linux/arch/x86/kernel/ftrace.c
Steven Rostedt (VMware) 0c0593b45c x86/ftrace: Make function graph use ftrace directly
We don't need special hook for graph tracer entry point,
but instead we can use graph_ops::func function to install
the return_hooker.

This moves the graph tracing setup _before_ the direct
trampoline prepares the stack, so the return_hooker will
be called when the direct trampoline is finished.

This simplifies the code, because we don't need to take into
account the direct trampoline setup when preparing the graph
tracer hooker and we can allow function graph tracer on entries
registered with direct trampoline.

Link: https://lkml.kernel.org/r/20211008091336.33616-4-jolsa@kernel.org

[fixed compile error reported by kernel test robot <lkp@intel.com>]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-10-20 23:44:43 -04:00

681 lines
18 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Dynamic function tracing support.
*
* Copyright (C) 2007-2008 Steven Rostedt <srostedt@redhat.com>
*
* Thanks goes to Ingo Molnar, for suggesting the idea.
* Mathieu Desnoyers, for suggesting postponing the modifications.
* Arjan van de Ven, for keeping me straight, and explaining to me
* the dangers of modifying code on the run.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/spinlock.h>
#include <linux/hardirq.h>
#include <linux/uaccess.h>
#include <linux/ftrace.h>
#include <linux/percpu.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/memory.h>
#include <linux/vmalloc.h>
#include <trace/syscall.h>
#include <asm/set_memory.h>
#include <asm/kprobes.h>
#include <asm/ftrace.h>
#include <asm/nops.h>
#include <asm/text-patching.h>
#ifdef CONFIG_DYNAMIC_FTRACE
static int ftrace_poke_late = 0;
int ftrace_arch_code_modify_prepare(void)
__acquires(&text_mutex)
{
/*
* Need to grab text_mutex to prevent a race from module loading
* and live kernel patching from changing the text permissions while
* ftrace has it set to "read/write".
*/
mutex_lock(&text_mutex);
ftrace_poke_late = 1;
return 0;
}
int ftrace_arch_code_modify_post_process(void)
__releases(&text_mutex)
{
/*
* ftrace_make_{call,nop}() may be called during
* module load, and we need to finish the text_poke_queue()
* that they do, here.
*/
text_poke_finish();
ftrace_poke_late = 0;
mutex_unlock(&text_mutex);
return 0;
}
static const char *ftrace_nop_replace(void)
{
return x86_nops[5];
}
static const char *ftrace_call_replace(unsigned long ip, unsigned long addr)
{
return text_gen_insn(CALL_INSN_OPCODE, (void *)ip, (void *)addr);
}
static int ftrace_verify_code(unsigned long ip, const char *old_code)
{
char cur_code[MCOUNT_INSN_SIZE];
/*
* Note:
* We are paranoid about modifying text, as if a bug was to happen, it
* could cause us to read or write to someplace that could cause harm.
* Carefully read and modify the code with probe_kernel_*(), and make
* sure what we read is what we expected it to be before modifying it.
*/
/* read the text we want to modify */
if (copy_from_kernel_nofault(cur_code, (void *)ip, MCOUNT_INSN_SIZE)) {
WARN_ON(1);
return -EFAULT;
}
/* Make sure it is what we expect it to be */
if (memcmp(cur_code, old_code, MCOUNT_INSN_SIZE) != 0) {
WARN_ON(1);
return -EINVAL;
}
return 0;
}
/*
* Marked __ref because it calls text_poke_early() which is .init.text. That is
* ok because that call will happen early, during boot, when .init sections are
* still present.
*/
static int __ref
ftrace_modify_code_direct(unsigned long ip, const char *old_code,
const char *new_code)
{
int ret = ftrace_verify_code(ip, old_code);
if (ret)
return ret;
/* replace the text with the new text */
if (ftrace_poke_late)
text_poke_queue((void *)ip, new_code, MCOUNT_INSN_SIZE, NULL);
else
text_poke_early((void *)ip, new_code, MCOUNT_INSN_SIZE);
return 0;
}
int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec, unsigned long addr)
{
unsigned long ip = rec->ip;
const char *new, *old;
old = ftrace_call_replace(ip, addr);
new = ftrace_nop_replace();
/*
* On boot up, and when modules are loaded, the MCOUNT_ADDR
* is converted to a nop, and will never become MCOUNT_ADDR
* again. This code is either running before SMP (on boot up)
* or before the code will ever be executed (module load).
