6d66507d9b
If we're sending bytes over SPI, we know the FIFO is empty at the start of the transfer. There's no reason to wait for the interrupt telling us to start--we can just start right away. Then if we transmit everything in one swell foop we don't even need to bother listening for TX interrupts. In a test of "flashrom -p ec -r /tmp/foo.bin" interrupts were reduced from ~30560 to ~29730, about a 3% savings. This patch looks bigger than it is because I moved a few functions rather than adding a forward declaration. The only actual change to geni_spi_handle_tx() was to make it return a bool indicating if there is more to tx. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Akash Asthana <akashast@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200912111716.1.Ied5e843fad0d6b733a1fb8bcfb364dd2fa889eb3@changeid Signed-off-by: Mark Brown <broonie@kernel.org>
788 lines
21 KiB
C
788 lines
21 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
// Copyright (c) 2017-2018, The Linux foundation. All rights reserved.
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/log2.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_opp.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/qcom-geni-se.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
/* SPI SE specific registers and respective register fields */
|
|
#define SE_SPI_CPHA 0x224
|
|
#define CPHA BIT(0)
|
|
|
|
#define SE_SPI_LOOPBACK 0x22c
|
|
#define LOOPBACK_ENABLE 0x1
|
|
#define NORMAL_MODE 0x0
|
|
#define LOOPBACK_MSK GENMASK(1, 0)
|
|
|
|
#define SE_SPI_CPOL 0x230
|
|
#define CPOL BIT(2)
|
|
|
|
#define SE_SPI_DEMUX_OUTPUT_INV 0x24c
|
|
#define CS_DEMUX_OUTPUT_INV_MSK GENMASK(3, 0)
|
|
|
|
#define SE_SPI_DEMUX_SEL 0x250
|
|
#define CS_DEMUX_OUTPUT_SEL GENMASK(3, 0)
|
|
|
|
#define SE_SPI_TRANS_CFG 0x25c
|
|
#define CS_TOGGLE BIT(0)
|
|
|
|
#define SE_SPI_WORD_LEN 0x268
|
|
#define WORD_LEN_MSK GENMASK(9, 0)
|
|
#define MIN_WORD_LEN 4
|
|
|
|
#define SE_SPI_TX_TRANS_LEN 0x26c
|
|
#define SE_SPI_RX_TRANS_LEN 0x270
|
|
#define TRANS_LEN_MSK GENMASK(23, 0)
|
|
|
|
#define SE_SPI_PRE_POST_CMD_DLY 0x274
|
|
|
|
#define SE_SPI_DELAY_COUNTERS 0x278
|
|
#define SPI_INTER_WORDS_DELAY_MSK GENMASK(9, 0)
|
|
#define SPI_CS_CLK_DELAY_MSK GENMASK(19, 10)
|
|
#define SPI_CS_CLK_DELAY_SHFT 10
|
|
|
|
/* M_CMD OP codes for SPI */
|
|
#define SPI_TX_ONLY 1
|
|
#define SPI_RX_ONLY 2
|
|
#define SPI_TX_RX 7
|
|
#define SPI_CS_ASSERT 8
|
|
#define SPI_CS_DEASSERT 9
|
|
#define SPI_SCK_ONLY 10
|
|
/* M_CMD params for SPI */
|
|
#define SPI_PRE_CMD_DELAY BIT(0)
|
|
#define TIMESTAMP_BEFORE BIT(1)
|
|
#define FRAGMENTATION BIT(2)
|
|
#define TIMESTAMP_AFTER BIT(3)
|
|
#define POST_CMD_DELAY BIT(4)
|
|
|
|
struct spi_geni_master {
|
|
struct geni_se se;
|
|
struct device *dev;
|
|
u32 tx_fifo_depth;
|
|
u32 fifo_width_bits;
|
|
u32 tx_wm;
|
|
u32 last_mode;
|
|
unsigned long cur_speed_hz;
|
|
unsigned long cur_sclk_hz;
|
|
unsigned int cur_bits_per_word;
|
|
unsigned int tx_rem_bytes;
|
|
unsigned int rx_rem_bytes;
|
|
const struct spi_transfer *cur_xfer;
|
|
struct completion cs_done;
|
|
struct completion cancel_done;
