9d9cd8e6a4
Make similar OF and ID table to extend support for ID match using i2c_match_data(). Currently it works only for OF match tables as the driver_data is wrong for ID match. While at it, drop blank lines before MODULE_DEVICE_TABLE* and remove trailing comma in the terminator entry for OF/ID table. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230903154257.70800-1-biju.das.jz@bp.renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
331 lines
8.2 KiB
C
331 lines
8.2 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
//
|
|
// max20086-regulator.c - MAX20086-MAX20089 camera power protector driver
|
|
//
|
|
// Copyright (C) 2022 Laurent Pinchart <laurent.pinchart@idesonboard.com>
|
|
// Copyright (C) 2018 Avnet, Inc.
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/module.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/regulator/of_regulator.h>
|
|
#include <linux/slab.h>
|
|
|
|
/* Register Offset */
|
|
#define MAX20086_REG_MASK 0x00
|
|
#define MAX20086_REG_CONFIG 0x01
|
|
#define MAX20086_REG_ID 0x02
|
|
#define MAX20086_REG_STAT1 0x03
|
|
#define MAX20086_REG_STAT2_L 0x04
|
|
#define MAX20086_REG_STAT2_H 0x05
|
|
#define MAX20086_REG_ADC1 0x06
|
|
#define MAX20086_REG_ADC2 0x07
|
|
#define MAX20086_REG_ADC3 0x08
|
|
#define MAX20086_REG_ADC4 0x09
|
|
|
|
/* DEVICE IDs */
|
|
#define MAX20086_DEVICE_ID_MAX20086 0x40
|
|
#define MAX20086_DEVICE_ID_MAX20087 0x20
|
|
#define MAX20086_DEVICE_ID_MAX20088 0x10
|
|
#define MAX20086_DEVICE_ID_MAX20089 0x00
|
|
#define DEVICE_ID_MASK 0xf0
|
|
|
|
/* Register bits */
|
|
#define MAX20086_EN_MASK 0x0f
|
|
#define MAX20086_EN_OUT1 0x01
|
|
#define MAX20086_EN_OUT2 0x02
|
|
#define MAX20086_EN_OUT3 0x04
|
|
#define MAX20086_EN_OUT4 0x08
|
|
#define MAX20086_INT_DISABLE_ALL 0x3f
|
|
|
|
#define MAX20086_MAX_REGULATORS 4
|
|
|
|
struct max20086_chip_info {
|
|
u8 id;
|
|
unsigned int num_outputs;
|
|
};
|
|
|
|
struct max20086_regulator {
|
|
struct device_node *of_node;
|
|
struct regulator_init_data *init_data;
|
|
const struct regulator_desc *desc;
|
|
struct regulator_dev *rdev;
|
|
};
|
|
|
|
struct max20086 {
|
|
struct device *dev;
|
|
struct regmap *regmap;
|
|
struct gpio_desc *ena_gpiod;
|
|
|
|
const struct max20086_chip_info *info;
|
|
|
|
struct max20086_regulator regulators[MAX20086_MAX_REGULATORS];
|
|
};
|
|
|
|
static const struct regulator_ops max20086_buck_ops = {
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
};
|
|
|
|
#define MAX20086_REGULATOR_DESC(n) \
|
|
{ \
|
|
.name = "OUT"#n, \
|
|
.supply_name = "in", \
|
|
.id = (n) - 1, \
|
|
.ops = &max20086_buck_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.enable_reg = MAX20086_REG_CONFIG, \
|
|
.enable_mask = 1 << ((n) - 1), \
|
|
.enable_val = 1 << ((n) - 1), \
|
|
.disable_val = 0, \
|
|
}
|
|
|
|
static const char * const max20086_output_names[] = {
|
|
"OUT1",
|
|
"OUT2",
|
|
"OUT3",
|
|
"OUT4",
|
|
};
|
|
|
|
static const struct regulator_desc max20086_regulators[] = {
|
|
MAX20086_REGULATOR_DESC(1),
|
|
MAX20086_REGULATOR_DESC(2),
|
|
MAX20086_REGULATOR_DESC(3),
|
|
MAX20086_REGULATOR_DESC(4),
|
|
};
|
|
|
|
static int max20086_regulators_register(struct max20086 *chip)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < chip->info->num_outputs; i++) {
|
|
struct max20086_regulator *reg = &chip->regulators[i];
|
|
struct regulator_config config = { };
|
|
struct regulator_dev *rdev;
|
|
|
|
config.dev = chip->dev;
|
|
config.init_data = reg->init_data;
|
|
config.driver_data = chip;
|
|
config.of_node = reg->of_node;
|
|
config.regmap = chip->regmap;
|
|
config.ena_gpiod = chip->ena_gpiod;
|
|
|
|
rdev = devm_regulator_register(chip->dev, reg->desc, &config);
