9171dfcda4
When FW_LOADER is disabled, cxl fails to link:
arm-linux-gnueabi-ld: drivers/cxl/core/memdev.o: in function `cxl_memdev_setup_fw_upload':
memdev.c:(.text+0x90e): undefined reference to `firmware_upload_register'
memdev.c:(.text+0x93c): undefined reference to `firmware_upload_unregister'
In order to use the firmware_upload_register() function, both FW_LOADER
and FW_UPLOAD have to be enabled, which is a bit confusing. In addition,
the dependency is on the wrong symbol, as the caller is part of the
cxl_core.ko module, not the cxl_mem.ko module.
Fixes: 9521875bbe ("cxl: add a firmware update mechanism using the sysfs firmware loader")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230703112928.332321-1-arnd@kernel.org
Reviewed-by: Xiao Yang <yangx.jy@fujitsu.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
158 lines
5.8 KiB
Plaintext
158 lines
5.8 KiB
Plaintext
# SPDX-License-Identifier: GPL-2.0-only
|
|
menuconfig CXL_BUS
|
|
tristate "CXL (Compute Express Link) Devices Support"
|
|
depends on PCI
|
|
select FW_LOADER
|
|
select FW_UPLOAD
|
|
select PCI_DOE
|
|
help
|
|
CXL is a bus that is electrically compatible with PCI Express, but
|
|
layers three protocols on that signalling (CXL.io, CXL.cache, and
|
|
CXL.mem). The CXL.cache protocol allows devices to hold cachelines
|
|
locally, the CXL.mem protocol allows devices to be fully coherent
|
|
memory targets, the CXL.io protocol is equivalent to PCI Express.
|
|
Say 'y' to enable support for the configuration and management of
|
|
devices supporting these protocols.
|
|
|
|
if CXL_BUS
|
|
|
|
config CXL_PCI
|
|
tristate "PCI manageability"
|
|
default CXL_BUS
|
|
help
|
|
The CXL specification defines a "CXL memory device" sub-class in the
|
|
PCI "memory controller" base class of devices. Device's identified by
|
|
this class code provide support for volatile and / or persistent
|
|
memory to be mapped into the system address map (Host-managed Device
|
|
Memory (HDM)).
|
|
|
|
Say 'y/m' to enable a driver that will attach to CXL memory expander
|
|
devices enumerated by the memory device class code for configuration
|
|
and management primarily via the mailbox interface. See Chapter 2.3
|
|
Type 3 CXL Device in the CXL 2.0 specification for more details.
|
|
|
|
If unsure say 'm'.
|
|
|
|
config CXL_MEM_RAW_COMMANDS
|
|
bool "RAW Command Interface for Memory Devices"
|
|
depends on CXL_PCI
|
|
help
|
|
Enable CXL RAW command interface.
|
|
|
|
The CXL driver ioctl interface may assign a kernel ioctl command
|
|
number for each specification defined opcode. At any given point in
|
|
time the number of opcodes that the specification defines and a device
|
|
may implement may exceed the kernel's set of associated ioctl function
|
|
numbers. The mismatch is either by omission, specification is too new,
|
|
or by design. When prototyping new hardware, or developing / debugging
|
|
the driver it is useful to be able to submit any possible command to
|
|
the hardware, even commands that may crash the kernel due to their
|
|
potential impact to memory currently in use by the kernel.
|
|
|
|
If developing CXL hardware or the driver say Y, otherwise say N.
|
|
|
|
config CXL_ACPI
|
|
tristate "CXL ACPI: Platform Support"
|
|
depends on ACPI
|
|
default CXL_BUS
|
|
select ACPI_TABLE_LIB
|
|
help
|
|
Enable support for host managed device memory (HDM) resources
|
|
published by a platform's ACPI CXL memory layout description. See
|
|
Chapter 9.14.1 CXL Early Discovery Table (CEDT) in the CXL 2.0
|
|
specification, and CXL Fixed Memory Window Structures (CEDT.CFMWS)
|
|
(https://www.computeexpresslink.org/spec-landing). The CXL core
|
|
consumes these resource to publish the root of a cxl_port decode
|
|
hierarchy to map regions that represent System RAM, or Persistent
|
|
Memory regions to be managed by LIBNVDIMM.
