ctx->buffer_tail = list_entry(ctx->buffer_list.next,
|
|
struct descriptor_buffer, list);
|
|
|
|
tasklet_init(&ctx->tasklet, context_tasklet, (unsigned long)ctx);
|
|
ctx->callback = callback;
|
|
|
|
/*
|
|
* We put a dummy descriptor in the buffer that has a NULL
|
|
* branch address and looks like it's been sent. That way we
|
|
* have a descriptor to append DMA programs to.
|
|
*/
|
|
memset(ctx->buffer_tail->buffer, 0, sizeof(*ctx->buffer_tail->buffer));
|
|
ctx->buffer_tail->buffer->control = cpu_to_le16(DESCRIPTOR_OUTPUT_LAST);
|
|
ctx->buffer_tail->buffer->transfer_status = cpu_to_le16(0x8011);
|
|
ctx->buffer_tail->used += sizeof(*ctx->buffer_tail->buffer);
|
|
ctx->last = ctx->buffer_tail->buffer;
|
|
ctx->prev = ctx->buffer_tail->buffer;
|
|
ctx->prev_z = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void context_release(struct context *ctx)
|
|
{
|
|
struct fw_card *card = &ctx->ohci->card;
|
|
struct descriptor_buffer *desc, *tmp;
|
|
|
|
list_for_each_entry_safe(desc, tmp, &ctx->buffer_list, list)
|
|
dma_free_coherent(card->device, PAGE_SIZE, desc,
|
|
desc->buffer_bus -
|
|
((void *)&desc->buffer - (void *)desc));
|
|
}
|
|
|
|
/* Must be called with ohci->lock held */
|
|
static struct descriptor *context_get_descriptors(struct context *ctx,
|
|
int z, dma_addr_t *d_bus)
|
|
{
|
|
struct descriptor *d = NULL;
|
|
struct descriptor_buffer *desc = ctx->buffer_tail;
|
|
|
|
if (z * sizeof(*d) > desc->buffer_size)
|
|
return NULL;
|
|
|
|
if (z * sizeof(*d) > desc->buffer_size - desc->used) {
|
|
/* No room for the descriptor in this buffer, so advance to the
|
|
* next one. */
|
|
|
|
if (desc->list.next == &ctx->buffer_list) {
|
|
/* If there is no free buffer next in the list,
|
|
* allocate one. */
|
|
if (context_add_buffer(ctx) < 0)
|
|
return NULL;
|
|
}
|
|
desc = list_entry(desc->list.next,
|
|
struct descriptor_buffer, list);
|
|
ctx->buffer_tail = desc;
|
|
}
|
|
|
|
d = desc->buffer + desc->used / sizeof(*d);
|
|
memset(d, 0, z * sizeof(*d));
|
|
*d_bus = desc->buffer_bus + desc->used;
|
|
|
|
return d;
|
|
}
|
|
|
|
static void context_run(struct context *ctx, u32 extra)
|
|
{
|
|
struct fw_ohci *ohci = ctx->ohci;
|
|
|
|
reg_write(ohci, COMMAND_PTR(ctx->regs),
|
|
le32_to_cpu(ctx->last->branch_address));
|
|
reg_write(ohci, CONTROL_CLEAR(ctx->regs), ~0);
|
|
reg_write(ohci, CONTROL_SET(ctx->regs), CONTEXT_RUN | extra);
|
|
ctx->running = true;
|
|
flush_writes(ohci);
|
|
}
|
|
|
|
static void context_append(struct context *ctx,
|
|
struct descriptor *d, int z, int extra)
|
|
{
|
|
dma_addr_t d_bus;
|
|
struct descriptor_buffer *desc = ctx->buffer_tail;
|
|
struct descriptor *d_branch;
|
|
|
|
d_bus = desc->buffer_bus + (d - desc->buffer) * sizeof(*d);
|
|
|
|
desc->used += (z + extra) * sizeof(*d);
|
|
|
|
wmb(); /* finish init of new descriptors before branch_address update */
|
|
|
|
d_branch = find_branch_descriptor(ctx->prev, ctx->prev_z);
|
|
d_branch->branch_address = cpu_to_le32(d_bus | z);
|
|
|
|
/*
|
|
* VT6306 incorrectly checks only the single descriptor at the
|
|
* CommandPtr when the wake bit is written, so if it's a
|
|
* multi-descriptor block starting with an INPUT_MORE, put a copy of
|
|
* the branch address in the first descriptor.
|
|
*
|
|
* Not doing this for transmit contexts since not sure how it interacts
|
|
* with skip addresses.
|
|
*/
|
|
if (unlikely(ctx->ohci->quirks & QUIRK_IR_WAKE) &&
|
|
d_branch != ctx->prev &&
|
|
(ctx->prev->control & cpu_to_le16(DESCRIPTOR_CMD)) ==
|
|
cpu_to_le16(DESCRIPTOR_INPUT_MORE)) {
|
|
ctx->prev->branch_address = cpu_to_le32(d_bus | z);
|
|
}
|
|
|
|
ctx->prev = d;
|
|
ctx->prev_z = z;
|
|
}
|
|
|
|
static void context_stop(struct context *ctx)
|
|
{
|
|
struct fw_ohci *ohci = ctx->ohci;
|
|
u32 reg;
|
|
int i;
|
|
|
|
reg_write(ohci, CONTROL_CLEAR(ctx->regs), CONTEXT_RUN);
|
|
ctx->running = false;
|
|
|
|
for (i = 0; i < 1000; i++) {
|
|
reg = reg_read(ohci, CONTROL_SET(ctx->regs));
|
|
if ((reg & CONTEXT_ACTIVE) == 0)
|
|
return;
|
|
|
|
if (i)
|
|
udelay(10);
|
|
}
|
|
ohci_err(ohci, "DMA context still active (0x%08x)\n", reg);
|
|
}
|
|
|
|
struct driver_data {
|
|
u8 inline_data[8];
|
|
struct fw_packet *packet;
|
|
};
|
|
|
|
/*
|
|
* This function apppends a packet to the DMA queue for transmission.
|
|
* Must always be called with the ochi->lock held to ensure proper
|
|
* generation handling and locking around packet queue manipulation.
|
|
*/
|
|
static int at_context_queue_packet(struct context *ctx,
|
|
struct fw_packet *packet)
|
|
{
|
|
struct fw_ohci *ohci = ctx->ohci;
|
|
dma_addr_t d_bus, uninitialized_var(payload_bus);
|
|
struct driver_data *driver_data;
|
|
struct descriptor *d, *last;
|
|
__le32 *header;
|
|
int z, tcode;
|
|
|
|
d = context_get_descriptors(ctx, 4, &d_bus);
|
|
if (d == NULL) {
|
|
packet->ack = RCODE_SEND_ERROR;
|
|
return -1;
|
|
}
|
|
|
|
d[0].control = cpu_to_le16(DESCRIPTOR_KEY_IMMEDIATE);
|
|
d[0].res_count = cpu_to_le16(packet->timestamp);
|
|
|
|
/*
|
|
* The DMA format for asynchronous link packets is different
|
|
* from the IEEE1394 layout, so shift the fields around
|
|
* accordingly.
|
|
*/
|
|
|
|
tcode = (packet->header[0] >> 4) & 0x0f;
|
|
header = (__le32 *) &d[1];
|
|
switch (tcode) {
|
|
case TCODE_WRITE_QUADLET_REQUEST:
|
|
case TCODE_WRITE_BLOCK_REQUEST:
|
|
case TCODE_WRITE_RESPONSE:
|
|
case TCODE_READ_QUADLET_REQUEST:
|
|
case TCODE_READ_BLOCK_REQUEST:
|
|
case TCODE_READ_QUADLET_RESPONSE:
|
|
case TCODE_READ_BLOCK_RESPONSE:
|
|
case TCODE_LOCK_REQUEST:
|
|
case TCODE_LOCK_RESPONSE:
|
|
header[0] = cpu_to_le32((packet->header[0] & 0xffff) |
|
|
(packet->speed << 16));
|
|
header[1] = cpu_to_le32((packet->header[1] & 0xffff) |
|
|
(packet->header[0] & 0xffff0000));
|
|
header[2] = cpu_to_le32(packet->header[2]);
|
|
|
|
if (TCODE_IS_BLOCK_PACKET(tcode))
|
|
header[3] = cpu_to_le32(packet->header[3]);
|
|
else
|
|
header[3] = (__force __le32) packet->header[3];
|
|
|
|
d[0].req_count = cpu_to_le16(packet->header_length);
|
|
break;
|
|
|
|
case TCODE_LINK_INTERNAL:
|
|
header[0] = cpu_to_le32((OHCI1394_phy_tcode << 4) |
|
|
(packet->speed << 16));
|
|
header[1] = cpu_to_le32(packet->header[1]);
|
|
header[2] = cpu_to_le32(packet->header[2]);
|
|
d[0].req_count = cpu_to_le16(12);
|
|
|
|
if (is_ping_packet(&packet->header[1]))
|
|
d[0].control |= cpu_to_le16(DESCRIPTOR_PING);
|
|
break;
|
|
|
|
case TCODE_STREAM_DATA:
|
|
header[0] = cpu_to_le32((packet->header[0] & 0xffff) |
|
|
(packet->speed << 16));
|
|
header[1] = cpu_to_le32(packet->header[0] & 0xffff0000);
|
|
d[0].req_count = cpu_to_le16(8);
|
|
break;
|
|
|
|
default:
|
|
/* BUG(); */
|
|
packet->ack = RCODE_SEND_ERROR;
|
|
return -1;
|
|
}
|
|
|
|
BUILD_BUG_ON(sizeof(struct driver_data) > sizeof(struct descriptor));
|
|
driver_data = (struct driver_data *) &d[3];
|
|
driver_data->packet = packet;
|
|
packet->driver_data = driver_data;
|
|
|
|
if (packet->payload_length > 0) {
|
|
if (packet->payload_length > sizeof(driver_data->inline_data)) {
|
|
payload_bus = dma_map_single(ohci->card.device,
|
|
packet->payload,
|
|
packet->payload_length,
|
|
DMA_TO_DEVICE);
|
|
if (dma_mapping_error(ohci->card.device, payload_bus)) {
|
|
packet->ack = RCODE_SEND_ERROR;
|
|
return -1;
|
|
}
|
|
packet->payload_bus = payload_bus;
|
|
packet->payload_mapped = true;
|
|
} else {
|
|
memcpy(driver_data->inline_data, packet->payload,
|
|
packet->payload_length);
|
|
payload_bus = d_bus + 3 * sizeof(*d);
|
|
}
|
|
|
|
d[2].req_count = cpu_to_le16(packet->payload_length);
|
|
d[2].data_address = cpu_to_le32(payload_bus);
|
|
last = &d[2];
|
|
z = 3;
|
|
} else {
|
|
last = &d[0];
|
|
z = 2;
|
|
}
|
|
|
|
last->control |= cpu_to_le16(DESCRIPTOR_OUTPUT_LAST |
|
|
DESCRIPTOR_IRQ_ALWAYS |
|
|
DESCRIPTOR_BRANCH_ALWAYS);
|
|
|
|
/* FIXME: Document how the locking works. */
|
|
if (ohci->generation != packet->generation) {
|
|
if (packet->payload_mapped)
|
|
dma_unmap_single(ohci->card.device, payload_bus,
|
|
packet->payload_length, DMA_TO_DEVICE);
|
|
packet->ack = RCODE_GENERATION;
|
|
return -1;
|
|
}
|
|
|
|
context_append(ctx, d, z, 4 - z);
|
|
|
|
if (ctx->running)
|
|
reg_write(ohci, CONTROL_SET(ctx->regs), CONTEXT_WAKE);
|
|
else
|
|
context_run(ctx, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void at_context_flush(struct context *ctx)
|
|
{
|
|
tasklet_disable(&ctx->tasklet);
|
|
|
|
ctx->flushing = true;
|
|
context_tasklet((unsigned long)ctx);
|
|
ctx->flushing = false;
|
|
|
|
tasklet_enable(&ctx->tasklet);
|
|
}
|
|
|
|
static int handle_at_packet(struct context *context,
|
|
struct descriptor *d,
|
|
struct descriptor *last)
|
|
{
|
|
struct driver_data *driver_data;
|
|
struct fw_packet *packet;
|
|
struct fw_ohci *ohci = context->ohci;
|
|
int evt;
|
|
|
|
if (last->transfer_status == 0 && !context->flushing)
|
|
/* This descriptor isn't done yet, stop iteration. */
|
|
return 0;
|
|
|
|
driver_data = (struct driver_data *) &d[3];
|
|
packet = driver_data->packet;
|
|
if (packet == NULL)
|
|
/* This packet was cancelled, just continue. */
|
|
return 1;
|
|
|
|
if (packet->payload_mapped)
|
|
dma_unmap_single(ohci->card.device, packet->payload_bus,
|
|
packet->payload_length, DMA_TO_DEVICE);
|
|
|
|
evt = le16_to_cpu(last->transfer_status) & 0x1f;
|
|
packet->timestamp = le16_to_cpu(last->res_count);
|
|
|
|
log_ar_at_event(ohci, 'T', packet->speed, packet->header, evt);
|
|
|
|
switch (evt) {
|
|
case OHCI1394_evt_timeout:
|
|
/* Async response transmit timed out. */
|
|
packet->ack = RCODE_CANCELLED;
|
|
break;
|
|
|
|
case OHCI1394_evt_flushed:
|
|
/*
|
|
* The packet was flushed should give same error as
|
|
* when we try to use a stale generation count.
|
|
*/
|
|
packet->ack = RCODE_GENERATION;
|
|
break;
|
|
|
|
case OHCI1394_evt_missing_ack:
|
|
if (context->flushing)
|
|
packet->ack = RCODE_GENERATION;
|
|
else {
|
|
/*
|
|
* Using a valid (current) generation count, but the
|
|
* node is not on the bus or not sending acks.
