iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/arch/powerpc/boot/dts
History
Scott Wood ccdde478e8 powerpc/dts/fsl: Fix dtc-flagged interrupt errors 
mpc8641_hpcn was updated to 4-cell interrupt specifiers, but
PCI interrupt-map was not updated.  It was also missing #interrupt-cells
on the outer PCI buses.

p1020rdb-pc was updated to 4-cell interrupt specifiers, but
the ethernet-phy nodes weren't updated.

mpc832x_rdb had an invalid "interrupts = <0>" on the ethernet-phy nodes.
Besides being the wrong number of cells, 0 is not a valid IPIC interrupt
according to ipic.c.  Presumably it was meant to indicate that these
PHYs are not connected to an interrupt.

Signed-off-by: Scott Wood <oss@buserror.net>
2018-12-21 21:37:05 -06:00
..
fsl
powerpc/dts/fsl: Fix dtc-flagged interrupt errors
2018-12-21 21:37:05 -06:00
a3m071.dts
powerpc/boot/dts: Remove leading 0x and 0s from bindings notation
2018-01-21 23:37:45 +11:00
a4m072.dts
powerpc/5200: Use the gpt* labels to simplify mpc5200 dts files
2013-02-11 21:48:09 +00:00
ac14xx.dts
powerpc/dts: Use a correct at24 compatible fallback in ac14xx
2018-07-10 10:58:40 +10:00
acadia.dts
powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'
2018-03-20 16:47:54 +11:00
adder875-redboot.dts
powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'
2018-03-20 16:47:54 +11:00
adder875-uboot.dts
powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'
2018-03-20 16:47:54 +11:00
akebono.dts
powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'
2018-03-20 16:47:54 +11:00
amigaone.dts
powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'
2018-03-20 16:47:54 +11:00
arches.dts
powerpc/44x: Update Arches dts
2010-02-10 08:21:16 -05:00
asp834x-redboot.dts
powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'
2018-03-20 16:47:54 +11:00
bamboo.dts
powerpc/44x/bamboo: Fix PCI range
2018-12-20 22:21:20 +11:00
bluestone.dts
powerpc/dts: fix STMicroelectronics compatible strings
2016-07-22 14:53:05 -05:00
canyonlands.dts
powerpc/dts: fix STMicroelectronics compatible strings
2016-07-22 14:53:05 -05:00
charon.dts
powerpc/5200: add support for charon board
2011-09-29 15:34:51 +02:00
cm5200.dts
powerpc/5200: Use the gpt* labels to simplify mpc5200 dts files
2013-02-11 21:48:09 +00:00
currituck.dts
powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'
2018-03-20 16:47:54 +11:00
digsy_mtc.dts
powerpc/5200: dts: digsy_mtc.dts: fix rv3029 compatible
2018-03-14 22:28:17 +11:00
ebony.dts
powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'
2018-03-20 16:47:54 +11:00
eiger.dts
powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'
2018-03-20 16:47:54 +11:00
ep88xc.dts
dt/bindings: Remove all references to device_type "ethernet-phy"
2014-01-16 11:11:51 +00:00
ep405.dts
powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'
2018-03-20 16:47:54 +11:00
ep8248e.dts
dt/bindings: remove users of device_type "mdio"
2014-01-16 16:25:56 +00:00
fsp2.dts
powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'
2018-03-20 16:47:54 +11:00
gamecube.dts
powerpc/boot/dts: Remove leading 0x and 0s from bindings notation
2018-01-21 23:37:45 +11:00
glacier.dts
powerpc/dts: fix STMicroelectronics compatible strings
2016-07-22 14:53:05 -05:00
haleakala.dts
powerpc/boot/dts: Remove leading 0x and 0s from bindings notation
2018-01-21 23:37:45 +11:00
holly.dts
powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'
2018-03-20 16:47:54 +11:00
hotfoot.dts
powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'
2018-03-20 16:47:54 +11:00
icon.dts
powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'
2018-03-20 16:47:54 +11:00
iss4xx-mpic.dts
powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'
2018-03-20 16:47:54 +11:00
iss4xx.dts
powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'
2018-03-20 16:47:54 +11:00
katmai.dts
powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'
2018-03-20 16:47:54 +11:00
kilauea.dts
powerpc/boot/dts: Remove leading 0x and 0s from bindings notation
2018-01-21 23:37:45 +11:00
klondike.dts
powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'
2018-03-20 16:47:54 +11:00
kmeter1.dts
powerpc/boot/dts: Remove leading 0x and 0s from bindings notation
2018-01-21 23:37:45 +11:00
ksi8560.dts
powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'
2018-03-20 16:47:54 +11:00
kuroboxHD.dts
powerpc/fsl: update compatiable on fsl 16550 uart nodes
2012-01-04 15:38:40 -06:00
kuroboxHG.dts
powerpc/fsl: update compatiable on fsl 16550 uart nodes
2012-01-04 15:38:40 -06:00
lite5200.dts
powerpc/5200: fix lite5200 ethernet phy address
2010-06-15 14:47:04 -06:00
lite5200b.dts
powerpc/5200: Add Lite5200 on-board LEDs as devices
2013-02-11 21:24:53 +00:00
makalu.dts
powerpc/boot/dts: Remove leading 0x and 0s from bindings notation
2018-01-21 23:37:45 +11:00
Makefile
powerpc: enable building all dtbs
2018-10-02 09:23:21 -05:00
media5200.dts
powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'
2018-03-20 16:47:54 +11:00
mgcoge.dts
powerpc/82xx: add SPI support for mgcoge
2012-07-10 07:07:20 -05:00
motionpro.dts
powerpc/5200: Use the gpt* labels to simplify mpc5200 dts files
2013-02-11 21:48:09 +00:00
mpc832x_mds.dts
powerpc/boot/dts: Remove leading 0x and 0s from bindings notation
2018-01-21 23:37:45 +11:00
mpc832x_rdb.dts
powerpc/dts/fsl: Fix dtc-flagged interrupt errors
2018-12-21 21:37:05 -06:00
mpc834x_mds.dts
dt/bindings: Remove all references to device_type "ethernet-phy"
2014-01-16 11:11:51 +00:00
mpc836x_mds.dts
powerpc/boot/dts: Remove leading 0x and 0s from bindings notation
2018-01-21 23:37:45 +11:00
mpc836x_rdk.dts
powerpc/dts: fix STMicroelectronics compatible strings
2016-07-22 14:53:05 -05:00
mpc866ads.dts
powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'
2018-03-20 16:47:54 +11:00
mpc885ads.dts
powerpc/8xx: Add DT node for using the SEC engine of the MPC885
2018-10-22 19:11:55 -05:00
mpc5121.dtsi
powerpc/512x: add a device tree binding for LocalPlus Bus FIFO
2015-10-22 15:20:47 +02:00
mpc5121ads.dts
powerpc/dts: Use #include "..." to include local DT
2017-07-03 23:00:33 +10:00
mpc5125twr.dts
powerpc/512x: add a device tree binding for LocalPlus Bus FIFO
2015-10-22 15:20:47 +02:00
mpc5200b.dtsi
powerpc/5200: Add Lite5200 on-board LEDs as devices
2013-02-11 21:24:53 +00:00
mpc7448hpc2.dts
dt/bindings: remove users of device_type "mdio"
2014-01-16 16:25:56 +00:00
mpc8272ads.dts
powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'
2018-03-20 16:47:54 +11:00
mpc8308_p1m.dts
powerpc/83xx: Add generic compatible string for I2C EEPROM
2017-06-28 13:08:14 +10:00
mpc8308rdb.dts
dma: mpc512x: separate 'compatible' values for MPC512x and MPC8308
2014-05-02 22:36:21 +05:30
mpc8313erdb.dts
dt/bindings: Remove all references to device_type "ethernet-phy"
2014-01-16 11:11:51 +00:00
mpc8315erdb.dts
powerpc: use the new LED disk activity trigger
2016-06-27 08:58:40 +02:00
mpc8349emitx.dts
powerpc/83xx: Add generic compatible string for I2C EEPROM
2017-06-28 13:08:14 +10:00
mpc8349emitxgp.dts
dt/bindings: Remove all references to device_type "ethernet-phy"
2014-01-16 11:11:51 +00:00
mpc8377_mds.dts
dt/bindings: Remove all references to device_type "ethernet-phy"
2014-01-16 11:11:51 +00:00
mpc8377_rdb.dts
powerpc/83xx: Add generic compatible string for I2C EEPROM
2017-06-28 13:08:14 +10:00
mpc8377_wlan.dts
powerpc/83xx: Add generic compatible string for I2C EEPROM
2017-06-28 13:08:14 +10:00
mpc8378_mds.dts
dt/bindings: Remove all references to device_type "ethernet-phy"
2014-01-16 11:11:51 +00:00
mpc8378_rdb.dts
powerpc/83xx: Add generic compatible string for I2C EEPROM
2017-06-28 13:08:14 +10:00
mpc8379_mds.dts
dt/bindings: Remove all references to device_type "ethernet-phy"
2014-01-16 11:11:51 +00:00
mpc8379_rdb.dts
powerpc/83xx: Add generic compatible string for I2C EEPROM
2017-06-28 13:08:14 +10:00
mpc8610_hpcd.dts
powerpc/fsl: update compatiable on fsl 16550 uart nodes
2012-01-04 15:38:40 -06:00
mucmc52.dts
powerpc/5200: Use the gpt* labels to simplify mpc5200 dts files
2013-02-11 21:48:09 +00:00
mvme5100.dts
powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'
2018-03-20 16:47:54 +11:00
o2d300.dts
powerpc/mpc5200: add dts files for ifm camera machines
2012-09-14 10:10:01 +02:00
o2d.dts
powerpc/mpc5200: add dts files for ifm camera machines
2012-09-14 10:10:01 +02:00
o2d.dtsi
powerpc/5200: Use the gpt* labels to simplify mpc5200 dts files
2013-02-11 21:48:09 +00:00
o2dnt2.dts
powerpc/mpc5200: add dts files for ifm camera machines
