ed5c2f5fd1
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
385 lines
9.2 KiB
C
385 lines
9.2 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
// I2C interface for ChromeOS Embedded Controller
|
|
//
|
|
// Copyright (C) 2012 Google, Inc
|
|
|
|
#include <linux/acpi.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_data/cros_ec_commands.h>
|
|
#include <linux/platform_data/cros_ec_proto.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "cros_ec.h"
|
|
|
|
/*
|
|
* Request format for protocol v3
|
|
* byte 0 0xda (EC_COMMAND_PROTOCOL_3)
|
|
* byte 1-8 struct ec_host_request
|
|
* byte 10- response data
|
|
*/
|
|
struct ec_host_request_i2c {
|
|
/* Always 0xda to backward compatible with v2 struct */
|
|
uint8_t command_protocol;
|
|
struct ec_host_request ec_request;
|
|
} __packed;
|
|
|
|
|
|
/*
|
|
* Response format for protocol v3
|
|
* byte 0 result code
|
|
* byte 1 packet_length
|
|
* byte 2-9 struct ec_host_response
|
|
* byte 10- response data
|
|
*/
|
|
struct ec_host_response_i2c {
|
|
uint8_t result;
|
|
uint8_t packet_length;
|
|
struct ec_host_response ec_response;
|
|
} __packed;
|
|
|
|
static inline struct cros_ec_device *to_ec_dev(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
|
|
return i2c_get_clientdata(client);
|
|
}
|
|
|
|
static int cros_ec_pkt_xfer_i2c(struct cros_ec_device *ec_dev,
|
|
struct cros_ec_command *msg)
|
|
{
|
|
struct i2c_client *client = ec_dev->priv;
|
|
int ret = -ENOMEM;
|
|
int i;
|
|
int packet_len;
|
|
u8 *out_buf = NULL;
|
|
u8 *in_buf = NULL;
|
|
u8 sum;
|
|
struct i2c_msg i2c_msg[2];
|
|
struct ec_host_response *ec_response;
|
|
struct ec_host_request_i2c *ec_request_i2c;
|
|
struct ec_host_response_i2c *ec_response_i2c;
|
|
int request_header_size = sizeof(struct ec_host_request_i2c);
|
|
int response_header_size = sizeof(struct ec_host_response_i2c);
|
|
|
|
i2c_msg[0].addr = client->addr;
|
|
i2c_msg[0].flags = 0;
|
|
i2c_msg[1].addr = client->addr;
|
|
i2c_msg[1].flags = I2C_M_RD;
|
|
|
|
packet_len = msg->insize + response_header_size;
|
|
if (packet_len > ec_dev->din_size) {
|
|
ret = -EINVAL;
|
|
goto done;
|
|
}
|
|
in_buf = ec_dev->din;
|
|
i2c_msg[1].len = packet_len;
|
|
i2c_msg[1].buf = (char *) in_buf;
|
|
|
|
packet_len = msg->outsize + request_header_size;
|
|
if (packet_len > ec_dev->dout_size) {
|
|
ret = -EINVAL;
|
|
goto done;
|
|
}
|
|
out_buf = ec_dev->dout;
|
|
i2c_msg[0].len = packet_len;
|
|
i2c_msg[0].buf = (char *) out_buf;
|
|
|
|
/* create request data */
|
|
ec_request_i2c = (struct ec_host_request_i2c *) out_buf;
|
|
ec_request_i2c->command_protocol = EC_COMMAND_PROTOCOL_3;
|
|
|
|
ec_dev->dout++;
|
|
ret = cros_ec_prepare_tx(ec_dev, msg);
|
|
if (ret < 0)
|
|
goto done;
|
|
ec_dev->dout--;
|
|
|
|
/* send command to EC and read answer */
|
|
ret = i2c_transfer(client->adapter, i2c_msg, 2);
|
|
if (ret < 0) {
|
|
dev_dbg(ec_dev->dev, "i2c transfer failed: %d\n", ret);
|
|
goto done;
|
|
} else if (ret != 2) {
|
|
dev_err(ec_dev->dev, "failed to get response: %d\n", ret);
|
|
ret = -EIO;
|
|
goto done;
|
|
}
|
|
|
|
ec_response_i2c = (struct ec_host_response_i2c *) in_buf;
|
|
msg->result = ec_response_i2c->result;
|
|
ec_response = &ec_response_i2c->ec_response;
|
|
|
|
switch (msg->result) {
|
|
case EC_RES_SUCCESS:
|
|
break;
|
|
case EC_RES_IN_PROGRESS:
|
|
ret = -EAGAIN;
|
|
dev_dbg(ec_dev->dev, "command 0x%02x in progress\n",
|
|
msg->command);
|
|
goto done;
|
|
|
|
default:
|
|
dev_dbg(ec_dev->dev, "command 0x%02x returned %d\n",
|
|
msg->command, msg->result);
|
|
/*
|
|
* When we send v3 request to v2 ec, ec won't recognize the
|
|
* 0xda (EC_COMMAND_PROTOCOL_3) and will return with status
|
|
* EC_RES_INVALID_COMMAND with zero data length.