|
|
*/
|
|
packet->ack = RCODE_NO_ACK;
|
|
}
|
|
break;
|
|
|
|
case ACK_COMPLETE + 0x10:
|
|
case ACK_PENDING + 0x10:
|
|
case ACK_BUSY_X + 0x10:
|
|
case ACK_BUSY_A + 0x10:
|
|
case ACK_BUSY_B + 0x10:
|
|
case ACK_DATA_ERROR + 0x10:
|
|
case ACK_TYPE_ERROR + 0x10:
|
|
packet->ack = evt - 0x10;
|
|
break;
|
|
|
|
case OHCI1394_evt_no_status:
|
|
if (context->flushing) {
|
|
packet->ack = RCODE_GENERATION;
|
|
break;
|
|
}
|
|
/* fall through */
|
|
|
|
default:
|
|
packet->ack = RCODE_SEND_ERROR;
|
|
break;
|
|
}
|
|
|
|
packet->callback(packet, &ohci->card, packet->ack);
|
|
|
|
return 1;
|
|
}
|
|
|
|
#define HEADER_GET_DESTINATION(q) (((q) >> 16) & 0xffff)
|
|
#define HEADER_GET_TCODE(q) (((q) >> 4) & 0x0f)
|
|
#define HEADER_GET_OFFSET_HIGH(q) (((q) >> 0) & 0xffff)
|
|
#define HEADER_GET_DATA_LENGTH(q) (((q) >> 16) & 0xffff)
|
|
#define HEADER_GET_EXTENDED_TCODE(q) (((q) >> 0) & 0xffff)
|
|
|
|
static void handle_local_rom(struct fw_ohci *ohci,
|
|
struct fw_packet *packet, u32 csr)
|
|
{
|
|
struct fw_packet response;
|
|
int tcode, length, i;
|
|
|
|
tcode = HEADER_GET_TCODE(packet->header[0]);
|
|
if (TCODE_IS_BLOCK_PACKET(tcode))
|
|
length = HEADER_GET_DATA_LENGTH(packet->header[3]);
|
|
else
|
|
length = 4;
|
|
|
|
i = csr - CSR_CONFIG_ROM;
|
|
if (i + length > CONFIG_ROM_SIZE) {
|
|
fw_fill_response(&response, packet->header,
|
|
RCODE_ADDRESS_ERROR, NULL, 0);
|
|
} else if (!TCODE_IS_READ_REQUEST(tcode)) {
|
|
fw_fill_response(&response, packet->header,
|
|
RCODE_TYPE_ERROR, NULL, 0);
|
|
} else {
|
|
fw_fill_response(&response, packet->header, RCODE_COMPLETE,
|
|
(void *) ohci->config_rom + i, length);
|
|
}
|
|
|
|
fw_core_handle_response(&ohci->card, &response);
|
|
}
|
|
|
|
static void handle_local_lock(struct fw_ohci *ohci,
|
|
struct fw_packet *packet, u32 csr)
|
|
{
|
|
struct fw_packet response;
|
|
int tcode, length, ext_tcode, sel, try;
|
|
__be32 *payload, lock_old;
|
|
u32 lock_arg, lock_data;
|
|
|
|
tcode = HEADER_GET_TCODE(packet->header[0]);
|
|
length = HEADER_GET_DATA_LENGTH(packet->header[3]);
|
|
payload = packet->payload;
|
|
ext_tcode = HEADER_GET_EXTENDED_TCODE(packet->header[3]);
|
|
|
|
if (tcode == TCODE_LOCK_REQUEST &&
|
|
ext_tcode == EXTCODE_COMPARE_SWAP && length == 8) {
|
|
lock_arg = be32_to_cpu(payload[0]);
|
|
lock_data = be32_to_cpu(payload[1]);
|
|
} else if (tcode == TCODE_READ_QUADLET_REQUEST) {
|
|
lock_arg = 0;
|
|
lock_data = 0;
|
|
} else {
|
|
fw_fill_response(&response, packet->header,
|
|
RCODE_TYPE_ERROR, NULL, 0);
|
|
goto out;
|
|
}
|
|
|
|
sel = (csr - CSR_BUS_MANAGER_ID) / 4;
|
|
reg_write(ohci, OHCI1394_CSRData, lock_data);
|
|
reg_write(ohci, OHCI1394_CSRCompareData, lock_arg);
|
|
reg_write(ohci, OHCI1394_CSRControl, sel);
|
|
|
|
for (try = 0; try < 20; try++)
|
|
if (reg_read(ohci, OHCI1394_CSRControl) & 0x80000000) {
|
|
lock_old = cpu_to_be32(reg_read(ohci,
|
|
OHCI1394_CSRData));
|
|
fw_fill_response(&response, packet->header,
|
|
RCODE_COMPLETE,
|
|
&lock_old, sizeof(lock_old));
|
|
goto out;
|
|
}
|
|
|
|
ohci_err(ohci, "swap not done (CSR lock timeout)\n");
|
|
fw_fill_response(&response, packet->header, RCODE_BUSY, NULL, 0);
|
|
|
|
out:
|
|
fw_core_handle_response(&ohci->card, &response);
|
|
}
|
|
|
|
static void handle_local_request(struct context *ctx, struct fw_packet *packet)
|
|
{
|
|
u64 offset, csr;
|
|
|
|
if (ctx == &ctx->ohci->at_request_ctx) {
|
|
packet->ack = ACK_PENDING;
|
|
packet->callback(packet, &ctx->ohci->card, packet->ack);
|
|
}
|
|
|
|
offset =
|
|
((unsigned long long)
|
|
HEADER_GET_OFFSET_HIGH(packet->header[1]) << 32) |
|
|
packet->header[2];
|
|
csr = offset - CSR_REGISTER_BASE;
|
|
|
|
/* Handle config rom reads. */
|
|
if (csr >= CSR_CONFIG_ROM && csr < CSR_CONFIG_ROM_END)
|
|
handle_local_rom(ctx->ohci, packet, csr);
|
|
else switch (csr) {
|
|
case CSR_BUS_MANAGER_ID:
|
|
case CSR_BANDWIDTH_AVAILABLE:
|
|
case CSR_CHANNELS_AVAILABLE_HI:
|
|
case CSR_CHANNELS_AVAILABLE_LO:
|
|
handle_local_lock(ctx->ohci, packet, csr);
|
|
break;
|
|
default:
|
|
if (ctx == &ctx->ohci->at_request_ctx)
|
|
fw_core_handle_request(&ctx->ohci->card, packet);
|
|
else
|
|
fw_core_handle_response(&ctx->ohci->card, packet);
|
|
break;
|
|
}
|
|
|
|
if (ctx == &ctx->ohci->at_response_ctx) {
|
|
packet->ack = ACK_COMPLETE;
|
|
packet->callback(packet, &ctx->ohci->card, packet->ack);
|
|
}
|
|
}
|
|
|
|
static void at_context_transmit(struct context *ctx, struct fw_packet *packet)
|
|
{
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
spin_lock_irqsave(&ctx->ohci->lock, flags);
|
|
|
|
if (HEADER_GET_DESTINATION(packet->header[0]) == ctx->ohci->node_id &&
|
|
ctx->ohci->generation == packet->generation) {
|
|
spin_unlock_irqrestore(&ctx->ohci->lock, flags);
|
|
handle_local_request(ctx, packet);
|
|
return;
|
|
}
|
|
|
|
ret = at_context_queue_packet(ctx, packet);
|
|
spin_unlock_irqrestore(&ctx->ohci->lock, flags);
|
|
|
|
if (ret < 0)
|
|
packet->callback(packet, &ctx->ohci->card, packet->ack);
|
|
|
|
}
|
|
|
|
static void detect_dead_context(struct fw_ohci *ohci,
|
|
const char *name, unsigned int regs)
|
|
{
|
|
u32 ctl;
|
|
|
|
ctl = reg_read(ohci, CONTROL_SET(regs));
|
|
if (ctl & CONTEXT_DEAD)
|
|
ohci_err(ohci, "DMA context %s has stopped, error code: %s\n",
|
|
name, evts[ctl & 0x1f]);
|
|
}
|
|
|
|
static void handle_dead_contexts(struct fw_ohci *ohci)
|
|
{
|
|
unsigned int i;
|
|
char name[8];
|
|
|
|
detect_dead_context(ohci, "ATReq", OHCI1394_AsReqTrContextBase);
|
|
detect_dead_context(ohci, "ATRsp", OHCI1394_AsRspTrContextBase);
|
|
detect_dead_context(ohci, "ARReq", OHCI1394_AsReqRcvContextBase);
|
|
detect_dead_context(ohci, "ARRsp", OHCI1394_AsRspRcvContextBase);
|
|
for (i = 0; i < 32; ++i) {
|
|
if (!(ohci->it_context_support & (1 << i)))
|
|
continue;
|
|
sprintf(name, "IT%u", i);
|
|
detect_dead_context(ohci, name, OHCI1394_IsoXmitContextBase(i));
|
|
}
|
|
for (i = 0; i < 32; ++i) {
|
|
if (!(ohci->ir_context_support & (1 << i)))
|
|
continue;
|
|
sprintf(name, "IR%u", i);
|
|
detect_dead_context(ohci, name, OHCI1394_IsoRcvContextBase(i));
|
|
}
|
|
/* TODO: maybe try to flush and restart the dead contexts */
|
|
}
|
|
|
|
static u32 cycle_timer_ticks(u32 cycle_timer)
|
|
{
|
|
u32 ticks;
|
|
|
|
ticks = cycle_timer & 0xfff;
|
|
ticks += 3072 * ((cycle_timer >> 12) & 0x1fff);
|
|
ticks += (3072 * 8000) * (cycle_timer >> 25);
|
|
|
|
return ticks;
|
|
}
|
|
|
|
/*
|
|
* Some controllers exhibit one or more of the following bugs when updating the
|
|
* iso cycle timer register:
|
|
* - When the lowest six bits are wrapping around to zero, a read that happens
|
|
* at the same time will return garbage in the lowest ten bits.
|
|
* - When the cycleOffset field wraps around to zero, the cycleCount field is
|
|
* not incremented for about 60 ns.
|
|
* - Occasionally, the entire register reads zero.
|
|
*
|
|
* To catch these, we read the register three times and ensure that the
|
|
* difference between each two consecutive reads is approximately the same, i.e.
|
|
* less than twice the other. Furthermore, any negative difference indicates an
|
|
* error. (A PCI read should take at least 20 ticks of the 24.576 MHz timer to
|
|
* execute, so we have enough precision to compute the ratio of the differences.)
|
|
*/
|
|
static u32 get_cycle_time(struct fw_ohci *ohci)
|
|
{
|
|
u32 c0, c1, c2;
|
|
u32 t0, t1, t2;
|
|
s32 diff01, diff12;
|
|
int i;
|
|
|
|
c2 = reg_read(ohci, OHCI1394_IsochronousCycleTimer);
|
|
|
|
if (ohci->quirks & QUIRK_CYCLE_TIMER) {
|
|
i = 0;
|
|
c1 = c2;
|
|
c2 = reg_read(ohci, OHCI1394_IsochronousCycleTimer);
|
|
do {
|
|
c0 = c1;
|
|
c1 = c2;
|
|
c2 = reg_read(ohci, OHCI1394_IsochronousCycleTimer);
|
|
t0 = cycle_timer_ticks(c0);
|
|
t1 = cycle_timer_ticks(c1);
|
|
t2 = cycle_timer_ticks(c2);
|
|
diff01 = t1 - t0;
|
|
diff12 = t2 - t1;
|
|
} while ((diff01 <= 0 || diff12 <= 0 ||
|
|
diff01 / diff12 >= 2 || diff12 / diff01 >= 2)
|
|
&& i++ < 20);
|
|
}
|
|
|
|
return c2;
|
|
}
|
|
|
|
/*
|
|
* This function has to be called at least every 64 seconds. The bus_time
|
|
* field stores not only the upper 25 bits of the BUS_TIME register but also
|
|
* the most significant bit of the cycle timer in bit 6 so that we can detect
|
|
* changes in this bit.
|
|
*/
|
|
static u32 update_bus_time(struct fw_ohci *ohci)
|
|
{
|
|
u32 cycle_time_seconds = get_cycle_time(ohci) >> 25;
|
|
|
|
if (unlikely(!ohci->bus_time_running)) {
|
|
reg_write(ohci, OHCI1394_IntMaskSet, OHCI1394_cycle64Seconds);
|
|
ohci->bus_time = (lower_32_bits(get_seconds()) & ~0x7f) |
|
|
(cycle_time_seconds & 0x40);
|
|
ohci->bus_time_running = true;
|
|
}
|
|
|
|
if ((ohci->bus_time & 0x40) != (cycle_time_seconds & 0x40))
|
|
ohci->bus_time += 0x40;
|
|
|
|
return ohci->bus_time | cycle_time_seconds;
|
|
}
|
|
|
|
static int get_status_for_port(struct fw_ohci *ohci, int port_index)
|
|
{
|
|
int reg;
|
|
|
|
mutex_lock(&ohci->phy_reg_mutex);
|
|
reg = write_phy_reg(ohci, 7, port_index);
|
|
if (reg >= 0)
|
|
reg = read_phy_reg(ohci, 8);
|
|
mutex_unlock(&ohci->phy_reg_mutex);
|
|
if (reg < 0)
|
|
return reg;
|
|
|
|
switch (reg & 0x0f) {
|
|
case 0x06:
|
|
return 2; /* is child node (connected to parent node) */
|
|
case 0x0e:
|
|
return 3; /* is parent node (connected to child node) */
|
|
}
|
|
return 1; /* not connected */
|
|
}
|
|
|
|
static int get_self_id_pos(struct fw_ohci *ohci, u32 self_id,
|
|
int self_id_count)
|
|
{
|
|
int i;
|
|
u32 entry;
|
|
|
|
for (i = 0; i < self_id_count; i++) {
|
|
entry = ohci->self_id_buffer[i];
|
|
if ((self_id & 0xff000000) == (entry & 0xff000000))
|
|
return -1;
|
|
if ((self_id & 0xff000000) < (entry & 0xff000000))
|
|
return i;
|
|
}
|
|
return i;
|
|
}
|
|
|
|
static int initiated_reset(struct fw_ohci *ohci)
|
|
{
|
|
int reg;
|
|
int ret = 0;
|
|
|
|
mutex_lock(&ohci->phy_reg_mutex);
|
|
reg = write_phy_reg(ohci, 7, 0xe0); /* Select page 7 */
|
|
if (reg >= 0) {
|
|
reg = read_phy_reg(ohci, 8);
|
|
reg |= 0x40;
|
|
reg = write_phy_reg(ohci, 8, reg); /* set PMODE bit */
|
|
if (reg >= 0) {
|
|
reg = read_phy_reg(ohci, 12); /* read register 12 */
|
|
if (reg >= 0) {
|
|
if ((reg & 0x08) == 0x08) {
|
|
/* bit 3 indicates "initiated reset" */
|
|
ret = 0x2;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
mutex_unlock(&ohci->phy_reg_mutex);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* TI TSB82AA2B and TSB12LV26 do not receive the selfID of a locally
|
|
* attached TSB41BA3D phy; see http://www.ti.com/litv/pdf/sllz059.