|
|
struct completion abort_done;
|
|
unsigned int oversampling;
|
|
spinlock_t lock;
|
|
int irq;
|
|
bool cs_flag;
|
|
};
|
|
|
|
static int get_spi_clk_cfg(unsigned int speed_hz,
|
|
struct spi_geni_master *mas,
|
|
unsigned int *clk_idx,
|
|
unsigned int *clk_div)
|
|
{
|
|
unsigned long sclk_freq;
|
|
unsigned int actual_hz;
|
|
int ret;
|
|
|
|
ret = geni_se_clk_freq_match(&mas->se,
|
|
speed_hz * mas->oversampling,
|
|
clk_idx, &sclk_freq, false);
|
|
if (ret) {
|
|
dev_err(mas->dev, "Failed(%d) to find src clk for %dHz\n",
|
|
ret, speed_hz);
|
|
return ret;
|
|
}
|
|
|
|
*clk_div = DIV_ROUND_UP(sclk_freq, mas->oversampling * speed_hz);
|
|
actual_hz = sclk_freq / (mas->oversampling * *clk_div);
|
|
|
|
dev_dbg(mas->dev, "req %u=>%u sclk %lu, idx %d, div %d\n", speed_hz,
|
|
actual_hz, sclk_freq, *clk_idx, *clk_div);
|
|
ret = dev_pm_opp_set_rate(mas->dev, sclk_freq);
|
|
if (ret)
|
|
dev_err(mas->dev, "dev_pm_opp_set_rate failed %d\n", ret);
|
|
else
|
|
mas->cur_sclk_hz = sclk_freq;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void handle_fifo_timeout(struct spi_master *spi,
|
|
struct spi_message *msg)
|
|
{
|
|
struct spi_geni_master *mas = spi_master_get_devdata(spi);
|
|
unsigned long time_left;
|
|
struct geni_se *se = &mas->se;
|
|
|
|
spin_lock_irq(&mas->lock);
|
|
reinit_completion(&mas->cancel_done);
|
|
writel(0, se->base + SE_GENI_TX_WATERMARK_REG);
|
|
mas->cur_xfer = NULL;
|
|
geni_se_cancel_m_cmd(se);
|
|
spin_unlock_irq(&mas->lock);
|
|
|
|
time_left = wait_for_completion_timeout(&mas->cancel_done, HZ);
|
|
if (time_left)
|
|
return;
|
|
|
|
spin_lock_irq(&mas->lock);
|
|
reinit_completion(&mas->abort_done);
|
|
geni_se_abort_m_cmd(se);
|
|
spin_unlock_irq(&mas->lock);
|
|
|
|
time_left = wait_for_completion_timeout(&mas->abort_done, HZ);
|
|
if (!time_left)
|
|
dev_err(mas->dev, "Failed to cancel/abort m_cmd\n");
|
|
}
|
|
|
|
static void spi_geni_set_cs(struct spi_device *slv, bool set_flag)
|
|
{
|
|
struct spi_geni_master *mas = spi_master_get_devdata(slv->master);
|
|
struct spi_master *spi = dev_get_drvdata(mas->dev);
|
|
struct geni_se *se = &mas->se;
|
|
unsigned long time_left;
|
|
|
|
if (!(slv->mode & SPI_CS_HIGH))
|
|
set_flag = !set_flag;
|
|
|
|
if (set_flag == mas->cs_flag)
|
|
return;
|
|
|
|
mas->cs_flag = set_flag;
|
|
|
|
pm_runtime_get_sync(mas->dev);
|
|
spin_lock_irq(&mas->lock);
|
|
reinit_completion(&mas->cs_done);
|
|
if (set_flag)
|
|
geni_se_setup_m_cmd(se, SPI_CS_ASSERT, 0);
|
|
else
|
|
geni_se_setup_m_cmd(se, SPI_CS_DEASSERT, 0);
|
|
spin_unlock_irq(&mas->lock);
|
|
|
|
time_left = wait_for_completion_timeout(&mas->cs_done, HZ);
|
|
if (!time_left)
|
|
handle_fifo_timeout(spi, NULL);
|
|
|
|
pm_runtime_put(mas->dev);
|
|
}
|
|
|
|
static void spi_setup_word_len(struct spi_geni_master *mas, u16 mode,
|
|
unsigned int bits_per_word)
|
|
{
|
|
unsigned int pack_words;
|
|
bool msb_first = (mode & SPI_LSB_FIRST) ? false : true;
|
|
struct geni_se *se = &mas->se;
|
|
u32 word_len;
|
|
|
|
/*
|
|
* If bits_per_word isn't a byte aligned value, set the packing to be
|
|
* 1 SPI word per FIFO word.
|
|
*/
|
|
if (!(mas->fifo_width_bits % bits_per_word))
|
|
pack_words = mas->fifo_width_bits / bits_per_word;
|
|
else
|
|
pack_words = 1;
|
|
geni_se_config_packing(&mas->se, bits_per_word, pack_words, msb_first,
|
|
true, true);
|
|
word_len = (bits_per_word - MIN_WORD_LEN) & WORD_LEN_MSK;
|
|
writel(word_len, se->base + SE_SPI_WORD_LEN);
|
|
}
|
|
|
|
static int geni_spi_set_clock_and_bw(struct spi_geni_master *mas,
|
|
unsigned long clk_hz)
|
|
{
|
|
u32 clk_sel, m_clk_cfg, idx, div;
|
|
struct geni_se *se = &mas->se;
|
|
int ret;
|
|
|
|
if (clk_hz == mas->cur_speed_hz)
|
|
return 0;
|
|
|
|
ret = get_spi_clk_cfg(clk_hz, mas, &idx, &div);
|
|
if (ret) {
|
|
dev_err(mas->dev, "Err setting clk to %lu: %d\n", clk_hz, ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* SPI core clock gets configured with the requested frequency
|
|
* or the frequency closer to the requested frequency.
|
|
* For that reason requested frequency is stored in the
|
|
* cur_speed_hz and referred in the consecutive transfer instead
|
|
* of calling clk_get_rate() API.
|
|
*/
|
|
mas->cur_speed_hz = clk_hz;
|
|
|
|
clk_sel = idx & CLK_SEL_MSK;
|
|
m_clk_cfg = (div << CLK_DIV_SHFT) | SER_CLK_EN;
|
|
writel(clk_sel, se->base + SE_GENI_CLK_SEL);
|
|
writel(m_clk_cfg, se->base + GENI_SER_M_CLK_CFG);
|
|
|
|
/* Set BW quota for CPU as driver supports FIFO mode only. */
|
|
se->icc_paths[CPU_TO_GENI].avg_bw = Bps_to_icc(mas->cur_speed_hz);
|
|
ret = geni_icc_set_bw(se);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int setup_fifo_params(struct spi_device *spi_slv,
|
|
struct spi_master *spi)
|
|
{
|
|
struct spi_geni_master *mas = spi_master_get_devdata(spi);
|
|
struct geni_se *se = &mas->se;
|
|
u32 loopback_cfg = 0, cpol = 0, cpha = 0, demux_output_inv = 0;
|
|
u32 demux_sel;
|
|
|
|
if (mas->last_mode != spi_slv->mode) {
|
|
if (spi_slv->mode & SPI_LOOP)
|
|
loopback_cfg = LOOPBACK_ENABLE;
|
|
|
|
if (spi_slv->mode & SPI_CPOL)
|
|
cpol = CPOL;
|
|
|
|
if (spi_slv->mode & SPI_CPHA)
|
|
cpha = CPHA;
|
|
|
|
if (spi_slv->mode & SPI_CS_HIGH)
|
|
demux_output_inv = BIT(spi_slv->chip_select);
|
|
|
|
demux_sel = spi_slv->chip_select;
|
|
mas->cur_bits_per_word = spi_slv->bits_per_word;
|
|
|
|
spi_setup_word_len(mas, spi_slv->mode, spi_slv->bits_per_word);
|
|
writel(loopback_cfg, se->base + SE_SPI_LOOPBACK);
|
|
writel(demux_sel, se->base + SE_SPI_DEMUX_SEL);
|
|
writel(cpha, se->base + SE_SPI_CPHA);
|
|
writel(cpol, se->base + SE_SPI_CPOL);
|
|
writel(demux_output_inv, se->base + SE_SPI_DEMUX_OUTPUT_INV);
|
|
|
|
mas->last_mode = spi_slv->mode;
|
|
}
|
|
|
|
return geni_spi_set_clock_and_bw(mas, spi_slv->max_speed_hz);
|
|
}
|
|
|
|
static int spi_geni_prepare_message(struct spi_master *spi,
|
|
struct spi_message *spi_msg)
|
|
{
|
|
int ret;
|
|
struct spi_geni_master *mas = spi_master_get_devdata(spi);
|
|
|
|
ret = setup_fifo_params(spi_msg->spi, spi);
|
|
if (ret)
|
|
dev_err(mas->dev, "Couldn't select mode %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int spi_geni_init(struct spi_geni_master *mas)
|
|
{
|
|
struct geni_se *se = &mas->se;
|
|
unsigned int proto, major, minor, ver;
|
|
u32 spi_tx_cfg;
|
|
|
|
pm_runtime_get_sync(mas->dev);
|
|
|
|
proto = geni_se_read_proto(se);
|
|
if (proto != GENI_SE_SPI) {
|
|
dev_err(mas->dev, "Invalid proto %d\n", proto);
|
|
pm_runtime_put(mas->dev);
|
|
return -ENXIO;
|
|
}
|
|
mas->tx_fifo_depth = geni_se_get_tx_fifo_depth(se);
|
|
|
|
/* Width of Tx and Rx FIFO is same */
|
|
mas->fifo_width_bits = geni_se_get_tx_fifo_width(se);
|
|
|
|
/*
|
|
* Hardware programming guide suggests to configure
|
|
* RX FIFO RFR level to fifo_depth-2.
|
|
*/
|
|
geni_se_init(se, mas->tx_fifo_depth - 3, mas->tx_fifo_depth - 2);
|
|
/* Transmit an entire FIFO worth of data per IRQ */
|
|
mas->tx_wm = 1;
|
|
ver = geni_se_get_qup_hw_version(se);
|
|
major = GENI_SE_VERSION_MAJOR(ver);
|
|
minor = GENI_SE_VERSION_MINOR(ver);
|
|
|
|
if (major == 1 && minor == 0)
|
|
mas->oversampling = 2;
|
|
else
|
|
mas->oversampling = 1;
|
|
|
|
geni_se_select_mode(se, GENI_SE_FIFO);
|
|
|
|
/* We always control CS manually */
|
|
spi_tx_cfg = readl(se->base + SE_SPI_TRANS_CFG);
|
|
spi_tx_cfg &= ~CS_TOGGLE;
|
|
writel(spi_tx_cfg, se->base + SE_SPI_TRANS_CFG);
|
|
|
|
pm_runtime_put(mas->dev);
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int geni_byte_per_fifo_word(struct spi_geni_master *mas)
|
|
{
|
|
/*
|
|
* Calculate how many bytes we'll put in each FIFO word. If the
|
|
* transfer words don't pack cleanly into a FIFO word we'll just put
|
|
* one transfer word in each FIFO word. If they do pack we'll pack 'em.
|
|
*/
|
|
if (mas->fifo_width_bits % mas->cur_bits_per_word)
|
|
return roundup_pow_of_two(DIV_ROUND_UP(mas->cur_bits_per_word,
|
|
BITS_PER_BYTE));
|
|
|
|
return mas->fifo_width_bits / BITS_PER_BYTE;
|
|
}
|
|
|
|
static bool geni_spi_handle_tx(struct spi_geni_master *mas)
|
|
{
|
|
struct geni_se *se = &mas->se;
|
|
unsigned int max_bytes;
|
|
const u8 *tx_buf;
|
|
unsigned int bytes_per_fifo_word = geni_byte_per_fifo_word(mas);
|
|
unsigned int i = 0;
|
|
|
|
max_bytes = (mas->tx_fifo_depth - mas->tx_wm) * bytes_per_fifo_word;
|
|
if (mas->tx_rem_bytes < max_bytes)
|
|
max_bytes = mas->tx_rem_bytes;
|
|
|
|
tx_buf = mas->cur_xfer->tx_buf + mas->cur_xfer->len - mas->tx_rem_bytes;
|
|
while (i < max_bytes) {
|
|
unsigned int j;
|
|
unsigned int bytes_to_write;
|
|
u32 fifo_word = 0;
|
|
u8 *fifo_byte = (u8 *)&fifo_word;
|
|
|
|
bytes_to_write = min(bytes_per_fifo_word, max_bytes - i);
|
|
for (j = 0; j < bytes_to_write; j++)
|
|
fifo_byte[j] = tx_buf[i++];
|
|
iowrite32_rep(se->base + SE_GENI_TX_FIFOn, &fifo_word, 1);
|
|
}
|
|
mas->tx_rem_bytes -= max_bytes;
|
|
if (!mas->tx_rem_bytes) {
|
|
writel(0, se->base + SE_GENI_TX_WATERMARK_REG);
|
|
return false;
|
|
}
|
|
return true;
|
|
}
|
|
|
|
static void geni_spi_handle_rx(struct spi_geni_master *mas)
|
|
{
|
|
struct geni_se *se = &mas->se;
|
|
u32 rx_fifo_status;
|
|
unsigned int rx_bytes;
|
|
unsigned int rx_last_byte_valid;
|
|
u8 *rx_buf;
|
|
unsigned int bytes_per_fifo_word = geni_byte_per_fifo_word(mas);
|
|
unsigned int i = 0;
|
|
|
|
rx_fifo_status = readl(se->base + SE_GENI_RX_FIFO_STATUS);
|
|
rx_bytes = (rx_fifo_status & RX_FIFO_WC_MSK) * bytes_per_fifo_word;
|
|
if (rx_fifo_status & RX_LAST) {
|
|
rx_last_byte_valid = rx_fifo_status & RX_LAST_BYTE_VALID_MSK;
|
|
rx_last_byte_valid >>= RX_LAST_BYTE_VALID_SHFT;
|
|
if (rx_last_byte_valid && rx_last_byte_valid < 4)
|
|
rx_bytes -= bytes_per_fifo_word - rx_last_byte_valid;
|
|
}
|
|
if (mas->rx_rem_bytes < rx_bytes)
|
|
rx_bytes = mas->rx_rem_bytes;
|
|
|
|
rx_buf = mas->cur_xfer->rx_buf + mas->cur_xfer->len - mas->rx_rem_bytes;
|
|
while (i < rx_bytes) {
|
|
u32 fifo_word = 0;
|
|
u8 *fifo_byte = (u8 *)&fifo_word;
|
|
unsigned int bytes_to_read;
|
|
unsigned int j;
|
|
|
|
bytes_to_read = min(bytes_per_fifo_word, rx_bytes - i);
|
|
ioread32_rep(se->base + SE_GENI_RX_FIFOn, &fifo_word, 1);
|
|
for (j = 0; j < bytes_to_read; j++)
|
|
rx_buf[i++] = fifo_byte[j];
|
|
}
|
|
mas->rx_rem_bytes -= rx_bytes;
|
|
}
|
|
|
|
static void setup_fifo_xfer(struct spi_transfer *xfer,
|
|
struct spi_geni_master *mas,
|
|
u16 mode, struct spi_master *spi)
|
|
{
|
|
u32 m_cmd = 0;
|
|
u32 len;
|
|
struct geni_se *se = &mas->se;
|
|
int ret;
|
|
|
|
/*
|
|
* Ensure that our interrupt handler isn't still running from some
|
|
* prior command before we start messing with the hardware behind
|
|
* its back. We don't need to _keep_ the lock here since we're only
|
|
* worried about racing with out interrupt handler. The SPI core
|
|
* already handles making sure that we're not trying to do two
|
|
* transfers at once or setting a chip select and doing a transfer
|
|
* concurrently.
|
|
*
|
|
* NOTE: we actually _can't_ hold the lock here because possibly we
|
|
* might call clk_set_rate() which needs to be able to sleep.
|
|
*/
|
|
spin_lock_irq(&mas->lock);
|
|
spin_unlock_irq(&mas->lock);
|
|
|
|
if (xfer->bits_per_word != mas->cur_bits_per_word) {
|
|
spi_setup_word_len(mas, mode, xfer->bits_per_word);
|
|
mas->cur_bits_per_word = xfer->bits_per_word;
|
|
}
|
|
|
|
/* Speed and bits per word can be overridden per transfer */
|
|
ret = geni_spi_set_clock_and_bw(mas, xfer->speed_hz);
|
|
if (ret)
|
|
return;
|
|
|
|
mas->tx_rem_bytes = 0;
|
|
mas->rx_rem_bytes = 0;
|
|
|
|
if (!(mas->cur_bits_per_word % MIN_WORD_LEN))
|
|
len = xfer->len * BITS_PER_BYTE / mas->cur_bits_per_word;
|
|
else
|
|
len = xfer->len / (mas->cur_bits_per_word / BITS_PER_BYTE + 1);
|
|
len &= TRANS_LEN_MSK;
|
|
|
|
mas->cur_xfer = xfer;
|
|
if (xfer->tx_buf) {
|
|
m_cmd |= SPI_TX_ONLY;
|
|
mas->tx_rem_bytes = xfer->len;
|
|
writel(len, se->base + SE_SPI_TX_TRANS_LEN);
|
|
}
|
|
|
|
if (xfer->rx_buf) {
|
|
m_cmd |= SPI_RX_ONLY;
|
|
writel(len, se->base + SE_SPI_RX_TRANS_LEN);
|
|
mas->rx_rem_bytes = xfer->len;
|
|
}
|
|
|
|
/*
|
|
* Lock around right before we start the transfer since our
|
|
* interrupt could come in at any time now.