|
|
*
|
|
* In case of invalid command for v3 protocol the data length
|
|
* will be at least sizeof(struct ec_host_response)
|
|
*/
|
|
if (ec_response_i2c->result == EC_RES_INVALID_COMMAND &&
|
|
ec_response_i2c->packet_length == 0) {
|
|
ret = -EPROTONOSUPPORT;
|
|
goto done;
|
|
}
|
|
}
|
|
|
|
if (ec_response_i2c->packet_length < sizeof(struct ec_host_response)) {
|
|
dev_err(ec_dev->dev,
|
|
"response of %u bytes too short; not a full header\n",
|
|
ec_response_i2c->packet_length);
|
|
ret = -EBADMSG;
|
|
goto done;
|
|
}
|
|
|
|
if (msg->insize < ec_response->data_len) {
|
|
dev_err(ec_dev->dev,
|
|
"response data size is too large: expected %u, got %u\n",
|
|
msg->insize,
|
|
ec_response->data_len);
|
|
ret = -EMSGSIZE;
|
|
goto done;
|
|
}
|
|
|
|
/* copy response packet payload and compute checksum */
|
|
sum = 0;
|
|
for (i = 0; i < sizeof(struct ec_host_response); i++)
|
|
sum += ((u8 *)ec_response)[i];
|
|
|
|
memcpy(msg->data,
|
|
in_buf + response_header_size,
|
|
ec_response->data_len);
|
|
for (i = 0; i < ec_response->data_len; i++)
|
|
sum += msg->data[i];
|
|
|
|
/* All bytes should sum to zero */
|
|
if (sum) {
|
|
dev_err(ec_dev->dev, "bad packet checksum\n");
|
|
ret = -EBADMSG;
|
|
goto done;
|
|
}
|
|
|
|
ret = ec_response->data_len;
|
|
|
|
done:
|
|
if (msg->command == EC_CMD_REBOOT_EC)
|
|
msleep(EC_REBOOT_DELAY_MS);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int cros_ec_cmd_xfer_i2c(struct cros_ec_device *ec_dev,
|
|
struct cros_ec_command *msg)
|
|
{
|
|
struct i2c_client *client = ec_dev->priv;
|
|
int ret = -ENOMEM;
|
|
int i;
|
|
int len;
|
|
int packet_len;
|
|
u8 *out_buf = NULL;
|
|
u8 *in_buf = NULL;
|
|
u8 sum;
|
|
struct i2c_msg i2c_msg[2];
|
|
|
|
i2c_msg[0].addr = client->addr;
|
|
i2c_msg[0].flags = 0;
|
|
i2c_msg[1].addr = client->addr;
|
|
i2c_msg[1].flags = I2C_M_RD;
|
|
|
|
/*
|
|
* allocate larger packet (one byte for checksum, one byte for
|
|
* length, and one for result code)
|
|
*/
|
|
packet_len = msg->insize + 3;
|
|
in_buf = kzalloc(packet_len, GFP_KERNEL);
|
|
if (!in_buf)
|
|
goto done;
|
|
i2c_msg[1].len = packet_len;
|
|
i2c_msg[1].buf = (char *)in_buf;
|
|
|
|
/*
|
|
* allocate larger packet (one byte for checksum, one for
|
|
* command code, one for length, and one for command version)
|
|
*/
|
|
packet_len = msg->outsize + 4;
|
|
out_buf = kzalloc(packet_len, GFP_KERNEL);
|
|
if (!out_buf)
|
|
goto done;
|
|
i2c_msg[0].len = packet_len;
|
|
i2c_msg[0].buf = (char *)out_buf;
|
|
|
|
out_buf[0] = EC_CMD_VERSION0 + msg->version;
|
|
out_buf[1] = msg->command;
|
|
out_buf[2] = msg->outsize;
|
|
|
|
/* copy message payload and compute checksum */
|
|
sum = out_buf[0] + out_buf[1] + out_buf[2];
|
|
for (i = 0; i < msg->outsize; i++) {
|
|
out_buf[3 + i] = msg->data[i];
|
|
sum += out_buf[3 + i];
|
|
}
|
|
out_buf[3 + msg->outsize] = sum;
|
|
|
|
/* send command to EC and read answer */
|
|
ret = i2c_transfer(client->adapter, i2c_msg, 2);
|
|
if (ret < 0) {
|
|
dev_err(ec_dev->dev, "i2c transfer failed: %d\n", ret);
|
|
goto done;
|
|
} else if (ret != 2) {
|
|
dev_err(ec_dev->dev, "failed to get response: %d\n", ret);
|
|
ret = -EIO;
|
|
goto done;
|
|
}
|
|
|
|
/* check response error code */
|
|
msg->result = i2c_msg[1].buf[0];
|
|
ret = cros_ec_check_result(ec_dev, msg);
|
|
if (ret)
|
|
goto done;
|
|
|
|
len = in_buf[1];
|
|
if (len > msg->insize) {
