0baabcbedd
To support XUSB host controller ELPG, this commit moves VBUS control .phy_power_on()/.phy_power_off() to .phy_init()/.phy_exit(). When XUSB host controller enters ELPG, host driver invokes .phy_power_off(), VBUS should remain ON so that USB devices will not disconnect. VBUS can be turned OFF when host driver invokes .phy_exit() which indicates disabling a USB port. Signed-off-by: JC Kuo <jckuo@nvidia.com> Acked-By: Vinod Koul <vkoul@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
3297 lines
100 KiB
C
3297 lines
100 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (c) 2014-2020, NVIDIA CORPORATION. All rights reserved.
|
|
* Copyright (C) 2015 Google, Inc.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/clk/tegra.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/mailbox_client.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <soc/tegra/fuse.h>
|
|
|
|
#include "xusb.h"
|
|
|
|
#define FUSE_SKU_CALIB_HS_CURR_LEVEL_PADX_SHIFT(x) \
|
|
((x) ? (11 + ((x) - 1) * 6) : 0)
|
|
#define FUSE_SKU_CALIB_HS_CURR_LEVEL_PAD_MASK 0x3f
|
|
#define FUSE_SKU_CALIB_HS_TERM_RANGE_ADJ_SHIFT 7
|
|
#define FUSE_SKU_CALIB_HS_TERM_RANGE_ADJ_MASK 0xf
|
|
|
|
#define FUSE_USB_CALIB_EXT_RPD_CTRL_SHIFT 0
|
|
#define FUSE_USB_CALIB_EXT_RPD_CTRL_MASK 0x1f
|
|
|
|
#define XUSB_PADCTL_USB2_PAD_MUX 0x004
|
|
#define XUSB_PADCTL_USB2_PAD_MUX_HSIC_PAD_TRK_SHIFT 16
|
|
#define XUSB_PADCTL_USB2_PAD_MUX_HSIC_PAD_TRK_MASK 0x3
|
|
#define XUSB_PADCTL_USB2_PAD_MUX_HSIC_PAD_TRK_XUSB 0x1
|
|
#define XUSB_PADCTL_USB2_PAD_MUX_USB2_BIAS_PAD_SHIFT 18
|
|
#define XUSB_PADCTL_USB2_PAD_MUX_USB2_BIAS_PAD_MASK 0x3
|
|
#define XUSB_PADCTL_USB2_PAD_MUX_USB2_BIAS_PAD_XUSB 0x1
|
|
|
|
#define XUSB_PADCTL_USB2_PORT_CAP 0x008
|
|
#define XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_DISABLED(x) (0x0 << ((x) * 4))
|
|
#define XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_HOST(x) (0x1 << ((x) * 4))
|
|
#define XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_DEVICE(x) (0x2 << ((x) * 4))
|
|
#define XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_OTG(x) (0x3 << ((x) * 4))
|
|
#define XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_MASK(x) (0x3 << ((x) * 4))
|
|
|
|
#define XUSB_PADCTL_SS_PORT_MAP 0x014
|
|
#define XUSB_PADCTL_SS_PORT_MAP_PORTX_INTERNAL(x) (1 << (((x) * 5) + 4))
|
|
#define XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP_SHIFT(x) ((x) * 5)
|
|
#define XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP_MASK(x) (0x7 << ((x) * 5))
|
|
#define XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP(x, v) (((v) & 0x7) << ((x) * 5))
|
|
#define XUSB_PADCTL_SS_PORT_MAP_PORT_DISABLED 0x7
|
|
|
|
#define XUSB_PADCTL_ELPG_PROGRAM_0 0x20
|
|
#define USB2_PORT_WAKE_INTERRUPT_ENABLE(x) BIT((x))
|
|
#define USB2_PORT_WAKEUP_EVENT(x) BIT((x) + 7)
|
|
#define SS_PORT_WAKE_INTERRUPT_ENABLE(x) BIT((x) + 14)
|
|
#define SS_PORT_WAKEUP_EVENT(x) BIT((x) + 21)
|
|
#define USB2_HSIC_PORT_WAKE_INTERRUPT_ENABLE(x) BIT((x) + 28)
|
|
#define USB2_HSIC_PORT_WAKEUP_EVENT(x) BIT((x) + 30)
|
|
#define ALL_WAKE_EVENTS ( \
|
|
USB2_PORT_WAKEUP_EVENT(0) | USB2_PORT_WAKEUP_EVENT(1) | \
|
|
USB2_PORT_WAKEUP_EVENT(2) | USB2_PORT_WAKEUP_EVENT(3) | \
|
|
SS_PORT_WAKEUP_EVENT(0) | SS_PORT_WAKEUP_EVENT(1) | \
|
|
SS_PORT_WAKEUP_EVENT(2) | SS_PORT_WAKEUP_EVENT(3) | \
|
|
USB2_HSIC_PORT_WAKEUP_EVENT(0))
|
|
|
|
#define XUSB_PADCTL_ELPG_PROGRAM1 0x024
|
|
#define XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_VCORE_DOWN (1 << 31)
|
|
#define XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_CLAMP_EN_EARLY (1 << 30)
|
|
#define XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_CLAMP_EN (1 << 29)
|
|
#define XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_VCORE_DOWN(x) (1 << (2 + (x) * 3))
|
|
#define XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN_EARLY(x) \
|
|
(1 << (1 + (x) * 3))
|
|
#define XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN(x) (1 << ((x) * 3))
|
|
|
|
#define XUSB_PADCTL_USB3_PAD_MUX 0x028
|
|
#define XUSB_PADCTL_USB3_PAD_MUX_PCIE_IDDQ_DISABLE(x) (1 << (1 + (x)))
|
|
#define XUSB_PADCTL_USB3_PAD_MUX_SATA_IDDQ_DISABLE(x) (1 << (8 + (x)))
|
|
|
|
#define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL0(x) (0x080 + (x) * 0x40)
|
|
#define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL0_ZIP (1 << 18)
|
|
#define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL0_ZIN (1 << 22)
|
|
|
|
#define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(x) (0x084 + (x) * 0x40)
|
|
#define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_SHIFT 7
|
|
#define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_MASK 0x3
|
|
#define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_VAL 0x1
|
|
#define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18 (1 << 6)
|
|
|
|
#define XUSB_PADCTL_USB2_OTG_PADX_CTL0(x) (0x088 + (x) * 0x40)
|
|
#define XUSB_PADCTL_USB2_OTG_PAD_CTL0_PD_ZI (1 << 29)
|
|
#define XUSB_PADCTL_USB2_OTG_PAD_CTL0_PD2 (1 << 27)
|
|
#define XUSB_PADCTL_USB2_OTG_PAD_CTL0_PD (1 << 26)
|
|
#define XUSB_PADCTL_USB2_OTG_PAD_CTL0_HS_CURR_LEVEL_SHIFT 0
|
|
#define XUSB_PADCTL_USB2_OTG_PAD_CTL0_HS_CURR_LEVEL_MASK 0x3f
|
|
|
|
#define XUSB_PADCTL_USB2_OTG_PADX_CTL1(x) (0x08c + (x) * 0x40)
|
|
#define XUSB_PADCTL_USB2_OTG_PAD_CTL1_RPD_CTRL_SHIFT 26
|
|
#define XUSB_PADCTL_USB2_OTG_PAD_CTL1_RPD_CTRL_MASK 0x1f
|
|
#define XUSB_PADCTL_USB2_OTG_PAD_CTL1_TERM_RANGE_ADJ_SHIFT 3
|
|
#define XUSB_PADCTL_USB2_OTG_PAD_CTL1_TERM_RANGE_ADJ_MASK 0xf
|
|
#define XUSB_PADCTL_USB2_OTG_PAD_CTL1_PD_DR (1 << 2)
|
|
#define XUSB_PADCTL_USB2_OTG_PAD_CTL1_PD_DISC_OVRD (1 << 1)
|
|
#define XUSB_PADCTL_USB2_OTG_PAD_CTL1_PD_CHRP_OVRD (1 << 0)
|
|
#define RPD_CTRL(x) (((x) & 0x1f) << 26)
|
|
#define RPD_CTRL_VALUE(x) (((x) >> 26) & 0x1f)
|
|
|
|
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL0 0x284
|
|
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL0_PD (1 << 11)
|
|
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL0_HS_DISCON_LEVEL_SHIFT 3
|
|
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL0_HS_DISCON_LEVEL_MASK 0x7
|
|
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL0_HS_DISCON_LEVEL_VAL 0x7
|
|
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL0_HS_SQUELCH_LEVEL_SHIFT 0
|
|
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL0_HS_SQUELCH_LEVEL_MASK 0x7
|
|
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL0_HS_SQUELCH_LEVEL_VAL 0x2
|
|
|
|
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL1 0x288
|
|
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL1_PD_TRK (1 << 26)
|
|
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_DONE_RESET_TIMER_SHIFT 19
|
|
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_DONE_RESET_TIMER_MASK 0x7f
|
|
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_DONE_RESET_TIMER_VAL 0x0a
|
|
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_SHIFT 12
|
|
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_MASK 0x7f
|
|
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_VAL 0x1e
|
|
#define TCTRL_VALUE(x) (((x) & 0x3f) >> 0)
|
|
#define PCTRL_VALUE(x) (((x) >> 6) & 0x3f)
|
|
|
|
#define XUSB_PADCTL_HSIC_PADX_CTL0(x) (0x300 + (x) * 0x20)
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL0_RPU_STROBE (1 << 18)
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL0_RPU_DATA1 (1 << 17)
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL0_RPU_DATA0 (1 << 16)
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL0_RPD_STROBE (1 << 15)
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL0_RPD_DATA1 (1 << 14)
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL0_RPD_DATA0 (1 << 13)
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL0_PD_ZI_STROBE (1 << 9)
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL0_PD_ZI_DATA1 (1 << 8)
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL0_PD_ZI_DATA0 (1 << 7)
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL0_PD_RX_STROBE (1 << 6)
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL0_PD_RX_DATA1 (1 << 5)
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL0_PD_RX_DATA0 (1 << 4)
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL0_PD_TX_STROBE (1 << 3)
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL0_PD_TX_DATA1 (1 << 2)
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL0_PD_TX_DATA0 (1 << 1)
|
|
|
|
#define XUSB_PADCTL_HSIC_PADX_CTL1(x) (0x304 + (x) * 0x20)
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL1_TX_RTUNEP_SHIFT 0
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL1_TX_RTUNEP_MASK 0xf
|
|
|
|
#define XUSB_PADCTL_HSIC_PADX_CTL2(x) (0x308 + (x) * 0x20)
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL2_RX_STROBE_TRIM_SHIFT 8
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL2_RX_STROBE_TRIM_MASK 0xf
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL2_RX_DATA_TRIM_SHIFT 0
|
|
#define XUSB_PADCTL_HSIC_PAD_CTL2_RX_DATA_TRIM_MASK 0xff
|
|
|
|
#define XUSB_PADCTL_HSIC_PAD_TRK_CTL 0x340
|
|
#define XUSB_PADCTL_HSIC_PAD_TRK_CTL_PD_TRK (1 << 19)
|
|
#define XUSB_PADCTL_HSIC_PAD_TRK_CTL_TRK_DONE_RESET_TIMER_SHIFT 12
|
|
#define XUSB_PADCTL_HSIC_PAD_TRK_CTL_TRK_DONE_RESET_TIMER_MASK 0x7f
|
|
#define XUSB_PADCTL_HSIC_PAD_TRK_CTL_TRK_DONE_RESET_TIMER_VAL 0x0a
|
|
#define XUSB_PADCTL_HSIC_PAD_TRK_CTL_TRK_START_TIMER_SHIFT 5
|
|
#define XUSB_PADCTL_HSIC_PAD_TRK_CTL_TRK_START_TIMER_MASK 0x7f
|
|
#define XUSB_PADCTL_HSIC_PAD_TRK_CTL_TRK_START_TIMER_VAL 0x1e
|
|
|
|
#define XUSB_PADCTL_HSIC_STRB_TRIM_CONTROL 0x344
|
|
|
|
#define XUSB_PADCTL_UPHY_PLL_P0_CTL1 0x360
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_NDIV_SHIFT 20
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_NDIV_MASK 0xff
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_NDIV_USB_VAL 0x19
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_NDIV_SATA_VAL 0x1e
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_MDIV_SHIFT 16
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_MDIV_MASK 0x3
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL1_LOCKDET_STATUS (1 << 15)
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL1_PWR_OVRD (1 << 4)
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL1_ENABLE (1 << 3)
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL1_SLEEP_SHIFT 1
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL1_SLEEP_MASK 0x3
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL1_IDDQ (1 << 0)
|
|
|
|
#define XUSB_PADCTL_UPHY_PLL_P0_CTL2 0x364
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL2_CAL_CTRL_SHIFT 4
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL2_CAL_CTRL_MASK 0xffffff
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL2_CAL_CTRL_VAL 0x136
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL2_CAL_OVRD (1 << 2)
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL2_CAL_DONE (1 << 1)
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL2_CAL_EN (1 << 0)
|
|
|
|
#define XUSB_PADCTL_UPHY_PLL_P0_CTL4 0x36c
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL4_XDIGCLK_EN (1 << 19)
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_EN (1 << 15)
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_SEL_SHIFT 12
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_SEL_MASK 0x3
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_SEL_USB_VAL 0x2
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_SEL_SATA_VAL 0x0
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL4_REFCLKBUF_EN (1 << 8)
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL4_REFCLK_SEL_SHIFT 4
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL4_REFCLK_SEL_MASK 0xf
|
|
|
|
#define XUSB_PADCTL_UPHY_PLL_P0_CTL5 0x370
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL5_DCO_CTRL_SHIFT 16
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL5_DCO_CTRL_MASK 0xff
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL5_DCO_CTRL_VAL 0x2a
|
|
|
|
#define XUSB_PADCTL_UPHY_PLL_P0_CTL8 0x37c
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_DONE (1 << 31)
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_OVRD (1 << 15)
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_CLK_EN (1 << 13)
|
|
#define XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_EN (1 << 12)
|
|
|
|
#define XUSB_PADCTL_UPHY_MISC_PAD_PX_CTL1(x) (0x460 + (x) * 0x40)
|
|
#define XUSB_PADCTL_UPHY_MISC_PAD_CTL1_AUX_RX_IDLE_MODE_SHIFT 20
|
|
#define XUSB_PADCTL_UPHY_MISC_PAD_CTL1_AUX_RX_IDLE_MODE_MASK 0x3
|
|
#define XUSB_PADCTL_UPHY_MISC_PAD_CTL1_AUX_RX_IDLE_MODE_VAL 0x1
|
|
#define XUSB_PADCTL_UPHY_MISC_PAD_CTL1_AUX_RX_TERM_EN BIT(18)
|
|
#define XUSB_PADCTL_UPHY_MISC_PAD_CTL1_AUX_RX_MODE_OVRD BIT(13)
|
|
|
|
#define XUSB_PADCTL_UPHY_MISC_PAD_PX_CTL2(x) (0x464 + (x) * 0x40)
|
|
#define XUSB_PADCTL_UPHY_MISC_PAD_CTL2_TX_IDDQ BIT(0)
|
|
#define XUSB_PADCTL_UPHY_MISC_PAD_CTL2_TX_IDDQ_OVRD BIT(1)
|
|
#define XUSB_PADCTL_UPHY_MISC_PAD_CTL2_TX_SLEEP_MASK GENMASK(5, 4)
|
|
#define XUSB_PADCTL_UPHY_MISC_PAD_CTL2_TX_SLEEP_VAL GENMASK(5, 4)
|
|
#define XUSB_PADCTL_UPHY_MISC_PAD_CTL2_TX_PWR_OVRD BIT(24)
|
|
#define XUSB_PADCTL_UPHY_MISC_PAD_CTL2_RX_IDDQ BIT(8)
|
|
#define XUSB_PADCTL_UPHY_MISC_PAD_CTL2_RX_IDDQ_OVRD BIT(9)
|
|
#define XUSB_PADCTL_UPHY_MISC_PAD_CTL2_RX_SLEEP_MASK GENMASK(13, 12)
|
|
#define XUSB_PADCTL_UPHY_MISC_PAD_CTL2_RX_SLEEP_VAL GENMASK(13, 12)
|
|
#define XUSB_PADCTL_UPHY_MISC_PAD_CTL2_RX_PWR_OVRD BIT(25)
|
|
|
|
#define XUSB_PADCTL_UPHY_PLL_S0_CTL1 0x860
|
|
|
|
#define XUSB_PADCTL_UPHY_PLL_S0_CTL2 0x864
|
|
|
|
#define XUSB_PADCTL_UPHY_PLL_S0_CTL4 0x86c
|
|
|
|
#define XUSB_PADCTL_UPHY_PLL_S0_CTL5 0x870
|
|
|
|
#define XUSB_PADCTL_UPHY_PLL_S0_CTL8 0x87c
|
|
|
|
#define XUSB_PADCTL_UPHY_MISC_PAD_S0_CTL1 0x960
|
|
#define XUSB_PADCTL_UPHY_MISC_PAD_S0_CTL2 0x964
|
|
|
|
#define XUSB_PADCTL_UPHY_USB3_PADX_ECTL1(x) (0xa60 + (x) * 0x40)
|
|
#define XUSB_PADCTL_UPHY_USB3_PAD_ECTL1_TX_TERM_CTRL_SHIFT 16
|
|
#define XUSB_PADCTL_UPHY_USB3_PAD_ECTL1_TX_TERM_CTRL_MASK 0x3
|
|
#define XUSB_PADCTL_UPHY_USB3_PAD_ECTL1_TX_TERM_CTRL_VAL 0x2
|
|
|
|
#define XUSB_PADCTL_UPHY_USB3_PADX_ECTL2(x) (0xa64 + (x) * 0x40)
|
|
#define XUSB_PADCTL_UPHY_USB3_PAD_ECTL2_RX_CTLE_SHIFT 0
|
|
#define XUSB_PADCTL_UPHY_USB3_PAD_ECTL2_RX_CTLE_MASK 0xffff
|
|
#define XUSB_PADCTL_UPHY_USB3_PAD_ECTL2_RX_CTLE_VAL 0x00fc
|
|
|
|
#define XUSB_PADCTL_UPHY_USB3_PADX_ECTL3(x) (0xa68 + (x) * 0x40)
|
|
#define XUSB_PADCTL_UPHY_USB3_PAD_ECTL3_RX_DFE_VAL 0xc0077f1f
|
|
|
|
#define XUSB_PADCTL_UPHY_USB3_PADX_ECTL4(x) (0xa6c + (x) * 0x40)
|
|
#define XUSB_PADCTL_UPHY_USB3_PAD_ECTL4_RX_CDR_CTRL_SHIFT 16
|
|
#define XUSB_PADCTL_UPHY_USB3_PAD_ECTL4_RX_CDR_CTRL_MASK 0xffff
|
|
#define XUSB_PADCTL_UPHY_USB3_PAD_ECTL4_RX_CDR_CTRL_VAL 0x01c7
|
|
|
|
#define XUSB_PADCTL_UPHY_USB3_PADX_ECTL6(x) (0xa74 + (x) * 0x40)
|
|
#define XUSB_PADCTL_UPHY_USB3_PAD_ECTL6_RX_EQ_CTRL_H_VAL 0xfcf01368
|
|
|
|
#define XUSB_PADCTL_USB2_VBUS_ID 0xc60
|
|
#define XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_VBUS_ON (1 << 14)
|
|
#define XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_SHIFT 18
|
|
#define XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_MASK 0xf