|
|
*/
|
|
spin_lock_irq(&mas->lock);
|
|
geni_se_setup_m_cmd(se, m_cmd, FRAGMENTATION);
|
|
|
|
/*
|
|
* TX_WATERMARK_REG should be set after SPI configuration and
|
|
* setting up GENI SE engine, as driver starts data transfer
|
|
* for the watermark interrupt.
|
|
*/
|
|
if (m_cmd & SPI_TX_ONLY) {
|
|
if (geni_spi_handle_tx(mas))
|
|
writel(mas->tx_wm, se->base + SE_GENI_TX_WATERMARK_REG);
|
|
}
|
|
spin_unlock_irq(&mas->lock);
|
|
}
|
|
|
|
static int spi_geni_transfer_one(struct spi_master *spi,
|
|
struct spi_device *slv,
|
|
struct spi_transfer *xfer)
|
|
{
|
|
struct spi_geni_master *mas = spi_master_get_devdata(spi);
|
|
|
|
/* Terminate and return success for 0 byte length transfer */
|
|
if (!xfer->len)
|
|
return 0;
|
|
|
|
setup_fifo_xfer(xfer, mas, slv->mode, spi);
|
|
return 1;
|
|
}
|
|
|
|
static irqreturn_t geni_spi_isr(int irq, void *data)
|
|
{
|
|
struct spi_master *spi = data;
|
|
struct spi_geni_master *mas = spi_master_get_devdata(spi);
|
|
struct geni_se *se = &mas->se;
|
|
u32 m_irq;
|
|
|
|
m_irq = readl(se->base + SE_GENI_M_IRQ_STATUS);
|
|
if (!m_irq)
|
|
return IRQ_NONE;
|
|
|
|
if (m_irq & (M_CMD_OVERRUN_EN | M_ILLEGAL_CMD_EN | M_CMD_FAILURE_EN |
|
|
M_RX_FIFO_RD_ERR_EN | M_RX_FIFO_WR_ERR_EN |
|
|
M_TX_FIFO_RD_ERR_EN | M_TX_FIFO_WR_ERR_EN))
|
|
dev_warn(mas->dev, "Unexpected IRQ err status %#010x\n", m_irq);
|
|
|
|
spin_lock(&mas->lock);
|
|
|
|
if ((m_irq & M_RX_FIFO_WATERMARK_EN) || (m_irq & M_RX_FIFO_LAST_EN))
|
|
geni_spi_handle_rx(mas);
|
|
|
|
if (m_irq & M_TX_FIFO_WATERMARK_EN)
|
|
geni_spi_handle_tx(mas);
|
|
|
|
if (m_irq & M_CMD_DONE_EN) {
|
|
if (mas->cur_xfer) {
|
|
spi_finalize_current_transfer(spi);
|
|
mas->cur_xfer = NULL;
|
|
/*
|
|
* If this happens, then a CMD_DONE came before all the
|
|
* Tx buffer bytes were sent out. This is unusual, log
|
|
* this condition and disable the WM interrupt to
|
|
* prevent the system from stalling due an interrupt
|
|
* storm.
|
|
*
|
|
* If this happens when all Rx bytes haven't been
|
|
* received, log the condition. The only known time
|
|
* this can happen is if bits_per_word != 8 and some
|
|
* registers that expect xfer lengths in num spi_words
|
|
* weren't written correctly.
