f73659192b
The DLCI driver (dlci.c) implements the Frame Relay protocol. However,
we already have another newer and better implementation of Frame Relay
provided by the HDLC_FR driver (hdlc_fr.c).
The DLCI driver's implementation of Frame Relay is used by only one
hardware driver in the kernel - the SDLA driver (sdla.c).
The SDLA driver provides Frame Relay support for the Sangoma S50x devices.
However, the vendor provides their own driver (along with their own
multi-WAN-protocol implementations including Frame Relay), called WANPIPE.
I believe most users of the hardware would use the vendor-provided WANPIPE
driver instead.
(The WANPIPE driver was even once in the kernel, but was deleted in
commit 8db60bcf30 ("[WAN]: Remove broken and unmaintained Sangoma
drivers.") because the vendor no longer updated the in-kernel WANPIPE
driver.)
Cc: Mike McLagan <mike.mclagan@linux.org>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Link: https://lore.kernel.org/r/20201114150921.685594-1-xie.he.0141@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
67 lines
1.9 KiB
Makefile
67 lines
1.9 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0
|
|
#
|
|
# Makefile for the Linux network (wan) device drivers.
|
|
#
|
|
# 3 Aug 2000, Christoph Hellwig <hch@infradead.org>
|
|
# Rewritten to use lists instead of if-statements.
|
|
#
|
|
|
|
obj-$(CONFIG_HDLC) += hdlc.o
|
|
obj-$(CONFIG_HDLC_RAW) += hdlc_raw.o
|
|
obj-$(CONFIG_HDLC_RAW_ETH) += hdlc_raw_eth.o
|
|
obj-$(CONFIG_HDLC_CISCO) += hdlc_cisco.o
|
|
obj-$(CONFIG_HDLC_FR) += hdlc_fr.o
|
|
obj-$(CONFIG_HDLC_PPP) += hdlc_ppp.o
|
|
obj-$(CONFIG_HDLC_X25) += hdlc_x25.o
|
|
|
|
obj-$(CONFIG_HOSTESS_SV11) += z85230.o hostess_sv11.o
|
|
obj-$(CONFIG_SEALEVEL_4021) += z85230.o sealevel.o
|
|
obj-$(CONFIG_COSA) += cosa.o
|
|
obj-$(CONFIG_FARSYNC) += farsync.o
|
|
|
|
obj-$(CONFIG_LANMEDIA) += lmc/
|
|
|
|
obj-$(CONFIG_LAPBETHER) += lapbether.o
|
|
obj-$(CONFIG_SBNI) += sbni.o
|
|
obj-$(CONFIG_N2) += n2.o
|
|
obj-$(CONFIG_C101) += c101.o
|
|
obj-$(CONFIG_WANXL) += wanxl.o
|
|
obj-$(CONFIG_PCI200SYN) += pci200syn.o
|
|
obj-$(CONFIG_PC300TOO) += pc300too.o
|
|
obj-$(CONFIG_IXP4XX_HSS) += ixp4xx_hss.o
|
|
obj-$(CONFIG_FSL_UCC_HDLC) += fsl_ucc_hdlc.o
|
|
obj-$(CONFIG_SLIC_DS26522) += slic_ds26522.o
|
|
|
|
clean-files := wanxlfw.inc
|
|
$(obj)/wanxl.o: $(obj)/wanxlfw.inc
|
|
|
|
ifeq ($(CONFIG_WANXL_BUILD_FIRMWARE),y)
|
|
ifeq ($(ARCH),m68k)
|
|
M68KCC = $(CC)
|
|
M68KLD = $(LD)
|
|
else
|
|
M68KCC = $(CROSS_COMPILE_M68K)gcc
|
|
M68KLD = $(CROSS_COMPILE_M68K)ld
|
|
endif
|
|
|
|
quiet_cmd_build_wanxlfw = BLDFW $@
|
|
cmd_build_wanxlfw = hexdump -ve '"\n" 16/1 "0x%02X,"' $< | \
|
|
sed 's/0x ,//g;1s/^/static const u8 firmware[]={/;$$s/,$$/\n};\n/' > $@
|
|
|
|
$(obj)/wanxlfw.inc: $(obj)/wanxlfw.bin FORCE
|
|
$(call if_changed,build_wanxlfw)
|
|
|
|
quiet_cmd_m68kld_bin_o = M68KLD $@
|
|
cmd_m68kld_bin_o = $(M68KLD) --oformat binary -Ttext 0x1000 $< -o $@
|
|
|
|
$(obj)/wanxlfw.bin: $(obj)/wanxlfw.o FORCE
|
|
$(call if_changed,m68kld_bin_o)
|
|
|
|
quiet_cmd_m68kas_o_S = M68KAS $@
|
|
cmd_m68kas_o_S = $(M68KCC) -D__ASSEMBLY__ -Wp,-MD,$(depfile) -I$(srctree)/include/uapi -c -o $@ $<
|
|
|
|
$(obj)/wanxlfw.o: $(src)/wanxlfw.S FORCE
|
|
$(call if_changed_dep,m68kas_o_S)
|
|
endif
|
|
targets += wanxlfw.inc wanxlfw.bin wanxlfw.o
|