cd99758ba3
The modern idiom is to use irq_domain to allocate interrupts. This is useful partly to allow further infrastructure to be based on the domains and partly because it makes it much easier to allocate virtual interrupts to devices as we don't need to allocate a contiguous range of interrupt numbers. Convert the wm831x driver over to this infrastructure, using a legacy IRQ mapping if an irq_base is specified in platform data and otherwise using a linear mapping, always registering the interrupts even if they won't ever be used. Only boards which need to use the GPIOs as interrupts should need to use an irq_base. This means that we can't use the MFD irq_base management since the unless we're using an explicit irq_base from platform data we can't rely on a linear mapping of interrupts. Instead we need to map things via the irq_domain - provide a conveniencem function wm831x_irq() to save a small amount of typing when doing so. Looking at this I couldn't clearly see anything the MFD core could do to make this nicer. Since we're not supporting device tree yet there's no meaningful advantage if we don't do this conversion in one, the fact that the interrupt resources are used for repeated IP blocks makes accessor functions for the irq_domain more trouble to do than they're worth. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
886 lines
21 KiB
C
886 lines
21 KiB
C
/*
|
|
* wm831x-ldo.c -- LDO driver for the WM831x series
|
|
*
|
|
* Copyright 2009 Wolfson Microelectronics PLC.
|
|
*
|
|
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/init.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/err.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/mfd/wm831x/core.h>
|
|
#include <linux/mfd/wm831x/regulator.h>
|
|
#include <linux/mfd/wm831x/pdata.h>
|
|
|
|
#define WM831X_LDO_MAX_NAME 6
|
|
|
|
#define WM831X_LDO_CONTROL 0
|
|
#define WM831X_LDO_ON_CONTROL 1
|
|
#define WM831X_LDO_SLEEP_CONTROL 2
|
|
|
|
#define WM831X_ALIVE_LDO_ON_CONTROL 0
|
|
#define WM831X_ALIVE_LDO_SLEEP_CONTROL 1
|
|
|
|
struct wm831x_ldo {
|
|
char name[WM831X_LDO_MAX_NAME];
|
|
struct regulator_desc desc;
|
|
int base;
|
|
struct wm831x *wm831x;
|
|
struct regulator_dev *regulator;
|
|
};
|
|
|
|
/*
|
|
* Shared
|
|
*/
|
|
|
|
static int wm831x_ldo_is_enabled(struct regulator_dev *rdev)
|
|
{
|
|
struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
|
|
struct wm831x *wm831x = ldo->wm831x;
|
|
int mask = 1 << rdev_get_id(rdev);
|
|
int reg;
|
|
|
|
reg = wm831x_reg_read(wm831x, WM831X_LDO_ENABLE);
|
|
if (reg < 0)
|
|
return reg;
|
|
|
|
if (reg & mask)
|
|
return 1;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
static int wm831x_ldo_enable(struct regulator_dev *rdev)
|
|
{
|
|
struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
|
|
struct wm831x *wm831x = ldo->wm831x;
|
|
int mask = 1 << rdev_get_id(rdev);
|
|
|
|
return wm831x_set_bits(wm831x, WM831X_LDO_ENABLE, mask, mask);
|
|
}
|
|
|
|
static int wm831x_ldo_disable(struct regulator_dev *rdev)
|
|
{
|
|
struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
|
|
struct wm831x *wm831x = ldo->wm831x;
|
|
int mask = 1 << rdev_get_id(rdev);
