iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
bbc780132d
linux/drivers/clk/sunxi-ng/ccu-sun8i-r40.c
Samuel Holland c8c525b06f
clk: sunxi-ng: Allow drivers to be built as modules 
While it is useful to build all of the CCU drivers at once, only 1-3 of
them will be loaded at a time, or possibly none of them if the kernel is
booted on a non-sunxi platform. These CCU drivers are relatively large;
32-bit drivers have 30-50k of data each, while the 64-bit ones are
50-75k due to the increased pointer overhead. About half of that data
comes from relocations. Let's allow the user to build these drivers as
modules so only the necessary data is loaded.

As a first step, convert the CCUs that are already platform drivers.

When the drivers are built as modules, normally the file name becomes
the module name. However, the current file names are inconsistent with
the <platform>-<peripheral> name used everywhere else: the devicetree
bindings, the platform driver names, and the Kconfig symbols. Use
Makfile logic to rename the modules so they follow the usual pattern.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20211119033338.25486-3-samuel@sholland.org
2021-11-22 10:02:21 +01:00

1379 lines
44 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.io>
*/
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include "ccu_common.h"
#include "ccu_reset.h"
#include "ccu_div.h"
#include "ccu_gate.h"
#include "ccu_mp.h"
#include "ccu_mult.h"
#include "ccu_nk.h"
#include "ccu_nkm.h"
#include "ccu_nkmp.h"
#include "ccu_nm.h"
#include "ccu_phase.h"
#include "ccu-sun8i-r40.h"
/* TODO: The result of N*K is required to be in [10, 88] range. */
static struct ccu_nkmp pll_cpu_clk = {
.enable = BIT(31),
.lock = BIT(28),
.n = _SUNXI_CCU_MULT(8, 5),
.k = _SUNXI_CCU_MULT(4, 2),
.m = _SUNXI_CCU_DIV(0, 2),
.p = _SUNXI_CCU_DIV_MAX(16, 2, 4),
.common = {
.reg = 0x000,
.hw.init = CLK_HW_INIT("pll-cpu",
"osc24M",
&ccu_nkmp_ops,
CLK_SET_RATE_UNGATE),
},
};
/*
* The Audio PLL is supposed to have 4 outputs: 3 fixed factors from
* the base (2x, 4x and 8x), and one variable divider (the one true
* pll audio).
*
* With sigma-delta modulation for fractional-N on the audio PLL,
* we have to use specific dividers. This means the variable divider
* can no longer be used, as the audio codec requests the exact clock
* rates we support through this mechanism. So we now hard code the
* variable divider to 1. This means the clock rates will no longer
* match the clock names.
*/
#define SUN8I_R40_PLL_AUDIO_REG 0x008
static struct ccu_sdm_setting pll_audio_sdm_table[] = {
{ .rate = 22579200, .pattern = 0xc0010d84, .m = 8, .n = 7 },
{ .rate = 24576000, .pattern = 0xc000ac02, .m = 14, .n = 14 },
};
static SUNXI_CCU_NM_WITH_SDM_GATE_LOCK(pll_audio_base_clk, "pll-audio-base",
"osc24M", 0x008,
8, 7, /* N */
0, 5, /* M */
pll_audio_sdm_table, BIT(24),
0x284, BIT(31),
BIT(31), /* gate */
BIT(28), /* lock */
CLK_SET_RATE_UNGATE);
static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN_MAX(pll_video0_clk, "pll-video0",
"osc24M", 0x0010,
192000000, /* Minimum rate */
1008000000, /* Maximum rate */
8, 7, /* N */
0, 4, /* M */
BIT(24), /* frac enable */
BIT(25), /* frac select */
270000000, /* frac rate 0 */
297000000, /* frac rate 1 */
BIT(31), /* gate */
BIT(28), /* lock */
CLK_SET_RATE_UNGATE);
/* TODO: The result of N/M is required to be in [8, 25] range. */
static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve",
"osc24M", 0x0018,
8, 7, /* N */
0, 4, /* M */
BIT(24), /* frac enable */
BIT(25), /* frac select */
270000000, /* frac rate 0 */
297000000, /* frac rate 1 */
BIT(31), /* gate */
BIT(28), /* lock */
CLK_SET_RATE_UNGATE);
/* TODO: The result of N*K is required to be in [10, 77] range. */
static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_ddr0_clk, "pll-ddr0",
"osc24M", 0x020,
8, 5, /* N */
4, 2, /* K */
0, 2, /* M */
BIT(31), /* gate */
BIT(28), /* lock */
CLK_SET_RATE_UNGATE);
/* TODO: The result of N*K is required to be in [21, 58] range. */
static struct ccu_nk pll_periph0_clk = {
.enable = BIT(31),
.lock = BIT(28),
.n = _SUNXI_CCU_MULT(8, 5),
.k = _SUNXI_CCU_MULT(4, 2),
.fixed_post_div = 2,
.common = {
.reg = 0x028,
.features = CCU_FEATURE_FIXED_POSTDIV,
.hw.init = CLK_HW_INIT("pll-periph0", "osc24M",
&ccu_nk_ops,
CLK_SET_RATE_UNGATE),
},
};
static struct ccu_div pll_periph0_sata_clk = {
.enable = BIT(24),
.div = _SUNXI_CCU_DIV(0, 2),
/*
* The formula of pll-periph0 (1x) is 24MHz*N*K/2, and the formula
* of pll-periph0-sata is 24MHz*N*K/M/6, so the postdiv here is
* 6/2 = 3.
*/
.fixed_post_div = 3,
.common = {
.reg = 0x028,
.features = CCU_FEATURE_FIXED_POSTDIV,
.hw.init = CLK_HW_INIT("pll-periph0-sata",
"pll-periph0",
&ccu_div_ops, 0),
},
};
/* TODO: The result of N*K is required to be in [21, 58] range. */
static struct ccu_nk pll_periph1_clk = {
.enable = BIT(31),
.lock = BIT(28),
.n = _SUNXI_CCU_MULT(8, 5),
.k = _SUNXI_CCU_MULT(4, 2),
.fixed_post_div = 2,
.common = {
.reg = 0x02c,
.features = CCU_FEATURE_FIXED_POSTDIV,
.hw.init = CLK_HW_INIT("pll-periph1", "osc24M",
&ccu_nk_ops,
CLK_SET_RATE_UNGATE),
},
};
static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN_MAX(pll_video1_clk, "pll-video1",
"osc24M", 0x030,
192000000, /* Minimum rate */
1008000000, /* Maximum rate */
8, 7, /* N */
0, 4, /* M */
BIT(24), /* frac enable */
BIT(25), /* frac select */
270000000, /* frac rate 0 */
297000000, /* frac rate 1 */
BIT(31), /* gate */
BIT(28), /* lock */
CLK_SET_RATE_UNGATE);
static struct ccu_nkm pll_sata_clk = {
.enable = BIT(31),
.lock = BIT(28),
.n = _SUNXI_CCU_MULT(8, 5),
.k = _SUNXI_CCU_MULT(4, 2),
.m = _SUNXI_CCU_DIV(0, 2),
.fixed_post_div = 6,
.common = {
.reg = 0x034,
.features = CCU_FEATURE_FIXED_POSTDIV,
.hw.init = CLK_HW_INIT("pll-sata", "osc24M",
&ccu_nkm_ops,
CLK_SET_RATE_UNGATE),
},
};
static const char * const pll_sata_out_parents[] = { "pll-sata",
"pll-periph0-sata" };
static SUNXI_CCU_MUX_WITH_GATE(pll_sata_out_clk, "pll-sata-out",
pll_sata_out_parents, 0x034,
30, 1, /* mux */
BIT(14), /* gate */
CLK_SET_RATE_PARENT);
/* TODO: The result of N/M is required to be in [8, 25] range. */
static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_gpu_clk, "pll-gpu",
"osc24M", 0x038,
8, 7, /* N */
0, 4, /* M */
BIT(24), /* frac enable */
BIT(25), /* frac select */
270000000, /* frac rate 0 */
297000000, /* frac rate 1 */
BIT(31), /* gate */
BIT(28), /* lock */
CLK_SET_RATE_UNGATE);
/*
* The MIPI PLL has 2 modes: "MIPI" and "HDMI".
