iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/drivers/ata
History
Daniel J Blueman c531077f40 [libata] Prevent interface errors with Seagate FreeAgent GoFlex 
When using my Seagate FreeAgent GoFlex eSATAp external disk enclosure,
interface errors are always seen until 1.5Gbps is negotiated [1]. This
occurs using any disk in the enclosure, and when the disk is connected
directly with a generic passive eSATAp cable, we see stable 3Gbps
operation as expected.

Blacklist 3Gbps mode to avoid dataloss and the ~30s delay bus reset
and renegotiation incurs.

Signed-off-by: Daniel J Blueman <daniel@quora.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25 14:34:42 -04:00
..
acard-ahci.c
ata: Add and use ata_print_version_once
2011-07-23 17:57:36 -04:00
ahci_platform.c
ata: ahci_platform: Add synopsys ahci controller in DT's compatible list
2012-05-03 14:08:53 -04:00
ahci.c
ahci: Detect Marvell 88SE9172 SATA controller
2012-05-03 14:07:40 -04:00
ahci.h
ahci: move AHCI_HFLAGS() macro to ahci.h
2012-03-13 16:35:47 -04:00
ata_generic.c
ata_generic: Skip is_intel_ider() check when ata_generic=1 is set
2012-05-22 15:54:13 -04:00
ata_piix.c
ata_piix: defer disks to the Hyper-V drivers by default
2012-05-07 15:32:58 -04:00
Kconfig
PATA host controller driver for ep93xx
2012-05-22 16:02:34 -04:00
libahci.c
ahci: add AHCI_HFLAG_DELAY_ENGINE host flag
2012-03-13 16:35:37 -04:00
libata-acpi.c
libata: tell scsi layer device supports runtime power off
2012-06-29 11:38:45 -04:00
libata-core.c
[libata] Prevent interface errors with Seagate FreeAgent GoFlex
2012-07-25 14:34:42 -04:00
libata-eh.c
libata-eh don't waste time retrying media errors (v3)
2012-05-07 15:40:34 -04:00
libata-pmp.c
libata: migrate ACPI code over to new bindings
2012-06-29 11:38:11 -04:00
libata-scsi.c
libata-acpi: add ata port runtime D3Cold support
2012-06-29 11:38:13 -04:00
libata-sff.c
ata: remove the second argument of k[un]map_atomic()
2012-03-20 21:48:16 +08:00
libata-transport.c
libata: forbid port runtime pm by default, fixing regression
2012-04-18 14:33:25 -04:00
libata-transport.h
[libata] Add ATA transport class
2010-10-21 20:21:03 -04:00
libata.h
libata-acpi: add missing inlines in libata.h
2012-07-25 14:15:03 -04:00
Makefile
PATA host controller driver for ep93xx
2012-05-22 16:02:34 -04:00
pata_acpi.c
libata: migrate ACPI code over to new bindings
2012-06-29 11:38:11 -04:00
pata_ali.c
pata_ali: fix "Satelite" typo
2011-10-14 13:10:42 -04:00
pata_amd.c
ata: Add and use ata_print_version_once
2011-07-23 17:57:36 -04:00
pata_arasan_cf.c
Viresh has moved
2012-06-20 14:39:36 -07:00
pata_artop.c
pata_artop: add Power Management support
2011-10-14 13:32:54 -04:00
pata_at32.c
libata: remove ATA_FLAG_MMIO
2011-03-02 02:36:46 -05:00
pata_at91.c
pata/at91: use newly introduced SMC accessors
2012-02-13 18:31:37 +01:00
pata_atiixp.c
pata_atiixp: add proper ->prereset method
2011-10-14 13:16:49 -04:00
pata_atp867x.c
ata: Add and use ata_print_version_once
2011-07-23 17:57:36 -04:00
pata_bf54x.c
[libata] pata_bf54x: Support sg list in bmdma transfer.
