b7a96bb96f
This driver does not call i2c_smbus_read|write_byte_data(), so remove the corresponding functionality test. It uses regmap to handle byte transfers transparently. Signed-off-by: Alison Schofield <amsfield22@gmail.com> Reviewed-by:Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Matt Ranostay <matt.ranostay@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
468 lines
11 KiB
C
468 lines
11 KiB
C
/*
|
|
* JSA1212 Ambient Light & Proximity Sensor Driver
|
|
*
|
|
* Copyright (c) 2014, Intel Corporation.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* JSA1212 I2C slave address: 0x44(ADDR tied to GND), 0x45(ADDR tied to VDD)
|
|
*
|
|
* TODO: Interrupt support, thresholds, range support.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/module.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
|
|
/* JSA1212 reg address */
|
|
#define JSA1212_CONF_REG 0x01
|
|
#define JSA1212_INT_REG 0x02
|
|
#define JSA1212_PXS_LT_REG 0x03
|
|
#define JSA1212_PXS_HT_REG 0x04
|
|
#define JSA1212_ALS_TH1_REG 0x05
|
|
#define JSA1212_ALS_TH2_REG 0x06
|
|
#define JSA1212_ALS_TH3_REG 0x07
|
|
#define JSA1212_PXS_DATA_REG 0x08
|
|
#define JSA1212_ALS_DT1_REG 0x09
|
|
#define JSA1212_ALS_DT2_REG 0x0A
|
|
#define JSA1212_ALS_RNG_REG 0x0B
|
|
#define JSA1212_MAX_REG 0x0C
|
|
|
|
/* JSA1212 reg masks */
|
|
#define JSA1212_CONF_MASK 0xFF
|
|
#define JSA1212_INT_MASK 0xFF
|
|
#define JSA1212_PXS_LT_MASK 0xFF
|
|
#define JSA1212_PXS_HT_MASK 0xFF
|
|
#define JSA1212_ALS_TH1_MASK 0xFF
|
|
#define JSA1212_ALS_TH2_LT_MASK 0x0F
|
|
#define JSA1212_ALS_TH2_HT_MASK 0xF0
|
|
#define JSA1212_ALS_TH3_MASK 0xFF
|
|
#define JSA1212_PXS_DATA_MASK 0xFF
|
|
#define JSA1212_ALS_DATA_MASK 0x0FFF
|
|
#define JSA1212_ALS_DT1_MASK 0xFF
|
|
#define JSA1212_ALS_DT2_MASK 0x0F
|
|
#define JSA1212_ALS_RNG_MASK 0x07
|
|
|
|
/* JSA1212 CONF REG bits */
|
|
#define JSA1212_CONF_PXS_MASK 0x80
|
|
#define JSA1212_CONF_PXS_ENABLE 0x80
|
|
#define JSA1212_CONF_PXS_DISABLE 0x00
|
|
#define JSA1212_CONF_ALS_MASK 0x04
|
|
#define JSA1212_CONF_ALS_ENABLE 0x04
|
|
#define JSA1212_CONF_ALS_DISABLE 0x00
|
|
#define JSA1212_CONF_IRDR_MASK 0x08
|
|
/* Proxmity sensing IRDR current sink settings */
|
|
#define JSA1212_CONF_IRDR_200MA 0x08
|
|
#define JSA1212_CONF_IRDR_100MA 0x00
|
|
#define JSA1212_CONF_PXS_SLP_MASK 0x70
|
|
#define JSA1212_CONF_PXS_SLP_0MS 0x70
|
|
#define JSA1212_CONF_PXS_SLP_12MS 0x60
|
|
#define JSA1212_CONF_PXS_SLP_50MS 0x50
|
|
#define JSA1212_CONF_PXS_SLP_75MS 0x40
|
|
#define JSA1212_CONF_PXS_SLP_100MS 0x30
|
|
#define JSA1212_CONF_PXS_SLP_200MS 0x20
|
|
#define JSA1212_CONF_PXS_SLP_400MS 0x10
|
|
#define JSA1212_CONF_PXS_SLP_800MS 0x00
|
|
|
|
/* JSA1212 INT REG bits */
|
|
#define JSA1212_INT_CTRL_MASK 0x01
|
|
#define JSA1212_INT_CTRL_EITHER 0x00
|
|
#define JSA1212_INT_CTRL_BOTH 0x01
|
|
#define JSA1212_INT_ALS_PRST_MASK 0x06
|
|
#define JSA1212_INT_ALS_PRST_1CONV 0x00
|
|
#define JSA1212_INT_ALS_PRST_4CONV 0x02
|
|
#define JSA1212_INT_ALS_PRST_8CONV 0x04
|
|
#define JSA1212_INT_ALS_PRST_16CONV 0x06
|
|
#define JSA1212_INT_ALS_FLAG_MASK 0x08
|
|
#define JSA1212_INT_ALS_FLAG_CLR 0x00
|
|
#define JSA1212_INT_PXS_PRST_MASK 0x60
|
|
#define JSA1212_INT_PXS_PRST_1CONV 0x00
|
|
#define JSA1212_INT_PXS_PRST_4CONV 0x20
|
|
#define JSA1212_INT_PXS_PRST_8CONV 0x40
|
|
#define JSA1212_INT_PXS_PRST_16CONV 0x60
|
|
#define JSA1212_INT_PXS_FLAG_MASK 0x80
|
|
#define JSA1212_INT_PXS_FLAG_CLR 0x00
|
|
|
|
/* JSA1212 ALS RNG REG bits */
|
|
#define JSA1212_ALS_RNG_0_2048 0x00
|
|
#define JSA1212_ALS_RNG_0_1024 0x01
|
|
#define JSA1212_ALS_RNG_0_512 0x02
|
|
#define JSA1212_ALS_RNG_0_256 0x03
|
|
#define JSA1212_ALS_RNG_0_128 0x04
|
|
|
|
/* JSA1212 INT threshold range */
|
|
#define JSA1212_ALS_TH_MIN 0x0000
|
|
#define JSA1212_ALS_TH_MAX 0x0FFF
|
|
#define JSA1212_PXS_TH_MIN 0x00
|
|
#define JSA1212_PXS_TH_MAX 0xFF
|
|
|
|
#define JSA1212_ALS_DELAY_MS 200
|
|
#define JSA1212_PXS_DELAY_MS 100
|
|
|
|
#define JSA1212_DRIVER_NAME "jsa1212"
|
|
#define JSA1212_REGMAP_NAME "jsa1212_regmap"
|
|
|