*
* The MIPI mode is a standard NKM-style clock. The HDMI mode is an
* integer / fractional clock with switchable multipliers and dividers.
* This is not supported here. We hardcode the PLL to MIPI mode.
*
* TODO: In the MIPI mode, M/N is required to be equal or lesser than 3,
* which cannot be implemented now.
*/
#define SUN8I_R40_PLL_MIPI_REG 0x040
static const char * const pll_mipi_parents[] = { "pll-video0" };
static struct ccu_nkm pll_mipi_clk = {
.enable = BIT(31) | BIT(23) | BIT(22),
.lock = BIT(28),
.n = _SUNXI_CCU_MULT(8, 4),
.k = _SUNXI_CCU_MULT_MIN(4, 2, 2),
.m = _SUNXI_CCU_DIV(0, 4),
.mux = _SUNXI_CCU_MUX(21, 1),
.common = {
.reg = 0x040,
.hw.init = CLK_HW_INIT_PARENTS("pll-mipi",
pll_mipi_parents,
&ccu_nkm_ops,
CLK_SET_RATE_UNGATE)
},
};
/* TODO: The result of N/M is required to be in [8, 25] range. */
static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_de_clk, "pll-de",
"osc24M", 0x048,
8, 7, /* N */
0, 4, /* M */
BIT(24), /* frac enable */
BIT(25), /* frac select */
270000000, /* frac rate 0 */
297000000, /* frac rate 1 */
BIT(31), /* gate */
BIT(28), /* lock */
CLK_SET_RATE_UNGATE);
/* TODO: The N factor is required to be in [16, 75] range. */
static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_ddr1_clk, "pll-ddr1",
"osc24M", 0x04c,
8, 7, /* N */
0, 2, /* M */
BIT(31), /* gate */
BIT(28), /* lock */
CLK_SET_RATE_UNGATE);
static const char * const cpu_parents[] = { "osc32k", "osc24M",
"pll-cpu", "pll-cpu" };
static SUNXI_CCU_MUX(cpu_clk, "cpu", cpu_parents,
0x050, 16, 2, CLK_IS_CRITICAL | CLK_SET_RATE_PARENT);
static SUNXI_CCU_M(axi_clk, "axi", "cpu", 0x050, 0, 2, 0);
static const char * const ahb1_parents[] = { "osc32k", "osc24M",
"axi", "pll-periph0" };
static const struct ccu_mux_var_prediv ahb1_predivs[] = {
{ .index = 3, .shift = 6, .width = 2 },
};
static struct ccu_div ahb1_clk = {
.div = _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
.mux = {
.shift = 12,
.width = 2,
.var_predivs = ahb1_predivs,
.n_var_predivs = ARRAY_SIZE(ahb1_predivs),
},
.common = {
.reg = 0x054,
.features = CCU_FEATURE_VARIABLE_PREDIV,
.hw.init = CLK_HW_INIT_PARENTS("ahb1",
ahb1_parents,
&ccu_div_ops,
0),
},
};
static struct clk_div_table apb1_div_table[] = {
{ .val = 0, .div = 2 },
{ .val = 1, .div = 2 },
{ .val = 2, .div = 4 },
{ .val = 3, .div = 8 },
{ /* Sentinel */ },
};
static SUNXI_CCU_DIV_TABLE(apb1_clk, "apb1", "ahb1",
0x054, 8, 2, apb1_div_table, 0);
static const char * const apb2_parents[] = { "osc32k", "osc24M",
"pll-periph0-2x",
"pll-periph0-2x" };
static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", apb2_parents, 0x058,
0, 5, /* M */
16, 2, /* P */
24, 2, /* mux */
0);
static SUNXI_CCU_GATE(bus_mipi_dsi_clk, "bus-mipi-dsi", "ahb1",
0x060, BIT(1), 0);
static SUNXI_CCU_GATE(bus_ce_clk, "bus-ce", "ahb1",
0x060, BIT(5), 0);
static SUNXI_CCU_GATE(bus_dma_clk, "bus-dma", "ahb1",
0x060, BIT(6), 0);
static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb1",
0x060, BIT(8), 0);
static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb1",
0x060, BIT(9), 0);
static SUNXI_CCU_GATE(bus_mmc2_clk, "bus-mmc2", "ahb1",
0x060, BIT(10), 0);
static SUNXI_CCU_GATE(bus_mmc3_clk, "bus-mmc3", "ahb1",
0x060, BIT(11), 0);
static SUNXI_CCU_GATE(bus_nand_clk, "bus-nand", "ahb1",
0x060, BIT(13), 0);
static SUNXI_CCU_GATE(bus_dram_clk, "bus-dram", "ahb1",
0x060, BIT(14), 0);
static SUNXI_CCU_GATE(bus_emac_clk, "bus-emac", "ahb1",
0x060, BIT(17), 0);
static SUNXI_CCU_GATE(bus_ts_clk, "bus-ts", "ahb1",
0x060, BIT(18), 0);
static SUNXI_CCU_GATE(bus_hstimer_clk, "bus-hstimer", "ahb1",
0x060, BIT(19), 0);
static SUNXI_CCU_GATE(bus_spi0_clk, "bus-spi0", "ahb1",
0x060, BIT(20), 0);
static SUNXI_CCU_GATE(bus_spi1_clk, "bus-spi1", "ahb1",
0x060, BIT(21), 0);
static SUNXI_CCU_GATE(bus_spi2_clk, "bus-spi2", "ahb1",
0x060, BIT(22), 0);
static SUNXI_CCU_GATE(bus_spi3_clk, "bus-spi3", "ahb1",
0x060, BIT(23), 0);
static SUNXI_CCU_GATE(bus_sata_clk, "bus-sata", "ahb1",
0x060, BIT(24), 0);
static SUNXI_CCU_GATE(bus_otg_clk, "bus-otg", "ahb1",
0x060, BIT(25), 0);
static SUNXI_CCU_GATE(bus_ehci0_clk, "bus-ehci0", "ahb1",
0x060, BIT(26), 0);
static SUNXI_CCU_GATE(bus_ehci1_clk, "bus-ehci1", "ahb1",
0x060, BIT(27), 0);
static SUNXI_CCU_GATE(bus_ehci2_clk, "bus-ehci2", "ahb1",
0x060, BIT(28), 0);
static SUNXI_CCU_GATE(bus_ohci0_clk, "bus-ohci0", "ahb1",
0x060, BIT(29), 0);
static SUNXI_CCU_GATE(bus_ohci1_clk, "bus-ohci1", "ahb1",
0x060, BIT(30), 0);
static SUNXI_CCU_GATE(bus_ohci2_clk, "bus-ohci2", "ahb1",
0x060, BIT(31), 0);
static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "ahb1",
0x064, BIT(0), 0);
static SUNXI_CCU_GATE(bus_mp_clk, "bus-mp", "ahb1",
0x064, BIT(2), 0);
static SUNXI_CCU_GATE(bus_deinterlace_clk, "bus-deinterlace", "ahb1",
0x064, BIT(5), 0);
static SUNXI_CCU_GATE(bus_csi0_clk, "bus-csi0", "ahb1",
0x064, BIT(8), 0);
static SUNXI_CCU_GATE(bus_csi1_clk, "bus-csi1", "ahb1",
0x064, BIT(9), 0);
static SUNXI_CCU_GATE(bus_hdmi0_clk, "bus-hdmi0", "ahb1",
0x064, BIT(10), 0);
static SUNXI_CCU_GATE(bus_hdmi1_clk, "bus-hdmi1", "ahb1",
0x064, BIT(11), 0);
static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "ahb1",
0x064, BIT(12), 0);
static SUNXI_CCU_GATE(bus_tve0_clk, "bus-tve0", "ahb1",
0x064, BIT(13), 0);
static SUNXI_CCU_GATE(bus_tve1_clk, "bus-tve1", "ahb1",
0x064, BIT(14), 0);
static SUNXI_CCU_GATE(bus_tve_top_clk, "bus-tve-top", "ahb1",
0x064, BIT(15), 0);
static SUNXI_CCU_GATE(bus_gmac_clk, "bus-gmac", "ahb1",
0x064, BIT(17), 0);
static SUNXI_CCU_GATE(bus_gpu_clk, "bus-gpu", "ahb1",
0x064, BIT(20), 0);
static SUNXI_CCU_GATE(bus_tvd0_clk, "bus-tvd0", "ahb1",
0x064, BIT(21), 0);
static SUNXI_CCU_GATE(bus_tvd1_clk, "bus-tvd1", "ahb1",
0x064, BIT(22), 0);
static SUNXI_CCU_GATE(bus_tvd2_clk, "bus-tvd2", "ahb1",
0x064, BIT(23), 0);
static SUNXI_CCU_GATE(bus_tvd3_clk, "bus-tvd3", "ahb1",
0x064, BIT(24), 0);
static SUNXI_CCU_GATE(bus_tvd_top_clk, "bus-tvd-top", "ahb1",
0x064, BIT(25), 0);
static SUNXI_CCU_GATE(bus_tcon_lcd0_clk, "bus-tcon-lcd0", "ahb1",
0x064, BIT(26), 0);
