linux/arch/powerpc/kernel/watchdog.c
Nicholas Piggin e012c49998 powerpc/watchdog: help remote CPUs to flush NMI printk output
The printk layer at the moment does not seem to have a good way to force
flush printk messages that are created in NMI context, except in the
panic path.

NMI-context printk messages normally get to the console with irq_work,
but that won't help if the CPU is stuck with irqs disabled, as can be
the case for hard lockup watchdog messages.

The watchdog currently flushes the printk buffers after detecting a
lockup on remote CPUs, but they may not have processed their NMI IPI
yet by that stage, or they may have self-detected a lockup in which
case they won't go via this NMI IPI path.

Improve the situation by having NMI-context mark a flag if it called
printk, and have watchdog timer interrupts check if that flag was set
and try to flush if it was. Latency is not a big problem because we
were already stuck for a while, just need to try to make sure the
messages eventually make it out.

Depends-on: 5d5e4522a7 ("printk: restore flushing of NMI buffers on remote CPUs after NMI backtraces")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211119113146.752759-6-npiggin@gmail.com
2021-11-29 23:08:43 +11:00

573 lines
16 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Watchdog support on powerpc systems.
*
* Copyright 2017, IBM Corporation.
*
* This uses code from arch/sparc/kernel/nmi.c and kernel/watchdog.c
*/
#define pr_fmt(fmt) "watchdog: " fmt
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/init.h>
#include <linux/percpu.h>
#include <linux/cpu.h>
#include <linux/nmi.h>
#include <linux/module.h>
#include <linux/export.h>
#include <linux/kprobes.h>
#include <linux/hardirq.h>
#include <linux/reboot.h>
#include <linux/slab.h>
#include <linux/kdebug.h>
#include <linux/sched/debug.h>
#include <linux/delay.h>
#include <linux/processor.h>
#include <linux/smp.h>
#include <asm/interrupt.h>
#include <asm/paca.h>
#include <asm/nmi.h>
/*
* The powerpc watchdog ensures that each CPU is able to service timers.
* The watchdog sets up a simple timer on each CPU to run once per timer
* period, and updates a per-cpu timestamp and a "pending" cpumask. This is
* the heartbeat.
*
* Then there are two systems to check that the heartbeat is still running.
* The local soft-NMI, and the SMP checker.
*
* The soft-NMI checker can detect lockups on the local CPU. When interrupts
* are disabled with local_irq_disable(), platforms that use soft-masking
* can leave hardware interrupts enabled and handle them with a masked
* interrupt handler. The masked handler can send the timer interrupt to the
* watchdog's soft_nmi_interrupt(), which appears to Linux as an NMI
* interrupt, and can be used to detect CPUs stuck with IRQs disabled.
*
* The soft-NMI checker will compare the heartbeat timestamp for this CPU
* with the current time, and take action if the difference exceeds the
* watchdog threshold.
*
* The limitation of the soft-NMI watchdog is that it does not work when
* interrupts are hard disabled or otherwise not being serviced. This is
* solved by also having a SMP watchdog where all CPUs check all other
* CPUs heartbeat.
*
* The SMP checker can detect lockups on other CPUs. A gobal "pending"
* cpumask is kept, containing all CPUs which enable the watchdog. Each
* CPU clears their pending bit in their heartbeat timer. When the bitmask
* becomes empty, the last CPU to clear its pending bit updates a global
* timestamp and refills the pending bitmask.
*
* In the heartbeat timer, if any CPU notices that the global timestamp has
* not been updated for a period exceeding the watchdog threshold, then it
* means the CPU(s) with their bit still set in the pending mask have had
* their heartbeat stop, and action is taken.
*
* Some platforms implement true NMI IPIs, which can be used by the SMP
* watchdog to detect an unresponsive CPU and pull it out of its stuck
* state with the NMI IPI, to get crash/debug data from it. This way the
* SMP watchdog can detect hardware interrupts off lockups.