|
|
if (IS_ERR(rdev)) {
|
|
dev_err(chip->dev,
|
|
"Failed to register regulator output %s\n",
|
|
reg->desc->name);
|
|
return PTR_ERR(rdev);
|
|
}
|
|
|
|
reg->rdev = rdev;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int max20086_parse_regulators_dt(struct max20086 *chip, bool *boot_on)
|
|
{
|
|
struct of_regulator_match matches[MAX20086_MAX_REGULATORS] = { };
|
|
struct device_node *node;
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
node = of_get_child_by_name(chip->dev->of_node, "regulators");
|
|
if (!node) {
|
|
dev_err(chip->dev, "regulators node not found\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
for (i = 0; i < chip->info->num_outputs; ++i)
|
|
matches[i].name = max20086_output_names[i];
|
|
|
|
ret = of_regulator_match(chip->dev, node, matches,
|
|
chip->info->num_outputs);
|
|
of_node_put(node);
|
|
if (ret < 0) {
|
|
dev_err(chip->dev, "Failed to match regulators\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
*boot_on = false;
|
|
|
|
for (i = 0; i < chip->info->num_outputs; i++) {
|
|
struct max20086_regulator *reg = &chip->regulators[i];
|
|
|
|
reg->init_data = matches[i].init_data;
|
|
reg->of_node = matches[i].of_node;
|
|
reg->desc = &max20086_regulators[i];
|
|
|
|
if (reg->init_data) {
|
|
if (reg->init_data->constraints.always_on ||
|
|
reg->init_data->constraints.boot_on)
|
|
*boot_on = true;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int max20086_detect(struct max20086 *chip)
|
|
{
|
|
unsigned int data;
|
|
int ret;
|
|
|
|
ret = regmap_read(chip->regmap, MAX20086_REG_ID, &data);
|
|
if (ret < 0) {
|
|
dev_err(chip->dev, "Failed to read DEVICE_ID reg: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if ((data & DEVICE_ID_MASK) != chip->info->id) {
|
|
dev_err(chip->dev, "Invalid device ID 0x%02x\n", data);
|
|
return -ENXIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool max20086_gen_is_writeable_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case MAX20086_REG_MASK:
|
|
case MAX20086_REG_CONFIG:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static const struct regmap_config max20086_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.writeable_reg = max20086_gen_is_writeable_reg,
|
|
.max_register = 0x9,
|
|
.cache_type = REGCACHE_NONE,
|
|
};
|
|
|
|
static int max20086_i2c_probe(struct i2c_client *i2c)
|
|
{
|
|
struct max20086 *chip;
|
|
enum gpiod_flags flags;
|
|
bool boot_on;
|
|
int ret;
|
|
|
|
chip = devm_kzalloc(&i2c->dev, sizeof(*chip), GFP_KERNEL);
|
|
if (!chip)
|
|
return -ENOMEM;
|
|
|
|
chip->dev = &i2c->dev;
|
|
chip->info = i2c_get_match_data(i2c);
|
|
|
|
i2c_set_clientdata(i2c, chip);
|
|
|
|
chip->regmap = devm_regmap_init_i2c(i2c, &max20086_regmap_config);
|
|
if (IS_ERR(chip->regmap)) {
|
|
ret = PTR_ERR(chip->regmap);
|
|
dev_err(chip->dev, "Failed to allocate register map: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = max20086_parse_regulators_dt(chip, &boot_on);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = max20086_detect(chip);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Until IRQ support is added, just disable all interrupts. */
|
|
ret = regmap_update_bits(chip->regmap, MAX20086_REG_MASK,
|
|
MAX20086_INT_DISABLE_ALL,
|
|
MAX20086_INT_DISABLE_ALL);
|
|
if (ret < 0) {
|
|
dev_err(chip->dev, "Failed to disable interrupts: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Get the enable GPIO. If any of the outputs is marked as being
|
|
* enabled at boot, request the GPIO with an initial high state to
|
|
* avoid disabling outputs that may have been turned on by the boot
|
|
* loader. Otherwise, request it with a low state to enter lower-power
|
|
* shutdown.
