52a2f06083
LED Select (LED_SEL) bit in the LED General Purpose IO Configuration
register is used to determine the functionality of external LED pins
(Speed Indicator, Link and Activity Indicator, Full Duplex Link
Indicator). The default value for this bit is 0 when no EEPROM is
present. If a EEPROM is present, the default value is the value of the
LED Select bit in the Configuration Flags of the EEPROM. A USB Reset or
Lite Reset (LRST) will cause this bit to be restored to the image value
last loaded from EEPROM, or to be set to 0 if no EEPROM is present.
While configuring the dual purpose GPIO/LED pins to LED outputs in the
LED General Purpose IO Configuration register, the LED_SEL bit is changed
as 0 and resulting the configured value from the EEPROM is cleared. The
issue is fixed by using read-modify-write approach.
Fixes:
|
||
|---|---|---|
| .. | ||
| aqc111.c | ||
| aqc111.h | ||
| asix_common.c | ||
| asix_devices.c | ||
| asix.h | ||
| ax88172a.c | ||
| ax88179_178a.c | ||
| catc.c | ||
| cdc_eem.c | ||
| cdc_ether.c | ||
| cdc_mbim.c | ||
| cdc_ncm.c | ||
| cdc_subset.c | ||
| cdc-phonet.c | ||
| ch9200.c | ||
| cx82310_eth.c | ||
| dm9601.c | ||
| gl620a.c | ||
| hso.c | ||
| huawei_cdc_ncm.c | ||
| int51x1.c | ||
| ipheth.c | ||
| kalmia.c | ||
| kaweth.c | ||
| Kconfig | ||
| lan78xx.c | ||
| lan78xx.h | ||
| lg-vl600.c | ||
| Makefile | ||
| mcs7830.c | ||
| net1080.c | ||
| pegasus.c | ||
| pegasus.h | ||
| plusb.c | ||
| qmi_wwan.c | ||
| r8152.c | ||
| r8153_ecm.c | ||
| rndis_host.c | ||
| rtl8150.c | ||
| sierra_net.c | ||
| smsc75xx.c | ||
| smsc75xx.h | ||
| smsc95xx.c | ||
| smsc95xx.h | ||
| sr9700.c | ||
| sr9700.h | ||
| sr9800.c | ||
| sr9800.h | ||
| usbnet.c | ||
| zaurus.c | ||