6417f03132
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was implemented. We can safely remove it, because the kernel has grown to have many more reliable mechanisms to determine if device is supported or not. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
246 lines
6.1 KiB
C
246 lines
6.1 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/* Low-level parallel port routines for the Amiga built-in port
|
|
*
|
|
* Author: Joerg Dorchain <joerg@dorchain.net>
|
|
*
|
|
* This is a complete rewrite of the code, but based heaviy upon the old
|
|
* lp_intern. code.
|
|
*
|
|
* The built-in Amiga parallel port provides one port at a fixed address
|
|
* with 8 bidirectional data lines (D0 - D7) and 3 bidirectional status
|
|
* lines (BUSY, POUT, SEL), 1 output control line /STROBE (raised automatically
|
|
* in hardware when the data register is accessed), and 1 input control line
|
|
* /ACK, able to cause an interrupt, but both not directly settable by
|
|
* software.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/parport.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <asm/setup.h>
|
|
#include <asm/amigahw.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/io.h>
|
|
#include <asm/amigaints.h>
|
|
|
|
#undef DEBUG
|
|
|
|
static void amiga_write_data(struct parport *p, unsigned char data)
|
|
{
|
|
pr_debug("write_data %c\n", data);
|
|
/* Triggers also /STROBE. This behavior cannot be changed */
|
|
ciaa.prb = data;
|
|
mb();
|
|
}
|
|
|
|
static unsigned char amiga_read_data(struct parport *p)
|
|
{
|
|
/* Triggers also /STROBE. This behavior cannot be changed */
|
|
return ciaa.prb;
|
|
}
|
|
|
|
static unsigned char control_amiga_to_pc(unsigned char control)
|
|
{
|
|
return PARPORT_CONTROL_SELECT |
|
|
PARPORT_CONTROL_AUTOFD | PARPORT_CONTROL_STROBE;
|
|
/* fake value: interrupt enable, select in, no reset,
|
|
no autolf, no strobe - seems to be closest the wiring diagram */
|
|
}
|
|
|
|
static void amiga_write_control(struct parport *p, unsigned char control)
|
|
{
|
|
pr_debug("write_control %02x\n", control);
|
|
/* No implementation possible */
|
|
}
|
|
|
|
static unsigned char amiga_read_control( struct parport *p)
|
|
{
|
|
pr_debug("read_control\n");
|
|
return control_amiga_to_pc(0);
|
|
}
|
|
|
|
static unsigned char amiga_frob_control( struct parport *p, unsigned char mask, unsigned char val)
|
|
{
|
|
unsigned char old;
|
|
|
|
pr_debug("frob_control mask %02x, value %02x\n", mask, val);
|
|
old = amiga_read_control(p);
|
|
amiga_write_control(p, (old & ~mask) ^ val);
|
|
return old;
|
|
}
|
|
|
|
static unsigned char status_amiga_to_pc(unsigned char status)
|
|
{
|
|
unsigned char ret = PARPORT_STATUS_BUSY | PARPORT_STATUS_ACK | PARPORT_STATUS_ERROR;
|
|
|
|
if (status & 1) /* Busy */
|
|
ret &= ~PARPORT_STATUS_BUSY;
|
|
if (status & 2) /* PaperOut */
|
|
ret |= PARPORT_STATUS_PAPEROUT;
|
|
if (status & 4) /* Selected */
|
|
ret |= PARPORT_STATUS_SELECT;
|
|
/* the rest is not connected or handled autonomously in hardware */
|
|
|
|
return ret;
|
|
}
|
|
|
|
static unsigned char amiga_read_status(struct parport *p)
|
|
{
|
|
unsigned char status;
|
|
|
|
status = status_amiga_to_pc(ciab.pra & 7);
|
|
pr_debug("read_status %02x\n", status);
|
|
return status;
|
|
}
|
|
|
|
static void amiga_enable_irq(struct parport *p)
|
|
{
|
|
enable_irq(IRQ_AMIGA_CIAA_FLG);
|
|
}
|
|
|
|
static void amiga_disable_irq(struct parport *p)
|
|
{
|
|
disable_irq(IRQ_AMIGA_CIAA_FLG);
|
|
}
|
|
|
|
static void amiga_data_forward(struct parport *p)
|
|
{
|
|
pr_debug("forward\n");
|
|
ciaa.ddrb = 0xff; /* all pins output */
|
|
mb();
|
|
}
|
|
|
|
static void amiga_data_reverse(struct parport *p)
|
|
{
|
|
pr_debug("reverse\n");
|
|
ciaa.ddrb = 0; /* all pins input */
|
|
mb();
|
|
}
|
|
|
|
static void amiga_init_state(struct pardevice *dev, struct parport_state *s)
|
|
{
|
|
s->u.amiga.data = 0;
|
|
s->u.amiga.datadir = 255;
|
|
s->u.amiga.status = 0;
|
|
s->u.amiga.statusdir = 0;
|
|
}
|
|
|
|
static void amiga_save_state(struct parport *p, struct parport_state *s)
|
|
{
|
|
mb();
|
|
s->u.amiga.data = ciaa.prb;
|
|
s->u.amiga.datadir = ciaa.ddrb;
|
|
s->u.amiga.status = ciab.pra & 7;
|
|
s->u.amiga.statusdir = ciab.ddra & 7;
|
|
mb();
|
|
}
|
|
|
|
static void amiga_restore_state(struct parport *p, struct parport_state *s)
|
|
{
|
|
mb();
|
|
ciaa.prb = s->u.amiga.data;
|
|
ciaa.ddrb = s->u.amiga.datadir;
|
|
ciab.pra |= (ciab.pra & 0xf8) | s->u.amiga.status;
|
|
ciab.ddra |= (ciab.ddra & 0xf8) | s->u.amiga.statusdir;
|
|
mb();
|
|
}
|
|
|
|
static struct parport_operations pp_amiga_ops = {
|
|
.write_data = amiga_write_data,
|
|
.read_data = amiga_read_data,
|
|
|
|
.write_control = amiga_write_control,
|
|
.read_control = amiga_read_control,
|
|
.frob_control = amiga_frob_control,
|
|
|
|
.read_status = amiga_read_status,
|
|
|
|
.enable_irq = amiga_enable_irq,
|
|
.disable_irq = amiga_disable_irq,
|
|
|
|
.data_forward = amiga_data_forward,
|
|
.data_reverse = amiga_data_reverse,
|
|
|
|
.init_state = amiga_init_state,
|
|
.save_state = amiga_save_state,
|
|
.restore_state = amiga_restore_state,
|
|
|
|
.epp_write_data = parport_ieee1284_epp_write_data,
|
|
.epp_read_data = parport_ieee1284_epp_read_data,
|
|
.epp_write_addr = parport_ieee1284_epp_write_addr,
|
|
.epp_read_addr = parport_ieee1284_epp_read_addr,
|
|
|
|
.ecp_write_data = parport_ieee1284_ecp_write_data,
|
|
.ecp_read_data = parport_ieee1284_ecp_read_data,
|
|
.ecp_write_addr = parport_ieee1284_ecp_write_addr,
|
|
|
|
.compat_write_data = parport_ieee1284_write_compat,
|
|
.nibble_read_data = parport_ieee1284_read_nibble,
|
|
.byte_read_data = parport_ieee1284_read_byte,
|
|
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
/* ----------- Initialisation code --------------------------------- */
|
|
|
|
static int __init amiga_parallel_probe(struct platform_device *pdev)
|
|
{
|
|
struct parport *p;
|
|
int err;
|
|
|
|
ciaa.ddrb = 0xff;
|
|
ciab.ddra &= 0xf8;
|
|
mb();
|
|
|
|
p = parport_register_port((unsigned long)&ciaa.prb, IRQ_AMIGA_CIAA_FLG,
|
|
PARPORT_DMA_NONE, &pp_amiga_ops);
|
|
if (!p)
|
|
return -EBUSY;
|
|
|
|
err = request_irq(IRQ_AMIGA_CIAA_FLG, parport_irq_handler, 0, p->name,
|
|
p);
|
|
if (err)
|
|
goto out_irq;
|
|
|
|
pr_info("%s: Amiga built-in port using irq\n", p->name);
|
|
/* XXX: set operating mode */
|
|
parport_announce_port(p);
|
|
|
|
platform_set_drvdata(pdev, p);
|
|
|
|
return 0;
|
|
|
|
out_irq:
|
|
parport_put_port(p);
|
|
return err;
|
|
}
|
|
|
|
static int __exit amiga_parallel_remove(struct platform_device *pdev)
|
|
{
|
|
struct parport *port = platform_get_drvdata(pdev);
|
|
|
|
parport_remove_port(port);
|
|
if (port->irq != PARPORT_IRQ_NONE)
|
|
free_irq(IRQ_AMIGA_CIAA_FLG, port);
|
|
parport_put_port(port);
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver amiga_parallel_driver = {
|
|
.remove = __exit_p(amiga_parallel_remove),
|
|
.driver = {
|
|
.name = "amiga-parallel",
|
|
},
|
|
};
|
|
|
|
module_platform_driver_probe(amiga_parallel_driver, amiga_parallel_probe);
|
|
|
|
MODULE_AUTHOR("Joerg Dorchain <joerg@dorchain.net>");
|
|
MODULE_DESCRIPTION("Parport Driver for Amiga builtin Port");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:amiga-parallel");
|