|
|
|
|
return wm831x_set_bits(wm831x, WM831X_LDO_ENABLE, mask, 0);
|
|
}
|
|
|
|
static irqreturn_t wm831x_ldo_uv_irq(int irq, void *data)
|
|
{
|
|
struct wm831x_ldo *ldo = data;
|
|
|
|
regulator_notifier_call_chain(ldo->regulator,
|
|
REGULATOR_EVENT_UNDER_VOLTAGE,
|
|
NULL);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*
|
|
* General purpose LDOs
|
|
*/
|
|
|
|
#define WM831X_GP_LDO_SELECTOR_LOW 0xe
|
|
#define WM831X_GP_LDO_MAX_SELECTOR 0x1f
|
|
|
|
static int wm831x_gp_ldo_list_voltage(struct regulator_dev *rdev,
|
|
unsigned int selector)
|
|
{
|
|
/* 0.9-1.6V in 50mV steps */
|
|
if (selector <= WM831X_GP_LDO_SELECTOR_LOW)
|
|
return 900000 + (selector * 50000);
|
|
/* 1.7-3.3V in 50mV steps */
|
|
if (selector <= WM831X_GP_LDO_MAX_SELECTOR)
|
|
return 1600000 + ((selector - WM831X_GP_LDO_SELECTOR_LOW)
|
|
* 100000);
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int wm831x_gp_ldo_set_voltage_int(struct regulator_dev *rdev, int reg,
|
|
int min_uV, int max_uV,
|
|
unsigned *selector)
|
|
{
|
|
struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
|
|
struct wm831x *wm831x = ldo->wm831x;
|
|
int vsel, ret;
|
|
|
|
if (min_uV < 900000)
|
|
vsel = 0;
|
|
else if (min_uV < 1700000)
|
|
vsel = ((min_uV - 900000) / 50000);
|
|
else
|
|
vsel = ((min_uV - 1700000) / 100000)
|
|
+ WM831X_GP_LDO_SELECTOR_LOW + 1;
|
|
|
|
ret = wm831x_gp_ldo_list_voltage(rdev, vsel);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (ret < min_uV || ret > max_uV)
|
|
return -EINVAL;
|
|
|
|
*selector = vsel;
|
|
|
|
return wm831x_set_bits(wm831x, reg, WM831X_LDO1_ON_VSEL_MASK, vsel);
|
|
}
|
|
|
|
static int wm831x_gp_ldo_set_voltage(struct regulator_dev *rdev,
|
|
int min_uV, int max_uV,
|
|
unsigned *selector)
|
|
{
|
|
struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
|
|
int reg = ldo->base + WM831X_LDO_ON_CONTROL;
|
|
|
|
return wm831x_gp_ldo_set_voltage_int(rdev, reg, min_uV, max_uV,
|
|
selector);
|
|
}
|
|
|
|
static int wm831x_gp_ldo_set_suspend_voltage(struct regulator_dev *rdev,
|
|
int uV)
|
|
{
|
|
struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
|
|
int reg = ldo->base + WM831X_LDO_SLEEP_CONTROL;
|
|
unsigned int selector;
|
|
|
|
return wm831x_gp_ldo_set_voltage_int(rdev, reg, uV, uV, &selector);
|
|
}
|
|
|
|
static int wm831x_gp_ldo_get_voltage_sel(struct regulator_dev *rdev)
|
|
{
|
|
struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
|
|
struct wm831x *wm831x = ldo->wm831x;
|
|
int reg = ldo->base + WM831X_LDO_ON_CONTROL;
|
|
int ret;
|
|
|
|
ret = wm831x_reg_read(wm831x, reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret &= WM831X_LDO1_ON_VSEL_MASK;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static unsigned int wm831x_gp_ldo_get_mode(struct regulator_dev *rdev)
|
|
{
|
|
struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
|
|
struct wm831x *wm831x = ldo->wm831x;
|
|
int ctrl_reg = ldo->base + WM831X_LDO_CONTROL;
|
|
int on_reg = ldo->base + WM831X_LDO_ON_CONTROL;
|
|
int ret;
|
|
|
|
ret = wm831x_reg_read(wm831x, on_reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (!(ret & WM831X_LDO1_ON_MODE))
|
|
return REGULATOR_MODE_NORMAL;