|
|
|
|
If unsure say 'm'.
|
|
|
|
config CXL_PMEM
|
|
tristate "CXL PMEM: Persistent Memory Support"
|
|
depends on LIBNVDIMM
|
|
default CXL_BUS
|
|
help
|
|
In addition to typical memory resources a platform may also advertise
|
|
support for persistent memory attached via CXL. This support is
|
|
managed via a bridge driver from CXL to the LIBNVDIMM system
|
|
subsystem. Say 'y/m' to enable support for enumerating and
|
|
provisioning the persistent memory capacity of CXL memory expanders.
|
|
|
|
If unsure say 'm'.
|
|
|
|
config CXL_MEM
|
|
tristate "CXL: Memory Expansion"
|
|
depends on CXL_PCI
|
|
default CXL_BUS
|
|
help
|
|
The CXL.mem protocol allows a device to act as a provider of "System
|
|
RAM" and/or "Persistent Memory" that is fully coherent as if the
|
|
memory were attached to the typical CPU memory controller. This is
|
|
known as HDM "Host-managed Device Memory".
|
|
|
|
Say 'y/m' to enable a driver that will attach to CXL.mem devices for
|
|
memory expansion and control of HDM. See Chapter 9.13 in the CXL 2.0
|
|
specification for a detailed description of HDM.
|
|
|
|
If unsure say 'm'.
|
|
|
|
config CXL_PORT
|
|
default CXL_BUS
|
|
tristate
|
|
|
|
config CXL_SUSPEND
|
|
def_bool y
|
|
depends on SUSPEND && CXL_MEM
|
|
|
|
config CXL_REGION
|
|
bool "CXL: Region Support"
|
|
default CXL_BUS
|
|
# For MAX_PHYSMEM_BITS
|
|
depends on SPARSEMEM
|
|
select MEMREGION
|
|
select GET_FREE_REGION
|
|
help
|
|
Enable the CXL core to enumerate and provision CXL regions. A CXL
|
|
region is defined by one or more CXL expanders that decode a given
|
|
system-physical address range. For CXL regions established by
|
|
platform-firmware this option enables memory error handling to
|
|
identify the devices participating in a given interleaved memory
|
|
range. Otherwise, platform-firmware managed CXL is enabled by being
|
|
placed in the system address map and does not need a driver.
|
|
|
|
If unsure say 'y'
|
|
|
|
config CXL_REGION_INVALIDATION_TEST
|
|
bool "CXL: Region Cache Management Bypass (TEST)"
|
|
depends on CXL_REGION
|
|
help
|
|
CXL Region management and security operations potentially invalidate
|
|
the content of CPU caches without notifying those caches to
|
|
invalidate the affected cachelines. The CXL Region driver attempts
|
|
to invalidate caches when those events occur. If that invalidation
|
|
fails the region will fail to enable. Reasons for cache
|
|
invalidation failure are due to the CPU not providing a cache
|
|
invalidation mechanism. For example usage of wbinvd is restricted to
|
|
bare metal x86. However, for testing purposes toggling this option
|
|
can disable that data integrity safety and proceed with enabling
|
|
regions when there might be conflicting contents in the CPU cache.
|
|
|
|
If unsure, or if this kernel is meant for production environments,
|
|
say N.
|
|
|
|
config CXL_PMU
|
|
tristate "CXL Performance Monitoring Unit"
|
|
default CXL_BUS
|
|
depends on PERF_EVENTS
|
|
help
|
|
Support performance monitoring as defined in CXL rev 3.0
|
|
section 13.2: Performance Monitoring. CXL components may have
|
|
one or more CXL Performance Monitoring Units (CPMUs).
|
|
|
|
Say 'y/m' to enable a driver that will attach to performance
|
|
monitoring units and provide standard perf based interfaces.
|
|
|
|
If unsure say 'm'.
|
|
endif
|