* We do not want to use the breakpoint version in this case,
* just modify the code directly.
*/
if (addr == MCOUNT_ADDR)
return ftrace_modify_code_direct(ip, old, new);
/*
* x86 overrides ftrace_replace_code -- this function will never be used
* in this case.
*/
WARN_ONCE(1, "invalid use of ftrace_make_nop");
return -EINVAL;
}
int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
{
unsigned long ip = rec->ip;
const char *new, *old;
old = ftrace_nop_replace();
new = ftrace_call_replace(ip, addr);
/* Should only be called when module is loaded */
return ftrace_modify_code_direct(rec->ip, old, new);
}
/*
* Should never be called:
* As it is only called by __ftrace_replace_code() which is called by
* ftrace_replace_code() that x86 overrides, and by ftrace_update_code()
* which is called to turn mcount into nops or nops into function calls
* but not to convert a function from not using regs to one that uses
* regs, which ftrace_modify_call() is for.
*/
int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
unsigned long addr)
{
WARN_ON(1);
return -EINVAL;
}
int ftrace_update_ftrace_func(ftrace_func_t func)
{
unsigned long ip;
const char *new;
ip = (unsigned long)(&ftrace_call);
new = ftrace_call_replace(ip, (unsigned long)func);
text_poke_bp((void *)ip, new, MCOUNT_INSN_SIZE, NULL);
ip = (unsigned long)(&ftrace_regs_call);
new = ftrace_call_replace(ip, (unsigned long)func);
text_poke_bp((void *)ip, new, MCOUNT_INSN_SIZE, NULL);
return 0;
}
void ftrace_replace_code(int enable)
{
struct ftrace_rec_iter *iter;
struct dyn_ftrace *rec;
const char *new, *old;
int ret;
for_ftrace_rec_iter(iter) {
rec = ftrace_rec_iter_record(iter);
switch (ftrace_test_record(rec, enable)) {
case FTRACE_UPDATE_IGNORE:
default:
continue;
case FTRACE_UPDATE_MAKE_CALL:
old = ftrace_nop_replace();
break;
case FTRACE_UPDATE_MODIFY_CALL:
case FTRACE_UPDATE_MAKE_NOP:
old = ftrace_call_replace(rec->ip, ftrace_get_addr_curr(rec));
break;
}
ret = ftrace_verify_code(rec->ip, old);
if (ret) {
ftrace_bug(ret, rec);
return;
}
}
for_ftrace_rec_iter(iter) {
rec = ftrace_rec_iter_record(iter);
switch (ftrace_test_record(rec, enable)) {
case FTRACE_UPDATE_IGNORE:
default:
continue;
case FTRACE_UPDATE_MAKE_CALL:
case FTRACE_UPDATE_MODIFY_CALL:
new = ftrace_call_replace(rec->ip, ftrace_get_addr_new(rec));
break;
case FTRACE_UPDATE_MAKE_NOP:
new = ftrace_nop_replace();
break;
}
text_poke_queue((void *)rec->ip, new, MCOUNT_INSN_SIZE, NULL);
ftrace_update_record(rec, enable);
}
text_poke_finish();
}
void arch_ftrace_update_code(int command)
{
ftrace_modify_all_code(command);
}
/* Currently only x86_64 supports dynamic trampolines */
#ifdef CONFIG_X86_64
#ifdef CONFIG_MODULES
#include <linux/moduleloader.h>
/* Module allocation simplifies allocating memory for code */
static inline void *alloc_tramp(unsigned long size)
{
return module_alloc(size);
}
static inline void tramp_free(void *tramp)
{
module_memfree(tramp);
}
#else
/* Trampolines can only be created if modules are supported */
static inline void *alloc_tramp(unsigned long size)
{
return NULL;
}
static inline void tramp_free(void *tramp) { }
#endif
/* Defined as markers to the end of the ftrace default trampolines */
extern void ftrace_regs_caller_end(void);
extern void ftrace_regs_caller_ret(void);
extern void ftrace_caller_end(void);
extern void ftrace_caller_op_ptr(void);
extern void ftrace_regs_caller_op_ptr(void);
extern void ftrace_regs_caller_jmp(void);
/* movq function_trace_op(%rip), %rdx */
/* 0x48 0x8b 0x15 <offset-to-ftrace_trace_op (4 bytes)> */
#define OP_REF_SIZE 7
/*
* The ftrace_ops is passed to the function callback. Since the
* trampoline only services a single ftrace_ops, we can pass in
* that ops directly.