|
|
|
|
ret = wm831x_reg_read(wm831x, ctrl_reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (ret & WM831X_LDO1_LP_MODE)
|
|
return REGULATOR_MODE_STANDBY;
|
|
else
|
|
return REGULATOR_MODE_IDLE;
|
|
}
|
|
|
|
static int wm831x_gp_ldo_set_mode(struct regulator_dev *rdev,
|
|
unsigned int mode)
|
|
{
|
|
struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
|
|
struct wm831x *wm831x = ldo->wm831x;
|
|
int ctrl_reg = ldo->base + WM831X_LDO_CONTROL;
|
|
int on_reg = ldo->base + WM831X_LDO_ON_CONTROL;
|
|
int ret;
|
|
|
|
|
|
switch (mode) {
|
|
case REGULATOR_MODE_NORMAL:
|
|
ret = wm831x_set_bits(wm831x, on_reg,
|
|
WM831X_LDO1_ON_MODE, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
break;
|
|
|
|
case REGULATOR_MODE_IDLE:
|
|
ret = wm831x_set_bits(wm831x, ctrl_reg,
|
|
WM831X_LDO1_LP_MODE, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = wm831x_set_bits(wm831x, on_reg,
|
|
WM831X_LDO1_ON_MODE,
|
|
WM831X_LDO1_ON_MODE);
|
|
if (ret < 0)
|
|
return ret;
|
|
break;
|
|
|
|
case REGULATOR_MODE_STANDBY:
|
|
ret = wm831x_set_bits(wm831x, ctrl_reg,
|
|
WM831X_LDO1_LP_MODE,
|
|
WM831X_LDO1_LP_MODE);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = wm831x_set_bits(wm831x, on_reg,
|
|
WM831X_LDO1_ON_MODE,
|
|
WM831X_LDO1_ON_MODE);
|
|
if (ret < 0)
|
|
return ret;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm831x_gp_ldo_get_status(struct regulator_dev *rdev)
|
|
{
|
|
struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
|
|
struct wm831x *wm831x = ldo->wm831x;
|
|
int mask = 1 << rdev_get_id(rdev);
|
|
int ret;
|
|
|
|
/* Is the regulator on? */
|
|
ret = wm831x_reg_read(wm831x, WM831X_LDO_STATUS);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (!(ret & mask))
|
|
return REGULATOR_STATUS_OFF;
|
|
|
|
/* Is it reporting under voltage? */
|
|
ret = wm831x_reg_read(wm831x, WM831X_LDO_UV_STATUS);
|
|
if (ret & mask)
|
|
return REGULATOR_STATUS_ERROR;
|
|
|
|
ret = wm831x_gp_ldo_get_mode(rdev);
|
|
if (ret < 0)
|
|
return ret;
|
|
else
|
|
return regulator_mode_to_status(ret);
|
|
}
|
|
|
|
static unsigned int wm831x_gp_ldo_get_optimum_mode(struct regulator_dev *rdev,
|
|
int input_uV,
|
|
int output_uV, int load_uA)
|
|
{
|
|
if (load_uA < 20000)
|
|
return REGULATOR_MODE_STANDBY;
|
|
if (load_uA < 50000)
|
|
return REGULATOR_MODE_IDLE;
|
|
return REGULATOR_MODE_NORMAL;
|
|
}
|
|
|
|
|
|
static struct regulator_ops wm831x_gp_ldo_ops = {
|
|
.list_voltage = wm831x_gp_ldo_list_voltage,
|
|
.get_voltage_sel = wm831x_gp_ldo_get_voltage_sel,
|
|
.set_voltage = wm831x_gp_ldo_set_voltage,
|
|
.set_suspend_voltage = wm831x_gp_ldo_set_suspend_voltage,
|
|
.get_mode = wm831x_gp_ldo_get_mode,
|
|
.set_mode = wm831x_gp_ldo_set_mode,
|
|
.get_status = wm831x_gp_ldo_get_status,
|
|
.get_optimum_mode = wm831x_gp_ldo_get_optimum_mode,
|
|
|
|
.is_enabled = wm831x_ldo_is_enabled,
|
|
.enable = wm831x_ldo_enable,
|
|
.disable = wm831x_ldo_disable,
|
|
};
|
|
|
|
static __devinit int wm831x_gp_ldo_probe(struct platform_device *pdev)
|
|
{
|
|
struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
|
|
struct wm831x_pdata *pdata = wm831x->dev->platform_data;
|
|
int id;
|
|
