Arnd Bergmann c872f6ce22 i.MX fixes for 6.1:
- Fix imx93-pd driver to release resources when error occurs in probe.
 - A series from Ioana Ciornei to add missing clock frequencies for MDIO
   controllers on LayerScape SoCs, so that the kernel driver can work
   independently from bootloader.
 - A series from Li Jun to fix USB power domain setup in i.MX8MM/N device
   trees.
 - Fix CPLD_Dn pull configuration for MX8Menlo board to avoid interfering
   with CPLD power off functionality.
 - Fix ctrl_sleep_moci GPIO setup for verdin-imx8mp board.
 - Fix DT schema check warnings on uSDHC clocks for imx8-ss-conn device
   tree.
 - Fix up gpcv2 DT bindings to have an optional `power-domains` property.
 - A couple of i.MX93 device tree fixes on S4MU interrupt and gpio-ranges
   of GPIO controllers.
 - Keep PU regulator on for Quad and QuadPlus based imx6dl-yapp4 boards to
   work around a hardware design flaw in supply voltage distribution.
 - Fix user push-button GPIO offset on imx6qdl-gw59 boards.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmNgjiEUHHNoYXduZ3Vv
 QGtlcm5lbC5vcmcACgkQUFdYWoewfM4anAgAmZ5lSvXKhlaYijN7DSh9WlpwDcf1
 BRGAoT94d2C0rv1+lPKaEcSCJAo7/jqiMUgNorUVhlwR9frJIJK9HvNkfzJ66vQ9
 DRksUZjomlIuefaOWdja18ZZD6WuPoe95pjW2ssB/A2zAmKYxtSoqiHsPfnzRtp1
 yaBa1DyKBodVp+Eo0HT9Cyg1gBbPaHDex4D/v852UaBQ3J297phykeFrL/FjwsZT
 ojAlK30sEb5LOBvcBnQxus1f0EhaB+sjapAsNMX0vaEkx49zO+fOEDa2I/vBXbA8
 NF/jOf87pl9QeYkVDGKlP4EtTbXKObsVOfSFc05C1gT68FUGUbGF2pX/3g==
 =YELK
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmNhAQoACgkQmmx57+YA
 GNknHQ/9ENt7IOQmPPYPF+9jsEE6YtlzPSO40hdbgTcQM94qFN2mQUYRTf9kBzr+
 Gaeot/CE9cZEj5ZlN0qSUK/NWsIfHNiMmCMCTrEB9hqjJqyKfPrWjUD2CaAnORii
 za1Qma7IBrSc0wfiNNx0ZIiWeJluPYw5iw9BgF7HlHOYd81Rs6ZAxDjT0nwa81NN
 DjzpIswc7dFQSJU6mgJ20tEPvthZBRRlDnI4zdzr84hVovizCMF6UfM3K+XfM5Tb
 lJMuLC1w3uCVqS6v3+MpZJABg3qFZwB7TqRI+fS/W+R+w21EGkhzpo8OqqpSULYJ
 4HHrd4Gw1QItue8dVqbqNSTBJNo0lpUvcFKOoNPh0kUuUwRgoxOWKE+EowLpqaNO
 6Judyy4KWTTBv3YyBSF0AVEy/wuQDsv4wj//cttHOrWZKcEnF3t9EiKEBzu0f7b9
 u4dVVw6aOlF/bv7CoOXwhUK79Dm2XOV6NseXKGPGkCdWZNg+bwojKjDIy80sjL7i
 3YR0ggDCb5rN+eioKp04l//qaKbw6cr8FtW7AjfXASfqgHojcyh8UXu0PIuMKRNW
 jod9rP2HFKV8+gLVl/Ax4T9GWyKAbBtogzR+J+77MZXZ5+hbZa4e7CEtHy3feHzC
 d52+kjPqOLiW8CfhgNbTYeWkNhz+qSF1ea8I7AjpyUurWNtlVf4=
 =W2eO
 -----END PGP SIGNATURE-----

Merge tag 'imx-fixes-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 6.1:

- Fix imx93-pd driver to release resources when error occurs in probe.
- A series from Ioana Ciornei to add missing clock frequencies for MDIO
  controllers on LayerScape SoCs, so that the kernel driver can work
  independently from bootloader.
- A series from Li Jun to fix USB power domain setup in i.MX8MM/N device
  trees.
- Fix CPLD_Dn pull configuration for MX8Menlo board to avoid interfering
  with CPLD power off functionality.
- Fix ctrl_sleep_moci GPIO setup for verdin-imx8mp board.
- Fix DT schema check warnings on uSDHC clocks for imx8-ss-conn device
  tree.
- Fix up gpcv2 DT bindings to have an optional `power-domains` property.
- A couple of i.MX93 device tree fixes on S4MU interrupt and gpio-ranges
  of GPIO controllers.
- Keep PU regulator on for Quad and QuadPlus based imx6dl-yapp4 boards to
  work around a hardware design flaw in supply voltage distribution.
- Fix user push-button GPIO offset on imx6qdl-gw59 boards.

* tag 'imx-fixes-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: ls208xa: specify clock frequencies for the MDIO controllers
  arm64: dts: ls1088a: specify clock frequencies for the MDIO controllers
  arm64: dts: lx2160a: specify clock frequencies for the MDIO controllers
  soc: imx: imx93-pd: Fix the error handling path of imx93_pd_probe()
  arm64: dts: imx93: correct gpio-ranges
  arm64: dts: imx93: correct s4mu interrupt names
  dt-bindings: power: gpcv2: add power-domains property
  arm64: dts: imx8: correct clock order
  ARM: dts: imx6dl-yapp4: Do not allow PM to switch PU regulator off on Q/QP
  ARM: dts: imx6qdl-gw59{10,13}: fix user pushbutton GPIO offset
  arm64: dts: imx8mn: Correct the usb power domain
  arm64: dts: imx8mn: remove otg1 power domain dependency on hsio
  arm64: dts: imx8mm: correct usb power domains
  arm64: dts: imx8mm: remove otg1/2 power domain dependency on hsio
  arm64: dts: verdin-imx8mp: fix ctrl_sleep_moci
  arm64: dts: imx8mm: Enable CPLD_Dn pull down resistor on MX8Menlo

Link: https://lore.kernel.org/r/20221101031547.GB125525@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-01 12:20:41 +01:00
2022-11-01 12:20:41 +01:00
2022-10-21 15:14:14 -07:00
2022-11-01 12:20:41 +01:00
2022-11-01 12:20:41 +01:00
2022-10-21 18:02:36 -07:00
2022-10-23 15:00:43 -07:00
2022-10-23 09:55:50 -07:00
2022-09-28 09:02:20 +02:00
2022-10-12 14:46:48 -07:00
2022-10-16 11:12:22 -07:00
2022-10-14 13:22:14 -07:00
2022-10-23 15:00:43 -07:00
2022-09-28 09:02:20 +02:00
2022-10-20 21:27:21 -07:00
2022-09-28 09:02:20 +02:00
2022-08-03 19:52:08 -07:00
2022-10-10 12:00:45 -07:00
2022-10-23 15:27:33 -07:00

Linux kernel
============

There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.

In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``.  The formatted documentation can also be read online at:

    https://www.kernel.org/doc/html/latest/

There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.

Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.
Description
No description provided
Readme 5.7 GiB
Languages
C 97.6%
Assembly 1%
Shell 0.5%
Python 0.3%
Makefile 0.3%