Haavard Skinnemoen 9c81c5c95c atmel_serial: filter out FP during baud rate detection
I made a change to u-boot that used the FP (Fractional Part) field of BRGR
to achieve more accurate baud rate generation.  Unfortunately, the
atmel_serial driver looks at the whole BRGR register when trying to detect
the baud rate that the port is currently running at, so setting FP to a
nonzero value breaks the baud rate detection.

I'll sit on the u-boot patch for a while longer, but this is clearly a
bug in the atmel_serial driver which should be fixed.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-06 11:29:12 -07:00
..
2008-02-08 09:22:25 -08:00
2008-02-08 09:22:25 -08:00
2008-02-08 09:22:25 -08:00
2008-02-04 13:14:06 +00:00
2008-04-30 08:29:45 -07:00
2008-04-17 20:05:39 +02:00
2006-12-08 08:28:57 -08:00
2007-11-14 18:45:46 -08:00
2008-02-03 14:47:38 +02:00
2008-04-19 17:17:34 +01:00
2007-11-29 09:24:53 -08:00
2008-04-30 08:29:47 -07:00
2008-02-03 17:29:25 +02:00
2006-12-08 08:28:57 -08:00
2008-05-16 15:09:08 +09:00
2008-05-02 05:22:51 -07:00
2008-06-06 11:29:09 -07:00
2006-12-08 08:28:57 -08:00
2007-07-18 08:38:22 -07:00
2007-07-18 08:38:22 -07:00