|
|
* Construct the selfID from phy register contents.
|
|
*/
|
|
static int find_and_insert_self_id(struct fw_ohci *ohci, int self_id_count)
|
|
{
|
|
int reg, i, pos, status;
|
|
/* link active 1, speed 3, bridge 0, contender 1, more packets 0 */
|
|
u32 self_id = 0x8040c800;
|
|
|
|
reg = reg_read(ohci, OHCI1394_NodeID);
|
|
if (!(reg & OHCI1394_NodeID_idValid)) {
|
|
ohci_notice(ohci,
|
|
"node ID not valid, new bus reset in progress\n");
|
|
return -EBUSY;
|
|
}
|
|
self_id |= ((reg & 0x3f) << 24); /* phy ID */
|
|
|
|
reg = ohci_read_phy_reg(&ohci->card, 4);
|
|
if (reg < 0)
|
|
return reg;
|
|
self_id |= ((reg & 0x07) << 8); /* power class */
|
|
|
|
reg = ohci_read_phy_reg(&ohci->card, 1);
|
|
if (reg < 0)
|
|
return reg;
|
|
self_id |= ((reg & 0x3f) << 16); /* gap count */
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
status = get_status_for_port(ohci, i);
|
|
if (status < 0)
|
|
return status;
|
|
self_id |= ((status & 0x3) << (6 - (i * 2)));
|
|
}
|
|
|
|
self_id |= initiated_reset(ohci);
|
|
|
|
pos = get_self_id_pos(ohci, self_id, self_id_count);
|
|
if (pos >= 0) {
|
|
memmove(&(ohci->self_id_buffer[pos+1]),
|
|
&(ohci->self_id_buffer[pos]),
|
|
(self_id_count - pos) * sizeof(*ohci->self_id_buffer));
|
|
ohci->self_id_buffer[pos] = self_id;
|
|
self_id_count++;
|
|
}
|
|
return self_id_count;
|
|
}
|
|
|
|
static void bus_reset_work(struct work_struct *work)
|
|
{
|
|
struct fw_ohci *ohci =
|
|
container_of(work, struct fw_ohci, bus_reset_work);
|
|
int self_id_count, generation, new_generation, i, j;
|
|
u32 reg;
|
|
void *free_rom = NULL;
|
|
dma_addr_t free_rom_bus = 0;
|
|
bool is_new_root;
|
|
|
|
reg = reg_read(ohci, OHCI1394_NodeID);
|
|
if (!(reg & OHCI1394_NodeID_idValid)) {
|
|
ohci_notice(ohci,
|
|
"node ID not valid, new bus reset in progress\n");
|
|
return;
|
|
}
|
|
if ((reg & OHCI1394_NodeID_nodeNumber) == 63) {
|
|
ohci_notice(ohci, "malconfigured bus\n");
|
|
return;
|
|
}
|
|
ohci->node_id = reg & (OHCI1394_NodeID_busNumber |
|
|
OHCI1394_NodeID_nodeNumber);
|
|
|
|
is_new_root = (reg & OHCI1394_NodeID_root) != 0;
|
|
if (!(ohci->is_root && is_new_root))
|
|
reg_write(ohci, OHCI1394_LinkControlSet,
|
|
OHCI1394_LinkControl_cycleMaster);
|
|
ohci->is_root = is_new_root;
|
|
|
|
reg = reg_read(ohci, OHCI1394_SelfIDCount);
|
|
if (reg & OHCI1394_SelfIDCount_selfIDError) {
|
|
ohci_notice(ohci, "self ID receive error\n");
|
|
return;
|
|
}
|
|
/*
|
|
* The count in the SelfIDCount register is the number of
|
|
* bytes in the self ID receive buffer. Since we also receive
|
|
* the inverted quadlets and a header quadlet, we shift one
|
|
* bit extra to get the actual number of self IDs.
|
|
*/
|
|
self_id_count = (reg >> 3) & 0xff;
|
|
|
|
if (self_id_count > 252) {
|
|
ohci_notice(ohci, "bad selfIDSize (%08x)\n", reg);
|
|
return;
|
|
}
|
|
|
|
generation = (cond_le32_to_cpu(ohci->self_id[0]) >> 16) & 0xff;
|
|
rmb();
|
|
|
|
for (i = 1, j = 0; j < self_id_count; i += 2, j++) {
|
|
u32 id = cond_le32_to_cpu(ohci->self_id[i]);
|
|
u32 id2 = cond_le32_to_cpu(ohci->self_id[i + 1]);
|
|
|
|
if (id != ~id2) {
|
|
/*
|
|
* If the invalid data looks like a cycle start packet,
|
|
* it's likely to be the result of the cycle master
|
|
* having a wrong gap count. In this case, the self IDs
|
|
* so far are valid and should be processed so that the
|
|
* bus manager can then correct the gap count.
|
|
*/
|
|
if (id == 0xffff008f) {
|
|
ohci_notice(ohci, "ignoring spurious self IDs\n");
|
|
self_id_count = j;
|
|
break;
|
|
}
|
|
|
|
ohci_notice(ohci, "bad self ID %d/%d (%08x != ~%08x)\n",
|
|
j, self_id_count, id, id2);
|
|
return;
|
|
}
|
|
ohci->self_id_buffer[j] = id;
|
|
}
|
|
|
|
if (ohci->quirks & QUIRK_TI_SLLZ059) {
|
|
self_id_count = find_and_insert_self_id(ohci, self_id_count);
|
|
if (self_id_count < 0) {
|
|
ohci_notice(ohci,
|
|
"could not construct local self ID\n");
|
|
return;
|
|
}
|
|
}
|
|
|
|
if (self_id_count == 0) {
|
|
ohci_notice(ohci, "no self IDs\n");
|
|
return;
|
|
}
|
|
rmb();
|
|
|
|
/*
|
|
* Check the consistency of the self IDs we just read. The
|
|
* problem we face is that a new bus reset can start while we
|
|
* read out the self IDs from the DMA buffer. If this happens,
|
|
* the DMA buffer will be overwritten with new self IDs and we
|
|
* will read out inconsistent data. The OHCI specification
|
|
* (section 11.2) recommends a technique similar to
|
|
* linux/seqlock.h, where we remember the generation of the
|
|
* self IDs in the buffer before reading them out and compare
|
|
* it to the current generation after reading them out. If
|
|
* the two generations match we know we have a consistent set
|
|
* of self IDs.
|
|
*/
|
|
|
|
new_generation = (reg_read(ohci, OHCI1394_SelfIDCount) >> 16) & 0xff;
|
|
if (new_generation != generation) {
|
|
ohci_notice(ohci, "new bus reset, discarding self ids\n");
|
|
return;
|
|
}
|
|
|
|
/* FIXME: Document how the locking works. */
|
|
spin_lock_irq(&ohci->lock);
|
|
|
|
ohci->generation = -1; /* prevent AT packet queueing */
|
|
context_stop(&ohci->at_request_ctx);
|
|
context_stop(&ohci->at_response_ctx);
|
|
|
|
spin_unlock_irq(&ohci->lock);
|
|
|
|
/*
|
|
* Per OHCI 1.2 draft, clause 7.2.3.3, hardware may leave unsent
|
|
* packets in the AT queues and software needs to drain them.
|
|
* Some OHCI 1.1 controllers (JMicron) apparently require this too.
|
|
*/
|
|
at_context_flush(&ohci->at_request_ctx);
|
|
at_context_flush(&ohci->at_response_ctx);
|
|
|
|
spin_lock_irq(&ohci->lock);
|
|
|
|
ohci->generation = generation;
|
|
reg_write(ohci, OHCI1394_IntEventClear, OHCI1394_busReset);
|
|
|
|
if (ohci->quirks & QUIRK_RESET_PACKET)
|
|
ohci->request_generation = generation;
|
|
|
|
/*
|
|
* This next bit is unrelated to the AT context stuff but we
|
|
* have to do it under the spinlock also. If a new config rom
|
|
* was set up before this reset, the old one is now no longer
|
|
* in use and we can free it. Update the config rom pointers
|
|
* to point to the current config rom and clear the
|
|
* next_config_rom pointer so a new update can take place.
|
|
*/
|
|
|
|
if (ohci->next_config_rom != NULL) {
|
|
if (ohci->next_config_rom != ohci->config_rom) {
|
|
free_rom = ohci->config_rom;
|
|
free_rom_bus = ohci->config_rom_bus;
|
|
}
|
|
ohci->config_rom = ohci->next_config_rom;
|
|
ohci->config_rom_bus = ohci->next_config_rom_bus;
|
|
ohci->next_config_rom = NULL;
|
|
|
|
/*
|
|
* Restore config_rom image and manually update
|
|
* config_rom registers. Writing the header quadlet
|
|
* will indicate that the config rom is ready, so we
|
|
* do that last.
|
|
*/
|
|
reg_write(ohci, OHCI1394_BusOptions,
|
|
be32_to_cpu(ohci->config_rom[2]));
|
|
ohci->config_rom[0] = ohci->next_header;
|
|
reg_write(ohci, OHCI1394_ConfigROMhdr,
|
|
be32_to_cpu(ohci->next_header));
|
|
}
|
|
|
|
if (param_remote_dma) {
|
|
reg_write(ohci, OHCI1394_PhyReqFilterHiSet, ~0);
|
|
reg_write(ohci, OHCI1394_PhyReqFilterLoSet, ~0);
|
|
}
|
|
|
|
spin_unlock_irq(&ohci->lock);
|
|
|
|
if (free_rom)
|
|
dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE,
|
|
free_rom, free_rom_bus);
|
|
|
|
log_selfids(ohci, generation, self_id_count);
|
|
|
|
fw_core_handle_bus_reset(&ohci->card, ohci->node_id, generation,
|
|
self_id_count, ohci->self_id_buffer,
|
|
ohci->csr_state_setclear_abdicate);
|
|
ohci->csr_state_setclear_abdicate = false;
|
|
}
|
|
|
|
static irqreturn_t irq_handler(int irq, void *data)
|
|
{
|
|
struct fw_ohci *ohci = data;
|
|
u32 event, iso_event;
|
|
int i;
|
|
|
|
event = reg_read(ohci, OHCI1394_IntEventClear);
|
|
|
|
if (!event || !~event)
|
|
return IRQ_NONE;
|
|
|
|
/*
|
|
* busReset and postedWriteErr must not be cleared yet
|
|
* (OHCI 1.1 clauses 7.2.3.2 and 13.2.8.1)
|
|
*/
|
|
reg_write(ohci, OHCI1394_IntEventClear,
|
|
event & ~(OHCI1394_busReset | OHCI1394_postedWriteErr));
|
|
log_irqs(ohci, event);
|
|
|
|
if (event & OHCI1394_selfIDComplete)
|
|
queue_work(selfid_workqueue, &ohci->bus_reset_work);
|
|
|
|
if (event & OHCI1394_RQPkt)
|
|
tasklet_schedule(&ohci->ar_request_ctx.tasklet);
|
|
|
|
if (event & OHCI1394_RSPkt)
|
|
tasklet_schedule(&ohci->ar_response_ctx.tasklet);
|
|
|
|
if (event & OHCI1394_reqTxComplete)
|
|
tasklet_schedule(&ohci->at_request_ctx.tasklet);
|
|
|
|
if (event & OHCI1394_respTxComplete)
|
|
tasklet_schedule(&ohci->at_response_ctx.tasklet);
|
|
|
|
if (event & OHCI1394_isochRx) {
|
|
iso_event = reg_read(ohci, OHCI1394_IsoRecvIntEventClear);
|
|
reg_write(ohci, OHCI1394_IsoRecvIntEventClear, iso_event);
|
|
|
|
while (iso_event) {
|
|
i = ffs(iso_event) - 1;
|
|
tasklet_schedule(
|
|
&ohci->ir_context_list[i].context.tasklet);
|
|
iso_event &= ~(1 << i);
|
|
}
|
|
}
|
|
|
|
if (event & OHCI1394_isochTx) {
|
|
iso_event = reg_read(ohci, OHCI1394_IsoXmitIntEventClear);
|
|
reg_write(ohci, OHCI1394_IsoXmitIntEventClear, iso_event);
|
|
|
|
while (iso_event) {
|
|
i = ffs(iso_event) - 1;
|
|
tasklet_schedule(
|
|
&ohci->it_context_list[i].context.tasklet);
|
|
iso_event &= ~(1 << i);
|
|
}
|
|
}
|
|
|
|
if (unlikely(event & OHCI1394_regAccessFail))
|
|
ohci_err(ohci, "register access failure\n");
|
|
|
|
if (unlikely(event & OHCI1394_postedWriteErr)) {
|
|
reg_read(ohci, OHCI1394_PostedWriteAddressHi);
|
|
reg_read(ohci, OHCI1394_PostedWriteAddressLo);
|
|
reg_write(ohci, OHCI1394_IntEventClear,
|
|
OHCI1394_postedWriteErr);
|
|
if (printk_ratelimit())
|
|
ohci_err(ohci, "PCI posted write error\n");
|
|
}
|
|
|
|
if (unlikely(event & OHCI1394_cycleTooLong)) {
|
|
if (printk_ratelimit())
|
|
ohci_notice(ohci, "isochronous cycle too long\n");
|
|
reg_write(ohci, OHCI1394_LinkControlSet,
|
|
OHCI1394_LinkControl_cycleMaster);
|
|
}
|
|
|
|
if (unlikely(event & OHCI1394_cycleInconsistent)) {
|
|
/*
|
|
* We need to clear this event bit in order to make
|
|
* cycleMatch isochronous I/O work. In theory we should
|
|
* stop active cycleMatch iso contexts now and restart
|
|
* them at least two cycles later. (FIXME?)
