iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
d6a4f70909
linux/arch/powerpc/kernel
History
Paul Mackerras d6a4f70909 powerpc/powernv: Don't call generic code on offline cpus 
On PowerNV platforms, when a CPU is offline, we put it into nap mode.
It's possible that the CPU wakes up from nap mode while it is still
offline due to a stray IPI.  A misdirected device interrupt could also
potentially cause it to wake up.  In that circumstance, we need to clear
the interrupt so that the CPU can go back to nap mode.

In the past the clearing of the interrupt was accomplished by briefly
enabling interrupts and allowing the normal interrupt handling code
(do_IRQ() etc.) to handle the interrupt.  This has the problem that
this code calls irq_enter() and irq_exit(), which call functions such
as account_system_vtime() which use RCU internally.  Use of RCU is not
permitted on offline CPUs and will trigger errors if RCU checking is
enabled.

To avoid calling into any generic code which might use RCU, we adopt
a different method of clearing interrupts on offline CPUs.  Since we
are on the PowerNV platform, we know that the system interrupt
controller is a XICS being driven directly (i.e. not via hcalls) by
the kernel.  Hence this adds a new icp_native_flush_interrupt()
function to the native-mode XICS driver and arranges to call that
when an offline CPU is woken from nap.  This new function reads the
interrupt from the XICS.  If it is an IPI, it clears the IPI; if it
is a device interrupt, it prints a warning and disables the source.
Then it does the end-of-interrupt processing for the interrupt.

The other thing that briefly enabling interrupts did was to check and
clear the irq_happened flag in this CPU's PACA.  Therefore, after
flushing the interrupt from the XICS, we also clear all bits except
the PACA_IRQ_HARD_DIS (interrupts are hard disabled) bit from the
irq_happened flag.  The PACA_IRQ_HARD_DIS flag is set by power7_nap()
and is left set to indicate that interrupts are hard disabled.  This
means we then have to ignore that flag in power7_nap(), which is
reasonable since it doesn't indicate that any interrupt event needs
servicing.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-09-25 23:14:50 +10:00
..
vdso32 powerpc/booke64: Use SPRG7 for VDSO 2014-03-19 19:57:14 -05:00
vdso64 powerpc/booke64: Use SPRG7 for VDSO 2014-03-19 19:57:14 -05:00
.gitignore
align.c KVM: PPC: BOOK3S: Remove open coded make_dsisr in alignment handler 2014-05-30 14:26:25 +02:00
asm-offsets.c Here are the PPC and ARM changes for KVM, which I separated because 2014-08-07 11:35:30 -07:00
audit.c
btext.c powerpc/btext: Fix CONFIG_PPC_EARLY_DEBUG_BOOTX on ppc32 2013-08-27 16:01:23 +10:00
cacheinfo.c powerpc/pseries: Update dynamic cache nodes for suspend/resume operation 2014-03-07 15:54:49 +11:00
cacheinfo.h
compat_audit.c
cpu_setup_6xx.S
cpu_setup_44x.S
cpu_setup_fsl_booke.S powerpc: No need to use dot symbols when branching to a function 2014-04-23 10:05:16 +10:00
cpu_setup_pa6t.S
cpu_setup_power.S powerpc/powernv: Enable POWER8 doorbell IPIs 2014-06-11 17:05:12 +10:00
cpu_setup_ppc970.S
cputable.c powerpc: Remove CLASSIC_PPC 2014-07-28 14:11:22 +10:00
crash_dump.c powerpc/crashdump : Fix page frame number check in copy_oldmem_page 2014-02-28 18:06:25 +11:00
