e12c4703ce
As per spec, it is allowed to pulse the HPD signal to indicate that the EDID information has changed. Some monitors do this when they wake up from standby or are enabled. When the HPD goes low the adv7511 is reset and the outputs are disabled which might cause the monitor to go to standby again. To avoid this we ignore the HPD pin for the first few seconds after enabling the output. On the other hand, adv7535 require to enable HPD Override bit for proper HPD. Add hpd_override_enable variable to struct adv7511_chip_info to handle this scenario. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230830142358.275459-9-biju.das.jz@bp.renesas.com