static SUNXI_CCU_GATE(bus_tcon_lcd1_clk, "bus-tcon-lcd1", "ahb1",
0x064, BIT(27), 0);
static SUNXI_CCU_GATE(bus_tcon_tv0_clk, "bus-tcon-tv0", "ahb1",
0x064, BIT(28), 0);
static SUNXI_CCU_GATE(bus_tcon_tv1_clk, "bus-tcon-tv1", "ahb1",
0x064, BIT(29), 0);
static SUNXI_CCU_GATE(bus_tcon_top_clk, "bus-tcon-top", "ahb1",
0x064, BIT(30), 0);
static SUNXI_CCU_GATE(bus_codec_clk, "bus-codec", "apb1",
0x068, BIT(0), 0);
static SUNXI_CCU_GATE(bus_spdif_clk, "bus-spdif", "apb1",
0x068, BIT(1), 0);
static SUNXI_CCU_GATE(bus_ac97_clk, "bus-ac97", "apb1",
0x068, BIT(2), 0);
static SUNXI_CCU_GATE(bus_pio_clk, "bus-pio", "apb1",
0x068, BIT(5), 0);
static SUNXI_CCU_GATE(bus_ir0_clk, "bus-ir0", "apb1",
0x068, BIT(6), 0);
static SUNXI_CCU_GATE(bus_ir1_clk, "bus-ir1", "apb1",
0x068, BIT(7), 0);
static SUNXI_CCU_GATE(bus_ths_clk, "bus-ths", "apb1",
0x068, BIT(8), 0);
static SUNXI_CCU_GATE(bus_keypad_clk, "bus-keypad", "apb1",
0x068, BIT(10), 0);
static SUNXI_CCU_GATE(bus_i2s0_clk, "bus-i2s0", "apb1",
0x068, BIT(12), 0);
static SUNXI_CCU_GATE(bus_i2s1_clk, "bus-i2s1", "apb1",
0x068, BIT(13), 0);
static SUNXI_CCU_GATE(bus_i2s2_clk, "bus-i2s2", "apb1",
0x068, BIT(14), 0);
static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb2",
0x06c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_i2c1_clk, "bus-i2c1", "apb2",
0x06c, BIT(1), 0);
static SUNXI_CCU_GATE(bus_i2c2_clk, "bus-i2c2", "apb2",
0x06c, BIT(2), 0);
static SUNXI_CCU_GATE(bus_i2c3_clk, "bus-i2c3", "apb2",
0x06c, BIT(3), 0);
/*
* In datasheet here's "Reserved", however the gate exists in BSP soucre
* code.
*/
static SUNXI_CCU_GATE(bus_can_clk, "bus-can", "apb2",
0x06c, BIT(4), 0);
static SUNXI_CCU_GATE(bus_scr_clk, "bus-scr", "apb2",
0x06c, BIT(5), 0);
static SUNXI_CCU_GATE(bus_ps20_clk, "bus-ps20", "apb2",
0x06c, BIT(6), 0);
static SUNXI_CCU_GATE(bus_ps21_clk, "bus-ps21", "apb2",
0x06c, BIT(7), 0);
static SUNXI_CCU_GATE(bus_i2c4_clk, "bus-i2c4", "apb2",
0x06c, BIT(15), 0);
static SUNXI_CCU_GATE(bus_uart0_clk, "bus-uart0", "apb2",
0x06c, BIT(16), 0);
static SUNXI_CCU_GATE(bus_uart1_clk, "bus-uart1", "apb2",
0x06c, BIT(17), 0);
static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb2",
0x06c, BIT(18), 0);
static SUNXI_CCU_GATE(bus_uart3_clk, "bus-uart3", "apb2",
0x06c, BIT(19), 0);
static SUNXI_CCU_GATE(bus_uart4_clk, "bus-uart4", "apb2",
0x06c, BIT(20), 0);
static SUNXI_CCU_GATE(bus_uart5_clk, "bus-uart5", "apb2",
0x06c, BIT(21), 0);
static SUNXI_CCU_GATE(bus_uart6_clk, "bus-uart6", "apb2",
0x06c, BIT(22), 0);
static SUNXI_CCU_GATE(bus_uart7_clk, "bus-uart7", "apb2",
0x06c, BIT(23), 0);
static SUNXI_CCU_GATE(bus_dbg_clk, "bus-dbg", "ahb1",
0x070, BIT(7), 0);
static const char * const ths_parents[] = { "osc24M" };
static struct ccu_div ths_clk = {
.enable = BIT(31),
.div = _SUNXI_CCU_DIV_FLAGS(0, 2, CLK_DIVIDER_POWER_OF_TWO),
.mux = _SUNXI_CCU_MUX(24, 2),
.common = {
.reg = 0x074,
.hw.init = CLK_HW_INIT_PARENTS("ths",
ths_parents,
&ccu_div_ops,
0),
},
};
static const char * const mod0_default_parents[] = { "osc24M", "pll-periph0",
"pll-periph1" };
static SUNXI_CCU_MP_WITH_MUX_GATE(nand_clk, "nand", mod0_default_parents, 0x080,
0, 4, /* M */
16, 2, /* P */
24, 2, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mod0_default_parents, 0x088,
0, 4, /* M */
16, 2, /* P */
24, 2, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mod0_default_parents, 0x08c,
0, 4, /* M */
16, 2, /* P */
24, 2, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mod0_default_parents, 0x090,
0, 4, /* M */
16, 2, /* P */
24, 2, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_MP_WITH_MUX_GATE(mmc3_clk, "mmc3", mod0_default_parents, 0x094,
0, 4, /* M */
16, 2, /* P */
24, 2, /* mux */
BIT(31), /* gate */
0);
static const char * const ts_parents[] = { "osc24M", "pll-periph0", };
static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", ts_parents, 0x098,
0, 4, /* M */
16, 2, /* P */
24, 4, /* mux */
BIT(31), /* gate */
0);
static const char * const ce_parents[] = { "osc24M", "pll-periph0-2x",
"pll-periph1-2x" };
static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", ce_parents, 0x09c,
0, 4, /* M */
16, 2, /* P */
24, 2, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents, 0x0a0,
0, 4, /* M */
16, 2, /* P */
24, 2, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", mod0_default_parents, 0x0a4,
0, 4, /* M */
16, 2, /* P */
24, 2, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_MP_WITH_MUX_GATE(spi2_clk, "spi2", mod0_default_parents, 0x0a8,
0, 4, /* M */
16, 2, /* P */
24, 2, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_MP_WITH_MUX_GATE(spi3_clk, "spi3", mod0_default_parents, 0x0ac,
0, 4, /* M */
16, 2, /* P */
24, 2, /* mux */
BIT(31), /* gate */
0);
static const char * const i2s_parents[] = { "pll-audio-8x", "pll-audio-4x",
"pll-audio-2x", "pll-audio" };
static SUNXI_CCU_MUX_WITH_GATE(i2s0_clk, "i2s0", i2s_parents,
0x0b0, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
static SUNXI_CCU_MUX_WITH_GATE(i2s1_clk, "i2s1", i2s_parents,
0x0b4, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
static SUNXI_CCU_MUX_WITH_GATE(i2s2_clk, "i2s2", i2s_parents,
0x0b8, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
static SUNXI_CCU_MUX_WITH_GATE(ac97_clk, "ac97", i2s_parents,
0x0bc, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
static SUNXI_CCU_MUX_WITH_GATE(spdif_clk, "spdif", i2s_parents,
0x0c0, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
static const char * const keypad_parents[] = { "osc24M", "osc32k" };
static const u8 keypad_table[] = { 0, 2 };
static struct ccu_mp keypad_clk = {
.enable = BIT(31),
.m = _SUNXI_CCU_DIV(0, 5),
.p = _SUNXI_CCU_DIV(16, 2),
.mux = _SUNXI_CCU_MUX_TABLE(24, 2, keypad_table),
.common = {
.reg = 0x0c4,
.hw.init = CLK_HW_INIT_PARENTS("keypad",
keypad_parents,
&ccu_mp_ops,
0),
}
};
static const char * const sata_parents[] = { "pll-sata-out", "sata-ext" };
static SUNXI_CCU_MUX_WITH_GATE(sata_clk, "sata", sata_parents,
0x0c8, 24, 1, BIT(31), CLK_SET_RATE_PARENT);
/*
* There are 3 OHCI 12M clock source selection bits in this register.