|
|
dev_err(ec_dev->dev, "packet too long (%d bytes, expected %d)",
|
|
len, msg->insize);
|
|
ret = -ENOSPC;
|
|
goto done;
|
|
}
|
|
|
|
/* copy response packet payload and compute checksum */
|
|
sum = in_buf[0] + in_buf[1];
|
|
for (i = 0; i < len; i++) {
|
|
msg->data[i] = in_buf[2 + i];
|
|
sum += in_buf[2 + i];
|
|
}
|
|
dev_dbg(ec_dev->dev, "packet: %*ph, sum = %02x\n",
|
|
i2c_msg[1].len, in_buf, sum);
|
|
if (sum != in_buf[2 + len]) {
|
|
dev_err(ec_dev->dev, "bad packet checksum\n");
|
|
ret = -EBADMSG;
|
|
goto done;
|
|
}
|
|
|
|
ret = len;
|
|
done:
|
|
kfree(in_buf);
|
|
kfree(out_buf);
|
|
if (msg->command == EC_CMD_REBOOT_EC)
|
|
msleep(EC_REBOOT_DELAY_MS);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int cros_ec_i2c_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *dev_id)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct cros_ec_device *ec_dev = NULL;
|
|
int err;
|
|
|
|
ec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);
|
|
if (!ec_dev)
|
|
return -ENOMEM;
|
|
|
|
i2c_set_clientdata(client, ec_dev);
|
|
ec_dev->dev = dev;
|
|
ec_dev->priv = client;
|
|
ec_dev->irq = client->irq;
|
|
ec_dev->cmd_xfer = cros_ec_cmd_xfer_i2c;
|
|
ec_dev->pkt_xfer = cros_ec_pkt_xfer_i2c;
|
|
ec_dev->phys_name = client->adapter->name;
|
|
ec_dev->din_size = sizeof(struct ec_host_response_i2c) +
|
|
sizeof(struct ec_response_get_protocol_info);
|
|
ec_dev->dout_size = sizeof(struct ec_host_request_i2c);
|
|
|
|
err = cros_ec_register(ec_dev);
|
|
if (err) {
|
|
dev_err(dev, "cannot register EC\n");
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void cros_ec_i2c_remove(struct i2c_client *client)
|
|
{
|
|
struct cros_ec_device *ec_dev = i2c_get_clientdata(client);
|
|
|
|
cros_ec_unregister(ec_dev);
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int cros_ec_i2c_suspend(struct device *dev)
|
|
{
|
|
struct cros_ec_device *ec_dev = to_ec_dev(dev);
|
|
|
|
return cros_ec_suspend(ec_dev);
|
|
}
|
|
|
|
static int cros_ec_i2c_resume(struct device *dev)
|
|
{
|
|
struct cros_ec_device *ec_dev = to_ec_dev(dev);
|
|
|
|
return cros_ec_resume(ec_dev);
|
|
}
|
|
#endif
|
|
|
|
static const struct dev_pm_ops cros_ec_i2c_pm_ops = {
|
|
SET_LATE_SYSTEM_SLEEP_PM_OPS(cros_ec_i2c_suspend, cros_ec_i2c_resume)
|
|
};
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id cros_ec_i2c_of_match[] = {
|
|
{ .compatible = "google,cros-ec-i2c", },
|
|
{ /* sentinel */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, cros_ec_i2c_of_match);
|
|
#endif
|
|
|
|
static const struct i2c_device_id cros_ec_i2c_id[] = {
|
|
{ "cros-ec-i2c", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, cros_ec_i2c_id);
|
|
|
|
#ifdef CONFIG_ACPI
|
|
static const struct acpi_device_id cros_ec_i2c_acpi_id[] = {
|
|
{ "GOOG0008", 0 },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, cros_ec_i2c_acpi_id);
|
|
#endif
|
|
|
|
static struct i2c_driver cros_ec_driver = {
|
|
.driver = {
|
|
.name = "cros-ec-i2c",
|
|
.acpi_match_table = ACPI_PTR(cros_ec_i2c_acpi_id),
|
|
.of_match_table = of_match_ptr(cros_ec_i2c_of_match),
|
|
.pm = &cros_ec_i2c_pm_ops,
|
|
},
|
|
.probe = cros_ec_i2c_probe,
|
|
.remove = cros_ec_i2c_remove,
|
|
.id_table = cros_ec_i2c_id,
|
|
};
|
|
|
|
module_i2c_driver(cros_ec_driver);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DESCRIPTION("I2C interface for ChromeOS Embedded Controller");
|