crash.c arch,powerpc: Convert smp_mb__*() 2014-04-18 14:20:41 +02:00
dbell.c powerpc: Add accounting for Doorbell interrupts 2013-04-18 15:59:55 +10:00
dma-iommu.c powerpc/iommu: Update the generic code to use dynamic iommu page sizes 2013-12-30 14:17:19 +11:00
dma-swiotlb.c
dma.c powerpc/powernv: Add iommu DMA bypass support for IODA2 2014-02-11 16:07:37 +11:00
eeh_cache.c powerpc/eeh: Replace pr_warning() with pr_warn() 2014-08-05 15:41:34 +10:00
eeh_dev.c powerpc/eeh: Replace pr_warning() with pr_warn() 2014-08-05 15:41:34 +10:00
eeh_driver.c powerpc/eeh: Replace pr_warning() with pr_warn() 2014-08-05 15:41:34 +10:00
eeh_event.c powerpc/powernv: Fix killed EEH event 2014-06-11 17:04:33 +10:00
eeh_pe.c powerpc/eeh: Aux PE data for error log 2014-08-05 15:41:43 +10:00
eeh_sysfs.c powerpc/eeh: Skip eeh sysfs when eeh is disabled 2014-06-05 13:20:38 +10:00
eeh.c powerpc/eeh: Export eeh_iommu_group_to_pe() 2014-08-07 13:00:02 +10:00
entry_32.S powerpc/32bit:Store temporary result in r0 instead of r8 2013-06-01 08:29:27 +10:00
entry_64.S powerpc/book3s: Add basic infrastructure to handle HMI in Linux. 2014-08-05 16:33:48 +10:00
epapr_hcalls.S powerpc: Add paravirt idle loop for 64-bit Book-E 2013-03-13 14:19:36 -05:00
epapr_paravirt.c Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc 2014-06-10 18:54:22 -07:00
exceptions-64e.S powerpc: Remove platforms/wsp and associated pieces 2014-06-11 16:35:38 +10:00
exceptions-64s.S powerpc: Fix "attempt to move .org backwards" error 2014-08-13 15:13:25 +10:00
fadump.c Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc 2014-06-10 18:54:22 -07:00
firmware.c
fpu.S powerpc: Don't corrupt transactional state when using FP/VMX in kernel 2014-01-15 13:59:11 +11:00
fsl_booke_entry_mapping.S powerpc: enable the relocatable support for the fsl booke 32bit kernel 2014-01-09 17:52:16 -06:00
ftrace.c powerpc/ftrace: Add call to ftrace_graph_is_dead() in function graph code 2014-07-18 13:56:56 -04:00
head_8xx.S powerpc/8xx: Fixing issue with CONFIG_PIN_TLB 2013-10-28 21:11:21 -05:00
head_32.S
head_40x.S powerpc: Remove check for CONFIG_SERIAL_TEXT_DEBUG 2014-06-11 16:31:21 +10:00
head_44x.S powerpc/ppc476: Disable BTAC 2014-08-13 15:13:42 +10:00
head_64.S Merge remote-tracking branch 'scott/next' into next 2014-08-05 14:13:41 +10:00
head_booke.h powerpc: Fix interrupt range check on debug exception 2013-05-02 10:31:01 +10:00
head_fsl_booke.S powerpc/fsl_booke: smp support for booting a relocatable kernel above 64M 2014-01-09 17:52:18 -06:00
hw_breakpoint.c powerpc: Make a bunch of things static 2014-09-25 23:14:41 +10:00
ibmebus.c powerpc: make of_device_ids const 2014-09-25 23:14:46 +10:00
idle_6xx.S
idle_book3e.S powerpc: No need to use dot symbols when branching to a function 2014-04-23 10:05:16 +10:00
idle_e500.S
idle_power4.S powerpc: No need to use dot symbols when branching to a function 2014-04-23 10:05:16 +10:00
idle_power7.S powerpc/powernv: Don't call generic code on offline cpus 2014-09-25 23:14:50 +10:00
idle.c powerpc/idle: Convert use of typedef ctl_table to struct ctl_table 2013-07-01 11:10:35 +10:00
io-workarounds.c powerpc: Better split CONFIG_PPC_INDIRECT_PIO and CONFIG_PPC_INDIRECT_MMIO 2013-08-14 14:57:50 +10:00