* We will force them to 0 (12M divided from 48M).
*/
#define SUN8I_R40_USB_CLK_REG 0x0cc
static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "osc24M",
0x0cc, BIT(8), 0);
static SUNXI_CCU_GATE(usb_phy1_clk, "usb-phy1", "osc24M",
0x0cc, BIT(9), 0);
static SUNXI_CCU_GATE(usb_phy2_clk, "usb-phy2", "osc24M",
0x0cc, BIT(10), 0);
static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc12M",
0x0cc, BIT(16), 0);
static SUNXI_CCU_GATE(usb_ohci1_clk, "usb-ohci1", "osc12M",
0x0cc, BIT(17), 0);
static SUNXI_CCU_GATE(usb_ohci2_clk, "usb-ohci2", "osc12M",
0x0cc, BIT(18), 0);
static const char * const ir_parents[] = { "osc24M", "pll-periph0",
"pll-periph1", "osc32k" };
static SUNXI_CCU_MP_WITH_MUX_GATE(ir0_clk, "ir0", ir_parents, 0x0d0,
0, 4, /* M */
16, 2, /* P */
24, 2, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_MP_WITH_MUX_GATE(ir1_clk, "ir1", ir_parents, 0x0d4,
0, 4, /* M */
16, 2, /* P */
24, 2, /* mux */
BIT(31), /* gate */
0);
static const char * const dram_parents[] = { "pll-ddr0", "pll-ddr1" };
static SUNXI_CCU_M_WITH_MUX(dram_clk, "dram", dram_parents,
0x0f4, 0, 2, 20, 2, CLK_IS_CRITICAL);
static SUNXI_CCU_GATE(dram_ve_clk, "dram-ve", "dram",
0x100, BIT(0), 0);
static SUNXI_CCU_GATE(dram_csi0_clk, "dram-csi0", "dram",
0x100, BIT(1), 0);
static SUNXI_CCU_GATE(dram_csi1_clk, "dram-csi1", "dram",
0x100, BIT(2), 0);
static SUNXI_CCU_GATE(dram_ts_clk, "dram-ts", "dram",
0x100, BIT(3), 0);
static SUNXI_CCU_GATE(dram_tvd_clk, "dram-tvd", "dram",
0x100, BIT(4), 0);
static SUNXI_CCU_GATE(dram_mp_clk, "dram-mp", "dram",
0x100, BIT(5), 0);
static SUNXI_CCU_GATE(dram_deinterlace_clk, "dram-deinterlace", "dram",
0x100, BIT(6), 0);
static const char * const de_parents[] = { "pll-periph0-2x", "pll-de" };
static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents,
0x104, 0, 4, 24, 3, BIT(31),
CLK_SET_RATE_PARENT);
static SUNXI_CCU_M_WITH_MUX_GATE(mp_clk, "mp", de_parents,
0x108, 0, 4, 24, 3, BIT(31), 0);
static const char * const tcon_parents[] = { "pll-video0", "pll-video1",
"pll-video0-2x", "pll-video1-2x",
"pll-mipi" };
static SUNXI_CCU_MUX_WITH_GATE(tcon_lcd0_clk, "tcon-lcd0", tcon_parents,
0x110, 24, 3, BIT(31), CLK_SET_RATE_PARENT);
static SUNXI_CCU_MUX_WITH_GATE(tcon_lcd1_clk, "tcon-lcd1", tcon_parents,
0x114, 24, 3, BIT(31), CLK_SET_RATE_PARENT);
static SUNXI_CCU_M_WITH_MUX_GATE(tcon_tv0_clk, "tcon-tv0", tcon_parents,
0x118, 0, 4, 24, 3, BIT(31),
CLK_SET_RATE_PARENT);
static SUNXI_CCU_M_WITH_MUX_GATE(tcon_tv1_clk, "tcon-tv1", tcon_parents,
0x11c, 0, 4, 24, 3, BIT(31),
CLK_SET_RATE_PARENT);
static const char * const deinterlace_parents[] = { "pll-periph0",
"pll-periph1" };
static SUNXI_CCU_M_WITH_MUX_GATE(deinterlace_clk, "deinterlace",
deinterlace_parents, 0x124, 0, 4, 24, 3,
BIT(31), 0);
static const char * const csi_mclk_parents[] = { "osc24M", "pll-video1",
"pll-periph1" };
static SUNXI_CCU_M_WITH_MUX_GATE(csi1_mclk_clk, "csi1-mclk", csi_mclk_parents,
0x130, 0, 5, 8, 3, BIT(15), 0);
static const char * const csi_sclk_parents[] = { "pll-periph0", "pll-periph1" };
static SUNXI_CCU_M_WITH_MUX_GATE(csi_sclk_clk, "csi-sclk", csi_sclk_parents,
0x134, 16, 4, 24, 3, BIT(31), 0);
static SUNXI_CCU_M_WITH_MUX_GATE(csi0_mclk_clk, "csi0-mclk", csi_mclk_parents,
0x134, 0, 5, 8, 3, BIT(15), 0);
static SUNXI_CCU_M_WITH_GATE(ve_clk, "ve", "pll-ve",
0x13c, 16, 3, BIT(31), CLK_SET_RATE_PARENT);
static SUNXI_CCU_GATE(codec_clk, "codec", "pll-audio",
0x140, BIT(31), CLK_SET_RATE_PARENT);
static SUNXI_CCU_GATE(avs_clk, "avs", "osc24M",
0x144, BIT(31), 0);
static const char * const hdmi_parents[] = { "pll-video0", "pll-video1" };
static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents,
0x150, 0, 4, 24, 2, BIT(31),
CLK_SET_RATE_PARENT);
static SUNXI_CCU_GATE(hdmi_slow_clk, "hdmi-slow", "osc24M",
0x154, BIT(31), 0);
/*
* In the SoC's user manual, the P factor is mentioned, but not used in
* the frequency formula.
*
* Here the factor is included, according to the BSP kernel source,
* which contains the P factor of this clock.