*
* The ftrace_op_code_union is used to create a pointer to the
* ftrace_ops that will be passed to the callback function.
*/
union ftrace_op_code_union {
char code[OP_REF_SIZE];
struct {
char op[3];
int offset;
} __attribute__((packed));
};
#define RET_SIZE 1
static unsigned long
create_trampoline(struct ftrace_ops *ops, unsigned int *tramp_size)
{
unsigned long start_offset;
unsigned long end_offset;
unsigned long op_offset;
unsigned long call_offset;
unsigned long jmp_offset;
unsigned long offset;
unsigned long npages;
unsigned long size;
unsigned long retq;
unsigned long *ptr;
void *trampoline;
void *ip;
/* 48 8b 15 <offset> is movq <offset>(%rip), %rdx */
unsigned const char op_ref[] = { 0x48, 0x8b, 0x15 };
union ftrace_op_code_union op_ptr;
int ret;
if (ops->flags & FTRACE_OPS_FL_SAVE_REGS) {
start_offset = (unsigned long)ftrace_regs_caller;
end_offset = (unsigned long)ftrace_regs_caller_end;
op_offset = (unsigned long)ftrace_regs_caller_op_ptr;
call_offset = (unsigned long)ftrace_regs_call;
jmp_offset = (unsigned long)ftrace_regs_caller_jmp;
} else {
start_offset = (unsigned long)ftrace_caller;
end_offset = (unsigned long)ftrace_caller_end;
op_offset = (unsigned long)ftrace_caller_op_ptr;
call_offset = (unsigned long)ftrace_call;
jmp_offset = 0;
}
size = end_offset - start_offset;
/*
* Allocate enough size to store the ftrace_caller code,
* the iret , as well as the address of the ftrace_ops this
* trampoline is used for.
*/
trampoline = alloc_tramp(size + RET_SIZE + sizeof(void *));
if (!trampoline)
return 0;
*tramp_size = size + RET_SIZE + sizeof(void *);
npages = DIV_ROUND_UP(*tramp_size, PAGE_SIZE);
/* Copy ftrace_caller onto the trampoline memory */
ret = copy_from_kernel_nofault(trampoline, (void *)start_offset, size);
if (WARN_ON(ret < 0))
goto fail;
ip = trampoline + size;
/* The trampoline ends with ret(q) */
retq = (unsigned long)ftrace_stub;
ret = copy_from_kernel_nofault(ip, (void *)retq, RET_SIZE);
if (WARN_ON(ret < 0))
goto fail;
/* No need to test direct calls on created trampolines */
if (ops->flags & FTRACE_OPS_FL_SAVE_REGS) {
/* NOP the jnz 1f; but make sure it's a 2 byte jnz */
ip = trampoline + (jmp_offset - start_offset);
if (WARN_ON(*(char *)ip != 0x75))
goto fail;
ret = copy_from_kernel_nofault(ip, x86_nops[2], 2);
if (ret < 0)
goto fail;
}
/*
* The address of the ftrace_ops that is used for this trampoline
* is stored at the end of the trampoline. This will be used to
* load the third parameter for the callback. Basically, that
* location at the end of the trampoline takes the place of
* the global function_trace_op variable.
