linux/drivers/usb
Bin Liu 249a32b7ee usb: core: handle hub C_PORT_OVER_CURRENT condition
Based on USB2.0 Spec Section 11.12.5,

  "If a hub has per-port power switching and per-port current limiting,
  an over-current on one port may still cause the power on another port
  to fall below specific minimums. In this case, the affected port is
  placed in the Power-Off state and C_PORT_OVER_CURRENT is set for the
  port, but PORT_OVER_CURRENT is not set."

so let's check C_PORT_OVER_CURRENT too for over current condition.

Fixes: 08d1dec6f4 ("usb:hub set hub->change_bits when over-current happens")
Cc: <stable@vger.kernel.org>
Tested-by: Alessandro Antenucci <antenucci@korg.it>
Signed-off-by: Bin Liu <b-liu@ti.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-21 08:38:29 +02:00
..
atm
c67x00
chipidea usb: chipidea: Always build ULPI code 2018-07-05 14:22:47 +08:00
class usb: cdc_acm: Add quirk for Castles VEGA3000 2018-07-16 09:26:41 +02:00
common usb: common: Small class for USB role switches 2018-03-22 13:40:10 +01:00
core usb: core: handle hub C_PORT_OVER_CURRENT condition 2018-07-21 08:38:29 +02:00
dwc2 usb: dwc2: Fix inefficient copy of unaligned buffers 2018-07-17 10:12:52 +03:00
dwc3 usb: dwc3: gadget: remove redundant variable maxpacket 2018-07-17 10:12:51 +03:00
early
gadget usb: gadget: f_fs: Only return delayed status when len is 0 2018-07-20 16:02:49 +02:00
host usb: xhci: Fix memory leak in xhci_endpoint_reset() 2018-07-20 17:17:21 +02:00
image
isp1760 usb: isp1760: Replace mdelay with msleep in isp1760_stop 2018-04-22 15:49:42 +02:00
misc USB: yurex: fix out-of-bounds uaccess in read handler 2018-07-06 17:21:34 +02:00
mon treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
mtu3 USB: mtu3: no need to check return value of debugfs_create_dir() 2018-05-31 12:54:21 +02:00
musb USB: musb: clean up debugfs file and directory creation 2018-05-31 12:54:21 +02:00
phy usb/phy: fix PPC64 build errors in phy-fsl-usb.c 2018-07-17 10:12:51 +03:00
renesas_usbhs treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
roles usb: roles: intel_xhci: Enable runtime PM 2018-05-24 18:17:00 +02:00
serial USB: serial: mos7840: fix status-register error handling 2018-07-06 10:32:28 +02:00
storage treewide: kmalloc() -> kmalloc_array() 2018-06-12 16:19:22 -07:00
typec usb: typec: tcpm: Fix sink PDO starting index for PPS APDO selection 2018-07-20 16:40:04 +02:00
usbip usbip: vhci_sysfs: fix potential Spectre v1 2018-05-24 18:14:28 +02:00
wusbcore treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
Kconfig usb: select USB_COMMON for usb role switch config 2018-04-22 15:23:37 +02:00
Makefile usb: roles: Add Intel xHCI USB role switch driver 2018-03-22 13:49:27 +01:00
README
usb-skeleton.c usb: usb-skeleton: make MODULE_LICENSE and SPDX tag match 2018-03-06 09:42:07 -08:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.