*/
static const char * const mbus_parents[] = { "osc24M", "pll-periph0-2x",
"pll-ddr0" };
static SUNXI_CCU_MP_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents, 0x15c,
0, 4, /* M */
16, 2, /* P */
24, 2, /* mux */
BIT(31), /* gate */
CLK_IS_CRITICAL);
static const char * const dsi_dphy_parents[] = { "pll-video0", "pll-video1",
"pll-periph0" };
static SUNXI_CCU_M_WITH_MUX_GATE(dsi_dphy_clk, "dsi-dphy", dsi_dphy_parents,
0x168, 0, 4, 8, 2, BIT(15), 0);
static SUNXI_CCU_M_WITH_MUX_GATE(tve0_clk, "tve0", tcon_parents,
0x180, 0, 4, 24, 3, BIT(31), 0);
static SUNXI_CCU_M_WITH_MUX_GATE(tve1_clk, "tve1", tcon_parents,
0x184, 0, 4, 24, 3, BIT(31), 0);
static const char * const tvd_parents[] = { "pll-video0", "pll-video1",
"pll-video0-2x", "pll-video1-2x" };
static SUNXI_CCU_M_WITH_MUX_GATE(tvd0_clk, "tvd0", tvd_parents,
0x188, 0, 4, 24, 3, BIT(31), 0);
static SUNXI_CCU_M_WITH_MUX_GATE(tvd1_clk, "tvd1", tvd_parents,
0x18c, 0, 4, 24, 3, BIT(31), 0);
static SUNXI_CCU_M_WITH_MUX_GATE(tvd2_clk, "tvd2", tvd_parents,
0x190, 0, 4, 24, 3, BIT(31), 0);
static SUNXI_CCU_M_WITH_MUX_GATE(tvd3_clk, "tvd3", tvd_parents,
0x194, 0, 4, 24, 3, BIT(31), 0);
static SUNXI_CCU_M_WITH_GATE(gpu_clk, "gpu", "pll-gpu",
0x1a0, 0, 3, BIT(31), CLK_SET_RATE_PARENT);
static const char * const out_parents[] = { "osc24M", "osc32k", "osc24M" };
static const struct ccu_mux_fixed_prediv out_predivs[] = {
{ .index = 0, .div = 750, },
};
static struct ccu_mp outa_clk = {
.enable = BIT(31),
.m = _SUNXI_CCU_DIV(8, 5),
.p = _SUNXI_CCU_DIV(20, 2),
.mux = {
.shift = 24,
.width = 2,
.fixed_predivs = out_predivs,
.n_predivs = ARRAY_SIZE(out_predivs),
},
.common = {
.reg = 0x1f0,
.features = CCU_FEATURE_FIXED_PREDIV,
.hw.init = CLK_HW_INIT_PARENTS("outa", out_parents,
&ccu_mp_ops,
CLK_SET_RATE_PARENT),
}
};
static struct ccu_mp outb_clk = {
.enable = BIT(31),
.m = _SUNXI_CCU_DIV(8, 5),
.p = _SUNXI_CCU_DIV(20, 2),
.mux = {
.shift = 24,
.width = 2,
.fixed_predivs = out_predivs,
.n_predivs = ARRAY_SIZE(out_predivs),
},
.common = {
.reg = 0x1f4,
.features = CCU_FEATURE_FIXED_PREDIV,
.hw.init = CLK_HW_INIT_PARENTS("outb", out_parents,
&ccu_mp_ops,
CLK_SET_RATE_PARENT),
}
};
static struct ccu_common *sun8i_r40_ccu_clks[] = {
&pll_cpu_clk.common,
&pll_audio_base_clk.common,
&pll_video0_clk.common,
&pll_ve_clk.common,
&pll_ddr0_clk.common,
&pll_periph0_clk.common,
&pll_periph0_sata_clk.common,
&pll_periph1_clk.common,
&pll_video1_clk.common,
&pll_sata_clk.common,
&pll_sata_out_clk.common,
&pll_gpu_clk.common,
&pll_mipi_clk.common,
&pll_de_clk.common,
&pll_ddr1_clk.common,
&cpu_clk.common,
&axi_clk.common,
&ahb1_clk.common,
&apb1_clk.common,
&apb2_clk.common,
&bus_mipi_dsi_clk.common,
&bus_ce_clk.common,
&bus_dma_clk.common,
&bus_mmc0_clk.common,
&bus_mmc1_clk.common,
&bus_mmc2_clk.common,
&bus_mmc3_clk.common,
&bus_nand_clk.common,
&bus_dram_clk.common,
&bus_emac_clk.common,
&bus_ts_clk.common,
&bus_hstimer_clk.common,
&bus_spi0_clk.common,
&bus_spi1_clk.common,
&bus_spi2_clk.common,
&bus_spi3_clk.common,
&bus_sata_clk.common,
&bus_otg_clk.common,
&bus_ehci0_clk.common,
&bus_ehci1_clk.common,
&bus_ehci2_clk.common,
&bus_ohci0_clk.common,
&bus_ohci1_clk.common,
&bus_ohci2_clk.common,
&bus_ve_clk.common,
&bus_mp_clk.common,
&bus_deinterlace_clk.common,
&bus_csi0_clk.common,
&bus_csi1_clk.common,
&bus_hdmi0_clk.common,
&bus_hdmi1_clk.common,
&bus_de_clk.common,
&bus_tve0_clk.common,
&bus_tve1_clk.common,
&bus_tve_top_clk.common,
&bus_gmac_clk.common,
&bus_gpu_clk.common,
&bus_tvd0_clk.common,
&bus_tvd1_clk.common,
&bus_tvd2_clk.common,
&bus_tvd3_clk.common,
&bus_tvd_top_clk.common,
&bus_tcon_lcd0_clk.common,
&bus_tcon_lcd1_clk.common,
&bus_tcon_tv0_clk.common,
&bus_tcon_tv1_clk.common,
&bus_tcon_top_clk.common,
&bus_codec_clk.common,
&bus_spdif_clk.common,
&bus_ac97_clk.common,
&bus_pio_clk.common,
&bus_ir0_clk.common,
&bus_ir1_clk.common,
&bus_ths_clk.common,
&bus_keypad_clk.common,
&bus_i2s0_clk.common,
&bus_i2s1_clk.common,
&bus_i2s2_clk.common,
&bus_i2c0_clk.common,
&bus_i2c1_clk.common,
&bus_i2c2_clk.common,
&bus_i2c3_clk.common,
&bus_can_clk.common,
&bus_scr_clk.common,
&bus_ps20_clk.common,
&bus_ps21_clk.common,
&bus_i2c4_clk.common,
&bus_uart0_clk.common,
&bus_uart1_clk.common,
&bus_uart2_clk.common,
&bus_uart3_clk.common,
&bus_uart4_clk.common,
&bus_uart5_clk.common,
&bus_uart6_clk.common,
&bus_uart7_clk.common,
&bus_dbg_clk.common,
&ths_clk.common,
&nand_clk.common,
&mmc0_clk.common,
&mmc1_clk.common,
&mmc2_clk.common,
&mmc3_clk.common,
&ts_clk.common,
&ce_clk.common,
&spi0_clk.common,
&spi1_clk.common,
&spi2_clk.common,
&spi3_clk.common,
&i2s0_clk.common,
&i2s1_clk.common,
&i2s2_clk.common,
&ac97_clk.common,
&spdif_clk.common,
&keypad_clk.common,
&sata_clk.common,
&usb_phy0_clk.common,
&usb_phy1_clk.common,
&usb_phy2_clk.common,
&usb_ohci0_clk.common,
&usb_ohci1_clk.common,
&usb_ohci2_clk.common,
&ir0_clk.common,
&ir1_clk.common,
&dram_clk.common,
&dram_ve_clk.common,
&dram_csi0_clk.common,
&dram_csi1_clk.common,
&dram_ts_clk.common,