|
|
*/
|
|
if (printk_ratelimit())
|
|
ohci_notice(ohci, "isochronous cycle inconsistent\n");
|
|
}
|
|
|
|
if (unlikely(event & OHCI1394_unrecoverableError))
|
|
handle_dead_contexts(ohci);
|
|
|
|
if (event & OHCI1394_cycle64Seconds) {
|
|
spin_lock(&ohci->lock);
|
|
update_bus_time(ohci);
|
|
spin_unlock(&ohci->lock);
|
|
} else
|
|
flush_writes(ohci);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int software_reset(struct fw_ohci *ohci)
|
|
{
|
|
u32 val;
|
|
int i;
|
|
|
|
reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_softReset);
|
|
for (i = 0; i < 500; i++) {
|
|
val = reg_read(ohci, OHCI1394_HCControlSet);
|
|
if (!~val)
|
|
return -ENODEV; /* Card was ejected. */
|
|
|
|
if (!(val & OHCI1394_HCControl_softReset))
|
|
return 0;
|
|
|
|
msleep(1);
|
|
}
|
|
|
|
return -EBUSY;
|
|
}
|
|
|
|
static void copy_config_rom(__be32 *dest, const __be32 *src, size_t length)
|
|
{
|
|
size_t size = length * 4;
|
|
|
|
memcpy(dest, src, size);
|
|
if (size < CONFIG_ROM_SIZE)
|
|
memset(&dest[length], 0, CONFIG_ROM_SIZE - size);
|
|
}
|
|
|
|
static int configure_1394a_enhancements(struct fw_ohci *ohci)
|
|
{
|
|
bool enable_1394a;
|
|
int ret, clear, set, offset;
|
|
|
|
/* Check if the driver should configure link and PHY. */
|
|
if (!(reg_read(ohci, OHCI1394_HCControlSet) &
|
|
OHCI1394_HCControl_programPhyEnable))
|
|
return 0;
|
|
|
|
/* Paranoia: check whether the PHY supports 1394a, too. */
|
|
enable_1394a = false;
|
|
ret = read_phy_reg(ohci, 2);
|
|
if (ret < 0)
|
|
return ret;
|
|
if ((ret & PHY_EXTENDED_REGISTERS) == PHY_EXTENDED_REGISTERS) {
|
|
ret = read_paged_phy_reg(ohci, 1, 8);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (ret >= 1)
|
|
enable_1394a = true;
|
|
}
|
|
|
|
if (ohci->quirks & QUIRK_NO_1394A)
|
|
enable_1394a = false;
|
|
|
|
/* Configure PHY and link consistently. */
|
|
if (enable_1394a) {
|
|
clear = 0;
|
|
set = PHY_ENABLE_ACCEL | PHY_ENABLE_MULTI;
|
|
} else {
|
|
clear = PHY_ENABLE_ACCEL | PHY_ENABLE_MULTI;
|
|
set = 0;
|
|
}
|
|
ret = update_phy_reg(ohci, 5, clear, set);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (enable_1394a)
|
|
offset = OHCI1394_HCControlSet;
|
|
else
|
|
offset = OHCI1394_HCControlClear;
|
|
reg_write(ohci, offset, OHCI1394_HCControl_aPhyEnhanceEnable);
|
|
|
|
/* Clean up: configuration has been taken care of. */
|
|
reg_write(ohci, OHCI1394_HCControlClear,
|
|
OHCI1394_HCControl_programPhyEnable);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int probe_tsb41ba3d(struct fw_ohci *ohci)
|
|
{
|
|
/* TI vendor ID = 0x080028, TSB41BA3D product ID = 0x833005 (sic) */
|
|
static const u8 id[] = { 0x08, 0x00, 0x28, 0x83, 0x30, 0x05, };
|
|
int reg, i;
|
|
|
|
reg = read_phy_reg(ohci, 2);
|
|
if (reg < 0)
|
|
return reg;
|
|
if ((reg & PHY_EXTENDED_REGISTERS) != PHY_EXTENDED_REGISTERS)
|
|
return 0;
|
|
|
|
for (i = ARRAY_SIZE(id) - 1; i >= 0; i--) {
|
|
reg = read_paged_phy_reg(ohci, 1, i + 10);
|
|
if (reg < 0)
|
|
return reg;
|
|
if (reg != id[i])
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
static int ohci_enable(struct fw_card *card,
|
|
const __be32 *config_rom, size_t length)
|
|
{
|
|
struct fw_ohci *ohci = fw_ohci(card);
|
|
u32 lps, version, irqs;
|
|
int i, ret;
|
|
|
|
if (software_reset(ohci)) {
|
|
ohci_err(ohci, "failed to reset ohci card\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
/*
|
|
* Now enable LPS, which we need in order to start accessing
|
|
* most of the registers. In fact, on some cards (ALI M5251),
|
|
* accessing registers in the SClk domain without LPS enabled
|
|
* will lock up the machine. Wait 50msec to make sure we have
|
|
* full link enabled. However, with some cards (well, at least
|
|
* a JMicron PCIe card), we have to try again sometimes.
|
|
*
|
|
* TI TSB82AA2 + TSB81BA3(A) cards signal LPS enabled early but
|
|
* cannot actually use the phy at that time. These need tens of
|
|
* millisecods pause between LPS write and first phy access too.
|
|
*/
|
|
|
|
reg_write(ohci, OHCI1394_HCControlSet,
|
|
OHCI1394_HCControl_LPS |
|
|
OHCI1394_HCControl_postedWriteEnable);
|
|
flush_writes(ohci);
|
|
|
|
for (lps = 0, i = 0; !lps && i < 3; i++) {
|
|
msleep(50);
|
|
lps = reg_read(ohci, OHCI1394_HCControlSet) &
|
|
OHCI1394_HCControl_LPS;
|
|
}
|
|
|
|
if (!lps) {
|
|
ohci_err(ohci, "failed to set Link Power Status\n");
|
|
return -EIO;
|
|
}
|
|
|
|
if (ohci->quirks & QUIRK_TI_SLLZ059) {
|
|
ret = probe_tsb41ba3d(ohci);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (ret)
|
|
ohci_notice(ohci, "local TSB41BA3D phy\n");
|
|
else
|
|
ohci->quirks &= ~QUIRK_TI_SLLZ059;
|
|
}
|
|
|
|
reg_write(ohci, OHCI1394_HCControlClear,
|
|
OHCI1394_HCControl_noByteSwapData);
|
|
|
|
reg_write(ohci, OHCI1394_SelfIDBuffer, ohci->self_id_bus);
|
|
reg_write(ohci, OHCI1394_LinkControlSet,
|
|
OHCI1394_LinkControl_cycleTimerEnable |
|
|
OHCI1394_LinkControl_cycleMaster);
|
|
|
|
reg_write(ohci, OHCI1394_ATRetries,
|
|
OHCI1394_MAX_AT_REQ_RETRIES |
|
|
(OHCI1394_MAX_AT_RESP_RETRIES << 4) |
|
|
(OHCI1394_MAX_PHYS_RESP_RETRIES << 8) |
|
|
(200 << 16));
|
|
|
|
ohci->bus_time_running = false;
|
|
|
|
for (i = 0; i < 32; i++)
|
|
if (ohci->ir_context_support & (1 << i))
|
|
reg_write(ohci, OHCI1394_IsoRcvContextControlClear(i),
|
|
IR_CONTEXT_MULTI_CHANNEL_MODE);
|
|
|
|
version = reg_read(ohci, OHCI1394_Version) & 0x00ff00ff;
|
|
if (version >= OHCI_VERSION_1_1) {
|
|
reg_write(ohci, OHCI1394_InitialChannelsAvailableHi,
|
|
0xfffffffe);
|
|
card->broadcast_channel_auto_allocated = true;
|
|
}
|
|
|
|
/* Get implemented bits of the priority arbitration request counter. */
|
|
reg_write(ohci, OHCI1394_FairnessControl, 0x3f);
|
|
ohci->pri_req_max = reg_read(ohci, OHCI1394_FairnessControl) & 0x3f;
|
|
reg_write(ohci, OHCI1394_FairnessControl, 0);
|
|
card->priority_budget_implemented = ohci->pri_req_max != 0;
|
|
|
|
reg_write(ohci, OHCI1394_PhyUpperBound, FW_MAX_PHYSICAL_RANGE >> 16);
|
|
reg_write(ohci, OHCI1394_IntEventClear, ~0);
|
|
reg_write(ohci, OHCI1394_IntMaskClear, ~0);
|
|
|
|
ret = configure_1394a_enhancements(ohci);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Activate link_on bit and contender bit in our self ID packets.*/
|
|
ret = ohci_update_phy_reg(card, 4, 0, PHY_LINK_ACTIVE | PHY_CONTENDER);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/*
|
|
* When the link is not yet enabled, the atomic config rom
|
|
* update mechanism described below in ohci_set_config_rom()
|
|
* is not active. We have to update ConfigRomHeader and
|
|
* BusOptions manually, and the write to ConfigROMmap takes
|
|
* effect immediately. We tie this to the enabling of the
|
|
* link, so we have a valid config rom before enabling - the
|
|
* OHCI requires that ConfigROMhdr and BusOptions have valid
|
|
* values before enabling.
|
|
*
|
|
* However, when the ConfigROMmap is written, some controllers
|
|
* always read back quadlets 0 and 2 from the config rom to
|
|
* the ConfigRomHeader and BusOptions registers on bus reset.
|
|
* They shouldn't do that in this initial case where the link
|
|
* isn't enabled. This means we have to use the same
|
|
* workaround here, setting the bus header to 0 and then write
|
|
* the right values in the bus reset tasklet.
|
|
*/
|
|
|
|
if (config_rom) {
|
|
ohci->next_config_rom =
|
|
dma_alloc_coherent(ohci->card.device, CONFIG_ROM_SIZE,
|
|
&ohci->next_config_rom_bus,
|
|
GFP_KERNEL);
|
|
if (ohci->next_config_rom == NULL)
|
|
return -ENOMEM;
|
|
|
|
copy_config_rom(ohci->next_config_rom, config_rom, length);
|
|
} else {
|
|
/*
|
|
* In the suspend case, config_rom is NULL, which
|
|
* means that we just reuse the old config rom.
|
|
*/
|
|
ohci->next_config_rom = ohci->config_rom;
|
|
ohci->next_config_rom_bus = ohci->config_rom_bus;
|
|
}
|
|
|
|
ohci->next_header = ohci->next_config_rom[0];
|
|
ohci->next_config_rom[0] = 0;
|
|
reg_write(ohci, OHCI1394_ConfigROMhdr, 0);
|
|
reg_write(ohci, OHCI1394_BusOptions,
|
|
be32_to_cpu(ohci->next_config_rom[2]));
|
|
reg_write(ohci, OHCI1394_ConfigROMmap, ohci->next_config_rom_bus);
|
|
|
|
reg_write(ohci, OHCI1394_AsReqFilterHiSet, 0x80000000);
|
|
|
|
irqs = OHCI1394_reqTxComplete | OHCI1394_respTxComplete |
|
|
OHCI1394_RQPkt | OHCI1394_RSPkt |
|
|
OHCI1394_isochTx | OHCI1394_isochRx |
|
|
OHCI1394_postedWriteErr |
|
|
OHCI1394_selfIDComplete |
|
|
OHCI1394_regAccessFail |
|
|
OHCI1394_cycleInconsistent |
|
|
OHCI1394_unrecoverableError |
|
|
OHCI1394_cycleTooLong |
|
|
OHCI1394_masterIntEnable;
|
|
if (param_debug & OHCI_PARAM_DEBUG_BUSRESETS)
|
|
irqs |= OHCI1394_busReset;
|
|
reg_write(ohci, OHCI1394_IntMaskSet, irqs);
|
|
|
|
reg_write(ohci, OHCI1394_HCControlSet,
|
|
OHCI1394_HCControl_linkEnable |
|
|
OHCI1394_HCControl_BIBimageValid);
|
|
|
|
reg_write(ohci, OHCI1394_LinkControlSet,
|
|
OHCI1394_LinkControl_rcvSelfID |
|
|
OHCI1394_LinkControl_rcvPhyPkt);
|
|
|
|
ar_context_run(&ohci->ar_request_ctx);
|
|
ar_context_run(&ohci->ar_response_ctx);
|
|
|
|
flush_writes(ohci);
|
|
|
|
/* We are ready to go, reset bus to finish initialization. */
|
|
fw_schedule_bus_reset(&ohci->card, false, true);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ohci_set_config_rom(struct fw_card *card,
|
|
const __be32 *config_rom, size_t length)
|
|
{
|
|
struct fw_ohci *ohci;
|
|
__be32 *next_config_rom;
|
|
dma_addr_t uninitialized_var(next_config_rom_bus);
|
|
|
|
ohci = fw_ohci(card);
|
|
|
|
/*
|
|
* When the OHCI controller is enabled, the config rom update
|
|
* mechanism is a bit tricky, but easy enough to use. See
|
|
* section 5.5.6 in the OHCI specification.
|
|
*
|
|
* The OHCI controller caches the new config rom address in a
|
|
* shadow register (ConfigROMmapNext) and needs a bus reset
|
|
* for the changes to take place. When the bus reset is
|
|
* detected, the controller loads the new values for the
|
|
* ConfigRomHeader and BusOptions registers from the specified
|
|
* config rom and loads ConfigROMmap from the ConfigROMmapNext
|
|
* shadow register. All automatically and atomically.
|
|
*
|
|
* Now, there's a twist to this story. The automatic load of
|
|
* ConfigRomHeader and BusOptions doesn't honor the
|
|
* noByteSwapData bit, so with a be32 config rom, the
|
|
* controller will load be32 values in to these registers
|
|
* during the atomic update, even on litte endian
|
|
* architectures. The workaround we use is to put a 0 in the
|
|
* header quadlet; 0 is endian agnostic and means that the
|
|
* config rom isn't ready yet. In the bus reset tasklet we
|
|
* then set up the real values for the two registers.
|
|
*
|
|
* We use ohci->lock to avoid racing with the code that sets
|
|
* ohci->next_config_rom to NULL (see bus_reset_work).
|
|
*/
|
|
|
|
next_config_rom =
|
|
dma_alloc_coherent(ohci->card.device, CONFIG_ROM_SIZE,
|
|
&next_config_rom_bus, GFP_KERNEL);
|
|
if (next_config_rom == NULL)
|
|
return -ENOMEM;
|
|
|
|
spin_lock_irq(&ohci->lock);
|
|
|
|
/*
|
|
* If there is not an already pending config_rom update,
|
|
* push our new allocation into the ohci->next_config_rom
|
|
* and then mark the local variable as null so that we
|
|
* won't deallocate the new buffer.