*/
static cpumask_t wd_cpus_enabled __read_mostly;
static u64 wd_panic_timeout_tb __read_mostly; /* timebase ticks until panic */
static u64 wd_smp_panic_timeout_tb __read_mostly; /* panic other CPUs */
static u64 wd_timer_period_ms __read_mostly; /* interval between heartbeat */
static DEFINE_PER_CPU(struct hrtimer, wd_hrtimer);
static DEFINE_PER_CPU(u64, wd_timer_tb);
/* SMP checker bits */
static unsigned long __wd_smp_lock;
static unsigned long __wd_reporting;
static unsigned long __wd_nmi_output;
static cpumask_t wd_smp_cpus_pending;
static cpumask_t wd_smp_cpus_stuck;
static u64 wd_smp_last_reset_tb;
/*
* Try to take the exclusive watchdog action / NMI IPI / printing lock.
* wd_smp_lock must be held. If this fails, we should return and wait
* for the watchdog to kick in again (or another CPU to trigger it).
*
* Importantly, if hardlockup_panic is set, wd_try_report failure should
* not delay the panic, because whichever other CPU is reporting will
* call panic.
*/
static bool wd_try_report(void)
{
if (__wd_reporting)
return false;
__wd_reporting = 1;
return true;
}
/* End printing after successful wd_try_report. wd_smp_lock not required. */
static void wd_end_reporting(void)
{
smp_mb(); /* End printing "critical section" */
WARN_ON_ONCE(__wd_reporting == 0);
WRITE_ONCE(__wd_reporting, 0);
}
static inline void wd_smp_lock(unsigned long *flags)
{
/*
* Avoid locking layers if possible.
* This may be called from low level interrupt handlers at some
* point in future.
*/
raw_local_irq_save(*flags);
hard_irq_disable(); /* Make it soft-NMI safe */
while (unlikely(test_and_set_bit_lock(0, &__wd_smp_lock))) {
raw_local_irq_restore(*flags);
spin_until_cond(!test_bit(0, &__wd_smp_lock));
raw_local_irq_save(*flags);
hard_irq_disable();
}
}
static inline void wd_smp_unlock(unsigned long *flags)
{
clear_bit_unlock(0, &__wd_smp_lock);
raw_local_irq_restore(*flags);
}
static void wd_lockup_ipi(struct pt_regs *regs)
{
int cpu = raw_smp_processor_id();
u64 tb = get_tb();
pr_emerg("CPU %d Hard LOCKUP\n", cpu);
pr_emerg("CPU %d TB:%lld, last heartbeat TB:%lld (%lldms ago)\n",
cpu, tb, per_cpu(wd_timer_tb, cpu),
tb_to_ns(tb - per_cpu(wd_timer_tb, cpu)) / 1000000);
print_modules();
print_irqtrace_events(current);
if (regs)
show_regs(regs);
else
dump_stack();
/*
* __wd_nmi_output must be set after we printk from NMI context.
*
* printk from NMI context defers printing to the console to irq_work.
* If that NMI was taken in some code that is hard-locked, then irqs
* are disabled so irq_work will never fire. That can result in the
* hard lockup messages being delayed (indefinitely, until something
* else kicks the console drivers).
*
* Setting __wd_nmi_output will cause another CPU to notice and kick
* the console drivers for us.
*
* xchg is not needed here (it could be a smp_mb and store), but xchg
* gives the memory ordering and atomicity required.