struct wm831x_ldo *ldo;
|
|
struct resource *res;
|
|
int ret, irq;
|
|
|
|
if (pdata && pdata->wm831x_num)
|
|
id = (pdata->wm831x_num * 10) + 1;
|
|
else
|
|
id = 0;
|
|
id = pdev->id - id;
|
|
|
|
dev_dbg(&pdev->dev, "Probing LDO%d\n", id + 1);
|
|
|
|
if (pdata == NULL || pdata->ldo[id] == NULL)
|
|
return -ENODEV;
|
|
|
|
ldo = devm_kzalloc(&pdev->dev, sizeof(struct wm831x_ldo), GFP_KERNEL);
|
|
if (ldo == NULL) {
|
|
dev_err(&pdev->dev, "Unable to allocate private data\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
ldo->wm831x = wm831x;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
|
|
if (res == NULL) {
|
|
dev_err(&pdev->dev, "No I/O resource\n");
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
ldo->base = res->start;
|
|
|
|
snprintf(ldo->name, sizeof(ldo->name), "LDO%d", id + 1);
|
|
ldo->desc.name = ldo->name;
|
|
ldo->desc.id = id;
|
|
ldo->desc.type = REGULATOR_VOLTAGE;
|
|
ldo->desc.n_voltages = WM831X_GP_LDO_MAX_SELECTOR + 1;
|
|
ldo->desc.ops = &wm831x_gp_ldo_ops;
|
|
ldo->desc.owner = THIS_MODULE;
|
|
|
|
ldo->regulator = regulator_register(&ldo->desc, &pdev->dev,
|
|
pdata->ldo[id], ldo, NULL);
|
|
if (IS_ERR(ldo->regulator)) {
|
|
ret = PTR_ERR(ldo->regulator);
|
|
dev_err(wm831x->dev, "Failed to register LDO%d: %d\n",
|
|
id + 1, ret);
|
|
goto err;
|
|
}
|
|
|
|
irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "UV"));
|
|
ret = request_threaded_irq(irq, NULL, wm831x_ldo_uv_irq,
|
|
IRQF_TRIGGER_RISING, ldo->name,
|
|
ldo);
|
|
if (ret != 0) {
|
|
dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
|
|
irq, ret);
|
|
goto err_regulator;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, ldo);
|
|
|
|
return 0;
|
|
|
|
err_regulator:
|
|
regulator_unregister(ldo->regulator);
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static __devexit int wm831x_gp_ldo_remove(struct platform_device *pdev)
|
|
{
|
|
struct wm831x_ldo *ldo = platform_get_drvdata(pdev);
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
free_irq(wm831x_irq(ldo->wm831x,
|
|
platform_get_irq_byname(pdev, "UV")), ldo);
|
|
regulator_unregister(ldo->regulator);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver wm831x_gp_ldo_driver = {
|
|
.probe = wm831x_gp_ldo_probe,
|
|
.remove = __devexit_p(wm831x_gp_ldo_remove),
|
|
.driver = {
|
|
.name = "wm831x-ldo",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
/*
|
|
* Analogue LDOs
|
|
*/
|
|
|
|
|
|
#define WM831X_ALDO_SELECTOR_LOW 0xc
|
|
#define WM831X_ALDO_MAX_SELECTOR 0x1f
|
|
|
|
static int wm831x_aldo_list_voltage(struct regulator_dev *rdev,
|
|
unsigned int selector)
|
|
{
|
|
/* 1-1.6V in 50mV steps */
|
|
if (selector <= WM831X_ALDO_SELECTOR_LOW)
|
|
return 1000000 + (selector * 50000);
|
|
/* 1.7-3.5V in 50mV steps */
|
|
if (selector <= WM831X_ALDO_MAX_SELECTOR)
|
|
return 1600000 + ((selector - WM831X_ALDO_SELECTOR_LOW)
|
|
* 100000);
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int wm831x_aldo_set_voltage_int(struct regulator_dev *rdev, int reg,
|
|
int min_uV, int max_uV,
|
|
unsigned *selector)
|
|
{
|
|
struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
|
|
struct wm831x *wm831x = ldo->wm831x;