|
|
#define XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_FLOATING 8
|
|
#define XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_GROUNDED 0
|
|
|
|
/* USB2 SLEEPWALK registers */
|
|
#define UTMIP(_port, _offset1, _offset2) \
|
|
(((_port) <= 2) ? (_offset1) : (_offset2))
|
|
|
|
#define PMC_UTMIP_UHSIC_SLEEP_CFG(x) UTMIP(x, 0x1fc, 0x4d0)
|
|
#define UTMIP_MASTER_ENABLE(x) UTMIP(x, BIT(8 * (x)), BIT(0))
|
|
#define UTMIP_FSLS_USE_PMC(x) UTMIP(x, BIT(8 * (x) + 1), \
|
|
BIT(1))
|
|
#define UTMIP_PCTRL_USE_PMC(x) UTMIP(x, BIT(8 * (x) + 2), \
|
|
BIT(2))
|
|
#define UTMIP_TCTRL_USE_PMC(x) UTMIP(x, BIT(8 * (x) + 3), \
|
|
BIT(3))
|
|
#define UTMIP_WAKE_VAL(_port, _value) (((_value) & 0xf) << \
|
|
(UTMIP(_port, 8 * (_port) + 4, 4)))
|
|
#define UTMIP_WAKE_VAL_NONE(_port) UTMIP_WAKE_VAL(_port, 12)
|
|
#define UTMIP_WAKE_VAL_ANY(_port) UTMIP_WAKE_VAL(_port, 15)
|
|
|
|
#define PMC_UTMIP_UHSIC_SLEEP_CFG1 (0x4d0)
|
|
#define UTMIP_RPU_SWITC_LOW_USE_PMC_PX(x) BIT((x) + 8)
|
|
#define UTMIP_RPD_CTRL_USE_PMC_PX(x) BIT((x) + 16)
|
|
|
|
#define PMC_UTMIP_MASTER_CONFIG (0x274)
|
|
#define UTMIP_PWR(x) UTMIP(x, BIT(x), BIT(4))
|
|
#define UHSIC_PWR BIT(3)
|
|
|
|
#define PMC_USB_DEBOUNCE_DEL (0xec)
|
|
#define DEBOUNCE_VAL(x) (((x) & 0xffff) << 0)
|
|
#define UTMIP_LINE_DEB_CNT(x) (((x) & 0xf) << 16)
|
|
#define UHSIC_LINE_DEB_CNT(x) (((x) & 0xf) << 20)
|
|
|
|
#define PMC_UTMIP_UHSIC_FAKE(x) UTMIP(x, 0x218, 0x294)
|
|
#define UTMIP_FAKE_USBOP_VAL(x) UTMIP(x, BIT(4 * (x)), BIT(8))
|
|
#define UTMIP_FAKE_USBON_VAL(x) UTMIP(x, BIT(4 * (x) + 1), \
|
|
BIT(9))
|
|
#define UTMIP_FAKE_USBOP_EN(x) UTMIP(x, BIT(4 * (x) + 2), \
|
|
BIT(10))
|
|
#define UTMIP_FAKE_USBON_EN(x) UTMIP(x, BIT(4 * (x) + 3), \
|
|
BIT(11))
|
|
|
|
#define PMC_UTMIP_UHSIC_SLEEPWALK_CFG(x) UTMIP(x, 0x200, 0x288)
|
|
#define UTMIP_LINEVAL_WALK_EN(x) UTMIP(x, BIT(8 * (x) + 7), \
|
|
BIT(15))
|
|
|
|
#define PMC_USB_AO (0xf0)
|
|
#define USBOP_VAL_PD(x) UTMIP(x, BIT(4 * (x)), BIT(20))
|
|
#define USBON_VAL_PD(x) UTMIP(x, BIT(4 * (x) + 1), \
|
|
BIT(21))
|
|
#define STROBE_VAL_PD BIT(12)
|
|
#define DATA0_VAL_PD BIT(13)
|
|
#define DATA1_VAL_PD BIT(24)
|
|
|
|
#define PMC_UTMIP_UHSIC_SAVED_STATE(x) UTMIP(x, 0x1f0, 0x280)
|
|
#define SPEED(_port, _value) (((_value) & 0x3) << \
|
|
(UTMIP(_port, 8 * (_port), 8)))
|
|
#define UTMI_HS(_port) SPEED(_port, 0)
|
|
#define UTMI_FS(_port) SPEED(_port, 1)
|
|
#define UTMI_LS(_port) SPEED(_port, 2)
|
|
#define UTMI_RST(_port) SPEED(_port, 3)
|
|
|
|
#define PMC_UTMIP_UHSIC_TRIGGERS (0x1ec)
|
|
#define UTMIP_CLR_WALK_PTR(x) UTMIP(x, BIT(x), BIT(16))
|
|
#define UTMIP_CAP_CFG(x) UTMIP(x, BIT((x) + 4), BIT(17))
|
|
#define UTMIP_CLR_WAKE_ALARM(x) UTMIP(x, BIT((x) + 12), \
|
|
BIT(19))
|
|
#define UHSIC_CLR_WALK_PTR BIT(3)
|
|
#define UHSIC_CLR_WAKE_ALARM BIT(15)
|
|
|
|
#define PMC_UTMIP_SLEEPWALK_PX(x) UTMIP(x, 0x204 + (4 * (x)), \
|
|
0x4e0)
|
|
/* phase A */
|
|
#define UTMIP_USBOP_RPD_A BIT(0)
|
|
#define UTMIP_USBON_RPD_A BIT(1)
|
|
#define UTMIP_AP_A BIT(4)
|
|
#define UTMIP_AN_A BIT(5)
|
|
#define UTMIP_HIGHZ_A BIT(6)
|
|
/* phase B */
|
|
#define UTMIP_USBOP_RPD_B BIT(8)
|
|
#define UTMIP_USBON_RPD_B BIT(9)
|
|
#define UTMIP_AP_B BIT(12)
|
|
#define UTMIP_AN_B BIT(13)
|
|
#define UTMIP_HIGHZ_B BIT(14)
|
|
/* phase C */
|
|
#define UTMIP_USBOP_RPD_C BIT(16)
|
|
#define UTMIP_USBON_RPD_C BIT(17)
|
|
#define UTMIP_AP_C BIT(20)
|
|
#define UTMIP_AN_C BIT(21)
|
|
#define UTMIP_HIGHZ_C BIT(22)
|
|
/* phase D */
|
|
#define UTMIP_USBOP_RPD_D BIT(24)
|
|
#define UTMIP_USBON_RPD_D BIT(25)
|
|
#define UTMIP_AP_D BIT(28)
|
|
#define UTMIP_AN_D BIT(29)
|
|
#define UTMIP_HIGHZ_D BIT(30)
|
|
|
|
#define PMC_UTMIP_UHSIC_LINE_WAKEUP (0x26c)
|
|
#define UTMIP_LINE_WAKEUP_EN(x) UTMIP(x, BIT(x), BIT(4))
|
|
#define UHSIC_LINE_WAKEUP_EN BIT(3)
|
|
|
|
#define PMC_UTMIP_TERM_PAD_CFG (0x1f8)
|
|
#define PCTRL_VAL(x) (((x) & 0x3f) << 1)
|
|
#define TCTRL_VAL(x) (((x) & 0x3f) << 7)
|
|
|
|
#define PMC_UTMIP_PAD_CFGX(x) (0x4c0 + (4 * (x)))
|
|
#define RPD_CTRL_PX(x) (((x) & 0x1f) << 22)
|
|
|
|
#define PMC_UHSIC_SLEEP_CFG PMC_UTMIP_UHSIC_SLEEP_CFG(0)
|
|
#define UHSIC_MASTER_ENABLE BIT(24)
|
|
#define UHSIC_WAKE_VAL(_value) (((_value) & 0xf) << 28)
|
|
#define UHSIC_WAKE_VAL_SD10 UHSIC_WAKE_VAL(2)
|
|
#define UHSIC_WAKE_VAL_NONE UHSIC_WAKE_VAL(12)
|
|
|
|
#define PMC_UHSIC_FAKE PMC_UTMIP_UHSIC_FAKE(0)
|
|
#define UHSIC_FAKE_STROBE_VAL BIT(12)
|
|
#define UHSIC_FAKE_DATA_VAL BIT(13)
|
|
#define UHSIC_FAKE_STROBE_EN BIT(14)
|
|
#define UHSIC_FAKE_DATA_EN BIT(15)
|
|
|
|
#define PMC_UHSIC_SAVED_STATE PMC_UTMIP_UHSIC_SAVED_STATE(0)
|
|
#define UHSIC_MODE(_value) (((_value) & 0x1) << 24)
|
|
#define UHSIC_HS UHSIC_MODE(0)
|
|
#define UHSIC_RST UHSIC_MODE(1)
|
|
|
|
#define PMC_UHSIC_SLEEPWALK_CFG PMC_UTMIP_UHSIC_SLEEPWALK_CFG(0)
|
|
#define UHSIC_WAKE_WALK_EN BIT(30)
|
|
#define UHSIC_LINEVAL_WALK_EN BIT(31)
|
|
|
|
#define PMC_UHSIC_SLEEPWALK_P0 (0x210)
|
|
#define UHSIC_DATA0_RPD_A BIT(1)
|
|
#define UHSIC_DATA0_RPU_B BIT(11)
|
|
#define UHSIC_DATA0_RPU_C BIT(19)
|
|
#define UHSIC_DATA0_RPU_D BIT(27)
|
|
#define UHSIC_STROBE_RPU_A BIT(2)
|
|
#define UHSIC_STROBE_RPD_B BIT(8)
|
|
#define UHSIC_STROBE_RPD_C BIT(16)
|
|
#define UHSIC_STROBE_RPD_D BIT(24)
|
|
|
|
struct tegra210_xusb_fuse_calibration {
|
|
u32 hs_curr_level[4];
|
|
u32 hs_term_range_adj;
|
|
u32 rpd_ctrl;
|
|
};
|
|
|
|
struct tegra210_xusb_padctl_context {
|
|
u32 usb2_pad_mux;
|
|
u32 usb2_port_cap;
|
|
u32 ss_port_map;
|
|
u32 usb3_pad_mux;
|
|
};
|
|
|
|
struct tegra210_xusb_padctl {
|
|
struct tegra_xusb_padctl base;
|
|
struct regmap *regmap;
|
|
|
|
struct tegra210_xusb_fuse_calibration fuse;
|
|
struct tegra210_xusb_padctl_context context;
|
|
};
|
|
|
|
static inline struct tegra210_xusb_padctl *
|
|
to_tegra210_xusb_padctl(struct tegra_xusb_padctl *padctl)
|
|
{
|
|
return container_of(padctl, struct tegra210_xusb_padctl, base);
|
|
}
|
|
|
|
static const struct tegra_xusb_lane_map tegra210_usb3_map[] = {
|
|
{ 0, "pcie", 6 },
|
|
{ 1, "pcie", 5 },
|
|
{ 2, "pcie", 0 },
|
|
{ 2, "pcie", 3 },
|
|
{ 3, "pcie", 4 },
|
|
{ 3, "sata", 0 },
|
|
{ 0, NULL, 0 }
|
|
};
|
|
|
|
static int tegra210_usb3_lane_map(struct tegra_xusb_lane *lane)
|
|
{
|
|
const struct tegra_xusb_lane_map *map;
|
|
|
|
for (map = tegra210_usb3_map; map->type; map++) {
|
|
if (map->index == lane->index &&
|
|
strcmp(map->type, lane->pad->soc->name) == 0) {
|
|
dev_dbg(lane->pad->padctl->dev, "lane = %s map to port = usb3-%d\n",
|
|
lane->pad->soc->lanes[lane->index].name, map->port);
|
|
return map->port;
|
|
}
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* must be called under padctl->lock */
|
|
static int tegra210_pex_uphy_enable(struct tegra_xusb_padctl *padctl)
|
|
{
|
|
struct tegra_xusb_pcie_pad *pcie = to_pcie_pad(padctl->pcie);
|
|
unsigned long timeout;
|
|
u32 value;
|
|
unsigned int i;
|
|
int err;
|
|
|
|
if (pcie->enable)
|
|
return 0;
|
|
|
|
err = clk_prepare_enable(pcie->pll);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
if (tegra210_plle_hw_sequence_is_enabled())
|
|
goto skip_pll_init;
|
|
|
|
err = reset_control_deassert(pcie->rst);
|
|
if (err < 0)
|
|
goto disable;
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL2);
|
|
value &= ~(XUSB_PADCTL_UPHY_PLL_CTL2_CAL_CTRL_MASK <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL2_CAL_CTRL_SHIFT);
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL2_CAL_CTRL_VAL <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL2_CAL_CTRL_SHIFT;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL2);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL5);
|
|
value &= ~(XUSB_PADCTL_UPHY_PLL_CTL5_DCO_CTRL_MASK <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL5_DCO_CTRL_SHIFT);
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL5_DCO_CTRL_VAL <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL5_DCO_CTRL_SHIFT;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL5);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL1_PWR_OVRD;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL2);
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL2_CAL_OVRD;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL2);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL8);
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_OVRD;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL8);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL4);
|
|
value &= ~((XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_SEL_MASK <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_SEL_SHIFT) |
|
|
(XUSB_PADCTL_UPHY_PLL_CTL4_REFCLK_SEL_MASK <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL4_REFCLK_SEL_SHIFT));
|
|
value |= (XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_SEL_USB_VAL <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_SEL_SHIFT) |
|
|
XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_EN;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL4);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
|
|
value &= ~((XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_MDIV_MASK <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_MDIV_SHIFT) |
|
|
(XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_NDIV_MASK <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_NDIV_SHIFT));
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_NDIV_USB_VAL <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_NDIV_SHIFT;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
|
|
value &= ~XUSB_PADCTL_UPHY_PLL_CTL1_IDDQ;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
|
|
value &= ~(XUSB_PADCTL_UPHY_PLL_CTL1_SLEEP_MASK <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL1_SLEEP_SHIFT);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
|
|
|
|
usleep_range(10, 20);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL4);
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL4_REFCLKBUF_EN;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL4);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL2);
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL2_CAL_EN;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL2);
|
|
|
|
timeout = jiffies + msecs_to_jiffies(100);
|
|
|
|
while (time_before(jiffies, timeout)) {
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL2);
|
|
if (value & XUSB_PADCTL_UPHY_PLL_CTL2_CAL_DONE)
|
|
break;
|
|
|
|
usleep_range(10, 20);
|
|
}
|
|
|
|
if (time_after_eq(jiffies, timeout)) {
|
|
err = -ETIMEDOUT;
|
|
goto reset;
|
|
}
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL2);
|
|
value &= ~XUSB_PADCTL_UPHY_PLL_CTL2_CAL_EN;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL2);
|
|
|
|
timeout = jiffies + msecs_to_jiffies(100);
|
|
|
|
while (time_before(jiffies, timeout)) {
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL2);
|
|
if (!(value & XUSB_PADCTL_UPHY_PLL_CTL2_CAL_DONE))
|
|
break;
|
|
|
|
usleep_range(10, 20);
|
|
}
|
|
|
|
if (time_after_eq(jiffies, timeout)) {
|
|
err = -ETIMEDOUT;
|
|
goto reset;
|
|
}
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL1_ENABLE;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
|
|
|
|
timeout = jiffies + msecs_to_jiffies(100);
|
|
|
|
while (time_before(jiffies, timeout)) {
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
|
|
if (value & XUSB_PADCTL_UPHY_PLL_CTL1_LOCKDET_STATUS)
|
|
break;
|
|
|
|
usleep_range(10, 20);
|
|
}
|
|
|
|
if (time_after_eq(jiffies, timeout)) {
|
|
err = -ETIMEDOUT;
|
|
goto reset;
|
|
}
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL8);
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_EN |
|
|
XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_CLK_EN;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL8);
|
|
|
|
timeout = jiffies + msecs_to_jiffies(100);
|
|
|
|
while (time_before(jiffies, timeout)) {
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL8);
|
|
if (value & XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_DONE)
|
|
break;
|
|
|
|
usleep_range(10, 20);
|
|
}
|
|
|
|
if (time_after_eq(jiffies, timeout)) {
|
|
err = -ETIMEDOUT;
|
|
goto reset;
|
|
}
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL8);
|
|
value &= ~XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_EN;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL8);
|
|
|
|
timeout = jiffies + msecs_to_jiffies(100);
|
|
|
|
while (time_before(jiffies, timeout)) {
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL8);
|
|
if (!(value & XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_DONE))
|
|
break;
|
|
|
|
usleep_range(10, 20);
|
|
}
|
|
|
|
if (time_after_eq(jiffies, timeout)) {
|
|
err = -ETIMEDOUT;
|
|
goto reset;
|
|
}
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL8);
|
|
value &= ~XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_CLK_EN;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL8);
|
|
|
|
tegra210_xusb_pll_hw_control_enable();
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
|
|
value &= ~XUSB_PADCTL_UPHY_PLL_CTL1_PWR_OVRD;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL2);
|
|
value &= ~XUSB_PADCTL_UPHY_PLL_CTL2_CAL_OVRD;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL2);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL8);
|
|
value &= ~XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_OVRD;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL8);
|
|
|
|
usleep_range(10, 20);
|
|
|
|
tegra210_xusb_pll_hw_sequence_start();
|
|
|
|
skip_pll_init:
|
|
pcie->enable = true;
|
|
|
|
for (i = 0; i < padctl->pcie->soc->num_lanes; i++) {
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB3_PAD_MUX);
|
|
value |= XUSB_PADCTL_USB3_PAD_MUX_PCIE_IDDQ_DISABLE(i);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB3_PAD_MUX);
|
|
}
|
|
|
|
return 0;
|
|
|
|
reset:
|
|
reset_control_assert(pcie->rst);
|
|
disable:
|
|
clk_disable_unprepare(pcie->pll);
|
|
return err;
|
|
}
|
|
|
|
static void tegra210_pex_uphy_disable(struct tegra_xusb_padctl *padctl)
|
|
{
|
|
struct tegra_xusb_pcie_pad *pcie = to_pcie_pad(padctl->pcie);
|
|
u32 value;
|
|
unsigned int i;
|
|
|
|
if (WARN_ON(!pcie->enable))
|
|
return;
|
|
|
|
pcie->enable = false;
|
|
|
|
for (i = 0; i < padctl->pcie->soc->num_lanes; i++) {
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB3_PAD_MUX);
|
|
value &= ~XUSB_PADCTL_USB3_PAD_MUX_PCIE_IDDQ_DISABLE(i);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB3_PAD_MUX);
|
|
}
|
|
|
|
clk_disable_unprepare(pcie->pll);
|
|
}
|
|
|
|
/* must be called under padctl->lock */
|
|
static int tegra210_sata_uphy_enable(struct tegra_xusb_padctl *padctl)
|
|
{
|
|
struct tegra_xusb_sata_pad *sata = to_sata_pad(padctl->sata);
|
|
struct tegra_xusb_lane *lane = tegra_xusb_find_lane(padctl, "sata", 0);
|
|
unsigned long timeout;
|
|
u32 value;
|
|
unsigned int i;
|
|
int err;
|
|
bool usb;
|
|
|
|
if (sata->enable)
|
|
return 0;
|
|
|
|
if (IS_ERR(lane))
|
|
return 0;
|
|
|
|
if (tegra210_plle_hw_sequence_is_enabled())
|
|
goto skip_pll_init;
|
|
|
|
usb = tegra_xusb_lane_check(lane, "usb3-ss");
|
|
|
|