*/
ptr = (unsigned long *)(trampoline + size + RET_SIZE);
*ptr = (unsigned long)ops;
op_offset -= start_offset;
memcpy(&op_ptr, trampoline + op_offset, OP_REF_SIZE);
/* Are we pointing to the reference? */
if (WARN_ON(memcmp(op_ptr.op, op_ref, 3) != 0))
goto fail;
/* Load the contents of ptr into the callback parameter */
offset = (unsigned long)ptr;
offset -= (unsigned long)trampoline + op_offset + OP_REF_SIZE;
op_ptr.offset = offset;
/* put in the new offset to the ftrace_ops */
memcpy(trampoline + op_offset, &op_ptr, OP_REF_SIZE);
/* put in the call to the function */
mutex_lock(&text_mutex);
call_offset -= start_offset;
memcpy(trampoline + call_offset,
text_gen_insn(CALL_INSN_OPCODE,
trampoline + call_offset,
ftrace_ops_get_func(ops)), CALL_INSN_SIZE);
mutex_unlock(&text_mutex);
/* ALLOC_TRAMP flags lets us know we created it */
ops->flags |= FTRACE_OPS_FL_ALLOC_TRAMP;
set_vm_flush_reset_perms(trampoline);
if (likely(system_state != SYSTEM_BOOTING))
set_memory_ro((unsigned long)trampoline, npages);
set_memory_x((unsigned long)trampoline, npages);
return (unsigned long)trampoline;
fail:
tramp_free(trampoline);
return 0;
}
void set_ftrace_ops_ro(void)
{
struct ftrace_ops *ops;
unsigned long start_offset;
unsigned long end_offset;
unsigned long npages;
unsigned long size;
do_for_each_ftrace_op(ops, ftrace_ops_list) {
if (!(ops->flags & FTRACE_OPS_FL_ALLOC_TRAMP))
continue;
if (ops->flags & FTRACE_OPS_FL_SAVE_REGS) {
start_offset = (unsigned long)ftrace_regs_caller;
end_offset = (unsigned long)ftrace_regs_caller_end;
} else {
start_offset = (unsigned long)ftrace_caller;
end_offset = (unsigned long)ftrace_caller_end;
}
size = end_offset - start_offset;
size = size + RET_SIZE + sizeof(void *);
npages = DIV_ROUND_UP(size, PAGE_SIZE);
set_memory_ro((unsigned long)ops->trampoline, npages);
} while_for_each_ftrace_op(ops);
}
static unsigned long calc_trampoline_call_offset(bool save_regs)
{
unsigned long start_offset;
unsigned long call_offset;
if (save_regs) {
start_offset = (unsigned long)ftrace_regs_caller;
call_offset = (unsigned long)ftrace_regs_call;
} else {
start_offset = (unsigned long)ftrace_caller;
call_offset = (unsigned long)ftrace_call;
}
return call_offset - start_offset;
}
void arch_ftrace_update_trampoline(struct ftrace_ops *ops)
{
ftrace_func_t func;
unsigned long offset;
unsigned long ip;
unsigned int size;
const char *new;
if (!ops->trampoline) {
ops->trampoline = create_trampoline(ops, &size);
if (!ops->trampoline)
return;
ops->trampoline_size = size;
return;
}
/*
* The ftrace_ops caller may set up its own trampoline.
* In such a case, this code must not modify it.
*/
if (!(ops->flags & FTRACE_OPS_FL_ALLOC_TRAMP))
return;
offset = calc_trampoline_call_offset(ops->flags & FTRACE_OPS_FL_SAVE_REGS);
ip = ops->trampoline + offset;
func = ftrace_ops_get_func(ops);
mutex_lock(&text_mutex);
/* Do a safe modify in case the trampoline is executing */
new = ftrace_call_replace(ip, (unsigned long)func);
text_poke_bp((void *)ip, new, MCOUNT_INSN_SIZE, NULL);
mutex_unlock(&text_mutex);
}
/* Return the address of the function the trampoline calls */
static void *addr_from_call(void *ptr)
{
union text_poke_insn call;
int ret;
ret = copy_from_kernel_nofault(&call, ptr, CALL_INSN_SIZE);
if (WARN_ON_ONCE(ret < 0))
return NULL;
/* Make sure this is a call */
if (WARN_ON_ONCE(call.opcode != CALL_INSN_OPCODE)) {
pr_warn("Expected E8, got %x\n", call.opcode);
return NULL;
}
return ptr + CALL_INSN_SIZE + call.disp;
}
void prepare_ftrace_return(unsigned long ip, unsigned long *parent,
unsigned long frame_pointer);
/*
* If the ops->trampoline was not allocated, then it probably
* has a static trampoline func, or is the ftrace caller itself.
