c0a7c00253
This patch adds a DT bindings documentation for Cadence CSI2TX v2.1 controller. Signed-off-by: Jan Kotas <jank@cadence.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
100 lines
2.5 KiB
Plaintext
100 lines
2.5 KiB
Plaintext
Cadence MIPI-CSI2 TX controller
|
|
===============================
|
|
|
|
The Cadence MIPI-CSI2 TX controller is a CSI-2 bridge supporting up to
|
|
4 CSI lanes in output, and up to 4 different pixel streams in input.
|
|
|
|
Required properties:
|
|
- compatible: must be set to "cdns,csi2tx" or "cdns,csi2tx-1.3"
|
|
for version 1.3 of the controller, "cdns,csi2tx-2.1" for v2.1
|
|
- reg: base address and size of the memory mapped region
|
|
- clocks: phandles to the clocks driving the controller
|
|
- clock-names: must contain:
|
|
* esc_clk: escape mode clock
|
|
* p_clk: register bank clock
|
|
* pixel_if[0-3]_clk: pixel stream output clock, one for each stream
|
|
implemented in hardware, between 0 and 3
|
|
|
|
Optional properties
|
|
- phys: phandle to the D-PHY. If it is set, phy-names need to be set
|
|
- phy-names: must contain "dphy"
|
|
|
|
Required subnodes:
|
|
- ports: A ports node with one port child node per device input and output
|
|
port, in accordance with the video interface bindings defined in
|
|
Documentation/devicetree/bindings/media/video-interfaces.txt. The
|
|
port nodes are numbered as follows.
|
|
|
|
Port Description
|
|
-----------------------------
|
|
0 CSI-2 output
|
|
1 Stream 0 input
|
|
2 Stream 1 input
|
|
3 Stream 2 input
|
|
4 Stream 3 input
|
|
|
|
The stream input port nodes are optional if they are not
|
|
connected to anything at the hardware level or implemented
|
|
in the design. Since there is only one endpoint per port,
|
|
the endpoints are not numbered.
|
|
|
|
Example:
|
|
|
|
csi2tx: csi-bridge@0d0e1000 {
|
|
compatible = "cdns,csi2tx";
|
|
reg = <0x0d0e1000 0x1000>;
|
|
clocks = <&byteclock>, <&byteclock>,
|
|
<&coreclock>, <&coreclock>,
|
|
<&coreclock>, <&coreclock>;
|
|
clock-names = "p_clk", "esc_clk",
|
|
"pixel_if0_clk", "pixel_if1_clk",
|
|
"pixel_if2_clk", "pixel_if3_clk";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
csi2tx_out: endpoint {
|
|
remote-endpoint = <&remote_in>;
|
|
clock-lanes = <0>;
|
|
data-lanes = <1 2>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
csi2tx_in_stream0: endpoint {
|
|
remote-endpoint = <&stream0_out>;
|
|
};
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
|
|
csi2tx_in_stream1: endpoint {
|
|
remote-endpoint = <&stream1_out>;
|
|
};
|
|
};
|
|
|
|
port@3 {
|
|
reg = <3>;
|
|
|
|
csi2tx_in_stream2: endpoint {
|
|
remote-endpoint = <&stream2_out>;
|
|
};
|
|
};
|
|
|
|
port@4 {
|
|
reg = <4>;
|
|
|
|
csi2tx_in_stream3: endpoint {
|
|
remote-endpoint = <&stream3_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|