err = clk_prepare_enable(sata->pll);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = reset_control_deassert(sata->rst);
|
|
if (err < 0)
|
|
goto disable;
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL2);
|
|
value &= ~(XUSB_PADCTL_UPHY_PLL_CTL2_CAL_CTRL_MASK <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL2_CAL_CTRL_SHIFT);
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL2_CAL_CTRL_VAL <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL2_CAL_CTRL_SHIFT;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL2);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL5);
|
|
value &= ~(XUSB_PADCTL_UPHY_PLL_CTL5_DCO_CTRL_MASK <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL5_DCO_CTRL_SHIFT);
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL5_DCO_CTRL_VAL <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL5_DCO_CTRL_SHIFT;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL5);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL1);
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL1_PWR_OVRD;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL1);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL2);
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL2_CAL_OVRD;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL2);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL8);
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_OVRD;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL8);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL4);
|
|
value &= ~((XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_SEL_MASK <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_SEL_SHIFT) |
|
|
(XUSB_PADCTL_UPHY_PLL_CTL4_REFCLK_SEL_MASK <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL4_REFCLK_SEL_SHIFT));
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_EN;
|
|
|
|
if (usb)
|
|
value |= (XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_SEL_USB_VAL <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_SEL_SHIFT);
|
|
else
|
|
value |= (XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_SEL_SATA_VAL <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL4_TXCLKREF_SEL_SHIFT);
|
|
|
|
value &= ~XUSB_PADCTL_UPHY_PLL_CTL4_XDIGCLK_EN;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL4);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL1);
|
|
value &= ~((XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_MDIV_MASK <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_MDIV_SHIFT) |
|
|
(XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_NDIV_MASK <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_NDIV_SHIFT));
|
|
|
|
if (usb)
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_NDIV_USB_VAL <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_NDIV_SHIFT;
|
|
else
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_NDIV_SATA_VAL <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL1_FREQ_NDIV_SHIFT;
|
|
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL1);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL1);
|
|
value &= ~XUSB_PADCTL_UPHY_PLL_CTL1_IDDQ;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL1);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL1);
|
|
value &= ~(XUSB_PADCTL_UPHY_PLL_CTL1_SLEEP_MASK <<
|
|
XUSB_PADCTL_UPHY_PLL_CTL1_SLEEP_SHIFT);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL1);
|
|
|
|
usleep_range(10, 20);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL4);
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL4_REFCLKBUF_EN;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL4);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL2);
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL2_CAL_EN;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL2);
|
|
|
|
timeout = jiffies + msecs_to_jiffies(100);
|
|
|
|
while (time_before(jiffies, timeout)) {
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL2);
|
|
if (value & XUSB_PADCTL_UPHY_PLL_CTL2_CAL_DONE)
|
|
break;
|
|
|
|
usleep_range(10, 20);
|
|
}
|
|
|
|
if (time_after_eq(jiffies, timeout)) {
|
|
err = -ETIMEDOUT;
|
|
goto reset;
|
|
}
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL2);
|
|
value &= ~XUSB_PADCTL_UPHY_PLL_CTL2_CAL_EN;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL2);
|
|
|
|
timeout = jiffies + msecs_to_jiffies(100);
|
|
|
|
while (time_before(jiffies, timeout)) {
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL2);
|
|
if (!(value & XUSB_PADCTL_UPHY_PLL_CTL2_CAL_DONE))
|
|
break;
|
|
|
|
usleep_range(10, 20);
|
|
}
|
|
|
|
if (time_after_eq(jiffies, timeout)) {
|
|
err = -ETIMEDOUT;
|
|
goto reset;
|
|
}
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL1);
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL1_ENABLE;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL1);
|
|
|
|
timeout = jiffies + msecs_to_jiffies(100);
|
|
|
|
while (time_before(jiffies, timeout)) {
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL1);
|
|
if (value & XUSB_PADCTL_UPHY_PLL_CTL1_LOCKDET_STATUS)
|
|
break;
|
|
|
|
usleep_range(10, 20);
|
|
}
|
|
|
|
if (time_after_eq(jiffies, timeout)) {
|
|
err = -ETIMEDOUT;
|
|
goto reset;
|
|
}
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL8);
|
|
value |= XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_EN |
|
|
XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_CLK_EN;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL8);
|
|
|
|
timeout = jiffies + msecs_to_jiffies(100);
|
|
|
|
while (time_before(jiffies, timeout)) {
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL8);
|
|
if (value & XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_DONE)
|
|
break;
|
|
|
|
usleep_range(10, 20);
|
|
}
|
|
|
|
if (time_after_eq(jiffies, timeout)) {
|
|
err = -ETIMEDOUT;
|
|
goto reset;
|
|
}
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL8);
|
|
value &= ~XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_EN;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL8);
|
|
|
|
timeout = jiffies + msecs_to_jiffies(100);
|
|
|
|
while (time_before(jiffies, timeout)) {
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL8);
|
|
if (!(value & XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_DONE))
|
|
break;
|
|
|
|
usleep_range(10, 20);
|
|
}
|
|
|
|
if (time_after_eq(jiffies, timeout)) {
|
|
err = -ETIMEDOUT;
|
|
goto reset;
|
|
}
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL8);
|
|
value &= ~XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_CLK_EN;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL8);
|
|
|
|
tegra210_sata_pll_hw_control_enable();
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL1);
|
|
value &= ~XUSB_PADCTL_UPHY_PLL_CTL1_PWR_OVRD;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL1);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL2);
|
|
value &= ~XUSB_PADCTL_UPHY_PLL_CTL2_CAL_OVRD;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL2);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_S0_CTL8);
|
|
value &= ~XUSB_PADCTL_UPHY_PLL_CTL8_RCAL_OVRD;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_S0_CTL8);
|
|
|
|
usleep_range(10, 20);
|
|
|
|
tegra210_sata_pll_hw_sequence_start();
|
|
|
|
skip_pll_init:
|
|
sata->enable = true;
|
|
|
|
for (i = 0; i < padctl->sata->soc->num_lanes; i++) {
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB3_PAD_MUX);
|
|
value |= XUSB_PADCTL_USB3_PAD_MUX_SATA_IDDQ_DISABLE(i);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB3_PAD_MUX);
|
|
}
|
|
|
|
return 0;
|
|
|
|
reset:
|
|
reset_control_assert(sata->rst);
|
|
disable:
|
|
clk_disable_unprepare(sata->pll);
|
|
return err;
|
|
}
|
|
|
|
static void tegra210_sata_uphy_disable(struct tegra_xusb_padctl *padctl)
|
|
{
|
|
struct tegra_xusb_sata_pad *sata = to_sata_pad(padctl->sata);
|
|
u32 value;
|
|
unsigned int i;
|
|
|
|
if (WARN_ON(!sata->enable))
|
|
return;
|
|
|
|
sata->enable = false;
|
|
|
|
for (i = 0; i < padctl->sata->soc->num_lanes; i++) {
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB3_PAD_MUX);
|
|
value &= ~XUSB_PADCTL_USB3_PAD_MUX_SATA_IDDQ_DISABLE(i);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB3_PAD_MUX);
|
|
}
|
|
|
|
clk_disable_unprepare(sata->pll);
|
|
}
|
|
|
|
static void tegra210_aux_mux_lp0_clamp_disable(struct tegra_xusb_padctl *padctl)
|
|
{
|
|
u32 value;
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
value &= ~XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_CLAMP_EN;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
|
|
usleep_range(100, 200);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
value &= ~XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_CLAMP_EN_EARLY;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
|
|
usleep_range(100, 200);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
value &= ~XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_VCORE_DOWN;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
}
|
|
|
|
static void tegra210_aux_mux_lp0_clamp_enable(struct tegra_xusb_padctl *padctl)
|
|
{
|
|
u32 value;
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
value |= XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_VCORE_DOWN;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
|
|
usleep_range(100, 200);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
value |= XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_CLAMP_EN_EARLY;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
|
|
usleep_range(100, 200);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
value |= XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_CLAMP_EN;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
}
|
|
|
|
static int tegra210_uphy_init(struct tegra_xusb_padctl *padctl)
|
|
{
|
|
if (padctl->pcie)
|
|
tegra210_pex_uphy_enable(padctl);
|
|
|
|
if (padctl->sata)
|
|
tegra210_sata_uphy_enable(padctl);
|
|
|
|
if (!tegra210_plle_hw_sequence_is_enabled())
|
|
tegra210_plle_hw_sequence_start();
|
|
else
|
|
dev_dbg(padctl->dev, "PLLE is already in HW control\n");
|
|
|
|
tegra210_aux_mux_lp0_clamp_disable(padctl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __maybe_unused
|
|
tegra210_uphy_deinit(struct tegra_xusb_padctl *padctl)
|
|
{
|
|
tegra210_aux_mux_lp0_clamp_enable(padctl);
|
|
|
|
if (padctl->sata)
|
|
tegra210_sata_uphy_disable(padctl);
|
|
|
|
if (padctl->pcie)
|
|
tegra210_pex_uphy_disable(padctl);
|
|
}
|
|
|
|
static int tegra210_hsic_set_idle(struct tegra_xusb_padctl *padctl,
|
|
unsigned int index, bool idle)
|
|
{
|
|
u32 value;
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_HSIC_PADX_CTL0(index));
|
|
|
|
value &= ~(XUSB_PADCTL_HSIC_PAD_CTL0_RPU_DATA0 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_RPU_DATA1 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_RPD_STROBE);
|
|
|
|
if (idle)
|
|
value |= XUSB_PADCTL_HSIC_PAD_CTL0_RPD_DATA0 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_RPD_DATA1 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_RPU_STROBE;
|
|
else
|
|
value &= ~(XUSB_PADCTL_HSIC_PAD_CTL0_RPD_DATA0 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_RPD_DATA1 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_RPU_STROBE);
|
|
|
|
padctl_writel(padctl, value, XUSB_PADCTL_HSIC_PADX_CTL0(index));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra210_usb3_enable_phy_sleepwalk(struct tegra_xusb_lane *lane,
|
|
enum usb_device_speed speed)
|
|
{
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
int port = tegra210_usb3_lane_map(lane);
|
|
struct device *dev = padctl->dev;
|
|
u32 value;
|
|
|
|
if (port < 0) {
|
|
dev_err(dev, "invalid usb3 port number\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
mutex_lock(&padctl->lock);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
value |= XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN_EARLY(port);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
|
|
usleep_range(100, 200);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
value |= XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN(port);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
|
|
usleep_range(250, 350);
|
|
|
|
mutex_unlock(&padctl->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra210_usb3_disable_phy_sleepwalk(struct tegra_xusb_lane *lane)
|
|
{
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
int port = tegra210_usb3_lane_map(lane);
|
|
struct device *dev = padctl->dev;
|
|
u32 value;
|
|
|
|
if (port < 0) {
|
|
dev_err(dev, "invalid usb3 port number\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
mutex_lock(&padctl->lock);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
value &= ~XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN_EARLY(port);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
|
|
usleep_range(100, 200);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
value &= ~XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN(port);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
|
|
mutex_unlock(&padctl->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra210_usb3_enable_phy_wake(struct tegra_xusb_lane *lane)
|
|
{
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
int port = tegra210_usb3_lane_map(lane);
|
|
struct device *dev = padctl->dev;
|
|
u32 value;
|
|
|
|
if (port < 0) {
|
|
dev_err(dev, "invalid usb3 port number\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
mutex_lock(&padctl->lock);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
|
|
value &= ~ALL_WAKE_EVENTS;
|
|
value |= SS_PORT_WAKEUP_EVENT(port);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0);
|
|
|
|
usleep_range(10, 20);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
|
|
value &= ~ALL_WAKE_EVENTS;
|
|
value |= SS_PORT_WAKE_INTERRUPT_ENABLE(port);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0);
|
|
|
|
mutex_unlock(&padctl->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra210_usb3_disable_phy_wake(struct tegra_xusb_lane *lane)
|
|
{
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
int port = tegra210_usb3_lane_map(lane);
|
|
struct device *dev = padctl->dev;
|
|
u32 value;
|
|
|
|
if (port < 0) {
|
|
dev_err(dev, "invalid usb3 port number\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
mutex_lock(&padctl->lock);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
|
|
value &= ~ALL_WAKE_EVENTS;
|
|
value &= ~SS_PORT_WAKE_INTERRUPT_ENABLE(port);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0);
|
|
|
|
usleep_range(10, 20);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
|
|
value &= ~ALL_WAKE_EVENTS;
|
|
value |= SS_PORT_WAKEUP_EVENT(port);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0);
|
|
|
|
mutex_unlock(&padctl->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool tegra210_usb3_phy_remote_wake_detected(struct tegra_xusb_lane *lane)
|
|
{
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
int index = tegra210_usb3_lane_map(lane);
|
|
u32 value;
|
|
|
|
if (index < 0)
|
|
return false;
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
|
|
if ((value & SS_PORT_WAKE_INTERRUPT_ENABLE(index)) && (value & SS_PORT_WAKEUP_EVENT(index)))
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
static int tegra210_utmi_enable_phy_wake(struct tegra_xusb_lane *lane)
|
|
{
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
unsigned int index = lane->index;
|
|
u32 value;
|
|
|
|
mutex_lock(&padctl->lock);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
|
|
value &= ~ALL_WAKE_EVENTS;
|
|
value |= USB2_PORT_WAKEUP_EVENT(index);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0);
|
|
|
|
usleep_range(10, 20);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
|
|
value &= ~ALL_WAKE_EVENTS;
|
|
value |= USB2_PORT_WAKE_INTERRUPT_ENABLE(index);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0);
|
|
|
|
mutex_unlock(&padctl->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra210_utmi_disable_phy_wake(struct tegra_xusb_lane *lane)
|
|
{
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
unsigned int index = lane->index;
|
|
u32 value;
|
|
|
|
mutex_lock(&padctl->lock);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
|
|
value &= ~ALL_WAKE_EVENTS;
|
|
value &= ~USB2_PORT_WAKE_INTERRUPT_ENABLE(index);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0);
|
|
|
|
usleep_range(10, 20);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
|
|
value &= ~ALL_WAKE_EVENTS;
|
|
value |= USB2_PORT_WAKEUP_EVENT(index);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0);
|
|
|
|
mutex_unlock(&padctl->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool tegra210_utmi_phy_remote_wake_detected(struct tegra_xusb_lane *lane)
|
|
{
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
unsigned int index = lane->index;
|
|
u32 value;
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
|
|
if ((value & USB2_PORT_WAKE_INTERRUPT_ENABLE(index)) &&
|
|
(value & USB2_PORT_WAKEUP_EVENT(index)))
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
static int tegra210_hsic_enable_phy_wake(struct tegra_xusb_lane *lane)
|
|
{
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
unsigned int index = lane->index;
|
|
u32 value;
|
|
|
|
mutex_lock(&padctl->lock);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
|
|
value &= ~ALL_WAKE_EVENTS;
|
|
value |= USB2_HSIC_PORT_WAKEUP_EVENT(index);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0);
|
|
|
|
usleep_range(10, 20);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
|
|
value &= ~ALL_WAKE_EVENTS;
|
|
value |= USB2_HSIC_PORT_WAKE_INTERRUPT_ENABLE(index);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0);
|
|
|
|
mutex_unlock(&padctl->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra210_hsic_disable_phy_wake(struct tegra_xusb_lane *lane)
|
|
{
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
unsigned int index = lane->index;
|
|
u32 value;
|
|
|
|
mutex_lock(&padctl->lock);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
|
|
value &= ~ALL_WAKE_EVENTS;
|
|
value &= ~USB2_HSIC_PORT_WAKE_INTERRUPT_ENABLE(index);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0);
|
|
|
|
usleep_range(10, 20);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
|
|
value &= ~ALL_WAKE_EVENTS;
|
|
value |= USB2_HSIC_PORT_WAKEUP_EVENT(index);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0);
|
|
|
|
mutex_unlock(&padctl->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool tegra210_hsic_phy_remote_wake_detected(struct tegra_xusb_lane *lane)
|
|
{
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
unsigned int index = lane->index;
|
|
u32 value;
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
|
|
if ((value & USB2_HSIC_PORT_WAKE_INTERRUPT_ENABLE(index)) &&
|
|
(value & USB2_HSIC_PORT_WAKEUP_EVENT(index)))
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
#define padctl_pmc_readl(_priv, _offset) \
|
|
({ \
|
|
u32 value; \
|
|
WARN(regmap_read(_priv->regmap, _offset, &value), "read %s failed\n", #_offset);\
|
|
value; \
|
|
})
|
|
|
|
#define padctl_pmc_writel(_priv, _value, _offset) \
|
|
WARN(regmap_write(_priv->regmap, _offset, _value), "write %s failed\n", #_offset)
|
|
|
|
static int tegra210_pmc_utmi_enable_phy_sleepwalk(struct tegra_xusb_lane *lane,
|
|
enum usb_device_speed speed)
|
|
{
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
struct tegra210_xusb_padctl *priv = to_tegra210_xusb_padctl(padctl);
|
|
unsigned int port = lane->index;
|
|
u32 value, tctrl, pctrl, rpd_ctrl;
|
|
|
|
if (!priv->regmap)
|
|
return -EOPNOTSUPP;
|
|
|
|
if (speed > USB_SPEED_HIGH)
|
|
return -EINVAL;
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
|
|
tctrl = TCTRL_VALUE(value);
|
|
pctrl = PCTRL_VALUE(value);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(port));
|
|
rpd_ctrl = RPD_CTRL_VALUE(value);
|
|
|
|
/* ensure sleepwalk logic is disabled */
|
|
value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
|
|
value &= ~UTMIP_MASTER_ENABLE(port);
|
|
padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
|
|
|
|
/* ensure sleepwalk logics are in low power mode */
|
|
value = padctl_pmc_readl(priv, PMC_UTMIP_MASTER_CONFIG);
|
|
value |= UTMIP_PWR(port);
|
|
padctl_pmc_writel(priv, value, PMC_UTMIP_MASTER_CONFIG);
|
|
|
|
/* set debounce time */
|
|
value = padctl_pmc_readl(priv, PMC_USB_DEBOUNCE_DEL);
|
|
value &= ~UTMIP_LINE_DEB_CNT(~0);
|
|
value |= UTMIP_LINE_DEB_CNT(0x1);
|
|
padctl_pmc_writel(priv, value, PMC_USB_DEBOUNCE_DEL);
|
|
|
|
/* ensure fake events of sleepwalk logic are desiabled */
|
|
value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_FAKE(port));
|
|
value &= ~(UTMIP_FAKE_USBOP_VAL(port) | UTMIP_FAKE_USBON_VAL(port) |
|
|
UTMIP_FAKE_USBOP_EN(port) | UTMIP_FAKE_USBON_EN(port));
|
|
padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_FAKE(port));
|
|
|
|
/* ensure wake events of sleepwalk logic are not latched */
|
|
value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_LINE_WAKEUP);
|
|
value &= ~UTMIP_LINE_WAKEUP_EN(port);
|
|
padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_LINE_WAKEUP);
|
|
|
|
/* disable wake event triggers of sleepwalk logic */
|
|
value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
|
|
value &= ~UTMIP_WAKE_VAL(port, ~0);
|
|
value |= UTMIP_WAKE_VAL_NONE(port);
|
|
padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
|
|
|
|
/* power down the line state detectors of the pad */
|
|
value = padctl_pmc_readl(priv, PMC_USB_AO);
|
|
value |= (USBOP_VAL_PD(port) | USBON_VAL_PD(port));
|
|
padctl_pmc_writel(priv, value, PMC_USB_AO);
|
|
|
|
/* save state per speed */
|
|
value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SAVED_STATE(port));
|
|
value &= ~SPEED(port, ~0);
|
|
|
|
switch (speed) {
|
|
case USB_SPEED_HIGH:
|
|
value |= UTMI_HS(port);
|
|
break;
|
|
|
|
case USB_SPEED_FULL:
|
|
value |= UTMI_FS(port);
|
|
break;
|
|
|
|
case USB_SPEED_LOW:
|
|
value |= UTMI_LS(port);
|
|
break;
|
|
|
|
default:
|
|
value |= UTMI_RST(port);
|
|
break;
|
|
}
|
|
|
|
padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SAVED_STATE(port));
|
|
|
|
/* enable the trigger of the sleepwalk logic */
|
|
value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEPWALK_CFG(port));
|
|
value |= UTMIP_LINEVAL_WALK_EN(port);
|
|
padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEPWALK_CFG(port));
|
|
|
|
/*
|
|
* Reset the walk pointer and clear the alarm of the sleepwalk logic,
|
|
* as well as capture the configuration of the USB2.0 pad.
|
|
*/
|
|
value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_TRIGGERS);
|
|
value |= UTMIP_CLR_WALK_PTR(port) | UTMIP_CLR_WAKE_ALARM(port) | UTMIP_CAP_CFG(port);
|
|
padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_TRIGGERS);
|
|
|
|
/* program electrical parameters read from XUSB PADCTL */
|
|
value = padctl_pmc_readl(priv, PMC_UTMIP_TERM_PAD_CFG);
|
|
value &= ~(TCTRL_VAL(~0) | PCTRL_VAL(~0));
|
|
value |= (TCTRL_VAL(tctrl) | PCTRL_VAL(pctrl));
|
|
padctl_pmc_writel(priv, value, PMC_UTMIP_TERM_PAD_CFG);
|
|
|
|
value = padctl_pmc_readl(priv, PMC_UTMIP_PAD_CFGX(port));
|
|
value &= ~RPD_CTRL_PX(~0);
|
|
value |= RPD_CTRL_PX(rpd_ctrl);
|
|
padctl_pmc_writel(priv, value, PMC_UTMIP_PAD_CFGX(port));
|
|
|
|
/*
|
|
* Set up the pull-ups and pull-downs of the signals during the four
|
|
* stages of sleepwalk. If a device is connected, program sleepwalk
|
|
* logic to maintain a J and keep driving K upon seeing remote wake.
|
|
*/
|
|
value = padctl_pmc_readl(priv, PMC_UTMIP_SLEEPWALK_PX(port));
|
|
value = UTMIP_USBOP_RPD_A | UTMIP_USBOP_RPD_B | UTMIP_USBOP_RPD_C | UTMIP_USBOP_RPD_D;
|
|
value |= UTMIP_USBON_RPD_A | UTMIP_USBON_RPD_B | UTMIP_USBON_RPD_C | UTMIP_USBON_RPD_D;
|
|
|
|
switch (speed) {
|
|
case USB_SPEED_HIGH:
|
|
case USB_SPEED_FULL:
|
|
/* J state: D+/D- = high/low, K state: D+/D- = low/high */
|
|
value |= UTMIP_HIGHZ_A;
|
|
value |= UTMIP_AP_A;
|
|
value |= UTMIP_AN_B | UTMIP_AN_C | UTMIP_AN_D;
|
|
break;
|
|
|
|
case USB_SPEED_LOW:
|
|
/* J state: D+/D- = low/high, K state: D+/D- = high/low */
|
|
value |= UTMIP_HIGHZ_A;
|
|
value |= UTMIP_AN_A;
|
|
value |= UTMIP_AP_B | UTMIP_AP_C | UTMIP_AP_D;
|
|
break;
|
|
|
|
default:
|
|
value |= UTMIP_HIGHZ_A | UTMIP_HIGHZ_B | UTMIP_HIGHZ_C | UTMIP_HIGHZ_D;
|
|
break;
|
|
}
|
|
|
|
padctl_pmc_writel(priv, value, PMC_UTMIP_SLEEPWALK_PX(port));
|
|
|
|
/* power up the line state detectors of the pad */
|
|
value = padctl_pmc_readl(priv, PMC_USB_AO);
|
|
value &= ~(USBOP_VAL_PD(port) | USBON_VAL_PD(port));
|
|
padctl_pmc_writel(priv, value, PMC_USB_AO);
|
|
|
|
usleep_range(50, 100);
|
|
|
|
/* switch the electric control of the USB2.0 pad to PMC */
|
|
value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
|
|
value |= UTMIP_FSLS_USE_PMC(port) | UTMIP_PCTRL_USE_PMC(port) | UTMIP_TCTRL_USE_PMC(port);
|
|
padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
|
|
|
|
value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG1);
|
|
value |= UTMIP_RPD_CTRL_USE_PMC_PX(port) | UTMIP_RPU_SWITC_LOW_USE_PMC_PX(port);
|
|
padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG1);
|
|
|
|
/* set the wake signaling trigger events */
|
|
value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
|
|
value &= ~UTMIP_WAKE_VAL(port, ~0);
|
|
value |= UTMIP_WAKE_VAL_ANY(port);
|
|
padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
|
|
|
|
/* enable the wake detection */
|
|
value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
|
|
value |= UTMIP_MASTER_ENABLE(port);
|
|
padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
|
|
|
|
value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_LINE_WAKEUP);
|
|
value |= UTMIP_LINE_WAKEUP_EN(port);
|
|
padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_LINE_WAKEUP);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra210_pmc_utmi_disable_phy_sleepwalk(struct tegra_xusb_lane *lane)
|
|
{
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
struct tegra210_xusb_padctl *priv = to_tegra210_xusb_padctl(padctl);
|
|
unsigned int port = lane->index;
|
|
u32 value;
|
|
|
|
if (!priv->regmap)
|
|
return -EOPNOTSUPP;
|
|
|
|
/* disable the wake detection */
|
|
value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
|
|
value &= ~UTMIP_MASTER_ENABLE(port);
|
|
padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
|
|
|
|
value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_LINE_WAKEUP);
|
|
value &= ~UTMIP_LINE_WAKEUP_EN(port);
|
|
padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_LINE_WAKEUP);
|
|
|
|
/* switch the electric control of the USB2.0 pad to XUSB or USB2 */
|
|
value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
|
|
value &= ~(UTMIP_FSLS_USE_PMC(port) | UTMIP_PCTRL_USE_PMC(port) |
|
|
UTMIP_TCTRL_USE_PMC(port));
|
|
padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
|
|
|
|
value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG1);
|
|
value &= ~(UTMIP_RPD_CTRL_USE_PMC_PX(port) | UTMIP_RPU_SWITC_LOW_USE_PMC_PX(port));
|
|
padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG1);
|
|
|
|
/* disable wake event triggers of sleepwalk logic */
|
|
value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
|
|
value &= ~UTMIP_WAKE_VAL(port, ~0);
|
|
value |= UTMIP_WAKE_VAL_NONE(port);
|
|
padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
|
|
|
|
/* power down the line state detectors of the port */
|
|
value = padctl_pmc_readl(priv, PMC_USB_AO);
|
|
value |= (USBOP_VAL_PD(port) | USBON_VAL_PD(port));
|
|
padctl_pmc_writel(priv, value, PMC_USB_AO);
|
|
|
|
/* clear alarm of the sleepwalk logic */
|
|
value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_TRIGGERS);
|
|
value |= UTMIP_CLR_WAKE_ALARM(port);
|
|
padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_TRIGGERS);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra210_pmc_hsic_enable_phy_sleepwalk(struct tegra_xusb_lane *lane,
|
|
enum usb_device_speed speed)
|
|
{
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
struct tegra210_xusb_padctl *priv = to_tegra210_xusb_padctl(padctl);
|
|
u32 value;
|
|
|
|
if (!priv->regmap)
|
|
return -EOPNOTSUPP;
|
|
|
|
/* ensure sleepwalk logic is disabled */
|
|
value = padctl_pmc_readl(priv, PMC_UHSIC_SLEEP_CFG);
|
|
value &= ~UHSIC_MASTER_ENABLE;
|
|
padctl_pmc_writel(priv, value, PMC_UHSIC_SLEEP_CFG);
|
|
|
|
/* ensure sleepwalk logics are in low power mode */
|
|
value = padctl_pmc_readl(priv, PMC_UTMIP_MASTER_CONFIG);
|
|
value |= UHSIC_PWR;
|
|
padctl_pmc_writel(priv, value, PMC_UTMIP_MASTER_CONFIG);
|
|
|
|
/* set debounce time */
|
|
value = padctl_pmc_readl(priv, PMC_USB_DEBOUNCE_DEL);
|
|
value &= ~UHSIC_LINE_DEB_CNT(~0);
|
|
value |= UHSIC_LINE_DEB_CNT(0x1);
|
|
padctl_pmc_writel(priv, value, PMC_USB_DEBOUNCE_DEL);
|
|
|
|
/* ensure fake events of sleepwalk logic are desiabled */
|
|
value = padctl_pmc_readl(priv, PMC_UHSIC_FAKE);
|
|
value &= ~(UHSIC_FAKE_STROBE_VAL | UHSIC_FAKE_DATA_VAL |
|
|
UHSIC_FAKE_STROBE_EN | UHSIC_FAKE_DATA_EN);
|
|
padctl_pmc_writel(priv, value, PMC_UHSIC_FAKE);
|
|
|
|
/* ensure wake events of sleepwalk logic are not latched */
|
|
value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_LINE_WAKEUP);
|
|
value &= ~UHSIC_LINE_WAKEUP_EN;
|
|
padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_LINE_WAKEUP);
|
|
|
|
/* disable wake event triggers of sleepwalk logic */
|
|
value = padctl_pmc_readl(priv, PMC_UHSIC_SLEEP_CFG);
|
|
value &= ~UHSIC_WAKE_VAL(~0);
|
|
value |= UHSIC_WAKE_VAL_NONE;
|
|
padctl_pmc_writel(priv, value, PMC_UHSIC_SLEEP_CFG);
|
|
|
|
/* power down the line state detectors of the port */
|
|
value = padctl_pmc_readl(priv, PMC_USB_AO);
|
|
value |= STROBE_VAL_PD | DATA0_VAL_PD | DATA1_VAL_PD;
|
|
padctl_pmc_writel(priv, value, PMC_USB_AO);
|
|
|
|
/* save state, HSIC always comes up as HS */
|
|
value = padctl_pmc_readl(priv, PMC_UHSIC_SAVED_STATE);
|
|
value &= ~UHSIC_MODE(~0);
|
|
value |= UHSIC_HS;
|
|
padctl_pmc_writel(priv, value, PMC_UHSIC_SAVED_STATE);
|
|
|
|
/* enable the trigger of the sleepwalk logic */
|
|
value = padctl_pmc_readl(priv, PMC_UHSIC_SLEEPWALK_CFG);
|
|
value |= UHSIC_WAKE_WALK_EN | UHSIC_LINEVAL_WALK_EN;
|
|
padctl_pmc_writel(priv, value, PMC_UHSIC_SLEEPWALK_CFG);
|
|
|
|
/*
|
|
* Reset the walk pointer and clear the alarm of the sleepwalk logic,
|
|
* as well as capture the configuration of the USB2.0 port.