*/
xchg(&__wd_nmi_output, 1);
/* Do not panic from here because that can recurse into NMI IPI layer */
}
static bool set_cpu_stuck(int cpu)
{
cpumask_set_cpu(cpu, &wd_smp_cpus_stuck);
cpumask_clear_cpu(cpu, &wd_smp_cpus_pending);
/*
* See wd_smp_clear_cpu_pending()
*/
smp_mb();
if (cpumask_empty(&wd_smp_cpus_pending)) {
wd_smp_last_reset_tb = get_tb();
cpumask_andnot(&wd_smp_cpus_pending,
&wd_cpus_enabled,
&wd_smp_cpus_stuck);
return true;
}
return false;
}
static void watchdog_smp_panic(int cpu)
{
static cpumask_t wd_smp_cpus_ipi; // protected by reporting
unsigned long flags;
u64 tb, last_reset;
int c;
wd_smp_lock(&flags);
/* Double check some things under lock */
tb = get_tb();
last_reset = wd_smp_last_reset_tb;
if ((s64)(tb - last_reset) < (s64)wd_smp_panic_timeout_tb)
goto out;
if (cpumask_test_cpu(cpu, &wd_smp_cpus_pending))
goto out;
if (!wd_try_report())
goto out;
for_each_online_cpu(c) {
if (!cpumask_test_cpu(c, &wd_smp_cpus_pending))
continue;
if (c == cpu)
continue; // should not happen
__cpumask_set_cpu(c, &wd_smp_cpus_ipi);
if (set_cpu_stuck(c))
break;
}
if (cpumask_empty(&wd_smp_cpus_ipi)) {
wd_end_reporting();
goto out;
}
wd_smp_unlock(&flags);
pr_emerg("CPU %d detected hard LOCKUP on other CPUs %*pbl\n",
cpu, cpumask_pr_args(&wd_smp_cpus_ipi));
pr_emerg("CPU %d TB:%lld, last SMP heartbeat TB:%lld (%lldms ago)\n",
cpu, tb, last_reset, tb_to_ns(tb - last_reset) / 1000000);
if (!sysctl_hardlockup_all_cpu_backtrace) {
/*
* Try to trigger the stuck CPUs, unless we are going to
* get a backtrace on all of them anyway.
*/
for_each_cpu(c, &wd_smp_cpus_ipi) {
smp_send_nmi_ipi(c, wd_lockup_ipi, 1000000);
__cpumask_clear_cpu(c, &wd_smp_cpus_ipi);
}
} else {
trigger_allbutself_cpu_backtrace();
cpumask_clear(&wd_smp_cpus_ipi);
}
if (hardlockup_panic)
nmi_panic(NULL, "Hard LOCKUP");
wd_end_reporting();
return;
out:
wd_smp_unlock(&flags);
}
static void wd_smp_clear_cpu_pending(int cpu)
{
if (!cpumask_test_cpu(cpu, &wd_smp_cpus_pending)) {
if (unlikely(cpumask_test_cpu(cpu, &wd_smp_cpus_stuck))) {
struct pt_regs *regs = get_irq_regs();
unsigned long flags;
pr_emerg("CPU %d became unstuck TB:%lld\n",
cpu, get_tb());
print_irqtrace_events(current);
if (regs)
show_regs(regs);
else
dump_stack();
wd_smp_lock(&flags);
cpumask_clear_cpu(cpu, &wd_smp_cpus_stuck);
wd_smp_unlock(&flags);
} else {
/*
* The last CPU to clear pending should have reset the
* watchdog so we generally should not find it empty
* here if our CPU was clear. However it could happen
* due to a rare race with another CPU taking the
* last CPU out of the mask concurrently.
*
* We can't add a warning for it. But just in case
* there is a problem with the watchdog that is causing
* the mask to not be reset, try to kick it along here.
*/
if (unlikely(cpumask_empty(&wd_smp_cpus_pending)))
goto none_pending;
}
return;
}
/*
* All other updates to wd_smp_cpus_pending are performed under
* wd_smp_lock. All of them are atomic except the case where the
* mask becomes empty and is reset. This will not happen here because
* cpu was tested to be in the bitmap (above), and a CPU only clears
* its own bit. _Except_ in the case where another CPU has detected a
* hard lockup on our CPU and takes us out of the pending mask. So in
* normal operation there will be no race here, no problem.
*
* In the lockup case, this atomic clear-bit vs a store that refills
* other bits in the accessed word wll not be a problem. The bit clear
* is atomic so it will not cause the store to get lost, and the store
* will never set this bit so it will not overwrite the bit clear. The
* only way for a stuck CPU to return to the pending bitmap is to
* become unstuck itself.