*/
static void *static_tramp_func(struct ftrace_ops *ops, struct dyn_ftrace *rec)
{
unsigned long offset;
bool save_regs = rec->flags & FTRACE_FL_REGS_EN;
void *ptr;
if (ops && ops->trampoline) {
#if !defined(CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS) && \
defined(CONFIG_FUNCTION_GRAPH_TRACER)
/*
* We only know about function graph tracer setting as static
* trampoline.
*/
if (ops->trampoline == FTRACE_GRAPH_ADDR)
return (void *)prepare_ftrace_return;
#endif
return NULL;
}
offset = calc_trampoline_call_offset(save_regs);
if (save_regs)
ptr = (void *)FTRACE_REGS_ADDR + offset;
else
ptr = (void *)FTRACE_ADDR + offset;
return addr_from_call(ptr);
}
void *arch_ftrace_trampoline_func(struct ftrace_ops *ops, struct dyn_ftrace *rec)
{
unsigned long offset;
/* If we didn't allocate this trampoline, consider it static */
if (!ops || !(ops->flags & FTRACE_OPS_FL_ALLOC_TRAMP))
return static_tramp_func(ops, rec);
offset = calc_trampoline_call_offset(ops->flags & FTRACE_OPS_FL_SAVE_REGS);
return addr_from_call((void *)ops->trampoline + offset);
}
void arch_ftrace_trampoline_free(struct ftrace_ops *ops)
{
if (!ops || !(ops->flags & FTRACE_OPS_FL_ALLOC_TRAMP))
return;
tramp_free((void *)ops->trampoline);
ops->trampoline = 0;
}
#endif /* CONFIG_X86_64 */
#endif /* CONFIG_DYNAMIC_FTRACE */
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
#ifdef CONFIG_DYNAMIC_FTRACE
#ifndef CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS
extern void ftrace_graph_call(void);
static const char *ftrace_jmp_replace(unsigned long ip, unsigned long addr)
{
return text_gen_insn(JMP32_INSN_OPCODE, (void *)ip, (void *)addr);
}
static int ftrace_mod_jmp(unsigned long ip, void *func)
{
const char *new;
new = ftrace_jmp_replace(ip, (unsigned long)func);
text_poke_bp((void *)ip, new, MCOUNT_INSN_SIZE, NULL);
return 0;
}
int ftrace_enable_ftrace_graph_caller(void)
{
unsigned long ip = (unsigned long)(&ftrace_graph_call);
return ftrace_mod_jmp(ip, &ftrace_graph_caller);
}
int ftrace_disable_ftrace_graph_caller(void)
{
unsigned long ip = (unsigned long)(&ftrace_graph_call);
return ftrace_mod_jmp(ip, &ftrace_stub);
}
#else /* !CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS */
int ftrace_enable_ftrace_graph_caller(void)
{
return 0;
}
int ftrace_disable_ftrace_graph_caller(void)
{
return 0;
}
#endif /* CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS */
#endif /* !CONFIG_DYNAMIC_FTRACE */
/*
* Hook the return address and push it in the stack of return addrs
* in current thread info.
*/
void prepare_ftrace_return(unsigned long ip, unsigned long *parent,
unsigned long frame_pointer)
{
unsigned long return_hooker = (unsigned long)&return_to_handler;
int bit;
/*
* When resuming from suspend-to-ram, this function can be indirectly
* called from early CPU startup code while the CPU is in real mode,
* which would fail miserably. Make sure the stack pointer is a
* virtual address.
*
* This check isn't as accurate as virt_addr_valid(), but it should be
* good enough for this purpose, and it's fast.
*/
if (unlikely((long)__builtin_frame_address(0) >= 0))
return;
if (unlikely(ftrace_graph_is_dead()))
return;
if (unlikely(atomic_read(&current->tracing_graph_pause)))
return;
bit = ftrace_test_recursion_trylock(ip, *parent);
if (bit < 0)
return;
if (!function_graph_enter(*parent, ip, frame_pointer, parent))
*parent = return_hooker;
ftrace_test_recursion_unlock(bit);
}
#ifdef CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS
void ftrace_graph_func(unsigned long ip, unsigned long parent_ip,
struct ftrace_ops *op, struct ftrace_regs *fregs)
{
struct pt_regs *regs = &fregs->regs;
unsigned long *stack = (unsigned long *)kernel_stack_pointer(regs);
prepare_ftrace_return(ip, (unsigned long *)stack, 0);
}
#endif
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */