bba047f158
The Marvell SD8978 (aka NXP IW416) uses identical registers as SD8987, so reuse the existing mwifiex_reg_sd8987 definition. Note that mwifiex_reg_sd8977 and mwifiex_reg_sd8997 are likewise identical, save for the fw_dump_ctrl register: They define it as 0xf0 whereas mwifiex_reg_sd8987 defines it as 0xf9. I've verified that 0xf9 is the correct value on SD8978. NXP's out-of-tree driver uses 0xf9 for all of them, so there's a chance that 0xf0 is not correct in the mwifiex_reg_sd8977 and mwifiex_reg_sd8997 definitions. I cannot test that for lack of hardware, hence am leaving it as is. NXP has only released a firmware which runs Bluetooth over UART. Perhaps Bluetooth over SDIO is unsupported by this chipset. Consequently, only an "sdiouart" firmware image is referenced, not an alternative "sdsd" image. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/536b4f17a72ca460ad1b07045757043fb0778988.1674827105.git.lukas@wunner.de