|
|
*/
|
|
value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_TRIGGERS);
|
|
value |= UHSIC_CLR_WALK_PTR | UHSIC_CLR_WAKE_ALARM;
|
|
padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_TRIGGERS);
|
|
|
|
/*
|
|
* Set up the pull-ups and pull-downs of the signals during the four
|
|
* stages of sleepwalk. Maintain a HSIC IDLE and keep driving HSIC
|
|
* RESUME upon remote wake.
|
|
*/
|
|
value = padctl_pmc_readl(priv, PMC_UHSIC_SLEEPWALK_P0);
|
|
value = UHSIC_DATA0_RPD_A | UHSIC_DATA0_RPU_B | UHSIC_DATA0_RPU_C | UHSIC_DATA0_RPU_D |
|
|
UHSIC_STROBE_RPU_A | UHSIC_STROBE_RPD_B | UHSIC_STROBE_RPD_C | UHSIC_STROBE_RPD_D;
|
|
padctl_pmc_writel(priv, value, PMC_UHSIC_SLEEPWALK_P0);
|
|
|
|
/* power up the line state detectors of the port */
|
|
value = padctl_pmc_readl(priv, PMC_USB_AO);
|
|
value &= ~(STROBE_VAL_PD | DATA0_VAL_PD | DATA1_VAL_PD);
|
|
padctl_pmc_writel(priv, value, PMC_USB_AO);
|
|
|
|
usleep_range(50, 100);
|
|
|
|
/* set the wake signaling trigger events */
|
|
value = padctl_pmc_readl(priv, PMC_UHSIC_SLEEP_CFG);
|
|
value &= ~UHSIC_WAKE_VAL(~0);
|
|
value |= UHSIC_WAKE_VAL_SD10;
|
|
padctl_pmc_writel(priv, value, PMC_UHSIC_SLEEP_CFG);
|
|
|
|
/* enable the wake detection */
|
|
value = padctl_pmc_readl(priv, PMC_UHSIC_SLEEP_CFG);
|
|
value |= UHSIC_MASTER_ENABLE;
|
|
padctl_pmc_writel(priv, value, PMC_UHSIC_SLEEP_CFG);
|
|
|
|
value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_LINE_WAKEUP);
|
|
value |= UHSIC_LINE_WAKEUP_EN;
|
|
padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_LINE_WAKEUP);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra210_pmc_hsic_disable_phy_sleepwalk(struct tegra_xusb_lane *lane)
|
|
{
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
struct tegra210_xusb_padctl *priv = to_tegra210_xusb_padctl(padctl);
|
|
u32 value;
|
|
|
|
if (!priv->regmap)
|
|
return -EOPNOTSUPP;
|
|
|
|
/* disable the wake detection */
|
|
value = padctl_pmc_readl(priv, PMC_UHSIC_SLEEP_CFG);
|
|
value &= ~UHSIC_MASTER_ENABLE;
|
|
padctl_pmc_writel(priv, value, PMC_UHSIC_SLEEP_CFG);
|
|
|
|
value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_LINE_WAKEUP);
|
|
value &= ~UHSIC_LINE_WAKEUP_EN;
|
|
padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_LINE_WAKEUP);
|
|
|
|
/* disable wake event triggers of sleepwalk logic */
|
|
value = padctl_pmc_readl(priv, PMC_UHSIC_SLEEP_CFG);
|
|
value &= ~UHSIC_WAKE_VAL(~0);
|
|
value |= UHSIC_WAKE_VAL_NONE;
|
|
padctl_pmc_writel(priv, value, PMC_UHSIC_SLEEP_CFG);
|
|
|
|
/* power down the line state detectors of the port */
|
|
value = padctl_pmc_readl(priv, PMC_USB_AO);
|
|
value |= STROBE_VAL_PD | DATA0_VAL_PD | DATA1_VAL_PD;
|
|
padctl_pmc_writel(priv, value, PMC_USB_AO);
|
|
|
|
/* clear alarm of the sleepwalk logic */
|
|
value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_TRIGGERS);
|
|
value |= UHSIC_CLR_WAKE_ALARM;
|
|
padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_TRIGGERS);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra210_usb3_set_lfps_detect(struct tegra_xusb_padctl *padctl,
|
|
unsigned int index, bool enable)
|
|
{
|
|
struct tegra_xusb_port *port;
|
|
struct tegra_xusb_lane *lane;
|
|
u32 value, offset;
|
|
|
|
port = tegra_xusb_find_port(padctl, "usb3", index);
|
|
if (!port)
|
|
return -ENODEV;
|
|
|
|
lane = port->lane;
|
|
|
|
if (lane->pad == padctl->pcie)
|
|
offset = XUSB_PADCTL_UPHY_MISC_PAD_PX_CTL1(lane->index);
|
|
else
|
|
offset = XUSB_PADCTL_UPHY_MISC_PAD_S0_CTL1;
|
|
|
|
value = padctl_readl(padctl, offset);
|
|
|
|
value &= ~((XUSB_PADCTL_UPHY_MISC_PAD_CTL1_AUX_RX_IDLE_MODE_MASK <<
|
|
XUSB_PADCTL_UPHY_MISC_PAD_CTL1_AUX_RX_IDLE_MODE_SHIFT) |
|
|
XUSB_PADCTL_UPHY_MISC_PAD_CTL1_AUX_RX_TERM_EN |
|
|
XUSB_PADCTL_UPHY_MISC_PAD_CTL1_AUX_RX_MODE_OVRD);
|
|
|
|
if (!enable) {
|
|
value |= (XUSB_PADCTL_UPHY_MISC_PAD_CTL1_AUX_RX_IDLE_MODE_VAL <<
|
|
XUSB_PADCTL_UPHY_MISC_PAD_CTL1_AUX_RX_IDLE_MODE_SHIFT) |
|
|
XUSB_PADCTL_UPHY_MISC_PAD_CTL1_AUX_RX_TERM_EN |
|
|
XUSB_PADCTL_UPHY_MISC_PAD_CTL1_AUX_RX_MODE_OVRD;
|
|
}
|
|
|
|
padctl_writel(padctl, value, offset);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define TEGRA210_LANE(_name, _offset, _shift, _mask, _type) \
|
|
{ \
|
|
.name = _name, \
|
|
.offset = _offset, \
|
|
.shift = _shift, \
|
|
.mask = _mask, \
|
|
.num_funcs = ARRAY_SIZE(tegra210_##_type##_functions), \
|
|
.funcs = tegra210_##_type##_functions, \
|
|
}
|
|
|
|
static const char *tegra210_usb2_functions[] = {
|
|
"snps",
|
|
"xusb",
|
|
"uart"
|
|
};
|
|
|
|
static const struct tegra_xusb_lane_soc tegra210_usb2_lanes[] = {
|
|
TEGRA210_LANE("usb2-0", 0x004, 0, 0x3, usb2),
|
|
TEGRA210_LANE("usb2-1", 0x004, 2, 0x3, usb2),
|
|
TEGRA210_LANE("usb2-2", 0x004, 4, 0x3, usb2),
|
|
TEGRA210_LANE("usb2-3", 0x004, 6, 0x3, usb2),
|
|
};
|
|
|
|
static struct tegra_xusb_lane *
|
|
tegra210_usb2_lane_probe(struct tegra_xusb_pad *pad, struct device_node *np,
|
|
unsigned int index)
|
|
{
|
|
struct tegra_xusb_usb2_lane *usb2;
|
|
int err;
|
|
|
|
usb2 = kzalloc(sizeof(*usb2), GFP_KERNEL);
|
|
if (!usb2)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
INIT_LIST_HEAD(&usb2->base.list);
|
|
usb2->base.soc = &pad->soc->lanes[index];
|
|
usb2->base.index = index;
|
|
usb2->base.pad = pad;
|
|
usb2->base.np = np;
|
|
|
|
err = tegra_xusb_lane_parse_dt(&usb2->base, np);
|
|
if (err < 0) {
|
|
kfree(usb2);
|
|
return ERR_PTR(err);
|
|
}
|
|
|
|
return &usb2->base;
|
|
}
|
|
|
|
static void tegra210_usb2_lane_remove(struct tegra_xusb_lane *lane)
|
|
{
|
|
struct tegra_xusb_usb2_lane *usb2 = to_usb2_lane(lane);
|
|
|
|
kfree(usb2);
|
|
}
|
|
|
|
static const struct tegra_xusb_lane_ops tegra210_usb2_lane_ops = {
|
|
.probe = tegra210_usb2_lane_probe,
|
|
.remove = tegra210_usb2_lane_remove,
|
|
.enable_phy_sleepwalk = tegra210_pmc_utmi_enable_phy_sleepwalk,
|
|
.disable_phy_sleepwalk = tegra210_pmc_utmi_disable_phy_sleepwalk,
|
|
.enable_phy_wake = tegra210_utmi_enable_phy_wake,
|
|
.disable_phy_wake = tegra210_utmi_disable_phy_wake,
|
|
.remote_wake_detected = tegra210_utmi_phy_remote_wake_detected,
|
|
};
|
|
|
|
static int tegra210_usb2_phy_init(struct phy *phy)
|
|
{
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
unsigned int index = lane->index;
|
|
struct tegra_xusb_usb2_port *port;
|
|
int err;
|
|
u32 value;
|
|
|
|
port = tegra_xusb_find_usb2_port(padctl, index);
|
|
if (!port) {
|
|
dev_err(&phy->dev, "no port found for USB2 lane %u\n", index);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (port->supply && port->mode == USB_DR_MODE_HOST) {
|
|
err = regulator_enable(port->supply);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
mutex_lock(&padctl->lock);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB2_PAD_MUX);
|
|
value &= ~(XUSB_PADCTL_USB2_PAD_MUX_USB2_BIAS_PAD_MASK <<
|
|
XUSB_PADCTL_USB2_PAD_MUX_USB2_BIAS_PAD_SHIFT);
|
|
value |= XUSB_PADCTL_USB2_PAD_MUX_USB2_BIAS_PAD_XUSB <<
|
|
XUSB_PADCTL_USB2_PAD_MUX_USB2_BIAS_PAD_SHIFT;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB2_PAD_MUX);
|
|
|
|
mutex_unlock(&padctl->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra210_usb2_phy_exit(struct phy *phy)
|
|
{
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
struct tegra_xusb_usb2_port *port;
|
|
int err;
|
|
|
|
port = tegra_xusb_find_usb2_port(padctl, lane->index);
|
|
if (!port) {
|
|
dev_err(&phy->dev, "no port found for USB2 lane %u\n", lane->index);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (port->supply && port->mode == USB_DR_MODE_HOST) {
|
|
err = regulator_disable(port->supply);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra210_xusb_padctl_vbus_override(struct tegra_xusb_padctl *padctl,
|
|
bool status)
|
|
{
|
|
u32 value;
|
|
|
|
dev_dbg(padctl->dev, "%s vbus override\n", status ? "set" : "clear");
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB2_VBUS_ID);
|
|
|
|
if (status) {
|
|
value |= XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_VBUS_ON;
|
|
value &= ~(XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_MASK <<
|
|
XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_SHIFT);
|
|
value |= XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_FLOATING <<
|
|
XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_SHIFT;
|
|
} else {
|
|
value &= ~XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_VBUS_ON;
|
|
}
|
|
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB2_VBUS_ID);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra210_xusb_padctl_id_override(struct tegra_xusb_padctl *padctl,
|
|
bool status)
|
|
{
|
|
u32 value;
|
|
|
|
dev_dbg(padctl->dev, "%s id override\n", status ? "set" : "clear");
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB2_VBUS_ID);
|
|
|
|
if (status) {
|
|
if (value & XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_VBUS_ON) {
|
|
value &= ~XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_VBUS_ON;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB2_VBUS_ID);
|
|
usleep_range(1000, 2000);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB2_VBUS_ID);
|
|
}
|
|
|
|
value &= ~(XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_MASK <<
|
|
XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_SHIFT);
|
|
value |= XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_GROUNDED <<
|
|
XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_SHIFT;
|
|
} else {
|
|
value &= ~(XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_MASK <<
|
|
XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_SHIFT);
|
|
value |= XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_FLOATING <<
|
|
XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_SHIFT;
|
|
}
|
|
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB2_VBUS_ID);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra210_usb2_phy_set_mode(struct phy *phy, enum phy_mode mode,
|
|
int submode)
|
|
{
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
struct tegra_xusb_usb2_port *port = tegra_xusb_find_usb2_port(padctl,
|
|
lane->index);
|
|
int err = 0;
|
|
|
|
mutex_lock(&padctl->lock);
|
|
|
|
dev_dbg(&port->base.dev, "%s: mode %d", __func__, mode);
|
|
|
|
if (mode == PHY_MODE_USB_OTG) {
|
|
if (submode == USB_ROLE_HOST) {
|
|
tegra210_xusb_padctl_id_override(padctl, true);
|
|
|
|
err = regulator_enable(port->supply);
|
|
} else if (submode == USB_ROLE_DEVICE) {
|
|
tegra210_xusb_padctl_vbus_override(padctl, true);
|
|
} else if (submode == USB_ROLE_NONE) {
|
|
/*
|
|
* When port is peripheral only or role transitions to
|
|
* USB_ROLE_NONE from USB_ROLE_DEVICE, regulator is not
|
|
* be enabled.
|
|
*/
|
|
if (regulator_is_enabled(port->supply))
|
|
regulator_disable(port->supply);
|
|
|
|
tegra210_xusb_padctl_id_override(padctl, false);
|
|
tegra210_xusb_padctl_vbus_override(padctl, false);
|
|
}
|
|
}
|
|
|
|
mutex_unlock(&padctl->lock);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int tegra210_usb2_phy_power_on(struct phy *phy)
|
|
{
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
struct tegra_xusb_usb2_lane *usb2 = to_usb2_lane(lane);
|
|
struct tegra_xusb_usb2_pad *pad = to_usb2_pad(lane->pad);
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
struct tegra210_xusb_padctl *priv;
|
|
struct tegra_xusb_usb2_port *port;
|
|
unsigned int index = lane->index;
|
|
u32 value;
|
|
int err;
|
|
|
|
port = tegra_xusb_find_usb2_port(padctl, index);
|
|
if (!port) {
|
|
dev_err(&phy->dev, "no port found for USB2 lane %u\n", index);
|
|
return -ENODEV;
|
|
}
|
|
|
|
priv = to_tegra210_xusb_padctl(padctl);
|
|
|
|
mutex_lock(&padctl->lock);
|
|
|
|
if (port->usb3_port_fake != -1) {
|
|
value = padctl_readl(padctl, XUSB_PADCTL_SS_PORT_MAP);
|
|
value &= ~XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP_MASK(
|
|
port->usb3_port_fake);
|
|
value |= XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP(
|
|
port->usb3_port_fake, index);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_SS_PORT_MAP);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
value &= ~XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_VCORE_DOWN(
|
|
port->usb3_port_fake);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
|
|
usleep_range(100, 200);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
value &= ~XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN_EARLY(
|
|
port->usb3_port_fake);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
|
|
usleep_range(100, 200);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
value &= ~XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN(
|
|
port->usb3_port_fake);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
}
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
|
|
value &= ~((XUSB_PADCTL_USB2_BIAS_PAD_CTL0_HS_SQUELCH_LEVEL_MASK <<
|
|
XUSB_PADCTL_USB2_BIAS_PAD_CTL0_HS_SQUELCH_LEVEL_SHIFT) |
|
|
(XUSB_PADCTL_USB2_BIAS_PAD_CTL0_HS_DISCON_LEVEL_MASK <<
|
|
XUSB_PADCTL_USB2_BIAS_PAD_CTL0_HS_DISCON_LEVEL_SHIFT));
|
|
value |= (XUSB_PADCTL_USB2_BIAS_PAD_CTL0_HS_DISCON_LEVEL_VAL <<
|
|
XUSB_PADCTL_USB2_BIAS_PAD_CTL0_HS_DISCON_LEVEL_SHIFT);
|
|
|
|
if (tegra_sku_info.revision < TEGRA_REVISION_A02)
|
|
value |=
|
|
(XUSB_PADCTL_USB2_BIAS_PAD_CTL0_HS_SQUELCH_LEVEL_VAL <<
|
|
XUSB_PADCTL_USB2_BIAS_PAD_CTL0_HS_SQUELCH_LEVEL_SHIFT);
|
|
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB2_PORT_CAP);
|
|
value &= ~XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_MASK(index);
|
|
if (port->mode == USB_DR_MODE_UNKNOWN)
|
|
value |= XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_DISABLED(index);
|
|
else if (port->mode == USB_DR_MODE_PERIPHERAL)
|
|
value |= XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_DEVICE(index);
|
|
else if (port->mode == USB_DR_MODE_HOST)
|
|
value |= XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_HOST(index);
|
|
else if (port->mode == USB_DR_MODE_OTG)
|
|
value |= XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_OTG(index);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB2_PORT_CAP);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
|
|
value &= ~((XUSB_PADCTL_USB2_OTG_PAD_CTL0_HS_CURR_LEVEL_MASK <<
|
|
XUSB_PADCTL_USB2_OTG_PAD_CTL0_HS_CURR_LEVEL_SHIFT) |
|
|
XUSB_PADCTL_USB2_OTG_PAD_CTL0_PD |
|
|
XUSB_PADCTL_USB2_OTG_PAD_CTL0_PD2 |
|
|
XUSB_PADCTL_USB2_OTG_PAD_CTL0_PD_ZI);
|
|
value |= (priv->fuse.hs_curr_level[index] +
|
|
usb2->hs_curr_level_offset) <<
|
|
XUSB_PADCTL_USB2_OTG_PAD_CTL0_HS_CURR_LEVEL_SHIFT;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
|
|
value &= ~((XUSB_PADCTL_USB2_OTG_PAD_CTL1_TERM_RANGE_ADJ_MASK <<
|
|
XUSB_PADCTL_USB2_OTG_PAD_CTL1_TERM_RANGE_ADJ_SHIFT) |
|
|
(XUSB_PADCTL_USB2_OTG_PAD_CTL1_RPD_CTRL_MASK <<
|
|
XUSB_PADCTL_USB2_OTG_PAD_CTL1_RPD_CTRL_SHIFT) |
|
|
XUSB_PADCTL_USB2_OTG_PAD_CTL1_PD_DR |
|
|
XUSB_PADCTL_USB2_OTG_PAD_CTL1_PD_CHRP_OVRD |
|
|
XUSB_PADCTL_USB2_OTG_PAD_CTL1_PD_DISC_OVRD);
|
|
value |= (priv->fuse.hs_term_range_adj <<
|
|
XUSB_PADCTL_USB2_OTG_PAD_CTL1_TERM_RANGE_ADJ_SHIFT) |
|
|
(priv->fuse.rpd_ctrl <<
|
|
XUSB_PADCTL_USB2_OTG_PAD_CTL1_RPD_CTRL_SHIFT);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
|
|
|
|
value = padctl_readl(padctl,
|
|
XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
|
|
value &= ~(XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_MASK <<
|
|
XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_SHIFT);
|
|
if (port->mode == USB_DR_MODE_HOST)
|
|
value |= XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18;
|
|
else
|
|
value |=
|
|
XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_VAL <<
|
|
XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_SHIFT;
|
|
padctl_writel(padctl, value,
|
|
XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
|
|
|
|
if (pad->enable > 0) {
|
|
pad->enable++;
|
|
mutex_unlock(&padctl->lock);
|
|
return 0;
|
|
}
|
|
|
|
err = clk_prepare_enable(pad->clk);
|
|
if (err)
|
|
goto out;
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
|
|
value &= ~((XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_MASK <<
|
|
XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_SHIFT) |
|
|
(XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_DONE_RESET_TIMER_MASK <<
|
|
XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_DONE_RESET_TIMER_SHIFT));
|
|
value |= (XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_VAL <<
|
|
XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_SHIFT) |
|
|
(XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_DONE_RESET_TIMER_VAL <<
|
|
XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_DONE_RESET_TIMER_SHIFT);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
|
|
value &= ~XUSB_PADCTL_USB2_BIAS_PAD_CTL0_PD;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
|
|
|
|
udelay(1);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
|
|
value &= ~XUSB_PADCTL_USB2_BIAS_PAD_CTL1_PD_TRK;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
|
|
|
|
udelay(50);
|
|
|
|
clk_disable_unprepare(pad->clk);
|
|
|
|
pad->enable++;
|
|
mutex_unlock(&padctl->lock);
|
|
|
|
return 0;
|
|
|
|
out:
|
|
mutex_unlock(&padctl->lock);
|
|
return err;
|
|
}
|
|
|
|
static int tegra210_usb2_phy_power_off(struct phy *phy)
|
|
{
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
struct tegra_xusb_usb2_pad *pad = to_usb2_pad(lane->pad);
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
struct tegra_xusb_usb2_port *port;
|
|
u32 value;
|
|
|
|
port = tegra_xusb_find_usb2_port(padctl, lane->index);
|
|
if (!port) {
|
|
dev_err(&phy->dev, "no port found for USB2 lane %u\n",
|
|
lane->index);
|
|
return -ENODEV;
|
|
}
|
|
|
|
mutex_lock(&padctl->lock);
|
|
|
|
if (port->usb3_port_fake != -1) {
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
value |= XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN_EARLY(
|
|
port->usb3_port_fake);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
|
|
usleep_range(100, 200);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
value |= XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN(
|
|
port->usb3_port_fake);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
|
|
usleep_range(250, 350);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
value |= XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_VCORE_DOWN(
|
|
port->usb3_port_fake);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_SS_PORT_MAP);
|
|
value |= XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP(port->usb3_port_fake,
|
|
XUSB_PADCTL_SS_PORT_MAP_PORT_DISABLED);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_SS_PORT_MAP);
|
|
}
|
|
|
|
if (WARN_ON(pad->enable == 0))
|
|
goto out;
|
|
|
|
if (--pad->enable > 0)
|
|
goto out;
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
|
|
value |= XUSB_PADCTL_USB2_BIAS_PAD_CTL0_PD;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
|
|
|
|
out:
|
|
mutex_unlock(&padctl->lock);
|
|
return 0;
|
|
}
|
|
|
|
static const struct phy_ops tegra210_usb2_phy_ops = {
|
|
.init = tegra210_usb2_phy_init,
|
|
.exit = tegra210_usb2_phy_exit,
|
|
.power_on = tegra210_usb2_phy_power_on,
|
|
.power_off = tegra210_usb2_phy_power_off,
|
|
.set_mode = tegra210_usb2_phy_set_mode,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static struct tegra_xusb_pad *
|
|
tegra210_usb2_pad_probe(struct tegra_xusb_padctl *padctl,
|
|
const struct tegra_xusb_pad_soc *soc,
|
|
struct device_node *np)
|
|
{
|
|
struct tegra_xusb_usb2_pad *usb2;
|
|
struct tegra_xusb_pad *pad;
|
|
int err;
|
|
|
|
usb2 = kzalloc(sizeof(*usb2), GFP_KERNEL);
|
|
if (!usb2)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
pad = &usb2->base;
|
|
pad->ops = &tegra210_usb2_lane_ops;
|
|
pad->soc = soc;
|
|
|
|
err = tegra_xusb_pad_init(pad, padctl, np);
|
|
if (err < 0) {
|
|
kfree(usb2);
|
|
goto out;
|
|
}
|
|
|
|
usb2->clk = devm_clk_get(&pad->dev, "trk");
|
|
if (IS_ERR(usb2->clk)) {
|
|
err = PTR_ERR(usb2->clk);
|
|
dev_err(&pad->dev, "failed to get trk clock: %d\n", err);
|
|
goto unregister;
|
|
}
|
|
|
|
err = tegra_xusb_pad_register(pad, &tegra210_usb2_phy_ops);
|
|
if (err < 0)
|
|
goto unregister;
|
|
|
|
dev_set_drvdata(&pad->dev, pad);
|
|
|
|
return pad;
|
|
|
|
unregister:
|
|
device_unregister(&pad->dev);
|
|
out:
|
|
return ERR_PTR(err);
|
|
}
|
|
|
|
static void tegra210_usb2_pad_remove(struct tegra_xusb_pad *pad)
|
|
{
|
|
struct tegra_xusb_usb2_pad *usb2 = to_usb2_pad(pad);
|
|
|
|
kfree(usb2);
|
|
}
|
|
|
|
static const struct tegra_xusb_pad_ops tegra210_usb2_ops = {
|
|
.probe = tegra210_usb2_pad_probe,
|
|
.remove = tegra210_usb2_pad_remove,
|
|
};
|
|
|
|
static const struct tegra_xusb_pad_soc tegra210_usb2_pad = {
|
|
.name = "usb2",
|
|
.num_lanes = ARRAY_SIZE(tegra210_usb2_lanes),
|
|
.lanes = tegra210_usb2_lanes,
|
|
.ops = &tegra210_usb2_ops,
|
|
};
|
|
|
|
static const char *tegra210_hsic_functions[] = {
|
|
"snps",
|
|
"xusb",
|
|
};
|
|
|
|
static const struct tegra_xusb_lane_soc tegra210_hsic_lanes[] = {
|
|
TEGRA210_LANE("hsic-0", 0x004, 14, 0x1, hsic),
|
|
};
|
|
|
|
static struct tegra_xusb_lane *
|
|
tegra210_hsic_lane_probe(struct tegra_xusb_pad *pad, struct device_node *np,
|
|
unsigned int index)
|
|
{
|
|
struct tegra_xusb_hsic_lane *hsic;
|
|
int err;
|
|
|
|
hsic = kzalloc(sizeof(*hsic), GFP_KERNEL);
|
|
if (!hsic)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
INIT_LIST_HEAD(&hsic->base.list);
|
|
hsic->base.soc = &pad->soc->lanes[index];
|
|
hsic->base.index = index;
|
|
hsic->base.pad = pad;
|
|
hsic->base.np = np;
|
|
|
|
err = tegra_xusb_lane_parse_dt(&hsic->base, np);
|
|
if (err < 0) {
|
|
kfree(hsic);
|
|
return ERR_PTR(err);
|
|
}
|
|
|
|
return &hsic->base;
|
|
}
|
|
|
|
static void tegra210_hsic_lane_remove(struct tegra_xusb_lane *lane)
|
|
{
|
|
struct tegra_xusb_hsic_lane *hsic = to_hsic_lane(lane);
|
|
|
|
kfree(hsic);
|
|
}
|
|
|
|
static const struct tegra_xusb_lane_ops tegra210_hsic_lane_ops = {
|
|
.probe = tegra210_hsic_lane_probe,
|
|
.remove = tegra210_hsic_lane_remove,
|
|
.enable_phy_sleepwalk = tegra210_pmc_hsic_enable_phy_sleepwalk,
|
|
.disable_phy_sleepwalk = tegra210_pmc_hsic_disable_phy_sleepwalk,
|
|
.enable_phy_wake = tegra210_hsic_enable_phy_wake,
|
|
.disable_phy_wake = tegra210_hsic_disable_phy_wake,
|
|
.remote_wake_detected = tegra210_hsic_phy_remote_wake_detected,
|
|
};
|
|
|
|
static int tegra210_hsic_phy_init(struct phy *phy)
|
|
{
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
u32 value;
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB2_PAD_MUX);
|
|
value &= ~(XUSB_PADCTL_USB2_PAD_MUX_HSIC_PAD_TRK_MASK <<
|
|
XUSB_PADCTL_USB2_PAD_MUX_HSIC_PAD_TRK_SHIFT);
|
|
value |= XUSB_PADCTL_USB2_PAD_MUX_HSIC_PAD_TRK_XUSB <<
|
|
XUSB_PADCTL_USB2_PAD_MUX_HSIC_PAD_TRK_SHIFT;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB2_PAD_MUX);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra210_hsic_phy_exit(struct phy *phy)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int tegra210_hsic_phy_power_on(struct phy *phy)
|
|
{
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
struct tegra_xusb_hsic_lane *hsic = to_hsic_lane(lane);
|
|
struct tegra_xusb_hsic_pad *pad = to_hsic_pad(lane->pad);
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
unsigned int index = lane->index;
|
|
u32 value;
|
|
int err;
|
|
|
|
err = regulator_enable(pad->supply);
|
|
if (err)
|
|
return err;
|
|
|
|
padctl_writel(padctl, hsic->strobe_trim,
|
|
XUSB_PADCTL_HSIC_STRB_TRIM_CONTROL);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_HSIC_PADX_CTL1(index));
|
|
value &= ~(XUSB_PADCTL_HSIC_PAD_CTL1_TX_RTUNEP_MASK <<
|
|
XUSB_PADCTL_HSIC_PAD_CTL1_TX_RTUNEP_SHIFT);
|
|
value |= (hsic->tx_rtune_p <<
|
|
XUSB_PADCTL_HSIC_PAD_CTL1_TX_RTUNEP_SHIFT);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_HSIC_PADX_CTL1(index));
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_HSIC_PADX_CTL2(index));
|
|
value &= ~((XUSB_PADCTL_HSIC_PAD_CTL2_RX_STROBE_TRIM_MASK <<
|
|
XUSB_PADCTL_HSIC_PAD_CTL2_RX_STROBE_TRIM_SHIFT) |
|
|
(XUSB_PADCTL_HSIC_PAD_CTL2_RX_DATA_TRIM_MASK <<
|
|
XUSB_PADCTL_HSIC_PAD_CTL2_RX_DATA_TRIM_SHIFT));
|
|
value |= (hsic->rx_strobe_trim <<
|
|
XUSB_PADCTL_HSIC_PAD_CTL2_RX_STROBE_TRIM_SHIFT) |
|
|
(hsic->rx_data_trim <<
|
|
XUSB_PADCTL_HSIC_PAD_CTL2_RX_DATA_TRIM_SHIFT);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_HSIC_PADX_CTL2(index));
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_HSIC_PADX_CTL0(index));
|
|
value &= ~(XUSB_PADCTL_HSIC_PAD_CTL0_RPU_DATA0 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_RPU_DATA1 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_RPU_STROBE |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_PD_RX_DATA0 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_PD_RX_DATA1 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_PD_RX_STROBE |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_PD_ZI_DATA0 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_PD_ZI_DATA1 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_PD_ZI_STROBE |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_PD_TX_DATA0 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_PD_TX_DATA1 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_PD_TX_STROBE);