|
|
*
|
|
* OTOH, if there is a pending config_rom update, just
|
|
* use that buffer with the new config_rom data, and
|
|
* let this routine free the unused DMA allocation.
|
|
*/
|
|
|
|
if (ohci->next_config_rom == NULL) {
|
|
ohci->next_config_rom = next_config_rom;
|
|
ohci->next_config_rom_bus = next_config_rom_bus;
|
|
next_config_rom = NULL;
|
|
}
|
|
|
|
copy_config_rom(ohci->next_config_rom, config_rom, length);
|
|
|
|
ohci->next_header = config_rom[0];
|
|
ohci->next_config_rom[0] = 0;
|
|
|
|
reg_write(ohci, OHCI1394_ConfigROMmap, ohci->next_config_rom_bus);
|
|
|
|
spin_unlock_irq(&ohci->lock);
|
|
|
|
/* If we didn't use the DMA allocation, delete it. */
|
|
if (next_config_rom != NULL)
|
|
dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE,
|
|
next_config_rom, next_config_rom_bus);
|
|
|
|
/*
|
|
* Now initiate a bus reset to have the changes take
|
|
* effect. We clean up the old config rom memory and DMA
|
|
* mappings in the bus reset tasklet, since the OHCI
|
|
* controller could need to access it before the bus reset
|
|
* takes effect.
|
|
*/
|
|
|
|
fw_schedule_bus_reset(&ohci->card, true, true);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ohci_send_request(struct fw_card *card, struct fw_packet *packet)
|
|
{
|
|
struct fw_ohci *ohci = fw_ohci(card);
|
|
|
|
at_context_transmit(&ohci->at_request_ctx, packet);
|
|
}
|
|
|
|
static void ohci_send_response(struct fw_card *card, struct fw_packet *packet)
|
|
{
|
|
struct fw_ohci *ohci = fw_ohci(card);
|
|
|
|
at_context_transmit(&ohci->at_response_ctx, packet);
|
|
}
|
|
|
|
static int ohci_cancel_packet(struct fw_card *card, struct fw_packet *packet)
|
|
{
|
|
struct fw_ohci *ohci = fw_ohci(card);
|
|
struct context *ctx = &ohci->at_request_ctx;
|
|
struct driver_data *driver_data = packet->driver_data;
|
|
int ret = -ENOENT;
|
|
|
|
tasklet_disable(&ctx->tasklet);
|
|
|
|
if (packet->ack != 0)
|
|
goto out;
|
|
|
|
if (packet->payload_mapped)
|
|
dma_unmap_single(ohci->card.device, packet->payload_bus,
|
|
packet->payload_length, DMA_TO_DEVICE);
|
|
|
|
log_ar_at_event(ohci, 'T', packet->speed, packet->header, 0x20);
|
|
driver_data->packet = NULL;
|
|
packet->ack = RCODE_CANCELLED;
|
|
packet->callback(packet, &ohci->card, packet->ack);
|
|
ret = 0;
|
|
out:
|
|
tasklet_enable(&ctx->tasklet);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ohci_enable_phys_dma(struct fw_card *card,
|
|
int node_id, int generation)
|
|
{
|
|
struct fw_ohci *ohci = fw_ohci(card);
|
|
unsigned long flags;
|
|
int n, ret = 0;
|
|
|
|
if (param_remote_dma)
|
|
return 0;
|
|
|
|
/*
|
|
* FIXME: Make sure this bitmask is cleared when we clear the busReset
|
|
* interrupt bit. Clear physReqResourceAllBuses on bus reset.
|
|
*/
|
|
|
|
spin_lock_irqsave(&ohci->lock, flags);
|
|
|
|
if (ohci->generation != generation) {
|
|
ret = -ESTALE;
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* Note, if the node ID contains a non-local bus ID, physical DMA is
|
|
* enabled for _all_ nodes on remote buses.
|
|
*/
|
|
|
|
n = (node_id & 0xffc0) == LOCAL_BUS ? node_id & 0x3f : 63;
|
|
if (n < 32)
|
|
reg_write(ohci, OHCI1394_PhyReqFilterLoSet, 1 << n);
|
|
else
|
|
reg_write(ohci, OHCI1394_PhyReqFilterHiSet, 1 << (n - 32));
|
|
|
|
flush_writes(ohci);
|
|
out:
|
|
spin_unlock_irqrestore(&ohci->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static u32 ohci_read_csr(struct fw_card *card, int csr_offset)
|
|
{
|
|
struct fw_ohci *ohci = fw_ohci(card);
|
|
unsigned long flags;
|
|
u32 value;
|
|
|
|
switch (csr_offset) {
|
|
case CSR_STATE_CLEAR:
|
|
case CSR_STATE_SET:
|
|
if (ohci->is_root &&
|
|
(reg_read(ohci, OHCI1394_LinkControlSet) &
|
|
OHCI1394_LinkControl_cycleMaster))
|
|
value = CSR_STATE_BIT_CMSTR;
|
|
else
|
|
value = 0;
|
|
if (ohci->csr_state_setclear_abdicate)
|
|
value |= CSR_STATE_BIT_ABDICATE;
|
|
|
|
return value;
|
|
|
|
case CSR_NODE_IDS:
|
|
return reg_read(ohci, OHCI1394_NodeID) << 16;
|
|
|
|
case CSR_CYCLE_TIME:
|
|
return get_cycle_time(ohci);
|
|
|
|
case CSR_BUS_TIME:
|
|
/*
|
|
* We might be called just after the cycle timer has wrapped
|
|
* around but just before the cycle64Seconds handler, so we
|
|
* better check here, too, if the bus time needs to be updated.
|
|
*/
|
|
spin_lock_irqsave(&ohci->lock, flags);
|
|
value = update_bus_time(ohci);
|
|
spin_unlock_irqrestore(&ohci->lock, flags);
|
|
return value;
|
|
|
|
case CSR_BUSY_TIMEOUT:
|
|
value = reg_read(ohci, OHCI1394_ATRetries);
|
|
return (value >> 4) & 0x0ffff00f;
|
|
|
|
case CSR_PRIORITY_BUDGET:
|
|
return (reg_read(ohci, OHCI1394_FairnessControl) & 0x3f) |
|
|
(ohci->pri_req_max << 8);
|
|
|
|
default:
|
|
WARN_ON(1);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static void ohci_write_csr(struct fw_card *card, int csr_offset, u32 value)
|
|
{
|
|
struct fw_ohci *ohci = fw_ohci(card);
|
|
unsigned long flags;
|
|
|
|
switch (csr_offset) {
|
|
case CSR_STATE_CLEAR:
|
|
if ((value & CSR_STATE_BIT_CMSTR) && ohci->is_root) {
|
|
reg_write(ohci, OHCI1394_LinkControlClear,
|
|
OHCI1394_LinkControl_cycleMaster);
|
|
flush_writes(ohci);
|
|
}
|
|
if (value & CSR_STATE_BIT_ABDICATE)
|
|
ohci->csr_state_setclear_abdicate = false;
|
|
break;
|
|
|
|
case CSR_STATE_SET:
|
|
if ((value & CSR_STATE_BIT_CMSTR) && ohci->is_root) {
|
|
reg_write(ohci, OHCI1394_LinkControlSet,
|
|
OHCI1394_LinkControl_cycleMaster);
|
|
flush_writes(ohci);
|
|
}
|
|
if (value & CSR_STATE_BIT_ABDICATE)
|
|
ohci->csr_state_setclear_abdicate = true;
|
|
break;
|
|
|
|
case CSR_NODE_IDS:
|
|
reg_write(ohci, OHCI1394_NodeID, value >> 16);
|
|
flush_writes(ohci);
|
|
break;
|
|
|
|
case CSR_CYCLE_TIME:
|
|
reg_write(ohci, OHCI1394_IsochronousCycleTimer, value);
|
|
reg_write(ohci, OHCI1394_IntEventSet,
|
|
OHCI1394_cycleInconsistent);
|
|
flush_writes(ohci);
|
|
break;
|
|
|
|
case CSR_BUS_TIME:
|
|
spin_lock_irqsave(&ohci->lock, flags);
|
|
ohci->bus_time = (update_bus_time(ohci) & 0x40) |
|
|
(value & ~0x7f);
|
|
spin_unlock_irqrestore(&ohci->lock, flags);
|
|
break;
|
|
|
|
case CSR_BUSY_TIMEOUT:
|
|
value = (value & 0xf) | ((value & 0xf) << 4) |
|
|
((value & 0xf) << 8) | ((value & 0x0ffff000) << 4);
|
|
reg_write(ohci, OHCI1394_ATRetries, value);
|
|
flush_writes(ohci);
|
|
break;
|
|
|
|
case CSR_PRIORITY_BUDGET:
|
|
reg_write(ohci, OHCI1394_FairnessControl, value & 0x3f);
|
|
flush_writes(ohci);
|
|
break;
|
|
|
|
default:
|
|
WARN_ON(1);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void flush_iso_completions(struct iso_context *ctx)
|
|
{
|
|
ctx->base.callback.sc(&ctx->base, ctx->last_timestamp,
|
|
ctx->header_length, ctx->header,
|
|
ctx->base.callback_data);
|
|
ctx->header_length = 0;
|
|
}
|
|
|
|
static void copy_iso_headers(struct iso_context *ctx, const u32 *dma_hdr)
|
|
{
|
|
u32 *ctx_hdr;
|
|
|
|
if (ctx->header_length + ctx->base.header_size > PAGE_SIZE) {
|
|
if (ctx->base.drop_overflow_headers)
|
|
return;
|
|
flush_iso_completions(ctx);
|
|
}
|
|
|
|
ctx_hdr = ctx->header + ctx->header_length;
|
|
ctx->last_timestamp = (u16)le32_to_cpu((__force __le32)dma_hdr[0]);
|
|
|
|
/*
|
|
* The two iso header quadlets are byteswapped to little
|
|
* endian by the controller, but we want to present them
|
|
* as big endian for consistency with the bus endianness.
|
|
*/
|
|
if (ctx->base.header_size > 0)
|
|
ctx_hdr[0] = swab32(dma_hdr[1]); /* iso packet header */
|
|
if (ctx->base.header_size > 4)
|
|
ctx_hdr[1] = swab32(dma_hdr[0]); /* timestamp */
|
|
if (ctx->base.header_size > 8)
|
|
memcpy(&ctx_hdr[2], &dma_hdr[2], ctx->base.header_size - 8);
|
|
ctx->header_length += ctx->base.header_size;
|
|
}
|
|
|
|
static int handle_ir_packet_per_buffer(struct context *context,
|
|
struct descriptor *d,
|
|
struct descriptor *last)
|
|
{
|
|
struct iso_context *ctx =
|
|
container_of(context, struct iso_context, context);
|
|
struct descriptor *pd;
|
|
u32 buffer_dma;
|
|
|
|
for (pd = d; pd <= last; pd++)
|
|
if (pd->transfer_status)
|
|
break;
|
|
if (pd > last)
|
|
/* Descriptor(s) not done yet, stop iteration */
|
|
return 0;
|
|
|
|
while (!(d->control & cpu_to_le16(DESCRIPTOR_BRANCH_ALWAYS))) {
|
|
d++;
|
|
buffer_dma = le32_to_cpu(d->data_address);
|
|
dma_sync_single_range_for_cpu(context->ohci->card.device,
|
|
buffer_dma & PAGE_MASK,
|
|
buffer_dma & ~PAGE_MASK,
|
|
le16_to_cpu(d->req_count),
|
|
DMA_FROM_DEVICE);
|
|
}
|
|
|
|
copy_iso_headers(ctx, (u32 *) (last + 1));
|
|
|
|
if (last->control & cpu_to_le16(DESCRIPTOR_IRQ_ALWAYS))
|
|
flush_iso_completions(ctx);
|
|
|
|
return 1;
|
|
}
|
|
|
|
/* d == last because each descriptor block is only a single descriptor. */
|
|
static int handle_ir_buffer_fill(struct context *context,
|
|
struct descriptor *d,
|
|
struct descriptor *last)
|
|
{
|
|
struct iso_context *ctx =
|
|
container_of(context, struct iso_context, context);
|
|
unsigned int req_count, res_count, completed;
|
|
u32 buffer_dma;
|
|
|
|
req_count = le16_to_cpu(last->req_count);
|
|
res_count = le16_to_cpu(ACCESS_ONCE(last->res_count));
|
|
completed = req_count - res_count;
|
|
buffer_dma = le32_to_cpu(last->data_address);
|
|
|
|
if (completed > 0) {
|
|
ctx->mc_buffer_bus = buffer_dma;
|
|
ctx->mc_completed = completed;
|
|
}
|
|
|
|
if (res_count != 0)
|
|
/* Descriptor(s) not done yet, stop iteration */
|
|
return 0;
|
|
|
|
dma_sync_single_range_for_cpu(context->ohci->card.device,
|
|
buffer_dma & PAGE_MASK,
|
|
buffer_dma & ~PAGE_MASK,
|
|
completed, DMA_FROM_DEVICE);
|
|
|
|
if (last->control & cpu_to_le16(DESCRIPTOR_IRQ_ALWAYS)) {
|
|
ctx->base.callback.mc(&ctx->base,
|
|
buffer_dma + completed,
|
|
ctx->base.callback_data);
|
|
ctx->mc_completed = 0;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static void flush_ir_buffer_fill(struct iso_context *ctx)
|
|
{
|
|
dma_sync_single_range_for_cpu(ctx->context.ohci->card.device,
|
|
ctx->mc_buffer_bus & PAGE_MASK,
|
|
ctx->mc_buffer_bus & ~PAGE_MASK,
|
|
ctx->mc_completed, DMA_FROM_DEVICE);
|
|
|
|
ctx->base.callback.mc(&ctx->base,
|
|
ctx->mc_buffer_bus + ctx->mc_completed,
|
|
ctx->base.callback_data);
|
|
ctx->mc_completed = 0;
|
|
}
|
|
|
|
static inline void sync_it_packet_for_cpu(struct context *context,
|
|
struct descriptor *pd)
|
|
{
|
|
__le16 control;
|
|
u32 buffer_dma;
|
|
|
|
/* only packets beginning with OUTPUT_MORE* have data buffers */
|
|
if (pd->control & cpu_to_le16(DESCRIPTOR_BRANCH_ALWAYS))
|
|
return;
|
|
|
|
/* skip over the OUTPUT_MORE_IMMEDIATE descriptor */
|
|
pd += 2;
|
|
|
|
/*
|
|
* If the packet has a header, the first OUTPUT_MORE/LAST descriptor's
|
|
* data buffer is in the context program's coherent page and must not
|
|
* be synced.