&dram_tvd_clk.common,
&dram_mp_clk.common,
&dram_deinterlace_clk.common,
&de_clk.common,
&mp_clk.common,
&tcon_lcd0_clk.common,
&tcon_lcd1_clk.common,
&tcon_tv0_clk.common,
&tcon_tv1_clk.common,
&deinterlace_clk.common,
&csi1_mclk_clk.common,
&csi_sclk_clk.common,
&csi0_mclk_clk.common,
&ve_clk.common,
&codec_clk.common,
&avs_clk.common,
&hdmi_clk.common,
&hdmi_slow_clk.common,
&mbus_clk.common,
&dsi_dphy_clk.common,
&tve0_clk.common,
&tve1_clk.common,
&tvd0_clk.common,
&tvd1_clk.common,
&tvd2_clk.common,
&tvd3_clk.common,
&gpu_clk.common,
&outa_clk.common,
&outb_clk.common,
};
/* Fixed Factor clocks */
static CLK_FIXED_FACTOR_FW_NAME(osc12M_clk, "osc12M", "hosc", 2, 1, 0);
static const struct clk_hw *clk_parent_pll_audio[] = {
&pll_audio_base_clk.common.hw
};
/* We hardcode the divider to 1 for now */
static CLK_FIXED_FACTOR_HWS(pll_audio_clk, "pll-audio",
clk_parent_pll_audio,
1, 1, CLK_SET_RATE_PARENT);
static CLK_FIXED_FACTOR_HWS(pll_audio_2x_clk, "pll-audio-2x",
clk_parent_pll_audio,
2, 1, CLK_SET_RATE_PARENT);
static CLK_FIXED_FACTOR_HWS(pll_audio_4x_clk, "pll-audio-4x",
clk_parent_pll_audio,
1, 1, CLK_SET_RATE_PARENT);
static CLK_FIXED_FACTOR_HWS(pll_audio_8x_clk, "pll-audio-8x",
clk_parent_pll_audio,
1, 2, CLK_SET_RATE_PARENT);
static CLK_FIXED_FACTOR_HW(pll_periph0_2x_clk, "pll-periph0-2x",
&pll_periph0_clk.common.hw,
1, 2, 0);
static CLK_FIXED_FACTOR_HW(pll_periph1_2x_clk, "pll-periph1-2x",
&pll_periph1_clk.common.hw,
1, 2, 0);
static CLK_FIXED_FACTOR_HW(pll_video0_2x_clk, "pll-video0-2x",
&pll_video0_clk.common.hw,
1, 2, 0);
static CLK_FIXED_FACTOR_HW(pll_video1_2x_clk, "pll-video1-2x",
&pll_video1_clk.common.hw,
1, 2, 0);
static struct clk_hw_onecell_data sun8i_r40_hw_clks = {
.hws = {
[CLK_OSC_12M] = &osc12M_clk.hw,
[CLK_PLL_CPU] = &pll_cpu_clk.common.hw,
[CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw,
[CLK_PLL_AUDIO] = &pll_audio_clk.hw,
[CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
[CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
[CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.hw,
[CLK_PLL_VIDEO0] = &pll_video0_clk.common.hw,
[CLK_PLL_VIDEO0_2X] = &pll_video0_2x_clk.hw,
[CLK_PLL_VE] = &pll_ve_clk.common.hw,
[CLK_PLL_DDR0] = &pll_ddr0_clk.common.hw,
[CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw,
[CLK_PLL_PERIPH0_SATA] = &pll_periph0_sata_clk.common.hw,
[CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.hw,
[CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw,
[CLK_PLL_PERIPH1_2X] = &pll_periph1_2x_clk.hw,
[CLK_PLL_VIDEO1] = &pll_video1_clk.common.hw,
[CLK_PLL_VIDEO1_2X] = &pll_video1_2x_clk.hw,
[CLK_PLL_SATA] = &pll_sata_clk.common.hw,
[CLK_PLL_SATA_OUT] = &pll_sata_out_clk.common.hw,
[CLK_PLL_GPU] = &pll_gpu_clk.common.hw,
[CLK_PLL_MIPI] = &pll_mipi_clk.common.hw,
[CLK_PLL_DE] = &pll_de_clk.common.hw,
[CLK_PLL_DDR1] = &pll_ddr1_clk.common.hw,
[CLK_CPU] = &cpu_clk.common.hw,
[CLK_AXI] = &axi_clk.common.hw,
[CLK_AHB1] = &ahb1_clk.common.hw,
[CLK_APB1] = &apb1_clk.common.hw,
[CLK_APB2] = &apb2_clk.common.hw,
[CLK_BUS_MIPI_DSI] = &bus_mipi_dsi_clk.common.hw,
[CLK_BUS_CE] = &bus_ce_clk.common.hw,
[CLK_BUS_DMA] = &bus_dma_clk.common.hw,
[CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw,
[CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw,
[CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw,
[CLK_BUS_MMC3] = &bus_mmc3_clk.common.hw,
[CLK_BUS_NAND] = &bus_nand_clk.common.hw,
[CLK_BUS_DRAM] = &bus_dram_clk.common.hw,
[CLK_BUS_EMAC] = &bus_emac_clk.common.hw,
[CLK_BUS_TS] = &bus_ts_clk.common.hw,
[CLK_BUS_HSTIMER] = &bus_hstimer_clk.common.hw,
[CLK_BUS_SPI0] = &bus_spi0_clk.common.hw,
[CLK_BUS_SPI1] = &bus_spi1_clk.common.hw,
[CLK_BUS_SPI2] = &bus_spi2_clk.common.hw,
[CLK_BUS_SPI3] = &bus_spi3_clk.common.hw,
[CLK_BUS_SATA] = &bus_sata_clk.common.hw,
[CLK_BUS_OTG] = &bus_otg_clk.common.hw,
[CLK_BUS_EHCI0] = &bus_ehci0_clk.common.hw,
[CLK_BUS_EHCI1] = &bus_ehci1_clk.common.hw,
[CLK_BUS_EHCI2] = &bus_ehci2_clk.common.hw,
[CLK_BUS_OHCI0] = &bus_ohci0_clk.common.hw,
[CLK_BUS_OHCI1] = &bus_ohci1_clk.common.hw,
[CLK_BUS_OHCI2] = &bus_ohci2_clk.common.hw,
[CLK_BUS_VE] = &bus_ve_clk.common.hw,
[CLK_BUS_MP] = &bus_mp_clk.common.hw,
[CLK_BUS_DEINTERLACE] = &bus_deinterlace_clk.common.hw,
[CLK_BUS_CSI0] = &bus_csi0_clk.common.hw,
[CLK_BUS_CSI1] = &bus_csi1_clk.common.hw,
[CLK_BUS_HDMI0] = &bus_hdmi0_clk.common.hw,
[CLK_BUS_HDMI1] = &bus_hdmi1_clk.common.hw,
[CLK_BUS_DE] = &bus_de_clk.common.hw,
[CLK_BUS_TVE0] = &bus_tve0_clk.common.hw,
[CLK_BUS_TVE1] = &bus_tve1_clk.common.hw,
[CLK_BUS_TVE_TOP] = &bus_tve_top_clk.common.hw,
[CLK_BUS_GMAC] = &bus_gmac_clk.common.hw,
[CLK_BUS_GPU] = &bus_gpu_clk.common.hw,
[CLK_BUS_TVD0] = &bus_tvd0_clk.common.hw,
[CLK_BUS_TVD1] = &bus_tvd1_clk.common.hw,
[CLK_BUS_TVD2] = &bus_tvd2_clk.common.hw,
[CLK_BUS_TVD3] = &bus_tvd3_clk.common.hw,
[CLK_BUS_TVD_TOP] = &bus_tvd_top_clk.common.hw,
[CLK_BUS_TCON_LCD0] = &bus_tcon_lcd0_clk.common.hw,
[CLK_BUS_TCON_LCD1] = &bus_tcon_lcd1_clk.common.hw,
