linux

iv/linux

History

Adrian Bunk 542a3a3bc9 powerpc/boot: Change spaces to tabs

For C code spaces versus tabs is just a religious issue,
but for Makefiles it actually matters.

This patch fixes he following errors:
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/powerpc/boot/Makefile:166: *** missing separator.  Stop.
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/powerpc/boot/Makefile:171: *** missing separator.  Stop.

Since this was inside an ifdef DTC_GENPARSER it was not a problem unless
someone wanted to regenerate the shipped generated files.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

2008-07-22 10:39:35 +10:00

dtc-src

[POWERPC] Update .gitignore files

2008-01-17 14:57:09 +11:00

dts

powerpc/86xx: mpc8610_hpcd - add support for ULI RTC

2008-07-16 17:57:43 -05:00

libfdt

[POWERPC] Merge libfdt upstream source

2007-12-11 13:46:13 +11:00

.gitignore

[POWERPC] Update arch/powerpc/boot/.gitignore

2008-05-20 00:35:29 -05:00

4xx.c

[POWERPC] 4xx: Workaround for CHIP_11 Errata

2008-05-19 09:36:40 -05:00

4xx.h

[POWERPC] 4xx: Add 405GPr and 405EP support in boot wrapper

2008-01-08 07:58:09 -06:00

44x.h

[POWERPC] cuimage for Bamboo board

2007-09-19 21:13:16 -05:00

addnote.c

powerpc: Change the default link address for pSeries zImage kernels

2008-07-01 11:28:32 +10:00

addRamDisk.c

powerpc: Move ppc64 boot wrapper code over to arch/powerpc

2005-11-16 13:52:21 +11:00

bamboo.c

[POWERPC] Start removing linux,network-index in favour of aliases

2008-03-26 07:19:16 -05:00

cpm-serial.c

[POWERPC] cpm-serial: Relocate CPM buffer descriptors and SMC parameter ram.

2008-04-17 01:01:37 -05:00

crt0.S

[POWERPC] Fix building of COFF zImages

2007-06-07 22:21:31 +10:00

crtsavres.S

[POWERPC] Fix bootwrapper builds with newer gcc versions

2008-06-16 15:00:52 +10:00

cuboot-8xx.c

[POWERPC] Use embedded libfdt in the bootwrapper

2007-12-11 13:46:14 +11:00

cuboot-52xx.c

[POWERPC] Use embedded libfdt in the bootwrapper

2007-12-11 13:46:14 +11:00

cuboot-83xx.c

[POWERPC] bootwrapper: convert cuboot-8{3,5}xx to dt_fixup_mac_address_by_alias

2008-01-23 19:32:47 -06:00

cuboot-85xx-cpm2.c

[POWERPC] Add a cuboot wrapper for 85xx with CPM2

2008-01-27 14:10:36 -06:00

cuboot-85xx.c

[POWERPC] bootwrapper: convert cuboot-8{3,5}xx to dt_fixup_mac_address_by_alias

2008-01-23 19:32:47 -06:00

cuboot-824x.c

[POWERPC] Add initial iomega StorCenter board port.

2008-01-23 19:54:36 -06:00

cuboot-bamboo.c

[POWERPC] 4xx: Use correct board info structure in cuboot wrappers

2008-02-28 08:16:27 -06:00

cuboot-c2k.c

powerpc: Boot code for the C2K

2008-06-09 13:42:25 +10:00

cuboot-ebony.c

[POWERPC] 4xx: Use correct board info structure in cuboot wrappers

2008-02-28 08:16:27 -06:00

cuboot-katmai.c

[POWERPC] 4xx: Use correct board info structure in cuboot wrappers

2008-02-28 08:16:27 -06:00

cuboot-mpc7448hpc2.c

[POWERPC] bootwrapper: Build multiple cuImages

2008-02-07 11:40:19 +11:00

cuboot-pq2.c

[POWERPC] cuboot-pq2: PCI fixes

2008-04-17 01:01:40 -05:00

cuboot-rainier.c

[POWERPC] Start removing linux,network-index in favour of aliases

2008-03-26 07:19:16 -05:00

cuboot-sam440ep.c

powerpc/4xx: Sam440ep support

2008-06-11 08:32:49 -04:00

cuboot-sequoia.c

[POWERPC] Start removing linux,network-index in favour of aliases

2008-03-26 07:19:16 -05:00

cuboot-taishan.c

[POWERPC] Start removing linux,network-index in favour of aliases

2008-03-26 07:19:16 -05:00

cuboot-warp.c

[POWERPC] PIKA Warp: Update platform code to support Rev B boards

2008-05-29 07:06:56 -05:00

cuboot-yosemite.c

[POWERPC] 4xx: Add bootwrapper for AMCC Yosemite board

2008-03-26 07:19:17 -05:00

cuboot.c

[POWERPC] bootwrapper: Move linker symbols into ops.h

2007-08-22 15:27:28 +10:00

cuboot.h

[POWERPC] Consolidate cuboot initialization code

2007-06-14 22:30:16 +10:00

dcr.h

[POWERPC] 4xx: Add 405GPr and 405EP support in boot wrapper

2008-01-08 07:58:09 -06:00

devtree.c

[POWERPC] Add bootwrapper function to get virtual reg from the device tree.

2008-04-17 01:01:37 -05:00

div64.S

powerpc: Move ppc64 boot wrapper code over to arch/powerpc

2005-11-16 13:52:21 +11:00

dummy.c

powerpc/32: Generate miboot images with ARCH=powerpc

2006-01-15 13:00:08 +11:00

ebony.c

[POWERPC] Start removing linux,network-index in favour of aliases

2008-03-26 07:19:16 -05:00

elf_util.c

[POWERPC] Move bootwrapper ELF parsing routines to a file

2007-04-13 03:55:16 +10:00

elf.h

[POWERPC] Move bootwrapper ELF parsing routines to a file

2007-04-13 03:55:16 +10:00

ep88xc.c

[POWERPC] Use embedded libfdt in the bootwrapper

2007-12-11 13:46:14 +11:00

ep405.c

[POWERPC] 4xx: EP405 boards support for arch/powerpc

2007-12-23 13:13:14 -06:00

ep8248e.c

[POWERPC] 82xx: Embedded Planet EP8248E support

2008-01-23 19:34:43 -06:00

fixed-head.S

[POWERPC] 8xx/wrapper: Embedded Planet EP88xC support

2007-10-04 11:02:40 -05:00

flatdevtree_env.h

Fix file references in documentation and Kconfig

2008-01-22 10:43:36 -08:00

fsl-soc.c

[POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions.

2007-10-03 20:36:35 -05:00

fsl-soc.h

[POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions.

2007-10-03 20:36:35 -05:00

gunzip_util.c

[POWERPC] boot: Simplify gunzip_finish

2007-10-03 11:48:43 +10:00

gunzip_util.h

[POWERPC] Add documentation for the zImage's gunzip convenience functions

2007-03-16 16:38:19 +11:00

hack-coff.c

powerpc: Make COFF zImages for old 32-bit powermacs

2006-01-14 15:04:06 +11:00

holly.c

[POWERPC] Use embedded libfdt in the bootwrapper

2007-12-11 13:46:14 +11:00

install.sh

[PATCH] powerpc: trivial: modify comments to refer to new location of files

2006-02-10 16:53:51 +11:00

io.h

[POWERPC] bootwrapper: Add 16-bit I/O, sync(), eieio(), and barrier()

2007-08-22 15:21:48 +10:00

libfdt_env.h

[POWERPC] Use embedded libfdt in the bootwrapper

2007-12-11 13:46:14 +11:00

libfdt-wrapper.c

[POWERPC] Replace remaining __FUNCTION__ occurrences

2008-04-01 20:43:09 +11:00

main.c

[POWERPC] Kill flatdevtree.c

2007-12-11 13:46:15 +11:00

Makefile

powerpc/boot: Change spaces to tabs

2008-07-22 10:39:35 +10:00

mktree.c

[POWERPC] Support for the Ebony 440GP reference board in arch/powerpc

2007-05-08 14:47:32 +10:00

mpc8xx.c

[POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions.

2007-10-03 20:36:35 -05:00

mpc8xx.h

[POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions.

2007-10-03 20:36:35 -05:00

mpc52xx-psc.c

[POWERPC] Add bootwrapper function to get virtual reg from the device tree.

2008-04-17 01:01:37 -05:00

mpsc.c

[POWERPC] prpmc2800: Clean up dts properties

2008-04-15 21:21:24 +10:00

mv64x60_i2c.c

[POWERPC] mv64x60: Remove device tree absolute path references

2008-04-15 21:21:24 +10:00

mv64x60.c

[POWERPC] mv64x60: Remove device tree absolute path references

2008-04-15 21:21:24 +10:00

mv64x60.h

[POWERPC] Add bootwrapper support for Marvell/mv64x60 hostbridge

2007-05-12 11:32:49 +10:00

ns16550.c

[POWERPC] Xilinx: boot support for Xilinx uart 16550.

2008-04-24 13:32:46 -05:00

of.c

[POWERPC] bootwrapper: Move linker symbols into ops.h

2007-08-22 15:27:28 +10:00

of.h

[POWERPC] Make more OF-related bootwrapper functions available to non-OF platforms

2007-06-28 19:19:28 +10:00

ofconsole.c

[POWERPC] Make more OF-related bootwrapper functions available to non-OF platforms

2007-06-28 19:19:28 +10:00

oflib.c

powerpc: Change the default link address for pSeries zImage kernels

2008-07-01 11:28:32 +10:00

ops.h

[POWERPC] Add bootwrapper function to get virtual reg from the device tree.

2008-04-17 01:01:37 -05:00

page.h

powerpc: Move ppc64 boot wrapper code over to arch/powerpc

2005-11-16 13:52:21 +11:00

planetcore.c

[POWERPC] bootwrapper: Add PlanetCore firmware support

2007-10-03 11:48:43 +10:00

planetcore.h

[POWERPC] bootwrapper: Add PlanetCore firmware support

2007-10-03 11:48:43 +10:00

ppc_asm.h

powerpc: Move ppc64 boot wrapper code over to arch/powerpc

2005-11-16 13:52:21 +11:00

ppcboot.h

[POWERPC] bootwrapper: Add TARGET_HAS_ETHn tests to ppcboot.h

2007-08-22 15:21:48 +10:00

pq2.c

[POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions.

2007-10-03 20:36:35 -05:00

pq2.h

[POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions.

2007-10-03 20:36:35 -05:00

prpmc2800.c

[POWERPC] mv64x60: Remove device tree absolute path references

2008-04-15 21:21:24 +10:00

ps3-head.S

[POWERPC] PS3: Bootwrapper improvements

2008-04-01 20:43:07 +11:00

ps3-hvcall.S

[POWERPC] PS3: Fix bootwrapper hang bug

2008-02-14 22:11:01 +11:00

ps3.c

[POWERPC] PS3: Bootwrapper improvements

2008-04-01 20:43:07 +11:00

README

powerpc: Move ppc64 boot wrapper code over to arch/powerpc

2005-11-16 13:52:21 +11:00

redboot-8xx.c

[POWERPC] 8xx: Analogue & Micro Adder875 board support.

2008-01-23 19:34:40 -06:00

redboot-83xx.c

[POWERPC] 83xx: Add support for Analogue & Micro ASP837E board

2008-06-02 14:44:25 -05:00

redboot.h

[POWERPC] 8xx: Analogue & Micro Adder875 board support.

2008-01-23 19:34:40 -06:00

reg.h

[POWERPC] 4xx: Add mfspr/mtspr inline macros to 4xx bootwrapper

2007-12-23 13:14:22 -06:00

rs6000.h

powerpc: Make COFF zImages for old 32-bit powermacs

2006-01-14 15:04:06 +11:00

serial.c

[POWERPC] mv64x60: Fix FDT compatible names: mv64x60 => mv64360

2008-04-15 21:21:24 +10:00

simple_alloc.c

[POWERPC] bootwrapper: Use `unsigned long' for malloc sizes

2007-04-24 22:06:54 +10:00

simpleboot.c

powerpc/virtex: Fix booting of Xilinx FPGAs with 16550 for 405 and 440

2008-07-04 00:58:59 -06:00

stdio.c

[POWERPC] Add u64 printf to bootwrapper

2007-06-28 19:16:48 +10:00

stdio.h

[POWERPC] Add gcc format warnings to zImage printf()

2007-03-26 15:11:20 +10:00

stdlib.c

[POWERPC] bootwrapper: Add strtoull()

2007-09-14 01:33:23 +10:00

stdlib.h

[POWERPC] bootwrapper: Add strtoull()

2007-09-14 01:33:23 +10:00

string.h

[POWERPC] Add memchr() to the bootwrapper

2007-10-12 14:13:44 +10:00

string.S

[POWERPC] Add memchr() to the bootwrapper

2007-10-12 14:13:44 +10:00

treeboot-bamboo.c

[POWERPC] cuimage for Bamboo board

2007-09-19 21:13:16 -05:00

treeboot-ebony.c

[POWERPC] bootwrapper: Move linker symbols into ops.h

2007-08-22 15:27:28 +10:00

treeboot-walnut.c

[POWERPC] Start removing linux,network-index in favour of aliases

2008-03-26 07:19:16 -05:00

types.h

[POWERPC] Add signed types to bootwrapper

2007-06-28 19:16:47 +10:00

uartlite.c

[POWERPC] Uartlite: bootwrapper bug fix, getc loops forever

2007-10-10 09:14:35 -06:00

util.S

[POWERPC] Add non-OF serial console support

2006-10-23 12:49:19 +10:00

virtex405-head.S

[POWERPC] bootwrapper: Add a firmware-independent simpleboot target.

2008-04-02 20:36:11 -05:00

virtex.c

powerpc/virtex: Fix booting of Xilinx FPGAs with 16550 for 405 and 440

2008-07-04 00:58:59 -06:00

wrapper

powerpc/bootwrapper: add missing bit of simpleImage target

2008-07-04 00:59:37 -06:00

zImage.coff.lds.S

powerpc: Change the default link address for pSeries zImage kernels

2008-07-01 11:28:32 +10:00

zImage.lds.S

powerpc: Change the default link address for pSeries zImage kernels

2008-07-01 11:28:32 +10:00

zImage.ps3.lds.S

[POWERPC] PS3: Bootwrapper support.

2007-07-10 21:56:40 +10:00

README

To extract the kernel vmlinux, System.map, .config or initrd from the zImage binary:

objcopy -j .kernel:vmlinux -O binary zImage vmlinux.gz
objcopy -j .kernel:System.map -O binary zImage System.map.gz
objcopy -j .kernel:.config -O binary zImage config.gz
objcopy -j .kernel:initrd -O binary zImage.initrd initrd.gz


	Peter