|
|
*/
|
|
if ((le32_to_cpu(pd->data_address) & PAGE_MASK) ==
|
|
(context->current_bus & PAGE_MASK)) {
|
|
if (pd->control & cpu_to_le16(DESCRIPTOR_BRANCH_ALWAYS))
|
|
return;
|
|
pd++;
|
|
}
|
|
|
|
do {
|
|
buffer_dma = le32_to_cpu(pd->data_address);
|
|
dma_sync_single_range_for_cpu(context->ohci->card.device,
|
|
buffer_dma & PAGE_MASK,
|
|
buffer_dma & ~PAGE_MASK,
|
|
le16_to_cpu(pd->req_count),
|
|
DMA_TO_DEVICE);
|
|
control = pd->control;
|
|
pd++;
|
|
} while (!(control & cpu_to_le16(DESCRIPTOR_BRANCH_ALWAYS)));
|
|
}
|
|
|
|
static int handle_it_packet(struct context *context,
|
|
struct descriptor *d,
|
|
struct descriptor *last)
|
|
{
|
|
struct iso_context *ctx =
|
|
container_of(context, struct iso_context, context);
|
|
struct descriptor *pd;
|
|
__be32 *ctx_hdr;
|
|
|
|
for (pd = d; pd <= last; pd++)
|
|
if (pd->transfer_status)
|
|
break;
|
|
if (pd > last)
|
|
/* Descriptor(s) not done yet, stop iteration */
|
|
return 0;
|
|
|
|
sync_it_packet_for_cpu(context, d);
|
|
|
|
if (ctx->header_length + 4 > PAGE_SIZE) {
|
|
if (ctx->base.drop_overflow_headers)
|
|
return 1;
|
|
flush_iso_completions(ctx);
|
|
}
|
|
|
|
ctx_hdr = ctx->header + ctx->header_length;
|
|
ctx->last_timestamp = le16_to_cpu(last->res_count);
|
|
/* Present this value as big-endian to match the receive code */
|
|
*ctx_hdr = cpu_to_be32((le16_to_cpu(pd->transfer_status) << 16) |
|
|
le16_to_cpu(pd->res_count));
|
|
ctx->header_length += 4;
|
|
|
|
if (last->control & cpu_to_le16(DESCRIPTOR_IRQ_ALWAYS))
|
|
flush_iso_completions(ctx);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static void set_multichannel_mask(struct fw_ohci *ohci, u64 channels)
|
|
{
|
|
u32 hi = channels >> 32, lo = channels;
|
|
|
|
reg_write(ohci, OHCI1394_IRMultiChanMaskHiClear, ~hi);
|
|
reg_write(ohci, OHCI1394_IRMultiChanMaskLoClear, ~lo);
|
|
reg_write(ohci, OHCI1394_IRMultiChanMaskHiSet, hi);
|
|
reg_write(ohci, OHCI1394_IRMultiChanMaskLoSet, lo);
|
|
mmiowb();
|
|
ohci->mc_channels = channels;
|
|
}
|
|
|
|
static struct fw_iso_context *ohci_allocate_iso_context(struct fw_card *card,
|
|
int type, int channel, size_t header_size)
|
|
{
|
|
struct fw_ohci *ohci = fw_ohci(card);
|
|
struct iso_context *uninitialized_var(ctx);
|
|
descriptor_callback_t uninitialized_var(callback);
|
|
u64 *uninitialized_var(channels);
|
|
u32 *uninitialized_var(mask), uninitialized_var(regs);
|
|
int index, ret = -EBUSY;
|
|
|
|
spin_lock_irq(&ohci->lock);
|
|
|
|
switch (type) {
|
|
case FW_ISO_CONTEXT_TRANSMIT:
|
|
mask = &ohci->it_context_mask;
|
|
callback = handle_it_packet;
|
|
index = ffs(*mask) - 1;
|
|
if (index >= 0) {
|
|
*mask &= ~(1 << index);
|
|
regs = OHCI1394_IsoXmitContextBase(index);
|
|
ctx = &ohci->it_context_list[index];
|
|
}
|
|
break;
|
|
|
|
case FW_ISO_CONTEXT_RECEIVE:
|
|
channels = &ohci->ir_context_channels;
|
|
mask = &ohci->ir_context_mask;
|
|
callback = handle_ir_packet_per_buffer;
|
|
index = *channels & 1ULL << channel ? ffs(*mask) - 1 : -1;
|
|
if (index >= 0) {
|
|
*channels &= ~(1ULL << channel);
|
|
*mask &= ~(1 << index);
|
|
regs = OHCI1394_IsoRcvContextBase(index);
|
|
ctx = &ohci->ir_context_list[index];
|
|
}
|
|
break;
|
|
|
|
case FW_ISO_CONTEXT_RECEIVE_MULTICHANNEL:
|
|
mask = &ohci->ir_context_mask;
|
|
callback = handle_ir_buffer_fill;
|
|
index = !ohci->mc_allocated ? ffs(*mask) - 1 : -1;
|
|
if (index >= 0) {
|
|
ohci->mc_allocated = true;
|
|
*mask &= ~(1 << index);
|
|
regs = OHCI1394_IsoRcvContextBase(index);
|
|
ctx = &ohci->ir_context_list[index];
|
|
}
|
|
break;
|
|
|
|
default:
|
|
index = -1;
|
|
ret = -ENOSYS;
|
|
}
|
|
|
|
spin_unlock_irq(&ohci->lock);
|
|
|
|
if (index < 0)
|
|
return ERR_PTR(ret);
|
|
|
|
memset(ctx, 0, sizeof(*ctx));
|
|
ctx->header_length = 0;
|
|
ctx->header = (void *) __get_free_page(GFP_KERNEL);
|
|
if (ctx->header == NULL) {
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
ret = context_init(&ctx->context, ohci, regs, callback);
|
|
if (ret < 0)
|
|
goto out_with_header;
|
|
|
|
if (type == FW_ISO_CONTEXT_RECEIVE_MULTICHANNEL) {
|
|
set_multichannel_mask(ohci, 0);
|
|
ctx->mc_completed = 0;
|
|
}
|
|
|
|
return &ctx->base;
|
|
|
|
out_with_header:
|
|
free_page((unsigned long)ctx->header);
|
|
out:
|
|
spin_lock_irq(&ohci->lock);
|
|
|
|
switch (type) {
|
|
case FW_ISO_CONTEXT_RECEIVE:
|
|
*channels |= 1ULL << channel;
|
|
break;
|
|
|
|
case FW_ISO_CONTEXT_RECEIVE_MULTICHANNEL:
|
|
ohci->mc_allocated = false;
|
|
break;
|
|
}
|
|
*mask |= 1 << index;
|
|
|
|
spin_unlock_irq(&ohci->lock);
|
|
|
|
return ERR_PTR(ret);
|
|
}
|
|
|
|
static int ohci_start_iso(struct fw_iso_context *base,
|
|
s32 cycle, u32 sync, u32 tags)
|
|
{
|
|
struct iso_context *ctx = container_of(base, struct iso_context, base);
|
|
struct fw_ohci *ohci = ctx->context.ohci;
|
|
u32 control = IR_CONTEXT_ISOCH_HEADER, match;
|
|
int index;
|
|
|
|
/* the controller cannot start without any queued packets */
|
|
if (ctx->context.last->branch_address == 0)
|
|
return -ENODATA;
|
|
|
|
switch (ctx->base.type) {
|
|
case FW_ISO_CONTEXT_TRANSMIT:
|
|
index = ctx - ohci->it_context_list;
|
|
match = 0;
|
|
if (cycle >= 0)
|
|
match = IT_CONTEXT_CYCLE_MATCH_ENABLE |
|
|
(cycle & 0x7fff) << 16;
|
|
|
|
reg_write(ohci, OHCI1394_IsoXmitIntEventClear, 1 << index);
|
|
reg_write(ohci, OHCI1394_IsoXmitIntMaskSet, 1 << index);
|
|
context_run(&ctx->context, match);
|
|
break;
|
|
|
|
case FW_ISO_CONTEXT_RECEIVE_MULTICHANNEL:
|
|
control |= IR_CONTEXT_BUFFER_FILL|IR_CONTEXT_MULTI_CHANNEL_MODE;
|
|
/* fall through */
|
|
case FW_ISO_CONTEXT_RECEIVE:
|
|
index = ctx - ohci->ir_context_list;
|
|
match = (tags << 28) | (sync << 8) | ctx->base.channel;
|
|
if (cycle >= 0) {
|
|
match |= (cycle & 0x07fff) << 12;
|
|
control |= IR_CONTEXT_CYCLE_MATCH_ENABLE;
|
|
}
|
|
|
|
reg_write(ohci, OHCI1394_IsoRecvIntEventClear, 1 << index);
|
|
reg_write(ohci, OHCI1394_IsoRecvIntMaskSet, 1 << index);
|
|
reg_write(ohci, CONTEXT_MATCH(ctx->context.regs), match);
|
|
context_run(&ctx->context, control);
|
|
|
|
ctx->sync = sync;
|
|
ctx->tags = tags;
|
|
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ohci_stop_iso(struct fw_iso_context *base)
|
|
{
|
|
struct fw_ohci *ohci = fw_ohci(base->card);
|
|
struct iso_context *ctx = container_of(base, struct iso_context, base);
|
|
int index;
|
|
|
|
switch (ctx->base.type) {
|
|
case FW_ISO_CONTEXT_TRANSMIT:
|
|
index = ctx - ohci->it_context_list;
|
|
reg_write(ohci, OHCI1394_IsoXmitIntMaskClear, 1 << index);
|
|
break;
|
|
|
|
case FW_ISO_CONTEXT_RECEIVE:
|
|
case FW_ISO_CONTEXT_RECEIVE_MULTICHANNEL:
|
|
index = ctx - ohci->ir_context_list;
|
|
reg_write(ohci, OHCI1394_IsoRecvIntMaskClear, 1 << index);
|
|
break;
|
|
}
|
|
flush_writes(ohci);
|
|
context_stop(&ctx->context);
|
|
tasklet_kill(&ctx->context.tasklet);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ohci_free_iso_context(struct fw_iso_context *base)
|
|
{
|
|
struct fw_ohci *ohci = fw_ohci(base->card);
|
|
struct iso_context *ctx = container_of(base, struct iso_context, base);
|
|
unsigned long flags;
|
|
int index;
|
|
|
|
ohci_stop_iso(base);
|
|
context_release(&ctx->context);
|
|
free_page((unsigned long)ctx->header);
|
|
|
|
spin_lock_irqsave(&ohci->lock, flags);
|
|
|
|
switch (base->type) {
|
|
case FW_ISO_CONTEXT_TRANSMIT:
|
|
index = ctx - ohci->it_context_list;
|
|
ohci->it_context_mask |= 1 << index;
|
|
break;
|
|
|
|
case FW_ISO_CONTEXT_RECEIVE:
|
|
index = ctx - ohci->ir_context_list;
|
|
ohci->ir_context_mask |= 1 << index;
|
|
ohci->ir_context_channels |= 1ULL << base->channel;
|
|
break;
|
|
|
|
case FW_ISO_CONTEXT_RECEIVE_MULTICHANNEL:
|
|
index = ctx - ohci->ir_context_list;
|
|
ohci->ir_context_mask |= 1 << index;
|
|
ohci->ir_context_channels |= ohci->mc_channels;
|
|
ohci->mc_channels = 0;
|
|
ohci->mc_allocated = false;
|
|
break;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&ohci->lock, flags);
|
|
}
|
|
|
|
static int ohci_set_iso_channels(struct fw_iso_context *base, u64 *channels)
|
|
{
|
|
struct fw_ohci *ohci = fw_ohci(base->card);
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
switch (base->type) {
|
|
case FW_ISO_CONTEXT_RECEIVE_MULTICHANNEL:
|
|
|
|
spin_lock_irqsave(&ohci->lock, flags);
|
|
|
|
/* Don't allow multichannel to grab other contexts' channels. */
|
|
if (~ohci->ir_context_channels & ~ohci->mc_channels & *channels) {
|
|
*channels = ohci->ir_context_channels;
|
|
ret = -EBUSY;
|
|
} else {
|
|
set_multichannel_mask(ohci, *channels);
|
|
ret = 0;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&ohci->lock, flags);
|
|
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static void ohci_resume_iso_dma(struct fw_ohci *ohci)
|
|
{
|
|
int i;
|
|
struct iso_context *ctx;
|
|
|
|
for (i = 0 ; i < ohci->n_ir ; i++) {
|
|
ctx = &ohci->ir_context_list[i];
|
|
if (ctx->context.running)
|
|
ohci_start_iso(&ctx->base, 0, ctx->sync, ctx->tags);
|
|
}
|
|
|
|
for (i = 0 ; i < ohci->n_it ; i++) {
|
|
ctx = &ohci->it_context_list[i];
|
|
if (ctx->context.running)
|
|
ohci_start_iso(&ctx->base, 0, ctx->sync, ctx->tags);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
static int queue_iso_transmit(struct iso_context *ctx,
|
|
struct fw_iso_packet *packet,
|
|
struct fw_iso_buffer *buffer,
|
|
unsigned long payload)
|
|
{
|
|
struct descriptor *d, *last, *pd;
|
|
struct fw_iso_packet *p;
|
|
__le32 *header;
|
|
dma_addr_t d_bus, page_bus;
|
|
u32 z, header_z, payload_z, irq;
|
|
u32 payload_index, payload_end_index, next_page_index;
|
|
int page, end_page, i, length, offset;
|
|
|
|
p = packet;
|
|
payload_index = payload;
|
|
|
|
if (p->skip)
|
|
z = 1;
|
|
else
|
|
z = 2;
|
|
if (p->header_length > 0)
|
|
z++;
|
|
|
|
/* Determine the first page the payload isn't contained in. */
|
|
end_page = PAGE_ALIGN(payload_index + p->payload_length) >> PAGE_SHIFT;
|
|
if (p->payload_length > 0)
|
|
payload_z = end_page - (payload_index >> PAGE_SHIFT);
|
|
else
|
|
payload_z = 0;
|
|
|
|
z += payload_z;
|
|
|
|
/* Get header size in number of descriptors. */
|
|
header_z = DIV_ROUND_UP(p->header_length, sizeof(*d));
|
|
|
|
d = context_get_descriptors(&ctx->context, z + header_z, &d_bus);
|
|
if (d == NULL)
|
|
return -ENOMEM;
|
|
|
|
if (!p->skip) {
|
|
d[0].control = cpu_to_le16(DESCRIPTOR_KEY_IMMEDIATE);
|
|
d[0].req_count = cpu_to_le16(8);
|
|
/*
|
|
* Link the skip address to this descriptor itself. This causes
|
|
* a context to skip a cycle whenever lost cycles or FIFO
|
|
* overruns occur, without dropping the data. The application
|
|
* should then decide whether this is an error condition or not.
