iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/drivers/iio/pressure
History
Petre Rodan 6362d96585 iio: pressure: driver for Honeywell HSC/SSC series 
Adds driver for digital Honeywell TruStability HSC and SSC series
pressure and temperature sensors.
Communication is one way. The sensor only requires 4 bytes worth of
clock pulses on both i2c and spi in order to push the data out.
The i2c address is hardcoded and depends on the part number.
There is no additional GPIO control.
code is now based on iio/togreg

Datasheet:
https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-hsc-series/documents/sps-siot-trustability-hsc-series-high-accuracy-board-mount-pressure-sensors-50099148-a-en-ciid-151133.pdf [HSC]
Datasheet:
https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-ssc-series/documents/sps-siot-trustability-ssc-series-standard-accuracy-board-mount-pressure-sensors-50099533-a-en-ciid-151134.pdf [SSC]

Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231207164634.11998-2-petre.rodan@subdimension.ro
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-11 19:16:35 +00:00
..
abp060mg.c
iio: Switch i2c drivers back to use .probe()
2023-05-21 18:54:53 +01:00
bmp280-core.c
iio: pressure: bmp280: Add support for BMP390
2023-11-16 19:10:27 +00:00
bmp280-i2c.c
iio: pressure: bmp280: Rearrange vars in reverse xmas tree order
2023-11-16 19:10:27 +00:00
bmp280-regmap.c
iio: pressure: bmp280: Add support for new sensor BMP580
2023-03-11 12:18:29 +00:00
bmp280-spi.c
iio: pressure: bmp280: Rearrange vars in reverse xmas tree order
2023-11-16 19:10:27 +00:00
bmp280.h
iio: pressure: bmp280: Add support for BMP390
2023-11-16 19:10:27 +00:00
cros_ec_baro.c
iio: cros: Register FIFO callback after sensor is registered
2022-07-18 18:29:13 +01:00
dlhl60d.c
iio: Switch i2c drivers back to use .probe()
2023-05-21 18:54:53 +01:00
dps310.c
iio: pressure: dps310: Adjust Timeout Settings
2023-10-05 18:06:45 +01:00
hid-sensor-press.c
iio: pressure: hid-sensor: Convert to platform remove callback returning void
2023-09-23 15:06:56 +01:00
hp03.c
iio: Switch i2c drivers back to use .probe()
2023-05-21 18:54:53 +01:00
hp206c.c
iio: Switch i2c drivers back to use .probe()
2023-05-21 18:54:53 +01:00
hsc030pa_i2c.c
iio: pressure: driver for Honeywell HSC/SSC series
2023-12-11 19:16:35 +00:00
hsc030pa_spi.c
iio: pressure: driver for Honeywell HSC/SSC series
2023-12-11 19:16:35 +00:00
hsc030pa.c
iio: pressure: driver for Honeywell HSC/SSC series
2023-12-11 19:16:35 +00:00
hsc030pa.h
iio: pressure: driver for Honeywell HSC/SSC series
2023-12-11 19:16:35 +00:00
icp10100.c
iio: Switch i2c drivers back to use .probe()
2023-05-21 18:54:53 +01:00
Kconfig
iio: pressure: driver for Honeywell HSC/SSC series
2023-12-11 19:16:35 +00:00
Makefile
iio: pressure: driver for Honeywell HSC/SSC series
2023-12-11 19:16:35 +00:00
mpl115_i2c.c
iio: Switch i2c drivers back to use .probe()
2023-05-21 18:54:53 +01:00
mpl115_spi.c
iio: pressure: mpl115: Implementing low power mode by shutdown gpio
2022-11-23 19:44:00 +00:00
mpl115.c
iio: pressure: mpl115: Implementing low power mode by shutdown gpio
2022-11-23 19:44:00 +00:00
mpl115.h
iio: pressure: mpl115: Implementing low power mode by shutdown gpio
2022-11-23 19:44:00 +00:00
mpl3115.c
iio: Switch i2c drivers back to use .probe()
2023-05-21 18:54:53 +01:00
mprls0025pa.c
iio: pressure: Honeywell mprls0025pa pressure sensor
2023-05-21 18:54:58 +01:00
ms5611_core.c
iio: pressure: ms5611: ms5611_prom_is_valid false negative bug
2023-10-05 18:06:46 +01:00
ms5611_i2c.c
iio: Switch i2c drivers back to use .probe()
2023-05-21 18:54:53 +01:00
ms5611_spi.c
iio: pressure: ms5611: Switch to fully devm_ managed registration.
2022-12-28 17:19:45 +00:00
ms5611.h
iio: pressure: ms5611: Switch to fully devm_ managed registration.
2022-12-28 17:19:45 +00:00
ms5637.c
iio: pressure: ms5637: Use i2c_get_match_data()
2023-09-12 10:42:04 +01:00
rohm-bm1390.c
iio: pressure: Support ROHM BU1390
2023-10-05 14:44:06 +01:00
st_pressure_buffer.c
iio:st-sensors: Remove duplicate MODULE_*
2022-02-18 11:36:54 +00:00
st_pressure_core.c
iio: pressure: st_pressure: Add support for LPS22DF
2022-09-21 18:42:53 +01:00
st_pressure_i2c.c
iio: Switch i2c drivers back to use .probe()
2023-05-21 18:54:53 +01:00
st_pressure_spi.c
iio: pressure: st_pressure: Add support for LPS22DF
2022-09-21 18:42:53 +01:00
st_pressure.h
iio: pressure: st_pressure: Add support for LPS22DF
2022-09-21 18:42:53 +01:00
t5403.c
iio: Switch i2c drivers back to use .probe()
2023-05-21 18:54:53 +01:00
zpa2326_i2c.c
iio: Switch i2c drivers back to use .probe()
2023-05-21 18:54:53 +01:00
zpa2326_spi.c
Char/Misc and other driver updates for 5.18-rc1
2022-03-28 12:27:35 -07:00
zpa2326.c
iio: Rename iio_trigger_poll_chained and add kernel-doc
2023-03-11 12:18:29 +00:00
zpa2326.h
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174
2019-05-30 11:26:41 -07:00