|
|
*/
|
|
flags = boot_on ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
|
|
chip->ena_gpiod = devm_gpiod_get(chip->dev, "enable", flags);
|
|
if (IS_ERR(chip->ena_gpiod)) {
|
|
ret = PTR_ERR(chip->ena_gpiod);
|
|
dev_err(chip->dev, "Failed to get enable GPIO: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = max20086_regulators_register(chip);
|
|
if (ret < 0) {
|
|
dev_err(chip->dev, "Failed to register regulators: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct max20086_chip_info max20086_chip_info = {
|
|
.id = MAX20086_DEVICE_ID_MAX20086,
|
|
.num_outputs = 4,
|
|
};
|
|
|
|
static const struct max20086_chip_info max20087_chip_info = {
|
|
.id = MAX20086_DEVICE_ID_MAX20087,
|
|
.num_outputs = 4,
|
|
};
|
|
|
|
static const struct max20086_chip_info max20088_chip_info = {
|
|
.id = MAX20086_DEVICE_ID_MAX20088,
|
|
.num_outputs = 2,
|
|
};
|
|
|
|
static const struct max20086_chip_info max20089_chip_info = {
|
|
.id = MAX20086_DEVICE_ID_MAX20089,
|
|
.num_outputs = 2,
|
|
};
|
|
|
|
static const struct i2c_device_id max20086_i2c_id[] = {
|
|
{ "max20086", (kernel_ulong_t)&max20086_chip_info },
|
|
{ "max20087", (kernel_ulong_t)&max20087_chip_info },
|
|
{ "max20088", (kernel_ulong_t)&max20088_chip_info },
|
|
{ "max20089", (kernel_ulong_t)&max20089_chip_info },
|
|
{ /* Sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, max20086_i2c_id);
|
|
|
|
static const struct of_device_id max20086_dt_ids[] __maybe_unused = {
|
|
{ .compatible = "maxim,max20086", .data = &max20086_chip_info },
|
|
{ .compatible = "maxim,max20087", .data = &max20087_chip_info },
|
|
{ .compatible = "maxim,max20088", .data = &max20088_chip_info },
|
|
{ .compatible = "maxim,max20089", .data = &max20089_chip_info },
|
|
{ /* Sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, max20086_dt_ids);
|
|
|
|
static struct i2c_driver max20086_regulator_driver = {
|
|
.driver = {
|
|
.name = "max20086",
|
|
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
|
|
.of_match_table = of_match_ptr(max20086_dt_ids),
|
|
},
|
|
.probe = max20086_i2c_probe,
|
|
.id_table = max20086_i2c_id,
|
|
};
|
|
|
|
module_i2c_driver(max20086_regulator_driver);
|
|
|
|
MODULE_AUTHOR("Watson Chow <watson.chow@avnet.com>");
|
|
MODULE_DESCRIPTION("MAX20086-MAX20089 Camera Power Protector Driver");
|
|
MODULE_LICENSE("GPL");
|