|
|
*/
|
|
if (mas->tx_rem_bytes) {
|
|
writel(0, se->base + SE_GENI_TX_WATERMARK_REG);
|
|
dev_err(mas->dev, "Premature done. tx_rem = %d bpw%d\n",
|
|
mas->tx_rem_bytes, mas->cur_bits_per_word);
|
|
}
|
|
if (mas->rx_rem_bytes)
|
|
dev_err(mas->dev, "Premature done. rx_rem = %d bpw%d\n",
|
|
mas->rx_rem_bytes, mas->cur_bits_per_word);
|
|
} else {
|
|
complete(&mas->cs_done);
|
|
}
|
|
}
|
|
|
|
if (m_irq & M_CMD_CANCEL_EN)
|
|
complete(&mas->cancel_done);
|
|
if (m_irq & M_CMD_ABORT_EN)
|
|
complete(&mas->abort_done);
|
|
|
|
/*
|
|
* It's safe or a good idea to Ack all of our our interrupts at the
|
|
* end of the function. Specifically:
|
|
* - M_CMD_DONE_EN / M_RX_FIFO_LAST_EN: Edge triggered interrupts and
|
|
* clearing Acks. Clearing at the end relies on nobody else having
|
|
* started a new transfer yet or else we could be clearing _their_
|
|
* done bit, but everyone grabs the spinlock before starting a new
|
|
* transfer.
|
|
* - M_RX_FIFO_WATERMARK_EN / M_TX_FIFO_WATERMARK_EN: These appear
|
|
* to be "latched level" interrupts so it's important to clear them
|
|
* _after_ you've handled the condition and always safe to do so
|
|
* since they'll re-assert if they're still happening.
|
|
*/
|
|
writel(m_irq, se->base + SE_GENI_M_IRQ_CLEAR);
|
|
|
|
spin_unlock(&mas->lock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int spi_geni_probe(struct platform_device *pdev)
|
|
{
|
|
int ret, irq;
|
|
struct spi_master *spi;
|
|
struct spi_geni_master *mas;
|
|
void __iomem *base;
|
|
struct clk *clk;
|
|
struct device *dev = &pdev->dev;
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(base))
|
|
return PTR_ERR(base);
|
|
|
|
clk = devm_clk_get(dev, "se");
|
|
if (IS_ERR(clk))
|
|
return PTR_ERR(clk);
|
|
|
|
spi = spi_alloc_master(dev, sizeof(*mas));
|
|
if (!spi)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, spi);
|
|
mas = spi_master_get_devdata(spi);
|
|
mas->irq = irq;
|
|
mas->dev = dev;
|
|
mas->se.dev = dev;
|
|
mas->se.wrapper = dev_get_drvdata(dev->parent);
|
|
mas->se.base = base;
|
|
mas->se.clk = clk;
|
|
mas->se.opp_table = dev_pm_opp_set_clkname(&pdev->dev, "se");
|
|
if (IS_ERR(mas->se.opp_table))
|
|
return PTR_ERR(mas->se.opp_table);
|
|
/* OPP table is optional */
|
|
ret = dev_pm_opp_of_add_table(&pdev->dev);
|
|
if (ret && ret != -ENODEV) {
|
|
dev_err(&pdev->dev, "invalid OPP table in device tree\n");
|
|
goto put_clkname;
|
|
}
|
|
|
|
spi->bus_num = -1;
|
|
spi->dev.of_node = dev->of_node;
|
|
spi->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LOOP | SPI_CS_HIGH;
|
|
spi->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
|
|
spi->num_chipselect = 4;
|
|
spi->max_speed_hz = 50000000;
|
|
spi->prepare_message = spi_geni_prepare_message;
|
|
spi->transfer_one = spi_geni_transfer_one;
|
|
spi->auto_runtime_pm = true;
|
|
spi->handle_err = handle_fifo_timeout;
|
|
spi->set_cs = spi_geni_set_cs;
|
|
|
|
init_completion(&mas->cs_done);
|
|
init_completion(&mas->cancel_done);
|
|
init_completion(&mas->abort_done);
|
|
spin_lock_init(&mas->lock);
|
|
pm_runtime_use_autosuspend(&pdev->dev);
|
|
pm_runtime_set_autosuspend_delay(&pdev->dev, 250);
|
|
pm_runtime_enable(dev);
|
|
|
|
ret = geni_icc_get(&mas->se, NULL);
|
|
if (ret)
|
|
goto spi_geni_probe_runtime_disable;
|
|
/* Set the bus quota to a reasonable value for register access */
|
|
mas->se.icc_paths[GENI_TO_CORE].avg_bw = Bps_to_icc(CORE_2X_50_MHZ);
|
|
mas->se.icc_paths[CPU_TO_GENI].avg_bw = GENI_DEFAULT_BW;
|
|
|
|