2012-09-14 10:10:01 +02:00
o2i.dts
powerpc/mpc5200: add dts files for ifm camera machines
2012-09-14 10:10:01 +02:00
o2mnt.dts
powerpc/mpc5200: add dts files for ifm camera machines
2012-09-14 10:10:01 +02:00
o3dnt.dts
powerpc/mpc5200: add dts files for ifm camera machines
2012-09-14 10:10:01 +02:00
obs600.dts
powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'
2018-03-20 16:47:54 +11:00
pcm030.dts
powerpc/5200: Add generic compatible string for I2C EEPROM
2017-06-28 13:08:13 +10:00
pcm032.dts
powerpc/5200: Add generic compatible string for I2C EEPROM
2017-06-28 13:08:13 +10:00
pdm360ng.dts
powerpc/dts: Use 'atmel' as at24 manufacturer for pdm360ng
2018-07-10 10:58:27 +10:00
pq2fads.dts
powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'
2018-03-20 16:47:54 +11:00
ps3.dts
…
rainier.dts
powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'
2018-03-20 16:47:54 +11:00
redwood.dts
powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'
2018-03-20 16:47:54 +11:00
sam440ep.dts
powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'
2018-03-20 16:47:54 +11:00
sbc8548-altflash.dts
powerpc/boot/dts: Remove leading 0x and 0s from bindings notation
2018-01-21 23:37:45 +11:00
sbc8548-post.dtsi
dt/bindings: Remove all references to device_type "ethernet-phy"
2014-01-16 11:11:51 +00:00
sbc8548-pre.dtsi
powerpc/85xx: split sbc8548 dts file into pre and post chunks
2013-02-13 07:48:58 -06:00
sbc8548.dts
powerpc/boot/dts: Remove leading 0x and 0s from bindings notation
2018-01-21 23:37:45 +11:00
sequoia.dts
powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'
2018-03-20 16:47:54 +11:00
socrates.dts
powerpc/fsl: update compatiable on fsl 16550 uart nodes
2012-01-04 15:38:40 -06:00
storcenter.dts
powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'
2018-03-20 16:47:54 +11:00
stx_gp3_8560.dts
dt/bindings: Remove all references to device_type "ethernet-phy"
2014-01-16 11:11:51 +00:00
stxssa8555.dts
dt/bindings: Remove all references to device_type "ethernet-phy"
2014-01-16 11:11:51 +00:00
taishan.dts
powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'
2018-03-20 16:47:54 +11:00
tqm8xx.dts
dt/bindings: Remove all references to device_type "ethernet-phy"
2014-01-16 11:11:51 +00:00
tqm5200.dts
powerpc/boot/dts: drop obsolete 'fsl5200-clocking'
2009-10-15 09:58:27 -06:00
tqm8540.dts
dt/bindings: Remove all references to device_type "ethernet-phy"
2014-01-16 11:11:51 +00:00
tqm8541.dts
dt/bindings: Remove all references to device_type "ethernet-phy"
2014-01-16 11:11:51 +00:00
tqm8548-bigflash.dts
dt/bindings: Remove all references to device_type "ethernet-phy"
2014-01-16 11:11:51 +00:00
tqm8548.dts
dt/bindings: Remove all references to device_type "ethernet-phy"
2014-01-16 11:11:51 +00:00
tqm8555.dts
dt/bindings: Remove all references to device_type "ethernet-phy"
2014-01-16 11:11:51 +00:00
tqm8560.dts
dt/bindings: Remove all references to device_type "ethernet-phy"
2014-01-16 11:11:51 +00:00
uc101.dts
powerpc/5200: Use the gpt* labels to simplify mpc5200 dts files
2013-02-11 21:48:09 +00:00
virtex440-ml507.dts
powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'
2018-03-20 16:47:54 +11:00
virtex440-ml510.dts
powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'
2018-03-20 16:47:54 +11:00
walnut.dts
powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'
2018-03-20 16:47:54 +11:00
warp.dts
powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'
2018-03-20 16:47:54 +11:00
wii.dts
powerpc/wii.dts: Add drive slot LED
2018-04-01 00:47:41 +11:00
xcalibur1501.dts
powerpc/dts: fix STMicroelectronics compatible strings
2016-07-22 14:53:05 -05:00
xpedite5200_xmon.dts
powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'
2018-03-20 16:47:54 +11:00
xpedite5200.dts
powerpc/dts: fix STMicroelectronics compatible strings
2016-07-22 14:53:05 -05:00
xpedite5301.dts
powerpc/dts: fix STMicroelectronics compatible strings
2016-07-22 14:53:05 -05:00
xpedite5330.dts
powerpc/dts: fix STMicroelectronics compatible strings
2016-07-22 14:53:05 -05:00
xpedite5370.dts
powerpc/dts: fix STMicroelectronics compatible strings
2016-07-22 14:53:05 -05:00
yosemite.dts
powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'
2018-03-20 16:47:54 +11:00