*/
cpumask_clear_cpu(cpu, &wd_smp_cpus_pending);
/*
* Order the store to clear pending with the load(s) to check all
* words in the pending mask to check they are all empty. This orders
* with the same barrier on another CPU. This prevents two CPUs
* clearing the last 2 pending bits, but neither seeing the other's
* store when checking if the mask is empty, and missing an empty
* mask, which ends with a false positive.
*/
smp_mb();
if (cpumask_empty(&wd_smp_cpus_pending)) {
unsigned long flags;
none_pending:
/*
* Double check under lock because more than one CPU could see
* a clear mask with the lockless check after clearing their
* pending bits.
*/
wd_smp_lock(&flags);
if (cpumask_empty(&wd_smp_cpus_pending)) {
wd_smp_last_reset_tb = get_tb();
cpumask_andnot(&wd_smp_cpus_pending,
&wd_cpus_enabled,
&wd_smp_cpus_stuck);
}
wd_smp_unlock(&flags);
}
}
static void watchdog_timer_interrupt(int cpu)
{
u64 tb = get_tb();
per_cpu(wd_timer_tb, cpu) = tb;
wd_smp_clear_cpu_pending(cpu);
if ((s64)(tb - wd_smp_last_reset_tb) >= (s64)wd_smp_panic_timeout_tb)
watchdog_smp_panic(cpu);
if (__wd_nmi_output && xchg(&__wd_nmi_output, 0)) {
/*
* Something has called printk from NMI context. It might be
* stuck, so this this triggers a flush that will get that
* printk output to the console.
*
* See wd_lockup_ipi.
*/
printk_trigger_flush();
}
}
DEFINE_INTERRUPT_HANDLER_NMI(soft_nmi_interrupt)
{
unsigned long flags;
int cpu = raw_smp_processor_id();
u64 tb;
/* should only arrive from kernel, with irqs disabled */
WARN_ON_ONCE(!arch_irq_disabled_regs(regs));
if (!cpumask_test_cpu(cpu, &wd_cpus_enabled))
return 0;
__this_cpu_inc(irq_stat.soft_nmi_irqs);
tb = get_tb();
if (tb - per_cpu(wd_timer_tb, cpu) >= wd_panic_timeout_tb) {
/*
* Taking wd_smp_lock here means it is a soft-NMI lock, which
* means we can't take any regular or irqsafe spin locks while
* holding this lock. This is why timers can't printk while
* holding the lock.
*/
wd_smp_lock(&flags);
if (cpumask_test_cpu(cpu, &wd_smp_cpus_stuck)) {
wd_smp_unlock(&flags);
return 0;
}
if (!wd_try_report()) {
wd_smp_unlock(&flags);
/* Couldn't report, try again in 100ms */
mtspr(SPRN_DEC, 100 * tb_ticks_per_usec * 1000);
return 0;
}
set_cpu_stuck(cpu);
wd_smp_unlock(&flags);
pr_emerg("CPU %d self-detected hard LOCKUP @ %pS\n",
cpu, (void *)regs->nip);
pr_emerg("CPU %d TB:%lld, last heartbeat TB:%lld (%lldms ago)\n",
cpu, tb, per_cpu(wd_timer_tb, cpu),
tb_to_ns(tb - per_cpu(wd_timer_tb, cpu)) / 1000000);
print_modules();
print_irqtrace_events(current);
show_regs(regs);
xchg(&__wd_nmi_output, 1); // see wd_lockup_ipi
if (sysctl_hardlockup_all_cpu_backtrace)
trigger_allbutself_cpu_backtrace();
if (hardlockup_panic)
nmi_panic(regs, "Hard LOCKUP");
wd_end_reporting();
}
/*
* We are okay to change DEC in soft_nmi_interrupt because the masked
* handler has marked a DEC as pending, so the timer interrupt will be
* replayed as soon as local irqs are enabled again.
