linux/drivers/mtd/nand/raw/pasemi_nand.c
Linus Torvalds a701262c02 MTD core:
* Fix refcounting for unpartitioned MTDs
 * Fix misspelled function parameter 'section'
 * Remove unneeded break
 * cmdline parser: Fix parsing of part-names with colons
 * mtdpart: Fix misdocumented function parameter 'mtd'
 
 MTD devices:
 * phram:
   - Allow the user to set the erase page size
   - File headers are not good candidates for kernel-doc
 * physmap-bt1-rom: Fix __iomem addrspace removal warning
 * plat-ram: correctly free memory on error path in platram_probe()
 * powernv_flash: Add function names to headers and fix 'dev'
 * docg3: Fix kernel-doc 'bad line' and 'excessive doc' issues
 
 UBI cleanup fixes:
 * gluebi: Fix misnamed function parameter documentation
 * wl: Fix a couple of kernel-doc issues
 * eba: Fix a couple of misdocumentation issues
 * kapi: Correct documentation for 'ubi_leb_read_sg's 'sgl' parameter
 * Document 'ubi_num' in struct mtd_dev_param
 
 Generic NAND core:
 * ECC management:
   - Add an I/O request tweaking mechanism
   - Entire rework of the software BCH ECC driver, creation of a real
     ECC engine, getting rid of raw NAND structures, migration to more
     generic prototypes, misc fixes and style cleanup. Moved now to the
     Generic NAND layer.
   - Entire rework of the software Hamming ECC driver, creation of a
     real ECC engine, getting rid of raw NAND structures, misc renames,
     comment updates, cleanup, and style fixes. Moved now to the
     generic NAND layer.
   - Necessary plumbing at the NAND level to retrieve generic NAND ECC
     engines (softwares and on-die).
   - Update of the bindings.
 
 Raw NAND core:
 * Geting rid of the chip->ecc.priv entry.
 * Fix miscellaneous typos in kernel-doc
 
 Raw NAND controller drivers:
 * Arasan: Document 'anfc_op's 'buf' member
 * AU1550: Ensure the presence of the right includes
 * Brcmnand: Demote non-conformant kernel-doc headers
 * Cafe: Remove superfluous param doc and add another
 * Davinci: Do not use extra dereferencing
 * Diskonchip: Marking unused variables as __always_unused
 * GPMI:
   - Fix the driver only sense CS0 R/B issue
   - Fix the random DMA timeout issue
   - Use a single line for of_device_id
   - Use of_device_get_match_data()
   - Fix reference count leak in gpmi ops
   - Cleanup makefile
   - Fix binding matching of clocks on different SoCs
 * Ingenic: remove redundant get_device() in ingenic_ecc_get()
 * Intel LGM: New NAND controller driver
 * Marvell: Drop useless line
 * Meson:
   - Fix a resource leak in init
   - Fix meson_nfc_dma_buffer_release() arguments
 * mxc:
   - Use device_get_match_data()
   - Use a single line for of_device_id
   - Remove platform data support
 * Omap:
   - Fix a bunch of kernel-doc misdemeanours
   - Finish ELM half populated function header, demote empty ones
 * s3c2410: Add documentation for 2 missing struct members
 * Sunxi: Document 'sunxi_nfc's 'caps' member
 * Qcom:
   - Add support for SDX55
   - Support for IPQ6018 QPIC NAND controller
   - Fix DMA sync on FLASH_STATUS register read
 * Rockchip: New NAND controller driver for RK3308, RK2928 and others
 * Sunxi: Add MDMA support
 
 ONENAND:
 * bbt: Fix expected kernel-doc formatting
 * Fix some kernel-doc misdemeanours
 * Fix expected kernel-doc formatting
 * Use mtd->oops_panic_write as condition
 
 SPI-NAND core:
 * Creation of a SPI-NAND on-die ECC engine
 * Move ECC related definitions earlier in the driver
 * Fix typo in comment
 * Fill a default ECC provider/algorithm
 * Remove outdated comment
 * Fix OOB read
 * Allow the case where there is no ECC engine
 * Use the external ECC engine logic
 
 SPI-NAND chip drivers:
 * Micron:
   - Add support for MT29F2G01AAAED
   - Use more specific names
 * Macronix:
   - Add support for MX35LFxG24AD
   - Add support for MX35LFxGE4AD
 * Toshiba: Demote non-conformant kernel-doc header
 
 SPI-NOR core:
 * Initial support for stateful Octal DTR mode using volatile settings
 * Preliminary support for JEDEC 251 (xSPI) and JEDEC 216D standards
 * Support for Cypress Semper flash
 * Support to specify ECC block size of SPI NOR flashes
 * Fixes to avoid clearing of non-volatile Block Protection bits at
   probe
 * hisi-sfc: Demote non-conformant kernel-doc
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAl/aS1sACgkQJWrqGEe9
 VoTOqQgAiu3XfM7iHvFDiz0SVL+RFzqi2jnwXHgGDATTq+vOPwAMaqnqF6xZZZLA
 BIKsLwVRJnZ9Vu6Xl2vAPaVob+QKbsvvP9kkk9H/dZJ6IW4XsWFqYotPSQQ/6ZBO
 2bmw9nQ0ZcksyUkdASGHuYlW/H5DAtQNQuQxGF5ywlZMxTEnD0wxUD5tccf1o3xk
 UYvQsQ0MNMriWCxbcdUXUmDOE9DuPdDysuLDPJs0WLnlNGgwZ/mnLvSRm6wm4nRT
 Y/pB6VcTMMEYAsujdf89LjCHlfCQuH5Zls9pxic8GkHjOcEqUeMLLXkkbQ1+61AO
 93QsOhKAsju49/aHpbpvwu5SEmLojA==
 =1fie
 -----END PGP SIGNATURE-----

Merge tag 'mtd/for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull MTD updates from Miquel Raynal:
 "MTD core:
   - Fix refcounting for unpartitioned MTDs
   - Fix misspelled function parameter 'section'
   - Remove unneeded break
   - cmdline parser: Fix parsing of part-names with colons
   - mtdpart: Fix misdocumented function parameter 'mtd'

  MTD devices:
   - phram:
      - Allow the user to set the erase page size
      - File headers are not good candidates for kernel-doc
   - physmap-bt1-rom: Fix __iomem addrspace removal warning
   - plat-ram: correctly free memory on error path in platram_probe()
   - powernv_flash: Add function names to headers and fix 'dev'
   - docg3: Fix kernel-doc 'bad line' and 'excessive doc' issues

  UBI cleanup fixes:
   - gluebi: Fix misnamed function parameter documentation
   - wl: Fix a couple of kernel-doc issues
   - eba: Fix a couple of misdocumentation issues
   - kapi: Correct documentation for 'ubi_leb_read_sg's 'sgl' parameter
   - Document 'ubi_num' in struct mtd_dev_param

  Generic NAND core ECC management:
   - Add an I/O request tweaking mechanism
   - Entire rework of the software BCH ECC driver, creation of a real
     ECC engine, getting rid of raw NAND structures, migration to more
     generic prototypes, misc fixes and style cleanup. Moved now to the
     Generic NAND layer.
   - Entire rework of the software Hamming ECC driver, creation of a
     real ECC engine, getting rid of raw NAND structures, misc renames,
     comment updates, cleanup, and style fixes. Moved now to the generic
     NAND layer.
   - Necessary plumbing at the NAND level to retrieve generic NAND ECC
     engines (softwares and on-die).
   - Update of the bindings.

  Raw NAND core:
   - Geting rid of the chip->ecc.priv entry.
   - Fix miscellaneous typos in kernel-doc

  Raw NAND controller drivers:
   - Arasan: Document 'anfc_op's 'buf' member
   - AU1550: Ensure the presence of the right includes
   - Brcmnand: Demote non-conformant kernel-doc headers
   - Cafe: Remove superfluous param doc and add another
   - Davinci: Do not use extra dereferencing
   - Diskonchip: Marking unused variables as __always_unused
   - GPMI:
      - Fix the driver only sense CS0 R/B issue
      - Fix the random DMA timeout issue
      - Use a single line for of_device_id
      - Use of_device_get_match_data()
      - Fix reference count leak in gpmi ops
      - Cleanup makefile
      - Fix binding matching of clocks on different SoCs
   - Ingenic: remove redundant get_device() in ingenic_ecc_get()
   - Intel LGM: New NAND controller driver
   - Marvell: Drop useless line
   - Meson:
      - Fix a resource leak in init
      - Fix meson_nfc_dma_buffer_release() arguments
   - mxc:
      - Use device_get_match_data()
      - Use a single line for of_device_id
      - Remove platform data support
   - Omap:
      - Fix a bunch of kernel-doc misdemeanours
      - Finish ELM half populated function header, demote empty ones
   - s3c2410: Add documentation for 2 missing struct members
   - Sunxi: Document 'sunxi_nfc's 'caps' member
   - Qcom:
      - Add support for SDX55
      - Support for IPQ6018 QPIC NAND controller
      - Fix DMA sync on FLASH_STATUS register read
   - Rockchip: New NAND controller driver for RK3308, RK2928 and others
   - Sunxi: Add MDMA support

  ONENAND:
   - bbt: Fix expected kernel-doc formatting
   - Fix some kernel-doc misdemeanours
   - Fix expected kernel-doc formatting
   - Use mtd->oops_panic_write as condition

  SPI-NAND core:
   - Creation of a SPI-NAND on-die ECC engine
   - Move ECC related definitions earlier in the driver
   - Fix typo in comment
   - Fill a default ECC provider/algorithm
   - Remove outdated comment
   - Fix OOB read
   - Allow the case where there is no ECC engine
   - Use the external ECC engine logic

  SPI-NAND chip drivers:
   - Micron:
      - Add support for MT29F2G01AAAED
      - Use more specific names
   - Macronix:
      - Add support for MX35LFxG24AD
      - Add support for MX35LFxGE4AD
   - Toshiba: Demote non-conformant kernel-doc header

  SPI-NOR core:
   - Initial support for stateful Octal DTR mode using volatile settings
   - Preliminary support for JEDEC 251 (xSPI) and JEDEC 216D standards
   - Support for Cypress Semper flash
   - Support to specify ECC block size of SPI NOR flashes
   - Fixes to avoid clearing of non-volatile Block Protection bits at
     probe
   - hisi-sfc: Demote non-conformant kernel-doc"

* tag 'mtd/for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (120 commits)
  mtd: spinand: macronix: Add support for MX35LFxG24AD
  mtd: rawnand: rockchip: NFC driver for RK3308, RK2928 and others
  dt-bindings: mtd: Describe Rockchip RK3xxx NAND flash controller
  mtd: rawnand: gpmi: Use a single line for of_device_id
  mtd: rawnand: gpmi: Fix the random DMA timeout issue
  mtd: rawnand: gpmi: Fix the driver only sense CS0 R/B issue
  mtd: rawnand: qcom: Add NAND controller support for SDX55
  dt-bindings: qcom_nandc: Add SDX55 QPIC NAND documentation
  mtd: rawnand: mxc: Use a single line for of_device_id
  mtd: rawnand: mxc: Use device_get_match_data()
  mtd: rawnand: meson: Fix a resource leak in init
  mtd: rawnand: gpmi: Use of_device_get_match_data()
  mtd: rawnand: Add NAND controller support on Intel LGM SoC
  dt-bindings: mtd: Add Nand Flash Controller support for Intel LGM SoC
  mtd: spinand: micron: Add support for MT29F2G01AAAED
  mtd: spinand: micron: Use more specific names
  mtd: rawnand: gpmi: fix reference count leak in gpmi ops
  dt-bindings: mtd: gpmi-nand: Fix matching of clocks on different SoCs
  mtd: spinand: macronix: Add support for MX35LFxGE4AD
  mtd: plat-ram: correctly free memory on error path in platram_probe()
  ...
2020-12-16 14:58:35 -08:00

237 lines
5.0 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2006-2007 PA Semi, Inc
*
* Author: Egor Martovetsky <egor@pasemi.com>
* Maintained by: Olof Johansson <olof@lixom.net>
*
* Driver for the PWRficient onchip NAND flash interface
*/
#undef DEBUG
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/rawnand.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/pci.h>
#include <asm/io.h>
#define LBICTRL_LPCCTL_NR 0x00004000
#define CLE_PIN_CTL 15
#define ALE_PIN_CTL 14
static unsigned int lpcctl;
static struct mtd_info *pasemi_nand_mtd;
static struct nand_controller controller;
static const char driver_name[] = "pasemi-nand";
static void pasemi_read_buf(struct nand_chip *chip, u_char *buf, int len)
{
while (len > 0x800) {
memcpy_fromio(buf, chip->legacy.IO_ADDR_R, 0x800);
buf += 0x800;
len -= 0x800;
}
memcpy_fromio(buf, chip->legacy.IO_ADDR_R, len);
}
static void pasemi_write_buf(struct nand_chip *chip, const u_char *buf,
int len)
{
while (len > 0x800) {
memcpy_toio(chip->legacy.IO_ADDR_R, buf, 0x800);
buf += 0x800;
len -= 0x800;
}
memcpy_toio(chip->legacy.IO_ADDR_R, buf, len);
}
static void pasemi_hwcontrol(struct nand_chip *chip, int cmd,
unsigned int ctrl)
{
if (cmd == NAND_CMD_NONE)
return;
if (ctrl & NAND_CLE)
out_8(chip->legacy.IO_ADDR_W + (1 << CLE_PIN_CTL), cmd);
else
out_8(chip->legacy.IO_ADDR_W + (1 << ALE_PIN_CTL), cmd);
/* Push out posted writes */
eieio();
inl(lpcctl);
}
static int pasemi_device_ready(struct nand_chip *chip)
{
return !!(inl(lpcctl) & LBICTRL_LPCCTL_NR);
}
static int pasemi_attach_chip(struct nand_chip *chip)
{
chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
if (chip->ecc.algo == NAND_ECC_ALGO_UNKNOWN)
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
return 0;
}
static const struct nand_controller_ops pasemi_ops = {
.attach_chip = pasemi_attach_chip,
};
static int pasemi_nand_probe(struct platform_device *ofdev)
{
struct device *dev = &ofdev->dev;
struct pci_dev *pdev;
struct device_node *np = dev->of_node;
struct resource res;
struct nand_chip *chip;
int err = 0;
err = of_address_to_resource(np, 0, &res);
if (err)
return -EINVAL;
/* We only support one device at the moment */
if (pasemi_nand_mtd)
return -ENODEV;
dev_dbg(dev, "pasemi_nand at %pR\n", &res);
/* Allocate memory for MTD device structure and private data */
chip = kzalloc(sizeof(struct nand_chip), GFP_KERNEL);
if (!chip) {
err = -ENOMEM;
goto out;
}
controller.ops = &pasemi_ops;
nand_controller_init(&controller);
chip->controller = &controller;
pasemi_nand_mtd = nand_to_mtd(chip);
/* Link the private data with the MTD structure */
pasemi_nand_mtd->dev.parent = dev;
chip->legacy.IO_ADDR_R = of_iomap(np, 0);
chip->legacy.IO_ADDR_W = chip->legacy.IO_ADDR_R;
if (!chip->legacy.IO_ADDR_R) {
err = -EIO;
goto out_mtd;
}
pdev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa008, NULL);
if (!pdev) {
err = -ENODEV;
goto out_ior;
}
lpcctl = pci_resource_start(pdev, 0);
pci_dev_put(pdev);
if (!request_region(lpcctl, 4, driver_name)) {
err = -EBUSY;
goto out_ior;
}
chip->legacy.cmd_ctrl = pasemi_hwcontrol;
chip->legacy.dev_ready = pasemi_device_ready;
chip->legacy.read_buf = pasemi_read_buf;
chip->legacy.write_buf = pasemi_write_buf;
chip->legacy.chip_delay = 0;
/* Enable the following for a flash based bad block table */
chip->bbt_options = NAND_BBT_USE_FLASH;
/* Scan to find existence of the device */
err = nand_scan(chip, 1);
if (err)
goto out_lpc;
if (mtd_device_register(pasemi_nand_mtd, NULL, 0)) {
dev_err(dev, "Unable to register MTD device\n");
err = -ENODEV;
goto out_cleanup_nand;
}
dev_info(dev, "PA Semi NAND flash at %pR, control at I/O %x\n", &res,
lpcctl);
return 0;
out_cleanup_nand:
nand_cleanup(chip);
out_lpc:
release_region(lpcctl, 4);
out_ior:
iounmap(chip->legacy.IO_ADDR_R);
out_mtd:
kfree(chip);
out:
return err;
}
static int pasemi_nand_remove(struct platform_device *ofdev)
{
struct nand_chip *chip;
int ret;
if (!pasemi_nand_mtd)
return 0;
chip = mtd_to_nand(pasemi_nand_mtd);
/* Release resources, unregister device */
ret = mtd_device_unregister(pasemi_nand_mtd);
WARN_ON(ret);
nand_cleanup(chip);
release_region(lpcctl, 4);
iounmap(chip->legacy.IO_ADDR_R);
/* Free the MTD device structure */
kfree(chip);
pasemi_nand_mtd = NULL;
return 0;
}
static const struct of_device_id pasemi_nand_match[] =
{
{
.compatible = "pasemi,localbus-nand",
},
{},
};
MODULE_DEVICE_TABLE(of, pasemi_nand_match);
static struct platform_driver pasemi_nand_driver =
{
.driver = {
.name = driver_name,
.of_match_table = pasemi_nand_match,
},
.probe = pasemi_nand_probe,
.remove = pasemi_nand_remove,
};
module_platform_driver(pasemi_nand_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Egor Martovetsky <egor@pasemi.com>");
MODULE_DESCRIPTION("NAND flash interface driver for PA Semi PWRficient");