|
|
* FIXME: Make the context's cycle-lost behaviour configurable?
|
|
*/
|
|
d[0].branch_address = cpu_to_le32(d_bus | z);
|
|
|
|
header = (__le32 *) &d[1];
|
|
header[0] = cpu_to_le32(IT_HEADER_SY(p->sy) |
|
|
IT_HEADER_TAG(p->tag) |
|
|
IT_HEADER_TCODE(TCODE_STREAM_DATA) |
|
|
IT_HEADER_CHANNEL(ctx->base.channel) |
|
|
IT_HEADER_SPEED(ctx->base.speed));
|
|
header[1] =
|
|
cpu_to_le32(IT_HEADER_DATA_LENGTH(p->header_length +
|
|
p->payload_length));
|
|
}
|
|
|
|
if (p->header_length > 0) {
|
|
d[2].req_count = cpu_to_le16(p->header_length);
|
|
d[2].data_address = cpu_to_le32(d_bus + z * sizeof(*d));
|
|
memcpy(&d[z], p->header, p->header_length);
|
|
}
|
|
|
|
pd = d + z - payload_z;
|
|
payload_end_index = payload_index + p->payload_length;
|
|
for (i = 0; i < payload_z; i++) {
|
|
page = payload_index >> PAGE_SHIFT;
|
|
offset = payload_index & ~PAGE_MASK;
|
|
next_page_index = (page + 1) << PAGE_SHIFT;
|
|
length =
|
|
min(next_page_index, payload_end_index) - payload_index;
|
|
pd[i].req_count = cpu_to_le16(length);
|
|
|
|
page_bus = page_private(buffer->pages[page]);
|
|
pd[i].data_address = cpu_to_le32(page_bus + offset);
|
|
|
|
dma_sync_single_range_for_device(ctx->context.ohci->card.device,
|
|
page_bus, offset, length,
|
|
DMA_TO_DEVICE);
|
|
|
|
payload_index += length;
|
|
}
|
|
|
|
if (p->interrupt)
|
|
irq = DESCRIPTOR_IRQ_ALWAYS;
|
|
else
|
|
irq = DESCRIPTOR_NO_IRQ;
|
|
|
|
last = z == 2 ? d : d + z - 1;
|
|
last->control |= cpu_to_le16(DESCRIPTOR_OUTPUT_LAST |
|
|
DESCRIPTOR_STATUS |
|
|
DESCRIPTOR_BRANCH_ALWAYS |
|
|
irq);
|
|
|
|
context_append(&ctx->context, d, z, header_z);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int queue_iso_packet_per_buffer(struct iso_context *ctx,
|
|
struct fw_iso_packet *packet,
|
|
struct fw_iso_buffer *buffer,
|
|
unsigned long payload)
|
|
{
|
|
struct device *device = ctx->context.ohci->card.device;
|
|
struct descriptor *d, *pd;
|
|
dma_addr_t d_bus, page_bus;
|
|
u32 z, header_z, rest;
|
|
int i, j, length;
|
|
int page, offset, packet_count, header_size, payload_per_buffer;
|
|
|
|
/*
|
|
* The OHCI controller puts the isochronous header and trailer in the
|
|
* buffer, so we need at least 8 bytes.
|
|
*/
|
|
packet_count = packet->header_length / ctx->base.header_size;
|
|
header_size = max(ctx->base.header_size, (size_t)8);
|
|
|
|
/* Get header size in number of descriptors. */
|
|
header_z = DIV_ROUND_UP(header_size, sizeof(*d));
|
|
page = payload >> PAGE_SHIFT;
|
|
offset = payload & ~PAGE_MASK;
|
|
payload_per_buffer = packet->payload_length / packet_count;
|
|
|
|
for (i = 0; i < packet_count; i++) {
|
|
/* d points to the header descriptor */
|
|
z = DIV_ROUND_UP(payload_per_buffer + offset, PAGE_SIZE) + 1;
|
|
d = context_get_descriptors(&ctx->context,
|
|
z + header_z, &d_bus);
|
|
if (d == NULL)
|
|
return -ENOMEM;
|
|
|
|
d->control = cpu_to_le16(DESCRIPTOR_STATUS |
|
|
DESCRIPTOR_INPUT_MORE);
|
|
if (packet->skip && i == 0)
|
|
d->control |= cpu_to_le16(DESCRIPTOR_WAIT);
|
|
d->req_count = cpu_to_le16(header_size);
|
|
d->res_count = d->req_count;
|
|
d->transfer_status = 0;
|
|
d->data_address = cpu_to_le32(d_bus + (z * sizeof(*d)));
|
|
|
|
rest = payload_per_buffer;
|
|
pd = d;
|
|
for (j = 1; j < z; j++) {
|
|
pd++;
|
|
pd->control = cpu_to_le16(DESCRIPTOR_STATUS |
|
|
DESCRIPTOR_INPUT_MORE);
|
|
|
|
if (offset + rest < PAGE_SIZE)
|
|
length = rest;
|
|
else
|
|
length = PAGE_SIZE - offset;
|
|
pd->req_count = cpu_to_le16(length);
|
|
pd->res_count = pd->req_count;
|
|
pd->transfer_status = 0;
|
|
|
|
page_bus = page_private(buffer->pages[page]);
|
|
pd->data_address = cpu_to_le32(page_bus + offset);
|
|
|
|
dma_sync_single_range_for_device(device, page_bus,
|
|
offset, length,
|
|
DMA_FROM_DEVICE);
|
|
|
|
offset = (offset + length) & ~PAGE_MASK;
|
|
rest -= length;
|
|
if (offset == 0)
|
|
page++;
|
|
}
|
|
pd->control = cpu_to_le16(DESCRIPTOR_STATUS |
|
|
DESCRIPTOR_INPUT_LAST |
|
|
DESCRIPTOR_BRANCH_ALWAYS);
|
|
if (packet->interrupt && i == packet_count - 1)
|
|
pd->control |= cpu_to_le16(DESCRIPTOR_IRQ_ALWAYS);
|
|
|
|
context_append(&ctx->context, d, z, header_z);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int queue_iso_buffer_fill(struct iso_context *ctx,
|
|
struct fw_iso_packet *packet,
|
|
struct fw_iso_buffer *buffer,
|
|
unsigned long payload)
|
|
{
|
|
struct descriptor *d;
|
|
dma_addr_t d_bus, page_bus;
|
|
int page, offset, rest, z, i, length;
|
|
|
|
page = payload >> PAGE_SHIFT;
|
|
offset = payload & ~PAGE_MASK;
|
|
rest = packet->payload_length;
|
|
|
|
/* We need one descriptor for each page in the buffer. */
|
|
z = DIV_ROUND_UP(offset + rest, PAGE_SIZE);
|
|
|
|
if (WARN_ON(offset & 3 || rest & 3 || page + z > buffer->page_count))
|
|
return -EFAULT;
|
|
|
|
for (i = 0; i < z; i++) {
|
|
d = context_get_descriptors(&ctx->context, 1, &d_bus);
|
|
if (d == NULL)
|
|
return -ENOMEM;
|
|
|
|
d->control = cpu_to_le16(DESCRIPTOR_INPUT_MORE |
|
|
DESCRIPTOR_BRANCH_ALWAYS);
|
|
if (packet->skip && i == 0)
|
|
d->control |= cpu_to_le16(DESCRIPTOR_WAIT);
|
|
if (packet->interrupt && i == z - 1)
|
|
d->control |= cpu_to_le16(DESCRIPTOR_IRQ_ALWAYS);
|
|
|
|
if (offset + rest < PAGE_SIZE)
|
|
length = rest;
|
|
else
|
|
length = PAGE_SIZE - offset;
|
|
d->req_count = cpu_to_le16(length);
|
|
d->res_count = d->req_count;
|
|
d->transfer_status = 0;
|
|
|
|
page_bus = page_private(buffer->pages[page]);
|
|
d->data_address = cpu_to_le32(page_bus + offset);
|
|
|
|
dma_sync_single_range_for_device(ctx->context.ohci->card.device,
|
|
page_bus, offset, length,
|
|
DMA_FROM_DEVICE);
|
|
|
|
rest -= length;
|
|
offset = 0;
|
|
page++;
|
|
|
|
context_append(&ctx->context, d, 1, 0);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ohci_queue_iso(struct fw_iso_context *base,
|
|
struct fw_iso_packet *packet,
|
|
struct fw_iso_buffer *buffer,
|
|
unsigned long payload)
|
|
{
|
|
struct iso_context *ctx = container_of(base, struct iso_context, base);
|
|
unsigned long flags;
|
|
int ret = -ENOSYS;
|
|
|
|
spin_lock_irqsave(&ctx->context.ohci->lock, flags);
|
|
switch (base->type) {
|
|
case FW_ISO_CONTEXT_TRANSMIT:
|
|
ret = queue_iso_transmit(ctx, packet, buffer, payload);
|
|
break;
|
|
case FW_ISO_CONTEXT_RECEIVE:
|
|
ret = queue_iso_packet_per_buffer(ctx, packet, buffer, payload);
|
|
break;
|
|
case FW_ISO_CONTEXT_RECEIVE_MULTICHANNEL:
|
|
ret = queue_iso_buffer_fill(ctx, packet, buffer, payload);
|
|
break;
|
|
}
|
|
spin_unlock_irqrestore(&ctx->context.ohci->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void ohci_flush_queue_iso(struct fw_iso_context *base)
|
|
{
|
|
struct context *ctx =
|
|
&container_of(base, struct iso_context, base)->context;
|
|
|
|
reg_write(ctx->ohci, CONTROL_SET(ctx->regs), CONTEXT_WAKE);
|
|
}
|
|
|
|
static int ohci_flush_iso_completions(struct fw_iso_context *base)
|
|
{
|
|
struct iso_context *ctx = container_of(base, struct iso_context, base);
|
|
int ret = 0;
|
|
|
|
tasklet_disable(&ctx->context.tasklet);
|
|
|
|
if (!test_and_set_bit_lock(0, &ctx->flushing_completions)) {
|
|
context_tasklet((unsigned long)&ctx->context);
|
|
|
|
switch (base->type) {
|
|
case FW_ISO_CONTEXT_TRANSMIT:
|
|
case FW_ISO_CONTEXT_RECEIVE:
|
|
if (ctx->header_length != 0)
|
|
flush_iso_completions(ctx);
|
|
break;
|
|
case FW_ISO_CONTEXT_RECEIVE_MULTICHANNEL:
|
|
if (ctx->mc_completed != 0)
|
|
flush_ir_buffer_fill(ctx);
|
|
break;
|
|
default:
|
|
ret = -ENOSYS;
|
|
}
|
|
|
|
clear_bit_unlock(0, &ctx->flushing_completions);
|
|
smp_mb__after_atomic();
|
|
}
|
|
|
|
tasklet_enable(&ctx->context.tasklet);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct fw_card_driver ohci_driver = {
|
|
.enable = ohci_enable,
|
|
.read_phy_reg = ohci_read_phy_reg,
|
|
.update_phy_reg = ohci_update_phy_reg,
|
|
.set_config_rom = ohci_set_config_rom,
|
|
.send_request = ohci_send_request,
|
|
.send_response = ohci_send_response,
|
|
.cancel_packet = ohci_cancel_packet,
|
|
.enable_phys_dma = ohci_enable_phys_dma,
|
|
.read_csr = ohci_read_csr,
|
|
.write_csr = ohci_write_csr,
|
|
|
|
.allocate_iso_context = ohci_allocate_iso_context,
|
|
.free_iso_context = ohci_free_iso_context,
|
|
.set_iso_channels = ohci_set_iso_channels,
|
|
.queue_iso = ohci_queue_iso,
|
|
.flush_queue_iso = ohci_flush_queue_iso,
|
|
.flush_iso_completions = ohci_flush_iso_completions,
|
|
.start_iso = ohci_start_iso,
|
|
.stop_iso = ohci_stop_iso,
|
|
};
|
|
|
|
#ifdef CONFIG_PPC_PMAC
|
|
static void pmac_ohci_on(struct pci_dev *dev)
|
|
{
|
|
if (machine_is(powermac)) {
|
|
struct device_node *ofn = pci_device_to_OF_node(dev);
|
|
|
|
if (ofn) {
|
|
pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, ofn, 0, 1);
|
|
pmac_call_feature(PMAC_FTR_1394_ENABLE, ofn, 0, 1);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void pmac_ohci_off(struct pci_dev *dev)
|
|
{
|
|
if (machine_is(powermac)) {
|
|
struct device_node *ofn = pci_device_to_OF_node(dev);
|
|
|
|
if (ofn) {
|
|
pmac_call_feature(PMAC_FTR_1394_ENABLE, ofn, 0, 0);
|
|
pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, ofn, 0, 0);
|
|
}
|
|
}
|
|
}
|
|
#else
|
|
static inline void pmac_ohci_on(struct pci_dev *dev) {}
|
|
static inline void pmac_ohci_off(struct pci_dev *dev) {}
|
|
#endif /* CONFIG_PPC_PMAC */
|
|
|
|
static int pci_probe(struct pci_dev *dev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
struct fw_ohci *ohci;
|
|
u32 bus_options, max_receive, link_speed, version;
|
|
u64 guid;
|
|
int i, err;
|
|
size_t size;
|
|
|
|
if (dev->vendor == PCI_VENDOR_ID_PINNACLE_SYSTEMS) {
|
|
dev_err(&dev->dev, "Pinnacle MovieBoard is not yet supported\n");
|
|
return -ENOSYS;
|
|
}
|
|
|
|
ohci = kzalloc(sizeof(*ohci), GFP_KERNEL);
|
|
if (ohci == NULL) {
|
|
err = -ENOMEM;
|
|
goto fail;
|
|
}
|
|
|
|
fw_card_initialize(&ohci->card, &ohci_driver, &dev->dev);
|
|
|
|
pmac_ohci_on(dev);
|
|
|
|
err = pci_enable_device(dev);
|
|
if (err) {
|
|
dev_err(&dev->dev, "failed to enable OHCI hardware\n");
|
|
goto fail_free;
|
|
}
|
|
|
|
pci_set_master(dev);
|
|
pci_write_config_dword(dev, OHCI1394_PCI_HCI_Control, 0);
|
|
pci_set_drvdata(dev, ohci);
|
|
|
|
spin_lock_init(&ohci->lock);
|
|
mutex_init(&ohci->phy_reg_mutex);
|
|
|
|
INIT_WORK(&ohci->bus_reset_work, bus_reset_work);
|
|
|
|
if (!(pci_resource_flags(dev, 0) & IORESOURCE_MEM) ||
|
|
pci_resource_len(dev, 0) < OHCI1394_REGISTER_SIZE) {
|
|
ohci_err(ohci, "invalid MMIO resource\n");
|
|
err = -ENXIO;
|
|
goto fail_disable;
|
|
}
|
|
|
|
err = pci_request_region(dev, 0, ohci_driver_name);
|
|
if (err) {
|
|
ohci_err(ohci, "MMIO resource unavailable\n");
|
|
goto fail_disable;
|
|
}
|
|
|
|
ohci->registers = pci_iomap(dev, 0, OHCI1394_REGISTER_SIZE);
|
|
if (ohci->registers == NULL) {
|
|
ohci_err(ohci, "failed to remap registers\n");
|
|
err = -ENXIO;
|
|
goto fail_iomem;
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ohci_quirks); i++)
|
|
if ((ohci_quirks[i].vendor == dev->vendor) &&
|
|
(ohci_quirks[i].device == (unsigned short)PCI_ANY_ID ||
|
|
ohci_quirks[i].device == dev->device) &&
|
|
(ohci_quirks[i].revision == (unsigned short)PCI_ANY_ID ||
|
|
ohci_quirks[i].revision >= dev->revision)) {
|
|
ohci->quirks = ohci_quirks[i].flags;
|
|
break;
|
|
}
|
|
if (param_quirks)
|
|
ohci->quirks = param_quirks;
|
|
|
|
/*
|
|
* Because dma_alloc_coherent() allocates at least one page,
|
|
* we save space by using a common buffer for the AR request/
|
|
* response descriptors and the self IDs buffer.