[CLK_BUS_TCON_TV0] = &bus_tcon_tv0_clk.common.hw,
[CLK_BUS_TCON_TV1] = &bus_tcon_tv1_clk.common.hw,
[CLK_BUS_TCON_TOP] = &bus_tcon_top_clk.common.hw,
[CLK_BUS_CODEC] = &bus_codec_clk.common.hw,
[CLK_BUS_SPDIF] = &bus_spdif_clk.common.hw,
[CLK_BUS_AC97] = &bus_ac97_clk.common.hw,
[CLK_BUS_PIO] = &bus_pio_clk.common.hw,
[CLK_BUS_IR0] = &bus_ir0_clk.common.hw,
[CLK_BUS_IR1] = &bus_ir1_clk.common.hw,
[CLK_BUS_THS] = &bus_ths_clk.common.hw,
[CLK_BUS_KEYPAD] = &bus_keypad_clk.common.hw,
[CLK_BUS_I2S0] = &bus_i2s0_clk.common.hw,
[CLK_BUS_I2S1] = &bus_i2s1_clk.common.hw,
[CLK_BUS_I2S2] = &bus_i2s2_clk.common.hw,
[CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw,
[CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw,
[CLK_BUS_I2C2] = &bus_i2c2_clk.common.hw,
[CLK_BUS_I2C3] = &bus_i2c3_clk.common.hw,
[CLK_BUS_CAN] = &bus_can_clk.common.hw,
[CLK_BUS_SCR] = &bus_scr_clk.common.hw,
[CLK_BUS_PS20] = &bus_ps20_clk.common.hw,
[CLK_BUS_PS21] = &bus_ps21_clk.common.hw,
[CLK_BUS_I2C4] = &bus_i2c4_clk.common.hw,
[CLK_BUS_UART0] = &bus_uart0_clk.common.hw,
[CLK_BUS_UART1] = &bus_uart1_clk.common.hw,
[CLK_BUS_UART2] = &bus_uart2_clk.common.hw,
[CLK_BUS_UART3] = &bus_uart3_clk.common.hw,
[CLK_BUS_UART4] = &bus_uart4_clk.common.hw,
[CLK_BUS_UART5] = &bus_uart5_clk.common.hw,
[CLK_BUS_UART6] = &bus_uart6_clk.common.hw,
[CLK_BUS_UART7] = &bus_uart7_clk.common.hw,
[CLK_BUS_DBG] = &bus_dbg_clk.common.hw,
[CLK_THS] = &ths_clk.common.hw,
[CLK_NAND] = &nand_clk.common.hw,
[CLK_MMC0] = &mmc0_clk.common.hw,
[CLK_MMC1] = &mmc1_clk.common.hw,
[CLK_MMC2] = &mmc2_clk.common.hw,
[CLK_MMC3] = &mmc3_clk.common.hw,
[CLK_TS] = &ts_clk.common.hw,
[CLK_CE] = &ce_clk.common.hw,
[CLK_SPI0] = &spi0_clk.common.hw,
[CLK_SPI1] = &spi1_clk.common.hw,
[CLK_SPI2] = &spi2_clk.common.hw,
[CLK_SPI3] = &spi3_clk.common.hw,
[CLK_I2S0] = &i2s0_clk.common.hw,
[CLK_I2S1] = &i2s1_clk.common.hw,
[CLK_I2S2] = &i2s2_clk.common.hw,
[CLK_AC97] = &ac97_clk.common.hw,
[CLK_SPDIF] = &spdif_clk.common.hw,
[CLK_KEYPAD] = &keypad_clk.common.hw,
[CLK_SATA] = &sata_clk.common.hw,
[CLK_USB_PHY0] = &usb_phy0_clk.common.hw,
[CLK_USB_PHY1] = &usb_phy1_clk.common.hw,
[CLK_USB_PHY2] = &usb_phy2_clk.common.hw,
[CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
[CLK_USB_OHCI1] = &usb_ohci1_clk.common.hw,
[CLK_USB_OHCI2] = &usb_ohci2_clk.common.hw,
[CLK_IR0] = &ir0_clk.common.hw,
[CLK_IR1] = &ir1_clk.common.hw,
[CLK_DRAM] = &dram_clk.common.hw,
[CLK_DRAM_VE] = &dram_ve_clk.common.hw,
[CLK_DRAM_CSI0] = &dram_csi0_clk.common.hw,
[CLK_DRAM_CSI1] = &dram_csi1_clk.common.hw,
[CLK_DRAM_TS] = &dram_ts_clk.common.hw,
[CLK_DRAM_TVD] = &dram_tvd_clk.common.hw,
[CLK_DRAM_MP] = &dram_mp_clk.common.hw,
[CLK_DRAM_DEINTERLACE] = &dram_deinterlace_clk.common.hw,
[CLK_DE] = &de_clk.common.hw,
[CLK_MP] = &mp_clk.common.hw,
[CLK_TCON_LCD0] = &tcon_lcd0_clk.common.hw,
[CLK_TCON_LCD1] = &tcon_lcd1_clk.common.hw,
[CLK_TCON_TV0] = &tcon_tv0_clk.common.hw,
[CLK_TCON_TV1] = &tcon_tv1_clk.common.hw,
[CLK_DEINTERLACE] = &deinterlace_clk.common.hw,
[CLK_CSI1_MCLK] = &csi1_mclk_clk.common.hw,
[CLK_CSI_SCLK] = &csi_sclk_clk.common.hw,
[CLK_CSI0_MCLK] = &csi0_mclk_clk.common.hw,
[CLK_VE] = &ve_clk.common.hw,
[CLK_CODEC] = &codec_clk.common.hw,
[CLK_AVS] = &avs_clk.common.hw,
[CLK_HDMI] = &hdmi_clk.common.hw,
[CLK_HDMI_SLOW] = &hdmi_slow_clk.common.hw,
[CLK_MBUS] = &mbus_clk.common.hw,
[CLK_DSI_DPHY] = &dsi_dphy_clk.common.hw,
[CLK_TVE0] = &tve0_clk.common.hw,
[CLK_TVE1] = &tve1_clk.common.hw,
[CLK_TVD0] = &tvd0_clk.common.hw,
[CLK_TVD1] = &tvd1_clk.common.hw,
[CLK_TVD2] = &tvd2_clk.common.hw,
[CLK_TVD3] = &tvd3_clk.common.hw,
[CLK_GPU] = &gpu_clk.common.hw,
[CLK_OUTA] = &outa_clk.common.hw,
[CLK_OUTB] = &outb_clk.common.hw,
},
.num = CLK_NUMBER,
};
static struct ccu_reset_map sun8i_r40_ccu_resets[] = {
[RST_USB_PHY0] = { 0x0cc, BIT(0) },
[RST_USB_PHY1] = { 0x0cc, BIT(1) },
[RST_USB_PHY2] = { 0x0cc, BIT(2) },
[RST_DRAM] = { 0x0f4, BIT(31) },
[RST_MBUS] = { 0x0fc, BIT(31) },
[RST_BUS_MIPI_DSI] = { 0x2c0, BIT(1) },
[RST_BUS_CE] = { 0x2c0, BIT(5) },
[RST_BUS_DMA] = { 0x2c0, BIT(6) },
[RST_BUS_MMC0] = { 0x2c0, BIT(8) },
[RST_BUS_MMC1] = { 0x2c0, BIT(9) },
[RST_BUS_MMC2] = { 0x2c0, BIT(10) },
[RST_BUS_MMC3] = { 0x2c0, BIT(11) },
[RST_BUS_NAND] = { 0x2c0, BIT(13) },
[RST_BUS_DRAM] = { 0x2c0, BIT(14) },
[RST_BUS_EMAC] = { 0x2c0, BIT(17) },
[RST_BUS_TS] = { 0x2c0, BIT(18) },
[RST_BUS_HSTIMER] = { 0x2c0, BIT(19) },
[RST_BUS_SPI0] = { 0x2c0, BIT(20) },
[RST_BUS_SPI1] = { 0x2c0, BIT(21) },
[RST_BUS_SPI2] = { 0x2c0, BIT(22) },
[RST_BUS_SPI3] = { 0x2c0, BIT(23) },
[RST_BUS_SATA] = { 0x2c0, BIT(24) },
[RST_BUS_OTG] = { 0x2c0, BIT(25) },
[RST_BUS_EHCI0] = { 0x2c0, BIT(26) },
[RST_BUS_EHCI1] = { 0x2c0, BIT(27) },
[RST_BUS_EHCI2] = { 0x2c0, BIT(28) },
[RST_BUS_OHCI0] = { 0x2c0, BIT(29) },
[RST_BUS_OHCI1] = { 0x2c0, BIT(30) },
[RST_BUS_OHCI2] = { 0x2c0, BIT(31) },
[RST_BUS_VE] = { 0x2c4, BIT(0) },
[RST_BUS_MP] = { 0x2c4, BIT(2) },
[RST_BUS_DEINTERLACE] = { 0x2c4, BIT(5) },
[RST_BUS_CSI0] = { 0x2c4, BIT(8) },
[RST_BUS_CSI1] = { 0x2c4, BIT(9) },
[RST_BUS_HDMI0] = { 0x2c4, BIT(10) },
[RST_BUS_HDMI1] = { 0x2c4, BIT(11) },
[RST_BUS_DE] = { 0x2c4, BIT(12) },
[RST_BUS_TVE0] = { 0x2c4, BIT(13) },
[RST_BUS_TVE1] = { 0x2c4, BIT(14) },
[RST_BUS_TVE_TOP] = { 0x2c4, BIT(15) },
[RST_BUS_GMAC] = { 0x2c4, BIT(17) },
[RST_BUS_GPU] = { 0x2c4, BIT(20) },
[RST_BUS_TVD0] = { 0x2c4, BIT(21) },
[RST_BUS_TVD1] = { 0x2c4, BIT(22) },
[RST_BUS_TVD2] = { 0x2c4, BIT(23) },
[RST_BUS_TVD3] = { 0x2c4, BIT(24) },
[RST_BUS_TVD_TOP] = { 0x2c4, BIT(25) },
[RST_BUS_TCON_LCD0] = { 0x2c4, BIT(26) },
[RST_BUS_TCON_LCD1] = { 0x2c4, BIT(27) },
[RST_BUS_TCON_TV0] = { 0x2c4, BIT(28) },
[RST_BUS_TCON_TV1] = { 0x2c4, BIT(29) },
[RST_BUS_TCON_TOP] = { 0x2c4, BIT(30) },
[RST_BUS_DBG] = { 0x2c4, BIT(31) },
[RST_BUS_LVDS] = { 0x2c8, BIT(0) },
[RST_BUS_CODEC] = { 0x2d0, BIT(0) },
[RST_BUS_SPDIF] = { 0x2d0, BIT(1) },
[RST_BUS_AC97] = { 0x2d0, BIT(2) },
[RST_BUS_IR0] = { 0x2d0, BIT(6) },
[RST_BUS_IR1] = { 0x2d0, BIT(7) },
[RST_BUS_THS] = { 0x2d0, BIT(8) },
[RST_BUS_KEYPAD] = { 0x2d0, BIT(10) },
[RST_BUS_I2S0] = { 0x2d0, BIT(12) },
[RST_BUS_I2S1] = { 0x2d0, BIT(13) },
[RST_BUS_I2S2] = { 0x2d0, BIT(14) },
[RST_BUS_I2C0] = { 0x2d8, BIT(0) },
[RST_BUS_I2C1] = { 0x2d8, BIT(1) },
[RST_BUS_I2C2] = { 0x2d8, BIT(2) },
[RST_BUS_I2C3] = { 0x2d8, BIT(3) },
[RST_BUS_CAN] = { 0x2d8, BIT(4) },
[RST_BUS_SCR] = { 0x2d8, BIT(5) },
[RST_BUS_PS20] = { 0x2d8, BIT(6) },
[RST_BUS_PS21] = { 0x2d8, BIT(7) },
[RST_BUS_I2C4] = { 0x2d8, BIT(15) },
[RST_BUS_UART0] = { 0x2d8, BIT(16) },
[RST_BUS_UART1] = { 0x2d8, BIT(17) },
[RST_BUS_UART2] = { 0x2d8, BIT(18) },
[RST_BUS_UART3] = { 0x2d8, BIT(19) },
[RST_BUS_UART4] = { 0x2d8, BIT(20) },
[RST_BUS_UART5] = { 0x2d8, BIT(21) },
[RST_BUS_UART6] = { 0x2d8, BIT(22) },
[RST_BUS_UART7] = { 0x2d8, BIT(23) },
};
static const struct sunxi_ccu_desc sun8i_r40_ccu_desc = {
.ccu_clks = sun8i_r40_ccu_clks,
.num_ccu_clks = ARRAY_SIZE(sun8i_r40_ccu_clks),
.hw_clks = &sun8i_r40_hw_clks,
.resets = sun8i_r40_ccu_resets,
.num_resets = ARRAY_SIZE(sun8i_r40_ccu_resets),
};
static struct ccu_pll_nb sun8i_r40_pll_cpu_nb = {
.common = &pll_cpu_clk.common,
/* copy from pll_cpu_clk */
.enable = BIT(31),
.lock = BIT(28),
};
static struct ccu_mux_nb sun8i_r40_cpu_nb = {
.common = &cpu_clk.common,
.cm = &cpu_clk.mux,
.delay_us = 1, /* > 8 clock cycles at 24 MHz */
.bypass_index = 1, /* index of 24 MHz oscillator */
};
/*
* Add a regmap for the GMAC driver (dwmac-sun8i) to access the
* GMAC configuration register.
* Only this register is allowed to be written, in order to
* prevent overriding critical clock configuration.
*/
#define SUN8I_R40_GMAC_CFG_REG 0x164
static bool sun8i_r40_ccu_regmap_accessible_reg(struct device *dev,
unsigned int reg)
{
if (reg == SUN8I_R40_GMAC_CFG_REG)
return true;
return false;
}
static struct regmap_config sun8i_r40_ccu_regmap_config = {
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
.max_register = 0x320, /* PLL_LOCK_CTRL_REG */
/* other devices have no business accessing other registers */
.readable_reg = sun8i_r40_ccu_regmap_accessible_reg,
.writeable_reg = sun8i_r40_ccu_regmap_accessible_reg,
};
#define SUN8I_R40_SYS_32K_CLK_REG 0x310
#define SUN8I_R40_SYS_32K_CLK_KEY (0x16AA << 16)
static int sun8i_r40_ccu_probe(struct platform_device *pdev)
{
struct regmap *regmap;
void __iomem *reg;
u32 val;
int ret;
reg = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(reg))
return PTR_ERR(reg);
/* Force the PLL-Audio-1x divider to 1 */
val = readl(reg + SUN8I_R40_PLL_AUDIO_REG);
val &= ~GENMASK(19, 16);
writel(val | (0 << 16), reg + SUN8I_R40_PLL_AUDIO_REG);
/* Force PLL-MIPI to MIPI mode */
val = readl(reg + SUN8I_R40_PLL_MIPI_REG);
val &= ~BIT(16);
writel(val, reg + SUN8I_R40_PLL_MIPI_REG);
/* Force OHCI 12M parent to 12M divided from 48M */
val = readl(reg + SUN8I_R40_USB_CLK_REG);
val &= ~GENMASK(25, 20);
writel(val, reg + SUN8I_R40_USB_CLK_REG);
/*
* Force SYS 32k (otherwise known as LOSC throughout the CCU)
* clock parent to LOSC output from RTC module instead of the
* CCU's internal RC oscillator divided output.
*/
writel(SUN8I_R40_SYS_32K_CLK_KEY | BIT(8),
reg + SUN8I_R40_SYS_32K_CLK_REG);
regmap = devm_regmap_init_mmio(&pdev->dev, reg,
&sun8i_r40_ccu_regmap_config);
if (IS_ERR(regmap))
return PTR_ERR(regmap);
ret = devm_sunxi_ccu_probe(&pdev->dev, reg, &sun8i_r40_ccu_desc);
if (ret)
return ret;
/* Gate then ungate PLL CPU after any rate changes */
ccu_pll_notifier_register(&sun8i_r40_pll_cpu_nb);
/* Reparent CPU during PLL CPU rate changes */
ccu_mux_notifier_register(pll_cpu_clk.common.hw.clk,
&sun8i_r40_cpu_nb);
return 0;
}
static const struct of_device_id sun8i_r40_ccu_ids[] = {
{ .compatible = "allwinner,sun8i-r40-ccu" },
{ }
};
static struct platform_driver sun8i_r40_ccu_driver = {
.probe = sun8i_r40_ccu_probe,
.driver = {
.name = "sun8i-r40-ccu",
.suppress_bind_attrs = true,
.of_match_table = sun8i_r40_ccu_ids,
},
};
module_platform_driver(sun8i_r40_ccu_driver);
MODULE_IMPORT_NS(SUNXI_CCU);
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink