42a7f53ba0
The ahci_platform driver supports "snps,dwc-ahci". Add this to the DT binding information. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
37 lines
1.2 KiB
Plaintext
37 lines
1.2 KiB
Plaintext
* AHCI SATA Controller
|
|
|
|
SATA nodes are defined to describe on-chip Serial ATA controllers.
|
|
Each SATA controller should have its own node.
|
|
|
|
Required properties:
|
|
- compatible : compatible list, one of "snps,spear-ahci",
|
|
"snps,exynos5440-ahci", "ibm,476gtr-ahci",
|
|
"allwinner,sun4i-a10-ahci", "fsl,imx53-ahci"
|
|
"fsl,imx6q-ahci" or "snps,dwc-ahci"
|
|
- interrupts : <interrupt mapping for SATA IRQ>
|
|
- reg : <registers mapping>
|
|
|
|
Optional properties:
|
|
- dma-coherent : Present if dma operations are coherent
|
|
- clocks : a list of phandle + clock specifier pairs
|
|
- target-supply : regulator for SATA target power
|
|
|
|
"fsl,imx53-ahci", "fsl,imx6q-ahci" required properties:
|
|
- clocks : must contain the sata, sata_ref and ahb clocks
|
|
- clock-names : must contain "ahb" for the ahb clock
|
|
|
|
Examples:
|
|
sata@ffe08000 {
|
|
compatible = "snps,spear-ahci";
|
|
reg = <0xffe08000 0x1000>;
|
|
interrupts = <115>;
|
|
};
|
|
|
|
ahci: sata@01c18000 {
|
|
compatible = "allwinner,sun4i-a10-ahci";
|
|
reg = <0x01c18000 0x1000>;
|
|
interrupts = <56>;
|
|
clocks = <&pll6 0>, <&ahb_gates 25>;
|
|
target-supply = <®_ahci_5v>;
|
|
};
|