linux/drivers/usb
Mathias Nyman 1ac7db6333 usb: hub: Allow reset retry for USB2 devices on connect bounce
If the connect status change is set during reset signaling, but
the status remains connected just retry port reset.

This solves an issue with connecting a 90W HP Thunderbolt 3 dock
with a Lenovo Carbon x1 (5th generation) which causes a 30min loop
of a high speed device being re-discovererd before usb ports starts
working.

[...]
[ 389.023845] usb 3-1: new high-speed USB device number 55 using xhci_hcd
[ 389.491841] usb 3-1: new high-speed USB device number 56 using xhci_hcd
[ 389.959928] usb 3-1: new high-speed USB device number 57 using xhci_hcd
[...]

This is caused by a high speed device that doesn't successfully go to the
enabled state after the second port reset. Instead the connection bounces
(connected, with connect status change), bailing out completely from
enumeration just to restart from scratch.

Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1716332

Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-19 09:49:11 +02:00
..
atm usb: atm: ueagle-atm: constify attribute_group structures. 2017-08-10 11:31:28 -07:00
c67x00 c67x00-hcd: constify hc_driver structures 2017-07-30 07:26:52 -07:00
chipidea usb: chipidea: usb2: check memory allocation failure 2017-08-28 11:44:39 +02:00
class usb: cdc_acm: Add quirk for Elatec TWN3 2017-10-17 11:04:32 +02:00
common usb: common: use of_property_read_bool() 2017-08-28 11:39:31 +02:00
core usb: hub: Allow reset retry for USB2 devices on connect bounce 2017-10-19 09:49:11 +02:00
dwc2 usb: dwc2: skip L2 state of hcd if controller work in device mode 2017-08-15 14:18:55 +03:00
dwc3 usb: dwc3: of-simple: Add compatible for Spreadtrum SC9860 platform 2017-09-28 12:41:56 +03:00
early usb/early: Remove trace_printk() callers in xhci-dbc 2017-06-13 10:54:40 +02:00
gadget usb: gadget: configfs: Fix memory leak of interface directory data 2017-10-11 13:14:37 +03:00
host usb: xhci: Handle error condition in xhci_stop_device() 2017-10-17 10:38:13 +02:00
image USB: microtek: remove unneeded DRIVER_VERSION macro 2017-07-22 15:56:53 +02:00
isp1760 usb: isp1760: compress return logic into one line 2017-07-17 13:13:44 +02:00
misc usb: usbtest: fix NULL pointer dereference 2017-10-11 13:15:11 +03:00
mon
mtu3 usb: changes for v4.14 merge window 2017-08-22 13:16:06 -07:00
musb usb: musb: sunxi: Explicitly release USB PHY on exit 2017-10-17 11:42:51 +02:00
phy usb: phy: tegra: Fix phy suspend for UDC 2017-10-11 13:13:07 +03:00
renesas_usbhs usb: renesas_usbhs: Fix DMAC sequence for receiving zero-length packet 2017-10-11 13:13:52 +03:00
serial USB: serial: metro-usb: add MS7820 device id 2017-10-16 09:34:58 +02:00
storage USB: uas: fix bug in handling of alternate settings 2017-09-22 18:29:00 +02:00
typec usb: typec: include linux/device.h in ucsi.h 2017-07-17 13:11:56 +02:00
usbip usbip: vhci-hcd: make vhci_hc_driver const 2017-08-31 18:08:47 +02:00
wusbcore usb: wusbcore: dev-sysfs: constify attribute_group structures. 2017-08-10 11:31:27 -07:00
Kconfig usb: USB Type-C connector class 2017-03-23 13:48:44 +01:00
Makefile USB patches for 4.12-rc1 2017-05-04 18:03:51 -07:00
README
usb-skeleton.c USB: usb-skeleton: refactor endpoint retrieval 2017-03-23 13:54:08 +01:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.