2012-01-17 20:49:28 -05:00
pata_cmd64x.c
pata_cmd64x: implement sff_irq_check() method
2012-03-13 16:43:11 -04:00
pata_cmd640.c
pata_cmd640: implement sff_irq_check() method
2010-10-21 20:21:05 -04:00
pata_cs5520.c
ata: Convert dev_printk(KERN_<LEVEL> to dev_<level>(
2011-07-23 17:57:36 -04:00
pata_cs5530.c
libata-sff: separate out BMDMA init
2010-05-25 19:40:30 -04:00
pata_cs5535.c
pata_cs5535: no need to program PIO0 timings during device init
2011-10-14 13:08:05 -04:00
pata_cs5536.c
pata_cs5536: forward port changes from cs5536
2012-01-08 19:14:58 -05:00
pata_cypress.c
libata-sff: separate out BMDMA init
2010-05-25 19:40:30 -04:00
pata_efar.c
pata_efar: fix register naming used in efar_set_piomode()
2011-10-14 13:38:40 -04:00
pata_ep93xx.c
PATA host controller driver for ep93xx
2012-05-22 16:02:34 -04:00
pata_hpt3x2n.c
ata: pata: Convert pr_*(DRV_NAME ...) to pr_fmt/pr_<level>
2011-03-14 02:56:31 -04:00
pata_hpt3x3.c
ata: Add and use ata_print_version_once
2011-07-23 17:57:36 -04:00
pata_hpt37x.c
ata: pata: Convert pr_*(DRV_NAME ...) to pr_fmt/pr_<level>
2011-03-14 02:56:31 -04:00
pata_hpt366.c
pata_hpt366: add hpt36x_find_mode() helper
2011-10-14 13:07:18 -04:00
pata_icside.c
ata: Convert ata_<foo>_printk(KERN_<LEVEL> to ata_<foo>_<level>
2011-07-23 17:57:36 -04:00
pata_imx.c
SATA/PATA: convert drivers/ata/* to use module_platform_driver()
2012-01-08 19:14:58 -05:00
pata_isapnp.c
[libata] Improve timeout handling
2009-03-24 22:52:39 -04:00
pata_it821x.c
pata_it821x: Fix RAID type display, by adding missing comma
2011-07-23 18:04:25 -04:00
pata_it8213.c
pata_it8213: fix register naming used in it8213_set_piomode()
2011-10-14 13:25:17 -04:00
pata_ixp4xx_cf.c
SATA/PATA: convert drivers/ata/* to use module_platform_driver()
2012-01-08 19:14:58 -05:00
pata_jmicron.c
libata-sff: separate out BMDMA init
2010-05-25 19:40:30 -04:00
pata_legacy.c
pata_legacy: correctly mask recovery field for HT6560B
2012-03-13 12:43:13 -04:00
pata_macio.c
ata: Convert ata_<foo>_printk(KERN_<LEVEL> to ata_<foo>_<level>
2011-07-23 17:57:36 -04:00
pata_marvell.c
pata_marvell: Add support for 88SE91A0, 88SE91A4
2011-06-24 02:07:35 -04:00
pata_mpc52xx.c
drivers/ata/pata_mpc52xx.c: clean up error handling code
2012-03-13 16:41:08 -04:00
pata_mpiix.c
ata: Add and use ata_print_version_once
2011-07-23 17:57:36 -04:00
pata_netcell.c
ata: Add and use ata_print_version_once
2011-07-23 17:57:36 -04:00
pata_ninja32.c
[libata] trivial: trim trailing whitespace for drivers/ata/*.[ch]
2011-03-02 02:36:45 -05:00
pata_ns87410.c
ata: Convert dev_printk(KERN_<LEVEL> to dev_<level>(
2011-07-23 17:57:36 -04:00
pata_ns87415.c
ata: Add and use ata_print_version_once
2011-07-23 17:57:36 -04:00
pata_octeon_cf.c
ata: Add and use ata_print_version_once
2011-07-23 17:57:36 -04:00
pata_of_platform.c
pata_of_platform: remove direct dependency on OF_IRQ
2012-01-08 19:14:58 -05:00
pata_oldpiix.c
ata: Add and use ata_print_version_once
2011-07-23 17:57:36 -04:00
pata_opti.c
ata: Add and use ata_print_version_once
2011-07-23 17:57:36 -04:00
pata_optidma.c
ata: Add and use ata_print_version_once
2011-07-23 17:57:36 -04:00
pata_palmld.c
SATA/PATA: convert drivers/ata/* to use module_platform_driver()
2012-01-08 19:14:58 -05:00
pata_pcmcia.c