*/
if (wd_panic_timeout_tb < 0x7fffffff)
mtspr(SPRN_DEC, wd_panic_timeout_tb);
return 0;
}
static enum hrtimer_restart watchdog_timer_fn(struct hrtimer *hrtimer)
{
int cpu = smp_processor_id();
if (!(watchdog_enabled & NMI_WATCHDOG_ENABLED))
return HRTIMER_NORESTART;
if (!cpumask_test_cpu(cpu, &watchdog_cpumask))
return HRTIMER_NORESTART;
watchdog_timer_interrupt(cpu);
hrtimer_forward_now(hrtimer, ms_to_ktime(wd_timer_period_ms));
return HRTIMER_RESTART;
}
void arch_touch_nmi_watchdog(void)
{
unsigned long ticks = tb_ticks_per_usec * wd_timer_period_ms * 1000;
int cpu = smp_processor_id();
u64 tb;
if (!cpumask_test_cpu(cpu, &watchdog_cpumask))
return;
tb = get_tb();
if (tb - per_cpu(wd_timer_tb, cpu) >= ticks) {
per_cpu(wd_timer_tb, cpu) = tb;
wd_smp_clear_cpu_pending(cpu);
}
}
EXPORT_SYMBOL(arch_touch_nmi_watchdog);
static void start_watchdog(void *arg)
{
struct hrtimer *hrtimer = this_cpu_ptr(&wd_hrtimer);
int cpu = smp_processor_id();
unsigned long flags;
if (cpumask_test_cpu(cpu, &wd_cpus_enabled)) {
WARN_ON(1);
return;
}
if (!(watchdog_enabled & NMI_WATCHDOG_ENABLED))
return;
if (!cpumask_test_cpu(cpu, &watchdog_cpumask))
return;
wd_smp_lock(&flags);
cpumask_set_cpu(cpu, &wd_cpus_enabled);
if (cpumask_weight(&wd_cpus_enabled) == 1) {
cpumask_set_cpu(cpu, &wd_smp_cpus_pending);
wd_smp_last_reset_tb = get_tb();
}
wd_smp_unlock(&flags);
*this_cpu_ptr(&wd_timer_tb) = get_tb();
hrtimer_init(hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
hrtimer->function = watchdog_timer_fn;
hrtimer_start(hrtimer, ms_to_ktime(wd_timer_period_ms),
HRTIMER_MODE_REL_PINNED);
}
static int start_watchdog_on_cpu(unsigned int cpu)
{
return smp_call_function_single(cpu, start_watchdog, NULL, true);
}
static void stop_watchdog(void *arg)
{
struct hrtimer *hrtimer = this_cpu_ptr(&wd_hrtimer);
int cpu = smp_processor_id();
unsigned long flags;
if (!cpumask_test_cpu(cpu, &wd_cpus_enabled))
return; /* Can happen in CPU unplug case */
hrtimer_cancel(hrtimer);
wd_smp_lock(&flags);
cpumask_clear_cpu(cpu, &wd_cpus_enabled);
wd_smp_unlock(&flags);
wd_smp_clear_cpu_pending(cpu);
}
static int stop_watchdog_on_cpu(unsigned int cpu)
{
return smp_call_function_single(cpu, stop_watchdog, NULL, true);
}
static void watchdog_calc_timeouts(void)
{
wd_panic_timeout_tb = watchdog_thresh * ppc_tb_freq;
/* Have the SMP detector trigger a bit later */
wd_smp_panic_timeout_tb = wd_panic_timeout_tb * 3 / 2;
/* 2/5 is the factor that the perf based detector uses */
wd_timer_period_ms = watchdog_thresh * 1000 * 2 / 5;
}
void watchdog_nmi_stop(void)
{
int cpu;
for_each_cpu(cpu, &wd_cpus_enabled)
stop_watchdog_on_cpu(cpu);
}
void watchdog_nmi_start(void)
{
int cpu;
watchdog_calc_timeouts();
for_each_cpu_and(cpu, cpu_online_mask, &watchdog_cpumask)
start_watchdog_on_cpu(cpu);
}
/*
* Invoked from core watchdog init.
*/
int __init watchdog_nmi_probe(void)
{
int err;
err = cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN,
"powerpc/watchdog:online",
start_watchdog_on_cpu,
stop_watchdog_on_cpu);
if (err < 0) {
pr_warn("could not be initialized");
return err;
}
return 0;
}