ret = geni_icc_set_bw(&mas->se);
|
|
if (ret)
|
|
goto spi_geni_probe_runtime_disable;
|
|
|
|
ret = spi_geni_init(mas);
|
|
if (ret)
|
|
goto spi_geni_probe_runtime_disable;
|
|
|
|
ret = request_irq(mas->irq, geni_spi_isr, 0, dev_name(dev), spi);
|
|
if (ret)
|
|
goto spi_geni_probe_runtime_disable;
|
|
|
|
ret = spi_register_master(spi);
|
|
if (ret)
|
|
goto spi_geni_probe_free_irq;
|
|
|
|
return 0;
|
|
spi_geni_probe_free_irq:
|
|
free_irq(mas->irq, spi);
|
|
spi_geni_probe_runtime_disable:
|
|
pm_runtime_disable(dev);
|
|
spi_master_put(spi);
|
|
dev_pm_opp_of_remove_table(&pdev->dev);
|
|
put_clkname:
|
|
dev_pm_opp_put_clkname(mas->se.opp_table);
|
|
return ret;
|
|
}
|
|
|
|
static int spi_geni_remove(struct platform_device *pdev)
|
|
{
|
|
struct spi_master *spi = platform_get_drvdata(pdev);
|
|
struct spi_geni_master *mas = spi_master_get_devdata(spi);
|
|
|
|
/* Unregister _before_ disabling pm_runtime() so we stop transfers */
|
|
spi_unregister_master(spi);
|
|
|
|
free_irq(mas->irq, spi);
|
|
pm_runtime_disable(&pdev->dev);
|
|
dev_pm_opp_of_remove_table(&pdev->dev);
|
|
dev_pm_opp_put_clkname(mas->se.opp_table);
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused spi_geni_runtime_suspend(struct device *dev)
|
|
{
|
|
struct spi_master *spi = dev_get_drvdata(dev);
|
|
struct spi_geni_master *mas = spi_master_get_devdata(spi);
|
|
int ret;
|
|
|
|
/* Drop the performance state vote */
|
|
dev_pm_opp_set_rate(dev, 0);
|
|
|
|
ret = geni_se_resources_off(&mas->se);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return geni_icc_disable(&mas->se);
|
|
}
|
|
|
|
static int __maybe_unused spi_geni_runtime_resume(struct device *dev)
|
|
{
|
|
struct spi_master *spi = dev_get_drvdata(dev);
|
|
struct spi_geni_master *mas = spi_master_get_devdata(spi);
|
|
int ret;
|
|
|
|
ret = geni_icc_enable(&mas->se);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = geni_se_resources_on(&mas->se);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return dev_pm_opp_set_rate(mas->dev, mas->cur_sclk_hz);
|
|
}
|
|
|
|
static int __maybe_unused spi_geni_suspend(struct device *dev)
|
|
{
|
|
struct spi_master *spi = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
ret = spi_master_suspend(spi);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = pm_runtime_force_suspend(dev);
|
|
if (ret)
|
|
spi_master_resume(spi);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __maybe_unused spi_geni_resume(struct device *dev)
|
|
{
|
|
struct spi_master *spi = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
ret = pm_runtime_force_resume(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = spi_master_resume(spi);
|
|
if (ret)
|
|
pm_runtime_force_suspend(dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct dev_pm_ops spi_geni_pm_ops = {
|
|
SET_RUNTIME_PM_OPS(spi_geni_runtime_suspend,
|
|
spi_geni_runtime_resume, NULL)
|
|
SET_SYSTEM_SLEEP_PM_OPS(spi_geni_suspend, spi_geni_resume)
|
|
};
|
|
|
|
static const struct of_device_id spi_geni_dt_match[] = {
|
|
{ .compatible = "qcom,geni-spi" },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, spi_geni_dt_match);
|
|
|
|
static struct platform_driver spi_geni_driver = {
|
|
.probe = spi_geni_probe,
|
|
.remove = spi_geni_remove,
|
|
.driver = {
|
|
.name = "geni_spi",
|
|
.pm = &spi_geni_pm_ops,
|
|
.of_match_table = spi_geni_dt_match,
|
|
},
|
|
};
|
|
module_platform_driver(spi_geni_driver);
|
|
|
|
MODULE_DESCRIPTION("SPI driver for GENI based QUP cores");
|
|
MODULE_LICENSE("GPL v2");
|