io.c powerpc/powernv: Add PIO accessors for Power8 LPC bus 2013-08-14 14:58:08 +10:00
iomap.c powerpc/kerenl: Enable EEH for IO accessors 2014-06-24 12:43:13 +10:00
iommu.c powerpc/powernv: Fix IOMMU group lost 2014-08-13 15:13:42 +10:00
irq.c powerpc/book3s: Add basic infrastructure to handle HMI in Linux. 2014-08-05 16:33:48 +10:00
isa-bridge.c
jump_label.c
kgdb.c powerpc: Delete non-required instances of include <linux/init.h> 2014-01-15 13:46:44 +11:00
kprobes.c powerpc/kprobes: Fix jprobes on ABI v2 (LE) 2014-06-24 14:05:55 +10:00
kvm_emul.S
kvm.c At over 200 commits, covering almost all supported architectures, this 2014-06-04 08:47:12 -07:00
l2cr_6xx.S
legacy_serial.c powerpc: make of_device_ids const 2014-09-25 23:14:46 +10:00
machine_kexec_32.c
machine_kexec_64.c powerpc, kexec: Fix "Processor X is stuck" issue during kexec from ST mode 2014-05-28 13:24:26 +10:00
machine_kexec.c powerpc: Fix endian issues in kexec and crash dump code 2014-02-11 11:24:52 +11:00
Makefile powerpc: Separate ppc32 symbol exports into ppc_ksyms_32.c 2014-09-25 23:14:40 +10:00
mce_power.c powerpc/book3s: Recover from MC in sapphire on SCOM read via MMIO. 2014-03-07 15:52:10 +11:00
mce.c powerpc/book3s: Recover from MC in sapphire on SCOM read via MMIO. 2014-03-07 15:52:10 +11:00
misc_32.S powerpc: Set the correct ksp_limit on ppc32 when switching to irq stack 2014-02-17 11:19:34 +11:00
misc_64.S powerpc: module: handle MODVERSION for .TOC. 2014-04-23 10:05:28 +10:00
misc.S
module_32.c powerpc: Move local setup.h declarations to arch includes 2013-10-30 16:00:31 +11:00
module_64.c powerpc/module: Fix TOC symbol CRC 2014-06-25 13:10:48 +10:00
module.c powerpc: Move local setup.h declarations to arch includes 2013-10-30 16:00:31 +11:00
msi.c
nvram_64.c powerpc: Make a bunch of things static 2014-09-25 23:14:41 +10:00
of_platform.c powerpc: make of_device_ids const 2014-09-25 23:14:46 +10:00
paca.c KVM: PPC: Book3S PR: Rework SLB switching code 2014-05-30 14:26:30 +02:00
pci_32.c powerpc/pci: Support per-aperture memory offset 2013-05-06 13:40:40 +10:00
pci_64.c powerpc/PCI: Fix NULL dereference in sys_pciconfig_iobase() list traversal 2014-04-14 16:33:49 -06:00
pci_dn.c powerpc: Make PCI device node device tree accesses endian safe 2013-08-14 15:33:31 +10:00
pci_of_scan.c powerpc: Make a bunch of things static 2014-09-25 23:14:41 +10:00
pci-common.c powerpc: Make a bunch of things static 2014-09-25 23:14:41 +10:00
pci-hotplug.c powerpc/PCI: Use pci_is_bridge() to simplify code 2014-05-27 14:57:36 -06:00
pmc.c
ppc32.h powerpc: switch to generic old sigaction() 2013-02-03 18:16:10 -05:00
ppc_ksyms_32.c powerpc: Separate ppc32 symbol exports into ppc_ksyms_32.c 2014-09-25 23:14:40 +10:00
ppc_ksyms.c powerpc: Separate ppc32 symbol exports into ppc_ksyms_32.c 2014-09-25 23:14:40 +10:00
ppc_save_regs.S
proc_powerpc.c proc_powerpc: switch to fixed_size_llseek() 2013-06-29 12:57:50 +04:00
process.c powerpc: Move more symbol exports next to function definitions 2014-09-25 23:14:38 +10:00
prom_init_check.sh powerpc: Simplify symbol check in prom_init_check.sh 2014-09-25 23:14:46 +10:00
prom_init.c powerpc/powernv: Remove OPAL v1 takeover 2014-06-25 13:10:47 +10:00
prom_parse.c powerpc: of_parse_dma_window should take a __be32 *dma_window 2013-08-14 15:33:26 +10:00