|
|
int vsel, ret;
|
|
|
|
if (min_uV < 1000000)
|
|
vsel = 0;
|
|
else if (min_uV < 1700000)
|
|
vsel = ((min_uV - 1000000) / 50000);
|
|
else
|
|
vsel = ((min_uV - 1700000) / 100000)
|
|
+ WM831X_ALDO_SELECTOR_LOW + 1;
|
|
|
|
ret = wm831x_aldo_list_voltage(rdev, vsel);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (ret < min_uV || ret > max_uV)
|
|
return -EINVAL;
|
|
|
|
*selector = vsel;
|
|
|
|
return wm831x_set_bits(wm831x, reg, WM831X_LDO7_ON_VSEL_MASK, vsel);
|
|
}
|
|
|
|
static int wm831x_aldo_set_voltage(struct regulator_dev *rdev,
|
|
int min_uV, int max_uV, unsigned *selector)
|
|
{
|
|
struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
|
|
int reg = ldo->base + WM831X_LDO_ON_CONTROL;
|
|
|
|
return wm831x_aldo_set_voltage_int(rdev, reg, min_uV, max_uV,
|
|
selector);
|
|
}
|
|
|
|
static int wm831x_aldo_set_suspend_voltage(struct regulator_dev *rdev,
|
|
int uV)
|
|
{
|
|
struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
|
|
int reg = ldo->base + WM831X_LDO_SLEEP_CONTROL;
|
|
unsigned int selector;
|
|
|
|
return wm831x_aldo_set_voltage_int(rdev, reg, uV, uV, &selector);
|
|
}
|
|
|
|
static int wm831x_aldo_get_voltage_sel(struct regulator_dev *rdev)
|
|
{
|
|
struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
|
|
struct wm831x *wm831x = ldo->wm831x;
|
|
int reg = ldo->base + WM831X_LDO_ON_CONTROL;
|
|
int ret;
|
|
|
|
ret = wm831x_reg_read(wm831x, reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret &= WM831X_LDO7_ON_VSEL_MASK;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static unsigned int wm831x_aldo_get_mode(struct regulator_dev *rdev)
|
|
{
|
|
struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
|
|
struct wm831x *wm831x = ldo->wm831x;
|
|
int on_reg = ldo->base + WM831X_LDO_ON_CONTROL;
|
|
int ret;
|
|
|
|
ret = wm831x_reg_read(wm831x, on_reg);
|
|
if (ret < 0)
|
|
return 0;
|
|
|
|
if (ret & WM831X_LDO7_ON_MODE)
|
|
return REGULATOR_MODE_IDLE;
|
|
else
|
|
return REGULATOR_MODE_NORMAL;
|
|
}
|
|
|
|
static int wm831x_aldo_set_mode(struct regulator_dev *rdev,
|
|
unsigned int mode)
|
|
{
|
|
struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
|
|
struct wm831x *wm831x = ldo->wm831x;
|
|
int on_reg = ldo->base + WM831X_LDO_ON_CONTROL;
|
|
int ret;
|
|
|
|
|
|
switch (mode) {
|
|
case REGULATOR_MODE_NORMAL:
|
|
ret = wm831x_set_bits(wm831x, on_reg, WM831X_LDO7_ON_MODE, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
break;
|
|
|
|
case REGULATOR_MODE_IDLE:
|
|
ret = wm831x_set_bits(wm831x, on_reg, WM831X_LDO7_ON_MODE,
|
|
WM831X_LDO7_ON_MODE);
|
|
if (ret < 0)
|
|
return ret;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm831x_aldo_get_status(struct regulator_dev *rdev)
|
|
{
|
|
struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
|
|
struct wm831x *wm831x = ldo->wm831x;
|
|
int mask = 1 << rdev_get_id(rdev);
|
|
int ret;
|
|
|
|
/* Is the regulator on? */
|
|
ret = wm831x_reg_read(wm831x, WM831X_LDO_STATUS);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (!(ret & mask))
|
|
return REGULATOR_STATUS_OFF;
|
|
|
|
/* Is it reporting under voltage? */
|
|
ret = wm831x_reg_read(wm831x, WM831X_LDO_UV_STATUS);