|
|
value |= XUSB_PADCTL_HSIC_PAD_CTL0_RPD_DATA0 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_RPD_DATA1 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_RPD_STROBE;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_HSIC_PADX_CTL0(index));
|
|
|
|
err = clk_prepare_enable(pad->clk);
|
|
if (err)
|
|
goto disable;
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_HSIC_PAD_TRK_CTL);
|
|
value &= ~((XUSB_PADCTL_HSIC_PAD_TRK_CTL_TRK_START_TIMER_MASK <<
|
|
XUSB_PADCTL_HSIC_PAD_TRK_CTL_TRK_START_TIMER_SHIFT) |
|
|
(XUSB_PADCTL_HSIC_PAD_TRK_CTL_TRK_DONE_RESET_TIMER_MASK <<
|
|
XUSB_PADCTL_HSIC_PAD_TRK_CTL_TRK_DONE_RESET_TIMER_SHIFT));
|
|
value |= (XUSB_PADCTL_HSIC_PAD_TRK_CTL_TRK_START_TIMER_VAL <<
|
|
XUSB_PADCTL_HSIC_PAD_TRK_CTL_TRK_START_TIMER_SHIFT) |
|
|
(XUSB_PADCTL_HSIC_PAD_TRK_CTL_TRK_DONE_RESET_TIMER_VAL <<
|
|
XUSB_PADCTL_HSIC_PAD_TRK_CTL_TRK_DONE_RESET_TIMER_SHIFT);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_HSIC_PAD_TRK_CTL);
|
|
|
|
udelay(1);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_HSIC_PAD_TRK_CTL);
|
|
value &= ~XUSB_PADCTL_HSIC_PAD_TRK_CTL_PD_TRK;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_HSIC_PAD_TRK_CTL);
|
|
|
|
udelay(50);
|
|
|
|
clk_disable_unprepare(pad->clk);
|
|
|
|
return 0;
|
|
|
|
disable:
|
|
regulator_disable(pad->supply);
|
|
return err;
|
|
}
|
|
|
|
static int tegra210_hsic_phy_power_off(struct phy *phy)
|
|
{
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
struct tegra_xusb_hsic_pad *pad = to_hsic_pad(lane->pad);
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
unsigned int index = lane->index;
|
|
u32 value;
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_HSIC_PADX_CTL0(index));
|
|
value |= XUSB_PADCTL_HSIC_PAD_CTL0_PD_RX_DATA0 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_PD_RX_DATA1 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_PD_RX_STROBE |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_PD_ZI_DATA0 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_PD_ZI_DATA1 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_PD_ZI_STROBE |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_PD_TX_DATA0 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_PD_TX_DATA1 |
|
|
XUSB_PADCTL_HSIC_PAD_CTL0_PD_TX_STROBE;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_HSIC_PADX_CTL1(index));
|
|
|
|
regulator_disable(pad->supply);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct phy_ops tegra210_hsic_phy_ops = {
|
|
.init = tegra210_hsic_phy_init,
|
|
.exit = tegra210_hsic_phy_exit,
|
|
.power_on = tegra210_hsic_phy_power_on,
|
|
.power_off = tegra210_hsic_phy_power_off,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static struct tegra_xusb_pad *
|
|
tegra210_hsic_pad_probe(struct tegra_xusb_padctl *padctl,
|
|
const struct tegra_xusb_pad_soc *soc,
|
|
struct device_node *np)
|
|
{
|
|
struct tegra_xusb_hsic_pad *hsic;
|
|
struct tegra_xusb_pad *pad;
|
|
int err;
|
|
|
|
hsic = kzalloc(sizeof(*hsic), GFP_KERNEL);
|
|
if (!hsic)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
pad = &hsic->base;
|
|
pad->ops = &tegra210_hsic_lane_ops;
|
|
pad->soc = soc;
|
|
|
|
err = tegra_xusb_pad_init(pad, padctl, np);
|
|
if (err < 0) {
|
|
kfree(hsic);
|
|
goto out;
|
|
}
|
|
|
|
hsic->clk = devm_clk_get(&pad->dev, "trk");
|
|
if (IS_ERR(hsic->clk)) {
|
|
err = PTR_ERR(hsic->clk);
|
|
dev_err(&pad->dev, "failed to get trk clock: %d\n", err);
|
|
goto unregister;
|
|
}
|
|
|
|
err = tegra_xusb_pad_register(pad, &tegra210_hsic_phy_ops);
|
|
if (err < 0)
|
|
goto unregister;
|
|
|
|
dev_set_drvdata(&pad->dev, pad);
|
|
|
|
return pad;
|
|
|
|
unregister:
|
|
device_unregister(&pad->dev);
|
|
out:
|
|
return ERR_PTR(err);
|
|
}
|
|
|
|
static void tegra210_hsic_pad_remove(struct tegra_xusb_pad *pad)
|
|
{
|
|
struct tegra_xusb_hsic_pad *hsic = to_hsic_pad(pad);
|
|
|
|
kfree(hsic);
|
|
}
|
|
|
|
static const struct tegra_xusb_pad_ops tegra210_hsic_ops = {
|
|
.probe = tegra210_hsic_pad_probe,
|
|
.remove = tegra210_hsic_pad_remove,
|
|
};
|
|
|
|
static const struct tegra_xusb_pad_soc tegra210_hsic_pad = {
|
|
.name = "hsic",
|
|
.num_lanes = ARRAY_SIZE(tegra210_hsic_lanes),
|
|
.lanes = tegra210_hsic_lanes,
|
|
.ops = &tegra210_hsic_ops,
|
|
};
|
|
|
|
static void tegra210_uphy_lane_iddq_enable(struct tegra_xusb_lane *lane)
|
|
{
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
u32 value;
|
|
|
|
value = padctl_readl(padctl, lane->soc->regs.misc_ctl2);
|
|
value |= XUSB_PADCTL_UPHY_MISC_PAD_CTL2_TX_IDDQ_OVRD;
|
|
value |= XUSB_PADCTL_UPHY_MISC_PAD_CTL2_RX_IDDQ_OVRD;
|
|
value |= XUSB_PADCTL_UPHY_MISC_PAD_CTL2_TX_PWR_OVRD;
|
|
value |= XUSB_PADCTL_UPHY_MISC_PAD_CTL2_RX_PWR_OVRD;
|
|
value |= XUSB_PADCTL_UPHY_MISC_PAD_CTL2_TX_IDDQ;
|
|
value &= ~XUSB_PADCTL_UPHY_MISC_PAD_CTL2_TX_SLEEP_MASK;
|
|
value |= XUSB_PADCTL_UPHY_MISC_PAD_CTL2_TX_SLEEP_VAL;
|
|
value |= XUSB_PADCTL_UPHY_MISC_PAD_CTL2_RX_IDDQ;
|
|
value &= ~XUSB_PADCTL_UPHY_MISC_PAD_CTL2_RX_SLEEP_MASK;
|
|
value |= XUSB_PADCTL_UPHY_MISC_PAD_CTL2_RX_SLEEP_VAL;
|
|
padctl_writel(padctl, value, lane->soc->regs.misc_ctl2);
|
|
}
|
|
|
|
static void tegra210_uphy_lane_iddq_disable(struct tegra_xusb_lane *lane)
|
|
{
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
u32 value;
|
|
|
|
value = padctl_readl(padctl, lane->soc->regs.misc_ctl2);
|
|
value &= ~XUSB_PADCTL_UPHY_MISC_PAD_CTL2_TX_IDDQ_OVRD;
|
|
value &= ~XUSB_PADCTL_UPHY_MISC_PAD_CTL2_RX_IDDQ_OVRD;
|
|
value &= ~XUSB_PADCTL_UPHY_MISC_PAD_CTL2_TX_PWR_OVRD;
|
|
value &= ~XUSB_PADCTL_UPHY_MISC_PAD_CTL2_RX_PWR_OVRD;
|
|
value |= XUSB_PADCTL_UPHY_MISC_PAD_CTL2_TX_IDDQ;
|
|
value &= ~XUSB_PADCTL_UPHY_MISC_PAD_CTL2_TX_SLEEP_MASK;
|
|
value |= XUSB_PADCTL_UPHY_MISC_PAD_CTL2_TX_SLEEP_VAL;
|
|
value |= XUSB_PADCTL_UPHY_MISC_PAD_CTL2_RX_IDDQ;
|
|
value &= ~XUSB_PADCTL_UPHY_MISC_PAD_CTL2_RX_SLEEP_MASK;
|
|
value |= XUSB_PADCTL_UPHY_MISC_PAD_CTL2_RX_SLEEP_VAL;
|
|
padctl_writel(padctl, value, lane->soc->regs.misc_ctl2);
|
|
}
|
|
|
|
#define TEGRA210_UPHY_LANE(_name, _offset, _shift, _mask, _type, _misc) \
|
|
{ \
|
|
.name = _name, \
|
|
.offset = _offset, \
|
|
.shift = _shift, \
|
|
.mask = _mask, \
|
|
.num_funcs = ARRAY_SIZE(tegra210_##_type##_functions), \
|
|
.funcs = tegra210_##_type##_functions, \
|
|
.regs.misc_ctl2 = _misc, \
|
|
}
|
|
|
|
static const char *tegra210_pcie_functions[] = {
|
|
"pcie-x1",
|
|
"usb3-ss",
|
|
"sata",
|
|
"pcie-x4",
|
|
};
|
|
|
|
static const struct tegra_xusb_lane_soc tegra210_pcie_lanes[] = {
|
|
TEGRA210_UPHY_LANE("pcie-0", 0x028, 12, 0x3, pcie, XUSB_PADCTL_UPHY_MISC_PAD_PX_CTL2(0)),
|
|
TEGRA210_UPHY_LANE("pcie-1", 0x028, 14, 0x3, pcie, XUSB_PADCTL_UPHY_MISC_PAD_PX_CTL2(1)),
|
|
TEGRA210_UPHY_LANE("pcie-2", 0x028, 16, 0x3, pcie, XUSB_PADCTL_UPHY_MISC_PAD_PX_CTL2(2)),
|
|
TEGRA210_UPHY_LANE("pcie-3", 0x028, 18, 0x3, pcie, XUSB_PADCTL_UPHY_MISC_PAD_PX_CTL2(3)),
|
|
TEGRA210_UPHY_LANE("pcie-4", 0x028, 20, 0x3, pcie, XUSB_PADCTL_UPHY_MISC_PAD_PX_CTL2(4)),
|
|
TEGRA210_UPHY_LANE("pcie-5", 0x028, 22, 0x3, pcie, XUSB_PADCTL_UPHY_MISC_PAD_PX_CTL2(5)),
|
|
TEGRA210_UPHY_LANE("pcie-6", 0x028, 24, 0x3, pcie, XUSB_PADCTL_UPHY_MISC_PAD_PX_CTL2(6)),
|
|
};
|
|
|
|
static struct tegra_xusb_usb3_port *
|
|
tegra210_lane_to_usb3_port(struct tegra_xusb_lane *lane)
|
|
{
|
|
int port;
|
|
|
|
if (!lane || !lane->pad || !lane->pad->padctl)
|
|
return NULL;
|
|
|
|
port = tegra210_usb3_lane_map(lane);
|
|
if (port < 0)
|
|
return NULL;
|
|
|
|
return tegra_xusb_find_usb3_port(lane->pad->padctl, port);
|
|
}
|
|
|
|
static int tegra210_usb3_phy_power_on(struct phy *phy)
|
|
{
|
|
struct device *dev = &phy->dev;
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
struct tegra_xusb_usb3_port *usb3 = tegra210_lane_to_usb3_port(lane);
|
|
unsigned int index;
|
|
u32 value;
|
|
|
|
if (!usb3) {
|
|
dev_err(dev, "no USB3 port found for lane %u\n", lane->index);
|
|
return -ENODEV;
|
|
}
|
|
|
|
index = usb3->base.index;
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_SS_PORT_MAP);
|
|
|
|
if (!usb3->internal)
|
|
value &= ~XUSB_PADCTL_SS_PORT_MAP_PORTX_INTERNAL(index);
|
|
else
|
|
value |= XUSB_PADCTL_SS_PORT_MAP_PORTX_INTERNAL(index);
|
|
|
|
value &= ~XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP_MASK(index);
|
|
value |= XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP(index, usb3->port);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_SS_PORT_MAP);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_USB3_PADX_ECTL1(index));
|
|
value &= ~(XUSB_PADCTL_UPHY_USB3_PAD_ECTL1_TX_TERM_CTRL_MASK <<
|
|
XUSB_PADCTL_UPHY_USB3_PAD_ECTL1_TX_TERM_CTRL_SHIFT);
|
|
value |= XUSB_PADCTL_UPHY_USB3_PAD_ECTL1_TX_TERM_CTRL_VAL <<
|
|
XUSB_PADCTL_UPHY_USB3_PAD_ECTL1_TX_TERM_CTRL_SHIFT;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_USB3_PADX_ECTL1(index));
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_USB3_PADX_ECTL2(index));
|
|
value &= ~(XUSB_PADCTL_UPHY_USB3_PAD_ECTL2_RX_CTLE_MASK <<
|
|
XUSB_PADCTL_UPHY_USB3_PAD_ECTL2_RX_CTLE_SHIFT);
|
|
value |= XUSB_PADCTL_UPHY_USB3_PAD_ECTL2_RX_CTLE_VAL <<
|
|
XUSB_PADCTL_UPHY_USB3_PAD_ECTL2_RX_CTLE_SHIFT;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_USB3_PADX_ECTL2(index));
|
|
|
|
padctl_writel(padctl, XUSB_PADCTL_UPHY_USB3_PAD_ECTL3_RX_DFE_VAL,
|
|
XUSB_PADCTL_UPHY_USB3_PADX_ECTL3(index));
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_UPHY_USB3_PADX_ECTL4(index));
|
|
value &= ~(XUSB_PADCTL_UPHY_USB3_PAD_ECTL4_RX_CDR_CTRL_MASK <<
|
|
XUSB_PADCTL_UPHY_USB3_PAD_ECTL4_RX_CDR_CTRL_SHIFT);
|
|
value |= XUSB_PADCTL_UPHY_USB3_PAD_ECTL4_RX_CDR_CTRL_VAL <<
|
|
XUSB_PADCTL_UPHY_USB3_PAD_ECTL4_RX_CDR_CTRL_SHIFT;
|
|
padctl_writel(padctl, value, XUSB_PADCTL_UPHY_USB3_PADX_ECTL4(index));
|
|
|
|
padctl_writel(padctl, XUSB_PADCTL_UPHY_USB3_PAD_ECTL6_RX_EQ_CTRL_H_VAL,
|
|
XUSB_PADCTL_UPHY_USB3_PADX_ECTL6(index));
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
value &= ~XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_VCORE_DOWN(index);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
|
|
usleep_range(100, 200);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
value &= ~XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN_EARLY(index);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
|
|
usleep_range(100, 200);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
value &= ~XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN(index);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra210_usb3_phy_power_off(struct phy *phy)
|
|
{
|
|
struct device *dev = &phy->dev;
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
struct tegra_xusb_usb3_port *usb3 = tegra210_lane_to_usb3_port(lane);
|
|
unsigned int index;
|
|
u32 value;
|
|
|
|
if (!usb3) {
|
|
dev_err(dev, "no USB3 port found for lane %u\n", lane->index);
|
|
return -ENODEV;
|
|
}
|
|
|
|
index = usb3->base.index;
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
value |= XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN_EARLY(index);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
|
|
usleep_range(100, 200);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
value |= XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN(index);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
|
|
usleep_range(250, 350);
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
value |= XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_VCORE_DOWN(index);
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
|
|
|
|
return 0;
|
|
}
|
|
static struct tegra_xusb_lane *
|
|
tegra210_pcie_lane_probe(struct tegra_xusb_pad *pad, struct device_node *np,
|
|
unsigned int index)
|
|
{
|
|
struct tegra_xusb_pcie_lane *pcie;
|
|
int err;
|
|
|
|
pcie = kzalloc(sizeof(*pcie), GFP_KERNEL);
|
|
if (!pcie)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
INIT_LIST_HEAD(&pcie->base.list);
|
|
pcie->base.soc = &pad->soc->lanes[index];
|
|
pcie->base.index = index;
|
|
pcie->base.pad = pad;
|
|
pcie->base.np = np;
|
|
|
|
err = tegra_xusb_lane_parse_dt(&pcie->base, np);
|
|
if (err < 0) {
|
|
kfree(pcie);
|
|
return ERR_PTR(err);
|
|
}
|
|
|
|
return &pcie->base;
|
|
}
|
|
|
|
static void tegra210_pcie_lane_remove(struct tegra_xusb_lane *lane)
|
|
{
|
|
struct tegra_xusb_pcie_lane *pcie = to_pcie_lane(lane);
|
|
|
|
kfree(pcie);
|
|
}
|
|
|
|
static const struct tegra_xusb_lane_ops tegra210_pcie_lane_ops = {
|
|
.probe = tegra210_pcie_lane_probe,
|
|
.remove = tegra210_pcie_lane_remove,
|
|
.iddq_enable = tegra210_uphy_lane_iddq_enable,
|
|
.iddq_disable = tegra210_uphy_lane_iddq_disable,
|
|
.enable_phy_sleepwalk = tegra210_usb3_enable_phy_sleepwalk,
|
|
.disable_phy_sleepwalk = tegra210_usb3_disable_phy_sleepwalk,
|
|
.enable_phy_wake = tegra210_usb3_enable_phy_wake,
|
|
.disable_phy_wake = tegra210_usb3_disable_phy_wake,
|
|
.remote_wake_detected = tegra210_usb3_phy_remote_wake_detected,
|
|
};
|
|
|
|
static int tegra210_pcie_phy_init(struct phy *phy)
|
|
{
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
|
|
mutex_lock(&padctl->lock);
|
|
|
|
tegra210_uphy_init(padctl);
|
|
|
|
mutex_unlock(&padctl->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra210_pcie_phy_power_on(struct phy *phy)
|
|
{
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
int err = 0;
|
|
|
|
mutex_lock(&padctl->lock);
|
|
|
|
if (tegra_xusb_lane_check(lane, "usb3-ss"))
|
|
err = tegra210_usb3_phy_power_on(phy);
|
|
|
|
mutex_unlock(&padctl->lock);
|
|
return err;
|
|
}
|
|
|
|
static int tegra210_pcie_phy_power_off(struct phy *phy)
|
|
{
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
int err = 0;
|
|
|
|
mutex_lock(&padctl->lock);
|
|
|
|
if (tegra_xusb_lane_check(lane, "usb3-ss"))
|
|
err = tegra210_usb3_phy_power_off(phy);
|
|
|
|
mutex_unlock(&padctl->lock);
|
|
return err;
|
|
}
|
|
|
|
static const struct phy_ops tegra210_pcie_phy_ops = {
|
|
.init = tegra210_pcie_phy_init,
|
|
.power_on = tegra210_pcie_phy_power_on,
|
|