|
|
*/
|
|
BUILD_BUG_ON(AR_BUFFERS * sizeof(struct descriptor) > PAGE_SIZE/4);
|
|
BUILD_BUG_ON(SELF_ID_BUF_SIZE > PAGE_SIZE/2);
|
|
ohci->misc_buffer = dma_alloc_coherent(ohci->card.device,
|
|
PAGE_SIZE,
|
|
&ohci->misc_buffer_bus,
|
|
GFP_KERNEL);
|
|
if (!ohci->misc_buffer) {
|
|
err = -ENOMEM;
|
|
goto fail_iounmap;
|
|
}
|
|
|
|
err = ar_context_init(&ohci->ar_request_ctx, ohci, 0,
|
|
OHCI1394_AsReqRcvContextControlSet);
|
|
if (err < 0)
|
|
goto fail_misc_buf;
|
|
|
|
err = ar_context_init(&ohci->ar_response_ctx, ohci, PAGE_SIZE/4,
|
|
OHCI1394_AsRspRcvContextControlSet);
|
|
if (err < 0)
|
|
goto fail_arreq_ctx;
|
|
|
|
err = context_init(&ohci->at_request_ctx, ohci,
|
|
OHCI1394_AsReqTrContextControlSet, handle_at_packet);
|
|
if (err < 0)
|
|
goto fail_arrsp_ctx;
|
|
|
|
err = context_init(&ohci->at_response_ctx, ohci,
|
|
OHCI1394_AsRspTrContextControlSet, handle_at_packet);
|
|
if (err < 0)
|
|
goto fail_atreq_ctx;
|
|
|
|
reg_write(ohci, OHCI1394_IsoRecvIntMaskSet, ~0);
|
|
ohci->ir_context_channels = ~0ULL;
|
|
ohci->ir_context_support = reg_read(ohci, OHCI1394_IsoRecvIntMaskSet);
|
|
reg_write(ohci, OHCI1394_IsoRecvIntMaskClear, ~0);
|
|
ohci->ir_context_mask = ohci->ir_context_support;
|
|
ohci->n_ir = hweight32(ohci->ir_context_mask);
|
|
size = sizeof(struct iso_context) * ohci->n_ir;
|
|
ohci->ir_context_list = kzalloc(size, GFP_KERNEL);
|
|
|
|
reg_write(ohci, OHCI1394_IsoXmitIntMaskSet, ~0);
|
|
ohci->it_context_support = reg_read(ohci, OHCI1394_IsoXmitIntMaskSet);
|
|
/* JMicron JMB38x often shows 0 at first read, just ignore it */
|
|
if (!ohci->it_context_support) {
|
|
ohci_notice(ohci, "overriding IsoXmitIntMask\n");
|
|
ohci->it_context_support = 0xf;
|
|
}
|
|
reg_write(ohci, OHCI1394_IsoXmitIntMaskClear, ~0);
|
|
ohci->it_context_mask = ohci->it_context_support;
|
|
ohci->n_it = hweight32(ohci->it_context_mask);
|
|
size = sizeof(struct iso_context) * ohci->n_it;
|
|
ohci->it_context_list = kzalloc(size, GFP_KERNEL);
|
|
|
|
if (ohci->it_context_list == NULL || ohci->ir_context_list == NULL) {
|
|
err = -ENOMEM;
|
|
goto fail_contexts;
|
|
}
|
|
|
|
ohci->self_id = ohci->misc_buffer + PAGE_SIZE/2;
|
|
ohci->self_id_bus = ohci->misc_buffer_bus + PAGE_SIZE/2;
|
|
|
|
bus_options = reg_read(ohci, OHCI1394_BusOptions);
|
|
max_receive = (bus_options >> 12) & 0xf;
|
|
link_speed = bus_options & 0x7;
|
|
guid = ((u64) reg_read(ohci, OHCI1394_GUIDHi) << 32) |
|
|
reg_read(ohci, OHCI1394_GUIDLo);
|
|
|
|
if (!(ohci->quirks & QUIRK_NO_MSI))
|
|
pci_enable_msi(dev);
|
|
if (request_irq(dev->irq, irq_handler,
|
|
pci_dev_msi_enabled(dev) ? 0 : IRQF_SHARED,
|
|
ohci_driver_name, ohci)) {
|
|
ohci_err(ohci, "failed to allocate interrupt %d\n", dev->irq);
|
|
err = -EIO;
|
|
goto fail_msi;
|
|
}
|
|
|
|
err = fw_card_add(&ohci->card, max_receive, link_speed, guid);
|
|
if (err)
|
|
goto fail_irq;
|
|
|
|
version = reg_read(ohci, OHCI1394_Version) & 0x00ff00ff;
|
|
ohci_notice(ohci,
|
|
"added OHCI v%x.%x device as card %d, "
|
|
"%d IR + %d IT contexts, quirks 0x%x%s\n",
|
|
version >> 16, version & 0xff, ohci->card.index,
|
|
ohci->n_ir, ohci->n_it, ohci->quirks,
|
|
reg_read(ohci, OHCI1394_PhyUpperBound) ?
|
|
", physUB" : "");
|
|
|
|
return 0;
|
|
|
|
fail_irq:
|
|
free_irq(dev->irq, ohci);
|
|
fail_msi:
|
|
pci_disable_msi(dev);
|
|
fail_contexts:
|
|
kfree(ohci->ir_context_list);
|
|
kfree(ohci->it_context_list);
|
|
context_release(&ohci->at_response_ctx);
|
|
fail_atreq_ctx:
|
|
context_release(&ohci->at_request_ctx);
|
|
fail_arrsp_ctx:
|
|
ar_context_release(&ohci->ar_response_ctx);
|
|
fail_arreq_ctx:
|
|
ar_context_release(&ohci->ar_request_ctx);
|
|
fail_misc_buf:
|
|
dma_free_coherent(ohci->card.device, PAGE_SIZE,
|
|
ohci->misc_buffer, ohci->misc_buffer_bus);
|
|
fail_iounmap:
|
|
pci_iounmap(dev, ohci->registers);
|
|
fail_iomem:
|
|
pci_release_region(dev, 0);
|
|
fail_disable:
|
|
pci_disable_device(dev);
|
|
fail_free:
|
|
kfree(ohci);
|
|
pmac_ohci_off(dev);
|
|
fail:
|
|
return err;
|
|
}
|
|
|
|
static void pci_remove(struct pci_dev *dev)
|
|
{
|
|
struct fw_ohci *ohci = pci_get_drvdata(dev);
|
|
|
|
/*
|
|
* If the removal is happening from the suspend state, LPS won't be
|
|
* enabled and host registers (eg., IntMaskClear) won't be accessible.
|
|
*/
|
|
if (reg_read(ohci, OHCI1394_HCControlSet) & OHCI1394_HCControl_LPS) {
|
|
reg_write(ohci, OHCI1394_IntMaskClear, ~0);
|
|
flush_writes(ohci);
|
|
}
|
|
cancel_work_sync(&ohci->bus_reset_work);
|
|
fw_core_remove_card(&ohci->card);
|
|
|
|
/*
|
|
* FIXME: Fail all pending packets here, now that the upper
|
|
* layers can't queue any more.
|
|
*/
|
|
|
|
software_reset(ohci);
|
|
free_irq(dev->irq, ohci);
|
|
|
|
if (ohci->next_config_rom && ohci->next_config_rom != ohci->config_rom)
|
|
dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE,
|
|
ohci->next_config_rom, ohci->next_config_rom_bus);
|
|
if (ohci->config_rom)
|
|
dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE,
|
|
ohci->config_rom, ohci->config_rom_bus);
|
|
ar_context_release(&ohci->ar_request_ctx);
|
|
ar_context_release(&ohci->ar_response_ctx);
|
|
dma_free_coherent(ohci->card.device, PAGE_SIZE,
|
|
ohci->misc_buffer, ohci->misc_buffer_bus);
|
|
context_release(&ohci->at_request_ctx);
|
|
context_release(&ohci->at_response_ctx);
|
|
kfree(ohci->it_context_list);
|
|
kfree(ohci->ir_context_list);
|
|
pci_disable_msi(dev);
|
|
pci_iounmap(dev, ohci->registers);
|
|
pci_release_region(dev, 0);
|
|
pci_disable_device(dev);
|
|
kfree(ohci);
|
|
pmac_ohci_off(dev);
|
|
|
|
dev_notice(&dev->dev, "removed fw-ohci device\n");
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int pci_suspend(struct pci_dev *dev, pm_message_t state)
|
|
{
|
|
struct fw_ohci *ohci = pci_get_drvdata(dev);
|
|
int err;
|
|
|
|
software_reset(ohci);
|
|
err = pci_save_state(dev);
|
|
if (err) {
|
|
ohci_err(ohci, "pci_save_state failed\n");
|
|
return err;
|
|
}
|
|
err = pci_set_power_state(dev, pci_choose_state(dev, state));
|
|
if (err)
|
|
ohci_err(ohci, "pci_set_power_state failed with %d\n", err);
|
|
pmac_ohci_off(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pci_resume(struct pci_dev *dev)
|
|
{
|
|
struct fw_ohci *ohci = pci_get_drvdata(dev);
|
|
int err;
|
|
|
|
pmac_ohci_on(dev);
|
|
pci_set_power_state(dev, PCI_D0);
|
|
pci_restore_state(dev);
|
|
err = pci_enable_device(dev);
|
|
if (err) {
|
|
ohci_err(ohci, "pci_enable_device failed\n");
|
|
return err;
|
|
}
|
|
|
|
/* Some systems don't setup GUID register on resume from ram */
|
|
if (!reg_read(ohci, OHCI1394_GUIDLo) &&
|
|
!reg_read(ohci, OHCI1394_GUIDHi)) {
|
|
reg_write(ohci, OHCI1394_GUIDLo, (u32)ohci->card.guid);
|
|
reg_write(ohci, OHCI1394_GUIDHi, (u32)(ohci->card.guid >> 32));
|
|
}
|
|
|
|
err = ohci_enable(&ohci->card, NULL, 0);
|
|
if (err)
|
|
return err;
|
|
|
|
ohci_resume_iso_dma(ohci);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static const struct pci_device_id pci_table[] = {
|
|
{ PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_FIREWIRE_OHCI, ~0) },
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, pci_table);
|
|
|
|
static struct pci_driver fw_ohci_pci_driver = {
|
|
.name = ohci_driver_name,
|
|
.id_table = pci_table,
|
|
.probe = pci_probe,
|
|
.remove = pci_remove,
|
|
#ifdef CONFIG_PM
|
|
.resume = pci_resume,
|
|
.suspend = pci_suspend,
|
|
#endif
|
|
};
|
|
|
|
static int __init fw_ohci_init(void)
|
|
{
|
|
selfid_workqueue = alloc_workqueue(KBUILD_MODNAME, WQ_MEM_RECLAIM, 0);
|
|
if (!selfid_workqueue)
|
|
return -ENOMEM;
|
|
|
|
return pci_register_driver(&fw_ohci_pci_driver);
|
|
}
|
|
|
|
static void __exit fw_ohci_cleanup(void)
|
|
{
|
|
pci_unregister_driver(&fw_ohci_pci_driver);
|
|
destroy_workqueue(selfid_workqueue);
|
|
}
|
|
|
|
module_init(fw_ohci_init);
|
|
module_exit(fw_ohci_cleanup);
|
|
|
|
MODULE_AUTHOR("Kristian Hoegsberg <krh@bitplanet.net>");
|
|
MODULE_DESCRIPTION("Driver for PCI OHCI IEEE1394 controllers");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
/* Provide a module alias so root-on-sbp2 initrds don't break. */
|
|
MODULE_ALIAS("ohci1394");
|