|
|
if (ret & mask)
|
|
return REGULATOR_STATUS_ERROR;
|
|
|
|
ret = wm831x_aldo_get_mode(rdev);
|
|
if (ret < 0)
|
|
return ret;
|
|
else
|
|
return regulator_mode_to_status(ret);
|
|
}
|
|
|
|
static struct regulator_ops wm831x_aldo_ops = {
|
|
.list_voltage = wm831x_aldo_list_voltage,
|
|
.get_voltage_sel = wm831x_aldo_get_voltage_sel,
|
|
.set_voltage = wm831x_aldo_set_voltage,
|
|
.set_suspend_voltage = wm831x_aldo_set_suspend_voltage,
|
|
.get_mode = wm831x_aldo_get_mode,
|
|
.set_mode = wm831x_aldo_set_mode,
|
|
.get_status = wm831x_aldo_get_status,
|
|
|
|
.is_enabled = wm831x_ldo_is_enabled,
|
|
.enable = wm831x_ldo_enable,
|
|
.disable = wm831x_ldo_disable,
|
|
};
|
|
|
|
static __devinit int wm831x_aldo_probe(struct platform_device *pdev)
|
|
{
|
|
struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
|
|
struct wm831x_pdata *pdata = wm831x->dev->platform_data;
|
|
int id;
|
|
struct wm831x_ldo *ldo;
|
|
struct resource *res;
|
|
int ret, irq;
|
|
|
|
if (pdata && pdata->wm831x_num)
|
|
id = (pdata->wm831x_num * 10) + 1;
|
|
else
|
|
id = 0;
|
|
id = pdev->id - id;
|
|
|
|
dev_dbg(&pdev->dev, "Probing LDO%d\n", id + 1);
|
|
|
|
if (pdata == NULL || pdata->ldo[id] == NULL)
|
|
return -ENODEV;
|
|
|
|
ldo = devm_kzalloc(&pdev->dev, sizeof(struct wm831x_ldo), GFP_KERNEL);
|
|
if (ldo == NULL) {
|
|
dev_err(&pdev->dev, "Unable to allocate private data\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
ldo->wm831x = wm831x;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
|
|
if (res == NULL) {
|
|
dev_err(&pdev->dev, "No I/O resource\n");
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
ldo->base = res->start;
|
|
|
|
snprintf(ldo->name, sizeof(ldo->name), "LDO%d", id + 1);
|
|
ldo->desc.name = ldo->name;
|
|
ldo->desc.id = id;
|
|
ldo->desc.type = REGULATOR_VOLTAGE;
|
|
ldo->desc.n_voltages = WM831X_ALDO_MAX_SELECTOR + 1;
|
|
ldo->desc.ops = &wm831x_aldo_ops;
|
|
ldo->desc.owner = THIS_MODULE;
|
|
|
|
ldo->regulator = regulator_register(&ldo->desc, &pdev->dev,
|
|
pdata->ldo[id], ldo, NULL);
|
|
if (IS_ERR(ldo->regulator)) {
|
|
ret = PTR_ERR(ldo->regulator);
|
|
dev_err(wm831x->dev, "Failed to register LDO%d: %d\n",
|
|
id + 1, ret);
|
|
goto err;
|
|
}
|
|
|
|
irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "UV"));
|
|
ret = request_threaded_irq(irq, NULL, wm831x_ldo_uv_irq,
|
|
IRQF_TRIGGER_RISING, ldo->name, ldo);
|
|
if (ret != 0) {
|
|
dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
|
|
irq, ret);
|
|
goto err_regulator;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, ldo);
|
|
|
|
return 0;
|
|
|
|
err_regulator:
|
|
regulator_unregister(ldo->regulator);
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static __devexit int wm831x_aldo_remove(struct platform_device *pdev)
|
|
{
|
|
struct wm831x_ldo *ldo = platform_get_drvdata(pdev);
|
|
|
|
free_irq(wm831x_irq(ldo->wm831x, platform_get_irq_byname(pdev, "UV")),
|
|
ldo);
|
|
regulator_unregister(ldo->regulator);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver wm831x_aldo_driver = {
|
|
.probe = wm831x_aldo_probe,
|
|
.remove = __devexit_p(wm831x_aldo_remove),
|
|
.driver = {
