linux/tools
Greg Kroah-Hartman d4551c189d IIO: 1st set of new device support, features and cleanup for 6.9
IIO Backend support
 ===================
 
 New approach from Nuno Sa to the problem of reuse of drivers with
 IIO devices that are actually the combination of a highspeed chip
 and an FPGA core handling the data capture and flows. It will hopefully
 also apply to some other split designs. The ad9467 and axi-adi drivers
 are converted over to this framework.
 
 New device support
 ==================
 
 adi,admfm2000
 - New driver for this dual microwave down converter.
 ams,as73211
 - Add support for as7331 UV sensor.
 richtek,rtq6056
 - Add support for related parts RTQ6053 and RTQ6059
 st,lsm6dsx
 - Add ASM330LHHXG1 accelerometer and gyro support (mainly IDs)
 ti,ads1298
 - New driver for this medical ADC.
 
 Features
 ========
 
 tests
 - Unit tests for the gain-time-scale helper library.
 bosch,bmi088
 - I2C support.
 bosh,bmi160
 - Add 10EC5280 ACPI ID. Used in a number of devices that won't get fixed.
   The ID is actually a PCI ID belonging to realtech. No response was received
   to earlier attempts to notify them of this.
   The manufacturers of some devices have replied to say they will not fix
   this incorrect ID. Add the ID and hope it isn't a problem.
 bosch,bmi323
 - Add BOSC0200 ACPI ID. Note this is a duplicate of one in the bmc150
   driver (it appears these parts share a windows driver).
   Both drivers perform an ID check that is safe on the other part before
   successfully probing.
 hid-sensors-als
 - Add color temperature and chromaticity support. Note this is a replacement
   for the series reverted in 6.8 that correctly handles all the potential
   channel combinations.
 honeywell,hsc030pa
 - Triggered buffer support (after driver cleanup).
 honeywell,mprls00025pa
 - Improved error handling.
 - New DT binding to allow use of part number triplet as provided in data sheet
   to specify equivalent of most of the binding more efficiently.
 - SPI support.
 memsic,mxc4005
 - ACPI ID MDA6655 as seen in the Chuwi Minibook X 2023
 ti,hdc3020
 - Add threshold event support (after some driver cleanup)
 veml,vcnl4000
 - Switch to high resolution proximity measurement.
 
 Cleanup
 =======
 Various minor typo fixes and better use of defines etc.
 
 Treewide
 - Stop using ACPI_PTR(). The savings in space are small and not worth
   the complexity of __maybe_unused of ifdef guards.  To avoid use in
   new IIO drivers based on copy and paste, clean it out.
 - cleanup.h based handling of iio_device_claim_direct_mode()/
   iio_device_release_direct_mode() using scope_cond_guard().
   In many drivers this is combined with other automated cleanup
   to give maximum simplifications.
   An initial set of drivers are converted over to this infrastructure.
 
 Tools
 - Use rewinddir() instead of seekdir() to return to start of file.
 
 core
 - Make iio_bus_type constant.
 