.power_off = tegra210_pcie_phy_power_off,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static struct tegra_xusb_pad *
|
|
tegra210_pcie_pad_probe(struct tegra_xusb_padctl *padctl,
|
|
const struct tegra_xusb_pad_soc *soc,
|
|
struct device_node *np)
|
|
{
|
|
struct tegra_xusb_pcie_pad *pcie;
|
|
struct tegra_xusb_pad *pad;
|
|
int err;
|
|
|
|
pcie = kzalloc(sizeof(*pcie), GFP_KERNEL);
|
|
if (!pcie)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
pad = &pcie->base;
|
|
pad->ops = &tegra210_pcie_lane_ops;
|
|
pad->soc = soc;
|
|
|
|
err = tegra_xusb_pad_init(pad, padctl, np);
|
|
if (err < 0) {
|
|
kfree(pcie);
|
|
goto out;
|
|
}
|
|
|
|
pcie->pll = devm_clk_get(&pad->dev, "pll");
|
|
if (IS_ERR(pcie->pll)) {
|
|
err = PTR_ERR(pcie->pll);
|
|
dev_err(&pad->dev, "failed to get PLL: %d\n", err);
|
|
goto unregister;
|
|
}
|
|
|
|
pcie->rst = devm_reset_control_get(&pad->dev, "phy");
|
|
if (IS_ERR(pcie->rst)) {
|
|
err = PTR_ERR(pcie->rst);
|
|
dev_err(&pad->dev, "failed to get PCIe pad reset: %d\n", err);
|
|
goto unregister;
|
|
}
|
|
|
|
err = tegra_xusb_pad_register(pad, &tegra210_pcie_phy_ops);
|
|
if (err < 0)
|
|
goto unregister;
|
|
|
|
dev_set_drvdata(&pad->dev, pad);
|
|
|
|
return pad;
|
|
|
|
unregister:
|
|
device_unregister(&pad->dev);
|
|
out:
|
|
return ERR_PTR(err);
|
|
}
|
|
|
|
static void tegra210_pcie_pad_remove(struct tegra_xusb_pad *pad)
|
|
{
|
|
struct tegra_xusb_pcie_pad *pcie = to_pcie_pad(pad);
|
|
|
|
kfree(pcie);
|
|
}
|
|
|
|
static const struct tegra_xusb_pad_ops tegra210_pcie_ops = {
|
|
.probe = tegra210_pcie_pad_probe,
|
|
.remove = tegra210_pcie_pad_remove,
|
|
};
|
|
|
|
static const struct tegra_xusb_pad_soc tegra210_pcie_pad = {
|
|
.name = "pcie",
|
|
.num_lanes = ARRAY_SIZE(tegra210_pcie_lanes),
|
|
.lanes = tegra210_pcie_lanes,
|
|
.ops = &tegra210_pcie_ops,
|
|
};
|
|
|
|
static const struct tegra_xusb_lane_soc tegra210_sata_lanes[] = {
|
|
TEGRA210_UPHY_LANE("sata-0", 0x028, 30, 0x3, pcie, XUSB_PADCTL_UPHY_MISC_PAD_S0_CTL2),
|
|
};
|
|
|
|
static struct tegra_xusb_lane *
|
|
tegra210_sata_lane_probe(struct tegra_xusb_pad *pad, struct device_node *np,
|
|
unsigned int index)
|
|
{
|
|
struct tegra_xusb_sata_lane *sata;
|
|
int err;
|
|
|
|
sata = kzalloc(sizeof(*sata), GFP_KERNEL);
|
|
if (!sata)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
INIT_LIST_HEAD(&sata->base.list);
|
|
sata->base.soc = &pad->soc->lanes[index];
|
|
sata->base.index = index;
|
|
sata->base.pad = pad;
|
|
sata->base.np = np;
|
|
|
|
err = tegra_xusb_lane_parse_dt(&sata->base, np);
|
|
if (err < 0) {
|
|
kfree(sata);
|
|
return ERR_PTR(err);
|
|
}
|
|
|
|
return &sata->base;
|
|
}
|
|
|
|
static void tegra210_sata_lane_remove(struct tegra_xusb_lane *lane)
|
|
{
|
|
struct tegra_xusb_sata_lane *sata = to_sata_lane(lane);
|
|
|
|
kfree(sata);
|
|
}
|
|
|
|
static const struct tegra_xusb_lane_ops tegra210_sata_lane_ops = {
|
|
.probe = tegra210_sata_lane_probe,
|
|
.remove = tegra210_sata_lane_remove,
|
|
.iddq_enable = tegra210_uphy_lane_iddq_enable,
|
|
.iddq_disable = tegra210_uphy_lane_iddq_disable,
|
|
.enable_phy_sleepwalk = tegra210_usb3_enable_phy_sleepwalk,
|
|
.disable_phy_sleepwalk = tegra210_usb3_disable_phy_sleepwalk,
|
|
.enable_phy_wake = tegra210_usb3_enable_phy_wake,
|
|
.disable_phy_wake = tegra210_usb3_disable_phy_wake,
|
|
.remote_wake_detected = tegra210_usb3_phy_remote_wake_detected,
|
|
};
|
|
|
|
static int tegra210_sata_phy_init(struct phy *phy)
|
|
{
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
|
|
mutex_lock(&padctl->lock);
|
|
|
|
tegra210_uphy_init(padctl);
|
|
|
|
mutex_unlock(&padctl->lock);
|
|
return 0;
|
|
}
|
|
|
|
static int tegra210_sata_phy_power_on(struct phy *phy)
|
|
{
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
int err = 0;
|
|
|
|
mutex_lock(&padctl->lock);
|
|
|
|
if (tegra_xusb_lane_check(lane, "usb3-ss"))
|
|
err = tegra210_usb3_phy_power_on(phy);
|
|
|
|
mutex_unlock(&padctl->lock);
|
|
return err;
|
|
}
|
|
|
|
static int tegra210_sata_phy_power_off(struct phy *phy)
|
|
{
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
int err = 0;
|
|
|
|
mutex_lock(&padctl->lock);
|
|
|
|
if (tegra_xusb_lane_check(lane, "usb3-ss"))
|
|
err = tegra210_usb3_phy_power_off(phy);
|
|
|
|
mutex_unlock(&padctl->lock);
|
|
return err;
|
|
}
|
|
|
|
static const struct phy_ops tegra210_sata_phy_ops = {
|
|
.init = tegra210_sata_phy_init,
|
|
.power_on = tegra210_sata_phy_power_on,
|
|
.power_off = tegra210_sata_phy_power_off,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static struct tegra_xusb_pad *
|
|
tegra210_sata_pad_probe(struct tegra_xusb_padctl *padctl,
|
|
const struct tegra_xusb_pad_soc *soc,
|
|
struct device_node *np)
|
|
{
|
|
struct tegra_xusb_sata_pad *sata;
|
|
struct tegra_xusb_pad *pad;
|
|
int err;
|
|
|
|
sata = kzalloc(sizeof(*sata), GFP_KERNEL);
|
|
if (!sata)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
pad = &sata->base;
|
|
pad->ops = &tegra210_sata_lane_ops;
|
|
pad->soc = soc;
|
|
|
|
err = tegra_xusb_pad_init(pad, padctl, np);
|
|
if (err < 0) {
|
|
kfree(sata);
|
|
goto out;
|
|
}
|
|
|
|
sata->rst = devm_reset_control_get(&pad->dev, "phy");
|
|
if (IS_ERR(sata->rst)) {
|
|
err = PTR_ERR(sata->rst);
|
|
dev_err(&pad->dev, "failed to get SATA pad reset: %d\n", err);
|
|
goto unregister;
|
|
}
|
|
|
|
err = tegra_xusb_pad_register(pad, &tegra210_sata_phy_ops);
|
|
if (err < 0)
|
|
goto unregister;
|
|
|
|
dev_set_drvdata(&pad->dev, pad);
|
|
|
|
return pad;
|
|
|
|
unregister:
|
|
device_unregister(&pad->dev);
|
|
out:
|
|
return ERR_PTR(err);
|
|
}
|
|
|
|
static void tegra210_sata_pad_remove(struct tegra_xusb_pad *pad)
|
|
{
|
|
struct tegra_xusb_sata_pad *sata = to_sata_pad(pad);
|
|
|
|
kfree(sata);
|
|
}
|
|
|
|
static const struct tegra_xusb_pad_ops tegra210_sata_ops = {
|
|
.probe = tegra210_sata_pad_probe,
|
|
.remove = tegra210_sata_pad_remove,
|
|
};
|
|
|
|
static const struct tegra_xusb_pad_soc tegra210_sata_pad = {
|
|
.name = "sata",
|
|
.num_lanes = ARRAY_SIZE(tegra210_sata_lanes),
|
|
.lanes = tegra210_sata_lanes,
|
|
.ops = &tegra210_sata_ops,
|
|
};
|
|
|
|
static const struct tegra_xusb_pad_soc * const tegra210_pads[] = {
|
|
&tegra210_usb2_pad,
|
|
&tegra210_hsic_pad,
|
|
&tegra210_pcie_pad,
|
|
&tegra210_sata_pad,
|
|
};
|
|
|
|
static int tegra210_usb2_port_enable(struct tegra_xusb_port *port)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void tegra210_usb2_port_disable(struct tegra_xusb_port *port)
|
|
{
|
|
}
|
|
|
|
static struct tegra_xusb_lane *
|
|
tegra210_usb2_port_map(struct tegra_xusb_port *port)
|
|
{
|
|
return tegra_xusb_find_lane(port->padctl, "usb2", port->index);
|
|
}
|
|
|
|
static const struct tegra_xusb_port_ops tegra210_usb2_port_ops = {
|
|
.release = tegra_xusb_usb2_port_release,
|
|
.remove = tegra_xusb_usb2_port_remove,
|
|
.enable = tegra210_usb2_port_enable,
|
|
.disable = tegra210_usb2_port_disable,
|
|
.map = tegra210_usb2_port_map,
|
|
};
|
|
|
|
static int tegra210_hsic_port_enable(struct tegra_xusb_port *port)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void tegra210_hsic_port_disable(struct tegra_xusb_port *port)
|
|
{
|
|
}
|
|
|
|
static struct tegra_xusb_lane *
|
|
tegra210_hsic_port_map(struct tegra_xusb_port *port)
|
|
{
|
|
return tegra_xusb_find_lane(port->padctl, "hsic", port->index);
|
|
}
|
|
|
|
static const struct tegra_xusb_port_ops tegra210_hsic_port_ops = {
|
|
.release = tegra_xusb_hsic_port_release,
|
|
.enable = tegra210_hsic_port_enable,
|
|
.disable = tegra210_hsic_port_disable,
|
|
.map = tegra210_hsic_port_map,
|
|
};
|
|
|
|
static int tegra210_usb3_port_enable(struct tegra_xusb_port *port)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void tegra210_usb3_port_disable(struct tegra_xusb_port *port)
|
|
{
|
|
}
|
|
|
|
static struct tegra_xusb_lane *
|
|
tegra210_usb3_port_map(struct tegra_xusb_port *port)
|
|
{
|
|
return tegra_xusb_port_find_lane(port, tegra210_usb3_map, "usb3-ss");
|
|
}
|
|
|
|
static const struct tegra_xusb_port_ops tegra210_usb3_port_ops = {
|
|
.release = tegra_xusb_usb3_port_release,
|
|
.remove = tegra_xusb_usb3_port_remove,
|
|
.enable = tegra210_usb3_port_enable,
|
|
.disable = tegra210_usb3_port_disable,
|
|
.map = tegra210_usb3_port_map,
|
|
};
|
|
|
|
static int tegra210_utmi_port_reset(struct phy *phy)
|
|
{
|
|
struct tegra_xusb_padctl *padctl;
|
|
struct tegra_xusb_lane *lane;
|
|
u32 value;
|
|
|
|
lane = phy_get_drvdata(phy);
|
|
padctl = lane->pad->padctl;
|
|
|
|
value = padctl_readl(padctl,
|
|
XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL0(lane->index));
|
|
|
|
if ((value & XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL0_ZIP) ||
|
|
(value & XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL0_ZIN)) {
|
|
tegra210_xusb_padctl_vbus_override(padctl, false);
|
|
tegra210_xusb_padctl_vbus_override(padctl, true);
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
tegra210_xusb_read_fuse_calibration(struct tegra210_xusb_fuse_calibration *fuse)
|
|
{
|
|
unsigned int i;
|
|
u32 value;
|
|
int err;
|
|
|
|
err = tegra_fuse_readl(TEGRA_FUSE_SKU_CALIB_0, &value);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(fuse->hs_curr_level); i++) {
|
|
fuse->hs_curr_level[i] =
|
|
(value >> FUSE_SKU_CALIB_HS_CURR_LEVEL_PADX_SHIFT(i)) &
|
|
FUSE_SKU_CALIB_HS_CURR_LEVEL_PAD_MASK;
|
|
}
|
|
|
|
fuse->hs_term_range_adj =
|
|
(value >> FUSE_SKU_CALIB_HS_TERM_RANGE_ADJ_SHIFT) &
|
|
FUSE_SKU_CALIB_HS_TERM_RANGE_ADJ_MASK;
|
|
|
|
err = tegra_fuse_readl(TEGRA_FUSE_USB_CALIB_EXT_0, &value);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
fuse->rpd_ctrl =
|
|
(value >> FUSE_USB_CALIB_EXT_RPD_CTRL_SHIFT) &
|
|
FUSE_USB_CALIB_EXT_RPD_CTRL_MASK;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct tegra_xusb_padctl *
|
|
tegra210_xusb_padctl_probe(struct device *dev,
|
|
const struct tegra_xusb_padctl_soc *soc)
|
|
{
|
|
struct tegra210_xusb_padctl *padctl;
|
|
struct platform_device *pdev;
|
|
struct device_node *np;
|
|
int err;
|
|
|
|
padctl = devm_kzalloc(dev, sizeof(*padctl), GFP_KERNEL);
|
|
if (!padctl)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
padctl->base.dev = dev;
|
|
padctl->base.soc = soc;
|
|
|
|
err = tegra210_xusb_read_fuse_calibration(&padctl->fuse);
|
|
if (err < 0)
|
|
return ERR_PTR(err);
|
|
|
|
np = of_parse_phandle(dev->of_node, "nvidia,pmc", 0);
|
|
if (!np) {
|
|
dev_warn(dev, "nvidia,pmc property is missing\n");
|
|
goto out;
|
|
}
|
|
|
|
pdev = of_find_device_by_node(np);
|
|
if (!pdev) {
|
|
dev_warn(dev, "PMC device is not available\n");
|
|
goto out;
|
|
}
|
|
|
|
if (!platform_get_drvdata(pdev))
|
|
return ERR_PTR(-EPROBE_DEFER);
|
|
|
|
padctl->regmap = dev_get_regmap(&pdev->dev, "usb_sleepwalk");
|
|
if (!padctl->regmap)
|
|
dev_info(dev, "failed to find PMC regmap\n");
|
|
|
|
out:
|
|
return &padctl->base;
|
|
}
|
|
|
|
static void tegra210_xusb_padctl_remove(struct tegra_xusb_padctl *padctl)
|
|
{
|
|
}
|
|
|
|
static void tegra210_xusb_padctl_save(struct tegra_xusb_padctl *padctl)
|
|
{
|
|
struct tegra210_xusb_padctl *priv = to_tegra210_xusb_padctl(padctl);
|
|
|
|
priv->context.usb2_pad_mux =
|
|
padctl_readl(padctl, XUSB_PADCTL_USB2_PAD_MUX);
|
|
priv->context.usb2_port_cap =
|
|
padctl_readl(padctl, XUSB_PADCTL_USB2_PORT_CAP);
|
|
priv->context.ss_port_map =
|
|
padctl_readl(padctl, XUSB_PADCTL_SS_PORT_MAP);
|
|
priv->context.usb3_pad_mux =
|
|
padctl_readl(padctl, XUSB_PADCTL_USB3_PAD_MUX);
|
|
}
|
|
|
|
static void tegra210_xusb_padctl_restore(struct tegra_xusb_padctl *padctl)
|
|
{
|
|
struct tegra210_xusb_padctl *priv = to_tegra210_xusb_padctl(padctl);
|
|
struct tegra_xusb_lane *lane;
|
|
|
|
padctl_writel(padctl, priv->context.usb2_pad_mux,
|
|
XUSB_PADCTL_USB2_PAD_MUX);
|
|
padctl_writel(padctl, priv->context.usb2_port_cap,
|
|
XUSB_PADCTL_USB2_PORT_CAP);
|
|
padctl_writel(padctl, priv->context.ss_port_map,
|
|
XUSB_PADCTL_SS_PORT_MAP);
|
|
|
|
list_for_each_entry(lane, &padctl->lanes, list) {
|
|
if (lane->pad->ops->iddq_enable)
|
|
tegra210_uphy_lane_iddq_enable(lane);
|
|
}
|
|
|
|
padctl_writel(padctl, priv->context.usb3_pad_mux,
|
|
XUSB_PADCTL_USB3_PAD_MUX);
|
|
|
|
list_for_each_entry(lane, &padctl->lanes, list) {
|
|
if (lane->pad->ops->iddq_disable)
|
|
tegra210_uphy_lane_iddq_disable(lane);
|
|
}
|
|
}
|
|
|
|
static int tegra210_xusb_padctl_suspend_noirq(struct tegra_xusb_padctl *padctl)
|
|
{
|
|
mutex_lock(&padctl->lock);
|
|
|
|
tegra210_uphy_deinit(padctl);
|
|
|
|
tegra210_xusb_padctl_save(padctl);
|
|
|
|
mutex_unlock(&padctl->lock);
|
|
return 0;
|
|
}
|
|
|
|
static int tegra210_xusb_padctl_resume_noirq(struct tegra_xusb_padctl *padctl)
|
|
{
|
|
mutex_lock(&padctl->lock);
|
|
|
|
tegra210_xusb_padctl_restore(padctl);
|
|
|
|
tegra210_uphy_init(padctl);
|
|
|
|
mutex_unlock(&padctl->lock);
|
|
return 0;
|
|
}
|
|
|
|
static const struct tegra_xusb_padctl_ops tegra210_xusb_padctl_ops = {
|
|
.probe = tegra210_xusb_padctl_probe,
|
|
.remove = tegra210_xusb_padctl_remove,
|
|
.suspend_noirq = tegra210_xusb_padctl_suspend_noirq,
|
|
.resume_noirq = tegra210_xusb_padctl_resume_noirq,
|
|
.usb3_set_lfps_detect = tegra210_usb3_set_lfps_detect,
|
|
.hsic_set_idle = tegra210_hsic_set_idle,
|
|
.vbus_override = tegra210_xusb_padctl_vbus_override,
|
|
.utmi_port_reset = tegra210_utmi_port_reset,
|
|
};
|
|
|
|
static const char * const tegra210_xusb_padctl_supply_names[] = {
|
|
"avdd-pll-utmip",
|
|
"avdd-pll-uerefe",
|
|
"dvdd-pex-pll",
|
|
"hvdd-pex-pll-e",
|
|
};
|
|
|
|
const struct tegra_xusb_padctl_soc tegra210_xusb_padctl_soc = {
|
|
.num_pads = ARRAY_SIZE(tegra210_pads),
|
|
.pads = tegra210_pads,
|
|
.ports = {
|
|
.usb2 = {
|
|
.ops = &tegra210_usb2_port_ops,
|
|
.count = 4,
|
|
},
|
|
.hsic = {
|
|
.ops = &tegra210_hsic_port_ops,
|
|
.count = 1,
|
|
},
|
|
.usb3 = {
|
|
.ops = &tegra210_usb3_port_ops,
|
|
.count = 4,
|
|
},
|
|
},
|
|
.ops = &tegra210_xusb_padctl_ops,
|
|
.supply_names = tegra210_xusb_padctl_supply_names,
|
|
.num_supplies = ARRAY_SIZE(tegra210_xusb_padctl_supply_names),
|
|
.need_fake_usb3_port = true,
|
|
};
|
|
EXPORT_SYMBOL_GPL(tegra210_xusb_padctl_soc);
|
|
|
|
MODULE_AUTHOR("Andrew Bresticker <abrestic@chromium.org>");
|
|
MODULE_DESCRIPTION("NVIDIA Tegra 210 XUSB Pad Controller driver");
|
|
MODULE_LICENSE("GPL v2");
|