|
|
.name = "wm831x-aldo",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
/*
|
|
* Alive LDO
|
|
*/
|
|
|
|
#define WM831X_ALIVE_LDO_MAX_SELECTOR 0xf
|
|
|
|
static int wm831x_alive_ldo_list_voltage(struct regulator_dev *rdev,
|
|
unsigned int selector)
|
|
{
|
|
/* 0.8-1.55V in 50mV steps */
|
|
if (selector <= WM831X_ALIVE_LDO_MAX_SELECTOR)
|
|
return 800000 + (selector * 50000);
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int wm831x_alive_ldo_set_voltage_int(struct regulator_dev *rdev,
|
|
int reg,
|
|
int min_uV, int max_uV,
|
|
unsigned *selector)
|
|
{
|
|
struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
|
|
struct wm831x *wm831x = ldo->wm831x;
|
|
int vsel, ret;
|
|
|
|
vsel = (min_uV - 800000) / 50000;
|
|
|
|
ret = wm831x_alive_ldo_list_voltage(rdev, vsel);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (ret < min_uV || ret > max_uV)
|
|
return -EINVAL;
|
|
|
|
*selector = vsel;
|
|
|
|
return wm831x_set_bits(wm831x, reg, WM831X_LDO11_ON_VSEL_MASK, vsel);
|
|
}
|
|
|
|
static int wm831x_alive_ldo_set_voltage(struct regulator_dev *rdev,
|
|
int min_uV, int max_uV,
|
|
unsigned *selector)
|
|
{
|
|
struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
|
|
int reg = ldo->base + WM831X_ALIVE_LDO_ON_CONTROL;
|
|
|
|
return wm831x_alive_ldo_set_voltage_int(rdev, reg, min_uV, max_uV,
|
|
selector);
|
|
}
|
|
|
|
static int wm831x_alive_ldo_set_suspend_voltage(struct regulator_dev *rdev,
|
|
int uV)
|
|
{
|
|
struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
|
|
int reg = ldo->base + WM831X_ALIVE_LDO_SLEEP_CONTROL;
|
|
unsigned selector;
|
|
|
|
return wm831x_alive_ldo_set_voltage_int(rdev, reg, uV, uV, &selector);
|
|
}
|
|
|
|
static int wm831x_alive_ldo_get_voltage_sel(struct regulator_dev *rdev)
|
|
{
|
|
struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
|
|
struct wm831x *wm831x = ldo->wm831x;
|
|
int reg = ldo->base + WM831X_ALIVE_LDO_ON_CONTROL;
|
|
int ret;
|
|
|
|
ret = wm831x_reg_read(wm831x, reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret &= WM831X_LDO11_ON_VSEL_MASK;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int wm831x_alive_ldo_get_status(struct regulator_dev *rdev)
|
|
{
|
|
struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
|
|
struct wm831x *wm831x = ldo->wm831x;
|
|
int mask = 1 << rdev_get_id(rdev);
|
|
int ret;
|
|
|
|
/* Is the regulator on? */
|
|
ret = wm831x_reg_read(wm831x, WM831X_LDO_STATUS);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (ret & mask)
|
|
return REGULATOR_STATUS_ON;
|
|
else
|
|
return REGULATOR_STATUS_OFF;
|
|
}
|
|
|
|
static struct regulator_ops wm831x_alive_ldo_ops = {
|
|
.list_voltage = wm831x_alive_ldo_list_voltage,
|
|
.get_voltage_sel = wm831x_alive_ldo_get_voltage_sel,
|
|
.set_voltage = wm831x_alive_ldo_set_voltage,
|
|
.set_suspend_voltage = wm831x_alive_ldo_set_suspend_voltage,
|
|
.get_status = wm831x_alive_ldo_get_status,
|
|
|
|
.is_enabled = wm831x_ldo_is_enabled,
|
|
.enable = wm831x_ldo_enable,
|
|
.disable = wm831x_ldo_disable,
|
|
};
|
|
|
|
static __devinit int wm831x_alive_ldo_probe(struct platform_device *pdev)
|
|
{
|
|
struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
|
|
struct wm831x_pdata *pdata = wm831x->dev->platform_data;
|
|
int id;
|
|
struct wm831x_ldo *ldo;
|
|
struct resource *res;
|
|
int ret;
|
|
|
|
if (pdata && pdata->wm831x_num)
|
|
id = (pdata->wm831x_num * 10) + 1;
|
|
else
|
|
id = 0;
|
|
id = pdev->id - id;
|
|
|
|
|
|
dev_dbg(&pdev->dev, "Probing LDO%d\n", id + 1);
|
|
|
|
if (pdata == NULL || pdata->ldo[id] == NULL)
|
|
return -ENODEV;
|
|
|
|
ldo = devm_kzalloc(&pdev->dev, sizeof(struct wm831x_ldo), GFP_KERNEL);
|
|
if (ldo == NULL) {
|
|
dev_err(&pdev->dev, "Unable to allocate private data\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
ldo->wm831x = wm831x;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
|
|
if (res == NULL) {
|
|
dev_err(&pdev->dev, "No I/O resource\n");
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
ldo->base = res->start;
|
|
|
|
snprintf(ldo->name, sizeof(ldo->name), "LDO%d", id + 1);
|
|
ldo->desc.name = ldo->name;
|
|
ldo->desc.id = id;
|
|
ldo->desc.type = REGULATOR_VOLTAGE;
|
|
ldo->desc.n_voltages = WM831X_ALIVE_LDO_MAX_SELECTOR + 1;
|
|
ldo->desc.ops = &wm831x_alive_ldo_ops;
|
|
ldo->desc.owner = THIS_MODULE;
|
|
|
|
ldo->regulator = regulator_register(&ldo->desc, &pdev->dev,
|
|
pdata->ldo[id], ldo, NULL);
|
|
if (IS_ERR(ldo->regulator)) {
|
|
ret = PTR_ERR(ldo->regulator);
|
|
dev_err(wm831x->dev, "Failed to register LDO%d: %d\n",
|
|
id + 1, ret);
|
|
goto err;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, ldo);
|
|
|
|
return 0;
|
|
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static __devexit int wm831x_alive_ldo_remove(struct platform_device *pdev)
|
|
{
|
|
struct wm831x_ldo *ldo = platform_get_drvdata(pdev);
|
|
|
|
regulator_unregister(ldo->regulator);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver wm831x_alive_ldo_driver = {
|
|
.probe = wm831x_alive_ldo_probe,
|
|
.remove = __devexit_p(wm831x_alive_ldo_remove),
|
|
.driver = {
|
|
.name = "wm831x-alive-ldo",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
static int __init wm831x_ldo_init(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = platform_driver_register(&wm831x_gp_ldo_driver);
|
|
if (ret != 0)
|
|
pr_err("Failed to register WM831x GP LDO driver: %d\n", ret);
|
|
|
|
ret = platform_driver_register(&wm831x_aldo_driver);
|
|
if (ret != 0)
|
|
pr_err("Failed to register WM831x ALDO driver: %d\n", ret);
|
|
|
|
ret = platform_driver_register(&wm831x_alive_ldo_driver);
|
|
if (ret != 0)
|
|
pr_err("Failed to register WM831x alive LDO driver: %d\n",
|
|
ret);
|
|
|
|
return 0;
|
|
}
|
|
subsys_initcall(wm831x_ldo_init);
|
|
|
|
static void __exit wm831x_ldo_exit(void)
|
|
{
|
|
platform_driver_unregister(&wm831x_alive_ldo_driver);
|
|
platform_driver_unregister(&wm831x_aldo_driver);
|
|
platform_driver_unregister(&wm831x_gp_ldo_driver);
|
|
}
|
|
module_exit(wm831x_ldo_exit);
|
|
|
|
/* Module information */
|
|
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
|
|
MODULE_DESCRIPTION("WM831x LDO driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:wm831x-ldo");
|
|
MODULE_ALIAS("platform:wm831x-aldo");
|
|
MODULE_ALIAS("platform:wm831x-aliveldo");
|