 adi,ad16475
 - Use irq_get_trigger_type() instead of opencoding.
 adi,ad16480
 - Use irq_get_trigger_type() instead of opencoding.
 adi,ad-sigma-delta
 - Avoid overwriting IRQ flags if provided by firmware.
 ams,as73211
 - Use IIO_VAL_FRACTIONAL for scales to simplify the code and potentially
   improve accuracy.
 gts-library
 - Use a div64_u64() instead of a loop to do a division.
 honeywell,mprls00025pa
 - Clean up dt-binding doc.
 - Drop defaults when DT binding not providing values. Very unlikely
   these were useful given they were wrong for vast majority of supported
   devices.
 - Whitespace cleanup
 miramems,da280
 - Use i2c_get_match_data() to replace hand rolled ACPI matching code.
 semtech,sx9324
 - Avoid unnecessary copying of property strings.
 st,lsm6dsx
 - Improve docs, particularly wrt to making addition of new device
   support less noisy.
 st,lsm9ds0
 - Use dev_err_probe() in all probe() error handling.
 - Improved header includes.
 - Tidy up termination of ID tables.
 ti,ads1014
 - Correct upper bound on PGA (wrong value had no actual impact)
 ti,afe4403/4404
 - devm_ useage to simplify error handling in probe() and allow() remove to
   be dropped.
 voltage-divider
 - Add dt-binding for io-channel-cells to allow such a device to be both
   an IIO consumer and IIO producer at the same time.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmXXmXERHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0Foj8Bg/+OZgU0FOEhUXidF58ulMBPTmWG4qBsCCK
 nB8MhimNn9XcoUDkZwns5ABgRKJvYVqK3VXaGj7HXRcpHzjOAHDCD1aS9EDdwHuo
 prH9Q5L7iVMhOjKcK3UwtzbUOAjrrmE4Oa74RH4oDLKV9ws6mb1VQfoOgpRNTsTK
 rA0A3B4W78U+UxLZPWIuYDUS/BgDfSfB024VFtUhMvo0B6G52u6hoDk04//hQuW8
 IE0db4VxJLuRDYinBiTbtFtXWO8FNWd8r37MlQKx/llEKtjzI1ZttOK8DyQRudJ7
 rLP3nO8svCcQ9oJn0YrnFL9y6PlW/ASUaXH47xBfAiCdKgHlQTf3kDyzwddCqQRD
 3cqghbUbYp65Nm1o2TXYQio4zEInS/1ZMzpezb9K1+oiz/xGarjMCR+J4Za4cw76
 5jCfnp8vBPDX7JdGwYgbK9nXkXAJ5ewdm7ad03t3oPwfAQPlXfAHIWDT8evNDVlc
 L94RSmKeMKL1BG3jOr7mJbqIwivf799pgudVJMuBfnlYR+gkBBVvFWhXrgvsJWhQ
 gKhqfEYCjtJ/t483zcJporvWBmmmf6gUvNOB4x6oA0j85GPGoDlTdfK54dkD+98k
 KP83Wd4LqDOM6V6PE+L7yTW05sOgT2qDHYrw/qAPoEogThSSCoqRm/kWwPBv3toL
 0ykQId5/UBk=
 =xkgf
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-6.9a' of http://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

IIO: 1st set of new device support, features and cleanup for 6.9

IIO Backend support
===================

New approach from Nuno Sa to the problem of reuse of drivers with
IIO devices that are actually the combination of a highspeed chip
and an FPGA core handling the data capture and flows. It will hopefully
also apply to some other split designs. The ad9467 and axi-adi drivers
are converted over to this framework.

New device support
==================

adi,admfm2000
- New driver for this dual microwave down converter.
ams,as73211
- Add support for as7331 UV sensor.
richtek,rtq6056
- Add support for related parts RTQ6053 and RTQ6059
st,lsm6dsx
- Add ASM330LHHXG1 accelerometer and gyro support (mainly IDs)
ti,ads1298
- New driver for this medical ADC.

Features
========

tests
- Unit tests for the gain-time-scale helper library.
bosch,bmi088
- I2C support.
bosh,bmi160
- Add 10EC5280 ACPI ID. Used in a number of devices that won't get fixed.
  The ID is actually a PCI ID belonging to realtech. No response was received
  to earlier attempts to notify them of this.
  The manufacturers of some devices have replied to say they will not fix
  this incorrect ID. Add the ID and hope it isn't a problem.
bosch,bmi323
- Add BOSC0200 ACPI ID. Note this is a duplicate of one in the bmc150
  driver (it appears these parts share a windows driver).
  Both drivers perform an ID check that is safe on the other part before
  successfully probing.
hid-sensors-als
- Add color temperature and chromaticity support. Note this is a replacement
  for the series reverted in 6.8 that correctly handles all the potential
  channel combinations.
honeywell,hsc030pa
- Triggered buffer support (after driver cleanup).
honeywell,mprls00025pa
- Improved error handling.
- New DT binding to allow use of part number triplet as provided in data sheet
  to specify equivalent of most of the binding more efficiently.
- SPI support.
memsic,mxc4005
- ACPI ID MDA6655 as seen in the Chuwi Minibook X 2023
ti,hdc3020
- Add threshold event support (after some driver cleanup)
veml,vcnl4000
- Switch to high resolution proximity measurement.

Cleanup
=======
Various minor typo fixes and better use of defines etc.

Treewide
- Stop using ACPI_PTR(). The savings in space are small and not worth
  the complexity of __maybe_unused of ifdef guards.  To avoid use in
  new IIO drivers based on copy and paste, clean it out.
- cleanup.h based handling of iio_device_claim_direct_mode()/
  iio_device_release_direct_mode() using scope_cond_guard().
  In many drivers this is combined with other automated cleanup
  to give maximum simplifications.
  An initial set of drivers are converted over to this infrastructure.

