linux/drivers/usb
Alan Stern c4f3476436 USB: EHCI: fix up locking
This patch (as1588) adjusts the locking in ehci-hcd's various halt,
shutdown, and suspend/resume pathways.  We want to hold the spinlock
while writing device registers and accessing shared variables, but not
while polling in a loop.

In addition, there's no need to call ehci_work() at times when no URBs
can be active, i.e., in ehci_stop() and ehci_bus_suspend().

Finally, ehci_adjust_port_wakeup_flags() is called only in situations
where interrupts are enabled; therefore it can use spin_lock_irq
rather than spin_lock_irqsave.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-16 16:56:48 -07:00
..
atm USB: xusbatm.c: remove dbg() usage 2012-05-01 21:33:30 -07:00
c67x00 usb: convert drivers/usb/* to use module_platform_driver() 2011-11-28 06:48:32 +09:00
chipidea usb: chipidea: add imx platform driver 2012-07-09 10:01:09 -07:00
class Merge 3.5-rc7 into usb-next 2012-07-16 13:16:09 -07:00
core Merge 3.5-rc7 into usb-next 2012-07-16 13:16:09 -07:00
dwc3 usb: dwc3: patches for v3.6 merge window 2012-07-05 15:15:38 -07:00
early usb: early: fixed coding style issue related to : operator 2012-06-13 16:07:22 -07:00
gadget usb: phy: patches for v3.6 merge window 2012-07-05 15:35:41 -07:00
host USB: EHCI: fix up locking 2012-07-16 16:56:48 -07:00
image USB: mdc800.c: remove dbg() usage 2012-05-01 21:33:50 -07:00
misc USB: yurex.c: remove dbg() usage 2012-05-01 21:34:11 -07:00
mon usb: Add export.h for EXPORT_SYMBOL/THIS_MODULE where needed 2011-10-31 19:31:25 -04:00
musb usb: phy: patches for v3.6 merge window 2012-07-05 15:35:41 -07:00
otg usb: otg: add basic mxs phy driver support 2012-07-09 09:59:23 -07:00
phy usb: phy: Fix Kconfig dependency for Phy drivers 2012-06-26 16:14:33 -07:00
renesas_usbhs usb: renesas_usbhs: use dmaengine helper functions 2012-07-09 09:48:26 -07:00
serial Merge 3.5-rc7 into usb-next 2012-07-16 13:16:09 -07:00
storage usb: storage: update usb devices for write cache quirk in quirk list. 2012-07-16 16:46:22 -07:00
wusbcore uwb & wusb: fix kconfig error 2012-01-26 11:22:42 -08:00
Kconfig usb: move ci13xxx and related code to drivers/usb/chipidea 2012-05-11 16:45:30 -07:00
Makefile usb: phy: Fix Kconfig dependency for Phy drivers 2012-06-26 16:14:33 -07:00
README
usb-common.c
usb-skeleton.c USB: usb-skeleton.c: remove err() usage 2012-04-27 11:24:45 -07:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.