ata: Convert ata_<foo>_printk(KERN_<LEVEL> to ata_<foo>_<level>
2011-07-23 17:57:36 -04:00
pata_pdc202xx_old.c
pata_pdc202xx_old: implement sff_irq_check() method
2010-10-21 20:21:06 -04:00
pata_pdc2027x.c
pata_pdc2027x: add Power Management support
2011-10-14 13:32:52 -04:00
pata_piccolo.c
libata-sff: separate out BMDMA init
2010-05-25 19:40:30 -04:00
pata_platform.c
SATA/PATA: convert drivers/ata/* to use module_platform_driver()
2012-01-08 19:14:58 -05:00
pata_pxa.c
SATA/PATA: convert drivers/ata/* to use module_platform_driver()
2012-01-08 19:14:58 -05:00
pata_radisys.c
ata: Add and use ata_print_version_once
2011-07-23 17:57:36 -04:00
pata_rb532_cf.c
SATA/PATA: convert drivers/ata/* to use module_platform_driver()
2012-01-08 19:14:58 -05:00
pata_rdc.c
pata_rdc: add Power Management support
2011-10-14 13:38:36 -04:00
pata_rz1000.c
ata: Add and use ata_print_version_once
2011-07-23 17:57:36 -04:00
pata_samsung_cf.c
ata: Convert ata_<foo>_printk(KERN_<LEVEL> to ata_<foo>_<level>
2011-07-23 17:57:36 -04:00
pata_sc1200.c
pata_sc1200: do not use c99 style comments
2011-10-14 13:01:42 -04:00
pata_scc.c
pata_scc: add proper cable detection method
2011-10-14 13:19:51 -04:00
pata_sch.c
ata: Add and use ata_print_version_once
2011-07-23 17:57:36 -04:00
pata_serverworks.c
pata_serverworks: add serverworks_fixup()
2011-10-14 13:16:35 -04:00
pata_sil680.c
pata_sil680: minor CodingStyle fixups
2011-10-14 12:46:45 -04:00
pata_sis.c
pata_sis: code style cleanups for consistency
2011-10-08 00:07:16 -04:00
pata_sl82c105.c
pata_sl82c105: add Power Management support
2011-10-14 13:32:53 -04:00
pata_triflex.c
ata: Add and use ata_print_version_once
2011-07-23 17:57:36 -04:00
pata_via.c
pata_via: add via_fixup()
2011-10-14 13:22:54 -04:00
pdc_adma.c
ata: Add and use ata_print_version_once
2011-07-23 17:57:36 -04:00
sata_dwc_460ex.c
SATA/PATA: convert drivers/ata/* to use module_platform_driver()
2012-01-08 19:14:58 -05:00
sata_fsl.c
sata_fsl: add support for interrupt coalsecing feature
2012-03-13 12:43:13 -04:00
sata_inic162x.c
ata: Add and use ata_print_version_once
2011-07-23 17:57:36 -04:00
sata_mv.c
ARM: Orion: SATA: Add per channel clk/clkdev support.
2012-05-08 16:33:58 -07:00
sata_nv.c
module_param: make bool parameters really bool (drivers & misc)
2012-01-13 09:32:20 +10:30
sata_promise.c
ata: Add and use ata_print_version_once
2011-07-23 17:57:36 -04:00
sata_promise.h
libata annotations and fixes
2008-01-23 05:24:15 -05:00
sata_qstor.c
ata: Add and use ata_print_version_once
2011-07-23 17:57:36 -04:00
sata_sil24.c
module_param: make bool parameters really bool (drivers & misc)
2012-01-13 09:32:20 +10:30
sata_sil.c
[libata] sata_sil: fix used-uninit warning
2011-08-18 23:52:36 -04:00
sata_sis.c
sata_sis.c: trivial spelling fix
2011-11-09 01:36:49 -05:00
sata_svw.c
ata: Add and use ata_print_version_once
2011-07-23 17:57:36 -04:00
sata_sx4.c
ata: Add and use ata_print_version_once
2011-07-23 17:57:36 -04:00
sata_uli.c
ata: Add and use ata_print_version_once
2011-07-23 17:57:36 -04:00
sata_via.c
ata: sata_via: Use dev_dbg
2011-07-23 17:57:36 -04:00
sata_vsc.c
ata: Add and use ata_print_version_once
2011-07-23 17:57:36 -04:00
sis.h
libata: PATA-mode fixes for sis_sata
2007-07-02 10:17:42 -04:00