Tools
- Use rewinddir() instead of seekdir() to return to start of file.

core
- Make iio_bus_type constant.

adi,ad16475
- Use irq_get_trigger_type() instead of opencoding.
adi,ad16480
- Use irq_get_trigger_type() instead of opencoding.
adi,ad-sigma-delta
- Avoid overwriting IRQ flags if provided by firmware.
ams,as73211
- Use IIO_VAL_FRACTIONAL for scales to simplify the code and potentially
  improve accuracy.
gts-library
- Use a div64_u64() instead of a loop to do a division.
honeywell,mprls00025pa
- Clean up dt-binding doc.
- Drop defaults when DT binding not providing values. Very unlikely
  these were useful given they were wrong for vast majority of supported
  devices.
- Whitespace cleanup
miramems,da280
- Use i2c_get_match_data() to replace hand rolled ACPI matching code.
semtech,sx9324
- Avoid unnecessary copying of property strings.
st,lsm6dsx
- Improve docs, particularly wrt to making addition of new device
  support less noisy.
st,lsm9ds0
- Use dev_err_probe() in all probe() error handling.
- Improved header includes.
- Tidy up termination of ID tables.
ti,ads1014
- Correct upper bound on PGA (wrong value had no actual impact)
ti,afe4403/4404
- devm_ useage to simplify error handling in probe() and allow() remove to
  be dropped.
voltage-divider
- Add dt-binding for io-channel-cells to allow such a device to be both
  an IIO consumer and IIO producer at the same time.

* tag 'iio-for-6.9a' of http://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (106 commits)
  iio: imu: bmi323: Add ACPI Match Table
  iio: accel: bmc150: Document duplicate ACPI entries with bmi323 driver
  iio: adc: ti-ads1298: Add driver
  dt-bindings: iio: adc: ti-ads1298: Add bindings
  iio: pressure: hsc030pa add triggered buffer
  iio: pressure: hsc030pa add mandatory delay
  iio: pressure: hsc030pa: update datasheet URLs
  iio: pressure: hsc030pa: include cleanup
  iio: pressure: hsc030pa: use signed type to hold div_64() result
  dt-bindings: iio: pressure: honeywell,hsc030pa.yaml add spi props
  iio: st_sensors: lsm9ds0: Use common style for terminator in ID tables
  iio: st_sensors: lsm9ds0: Don't use "proxy" headers
  iio: st_sensors: lsm9ds0: Use dev_err_probe() everywhere
  iio: adc: adi-axi-adc: move to backend framework
  iio: adc: ad9467: convert to backend framework
  iio: add the IIO backend framework
  iio: buffer-dmaengine: export buffer alloc and free functions
  of: property: add device link support for io-backends
  dt-bindings: adc: axi-adc: update bindings for backend framework
  dt-bindings: adc: ad9467: add new io-backend property
  ...
2024-02-25 14:11:41 +01:00
..
accounting
arch work around gcc bugs with 'asm goto' with outputs 2024-02-09 15:57:48 -08:00
bootconfig
bpf bpfilter: remove bpfilter 2024-01-04 10:23:10 -08:00
build
certs
cgroup samples: introduce new samples subdir for cgroup 2023-12-10 16:51:54 -08:00
counter tools/counter: Remove unneeded semicolon 2023-12-20 11:43:31 -05:00
crypto crypto: tcrypt - add script tcrypt_speed_compare.py 2023-12-29 11:25:55 +08:00
debugging
edid
firewire
firmware
gpio
hv
iio tools: iio: replace seekdir() in iio_generic_buffer 2024-01-23 22:06:56 +00:00
include work around gcc bugs with 'asm goto' with outputs 2024-02-09 15:57:48 -08:00
kvm/kvm_stat
laptop
leds
lib perf tools improvements and fixes for v6.8: 2024-01-19 14:25:23 -08:00
memory-model
mm
net/ynl tools/net/ynl-gen-rst: Remove extra indentation from generated docs 2023-12-18 14:39:44 -08:00
objtool Address a GCC-14 warning: there's no real bug, but indeed the calloc order doesn't match 2024-01-08 18:31:27 -08:00
pci
pcmcia
perf perf evlist: Fix evlist__new_default() for > 1 core PMU 2024-01-30 11:40:28 -03:00
power tools cpupower bench: Override CFLAGS assignments 2024-01-21 16:57:51 -07:00
rcu
scripts
spi
testing powerpc fixes for 6.8 #3 2024-02-17 16:59:31 -08:00
thermal tools/thermal/tmon: Fix compilation warning for wrong format 2024-01-02 09:33:19 +01:00
time
tracing tools/rtla: Exit with EXIT_SUCCESS when help is invoked 2024-02-12 10:59:09 +01:00
usb
verification tools/rv: Fix curr_reactor uninitialized variable 2024-02-12 09:58:36 +01:00
virtio
wmi
workqueue
Makefile