prom.c powerpc: Make a bunch of things static 2014-09-25 23:14:41 +10:00
ptrace32.c powerpc: move debug registers in a structure 2013-10-18 18:44:49 -05:00
ptrace.c powerpc: Make a bunch of things static 2014-09-25 23:14:41 +10:00
reloc_32.S powerpc: Don't flush/invalidate the d/icache for an unknown relocation type 2013-07-01 11:10:34 +10:00
reloc_64.S powerpc: Align p_dyn, p_rela and p_st symbols 2014-03-07 13:50:19 +11:00
rtas_flash.c powerpc: Fix endianness of flash_block_list in rtas_flash 2014-07-28 11:30:54 +10:00
rtas_pci.c powerpc/eeh: Block PCI-CFG access during PE reset 2014-04-28 17:34:02 +10:00
rtas-proc.c
rtas-rtc.c
rtas.c of/fdt: update of_get_flat_dt_prop in prep for libfdt 2014-04-30 00:59:15 -05:00
rtasd.c powerpc: Make a bunch of things static 2014-09-25 23:14:41 +10:00
setup_32.c powerpc: Make boot_cpuid common between 32 and 64-bit 2014-04-07 10:33:14 +10:00
setup_64.c arch/powerpc: replace obsolete strict_strto* calls 2014-08-08 15:57:28 -07:00
setup-common.c powerpc: Move more symbol exports next to function definitions 2014-09-25 23:14:38 +10:00
signal_32.c powerpc: Use sigsp() 2014-08-06 13:04:32 +02:00
signal_64.c powerpc: Use sigsp() 2014-08-06 13:04:32 +02:00
signal.c powerpc: Use sigsp() 2014-08-06 13:04:32 +02:00
signal.h powerpc: Use get_signal() signal_setup_done() 2014-08-06 13:03:09 +02:00
smp-tbsync.c powerpc: Delete non-required instances of include <linux/init.h> 2014-01-15 13:46:44 +11:00
smp.c powerpc: Ensure global functions include their prototype 2014-09-25 23:14:42 +10:00
stacktrace.c
suspend.c
swsusp_32.S
swsusp_64.c
swsusp_asm64.S powerpc: Only save/restore SDR1 if in hypervisor mode 2013-10-31 12:37:29 +11:00
swsusp_booke.S powerpc/fsl-booke: Use SPRN_SPRGn rather than mfsprg/mtsprg 2014-01-07 19:06:03 -06:00
swsusp.c
sys_ppc32.c unify compat fanotify_mark(2), switch to COMPAT_SYSCALL_DEFINE 2013-05-09 13:46:38 -04:00
syscalls.c powerpc: Delete non-required instances of include <linux/init.h> 2014-01-15 13:46:44 +11:00
sysfs.c powerpc: Fix regression of per-CPU DSCR setting 2014-05-28 13:35:40 +10:00
systbl_chk.c
systbl_chk.sh
systbl.S powerpc: Use standard macros for sys_sigpending() & sys_old_getrlimit() 2014-07-28 14:09:23 +10:00
tau_6xx.c
time.c powerpc: Make a bunch of things static 2014-09-25 23:14:41 +10:00
tm.S powerpc: Fix regression of per-CPU DSCR setting 2014-05-28 13:35:40 +10:00
traps.c powerpc/book3s: Add basic infrastructure to handle HMI in Linux. 2014-08-05 16:33:48 +10:00
udbg_16550.c powerpc: Remove platforms/wsp and associated pieces 2014-06-11 16:35:38 +10:00
udbg.c powerpc: Remove platforms/wsp and associated pieces 2014-06-11 16:35:38 +10:00
uprobes.c uprobes/powerpc: Kill arch_uprobe->ainsn 2013-11-20 16:31:01 +01:00
vdso.c arm64,ia64,ppc,s390,sh,tile,um,x86,mm: remove default gate area 2014-08-08 15:57:27 -07:00
vecemu.c powerpc: Put FP/VSX and VR state into structures 2013-10-11 17:26:49 +11:00
vector.S powerpc: Don't corrupt transactional state when using FP/VMX in kernel 2014-01-15 13:59:11 +11:00
vio.c arch/powerpc: replace obsolete strict_strto* calls 2014-08-08 15:57:28 -07:00
vmlinux.lds.S powerpc/modules: Module CRC relocation fix causes perf issues 2013-07-24 14:18:43 +10:00