|
enum jsa1212_op_mode {
|
|
JSA1212_OPMODE_ALS_EN,
|
|
JSA1212_OPMODE_PXS_EN,
|
|
};
|
|
|
|
struct jsa1212_data {
|
|
struct i2c_client *client;
|
|
struct mutex lock;
|
|
u8 als_rng_idx;
|
|
bool als_en; /* ALS enable status */
|
|
bool pxs_en; /* proximity enable status */
|
|
struct regmap *regmap;
|
|
};
|
|
|
|
/* ALS range idx to val mapping */
|
|
static const int jsa1212_als_range_val[] = {2048, 1024, 512, 256, 128,
|
|
128, 128, 128};
|
|
|
|
/* Enables or disables ALS function based on status */
|
|
static int jsa1212_als_enable(struct jsa1212_data *data, u8 status)
|
|
{
|
|
int ret;
|
|
|
|
ret = regmap_update_bits(data->regmap, JSA1212_CONF_REG,
|
|
JSA1212_CONF_ALS_MASK,
|
|
status);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
data->als_en = !!status;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Enables or disables PXS function based on status */
|
|
static int jsa1212_pxs_enable(struct jsa1212_data *data, u8 status)
|
|
{
|
|
int ret;
|
|
|
|
ret = regmap_update_bits(data->regmap, JSA1212_CONF_REG,
|
|
JSA1212_CONF_PXS_MASK,
|
|
status);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
data->pxs_en = !!status;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int jsa1212_read_als_data(struct jsa1212_data *data,
|
|
unsigned int *val)
|
|
{
|
|
int ret;
|
|
__le16 als_data;
|
|
|
|
ret = jsa1212_als_enable(data, JSA1212_CONF_ALS_ENABLE);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Delay for data output */
|
|
msleep(JSA1212_ALS_DELAY_MS);
|
|
|
|
/* Read 12 bit data */
|
|
ret = regmap_bulk_read(data->regmap, JSA1212_ALS_DT1_REG, &als_data, 2);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "als data read err\n");
|
|
goto als_data_read_err;
|
|
}
|
|
|
|
*val = le16_to_cpu(als_data);
|
|
|
|
als_data_read_err:
|
|
return jsa1212_als_enable(data, JSA1212_CONF_ALS_DISABLE);
|
|
}
|
|
|
|
static int jsa1212_read_pxs_data(struct jsa1212_data *data,
|
|
unsigned int *val)
|
|
{
|
|
int ret;
|
|
unsigned int pxs_data;
|
|
|
|
ret = jsa1212_pxs_enable(data, JSA1212_CONF_PXS_ENABLE);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Delay for data output */
|
|
msleep(JSA1212_PXS_DELAY_MS);
|
|
|
|
/* Read out all data */
|
|
ret = regmap_read(data->regmap, JSA1212_PXS_DATA_REG, &pxs_data);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "pxs data read err\n");
|
|
goto pxs_data_read_err;
|
|
}
|
|
|
|
*val = pxs_data & JSA1212_PXS_DATA_MASK;
|
|
|
|
pxs_data_read_err:
|
|
return jsa1212_pxs_enable(data, JSA1212_CONF_PXS_DISABLE);
|
|
}
|
|
|
|
static int jsa1212_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long mask)
|
|
{
|
|
int ret;
|
|
struct jsa1212_data *data = iio_priv(indio_dev);
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
mutex_lock(&data->lock);
|
|
switch (chan->type) {
|
|
case IIO_LIGHT:
|
|
ret = jsa1212_read_als_data(data, val);
|
|
break;
|
|
case IIO_PROXIMITY:
|
|
ret = jsa1212_read_pxs_data(data, val);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
mutex_unlock(&data->lock);
|
|
return ret < 0 ? ret : IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
switch (chan->type) {
|
|
case IIO_LIGHT:
|
|
*val = jsa1212_als_range_val[data->als_rng_idx];
|
|
*val2 = BIT(12); /* Max 12 bit value */
|
|
return IIO_VAL_FRACTIONAL;
|
|
default:
|
|
break;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const struct iio_chan_spec jsa1212_channels[] = {
|
|
{
|
|
.type = IIO_LIGHT,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
|
|
BIT(IIO_CHAN_INFO_SCALE),
|
|
},
|
|
{
|
|
.type = IIO_PROXIMITY,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
|
|
}
|
|
};
|
|
|
|
static const struct iio_info jsa1212_info = {
|
|
.driver_module = THIS_MODULE,
|
|
.read_raw = &jsa1212_read_raw,
|
|
};
|
|
|
|
static int jsa1212_chip_init(struct jsa1212_data *data)
|
|
{
|
|
int ret;
|
|
|
|
ret = regmap_write(data->regmap, JSA1212_CONF_REG,
|
|
(JSA1212_CONF_PXS_SLP_50MS |
|
|
JSA1212_CONF_IRDR_200MA));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = regmap_write(data->regmap, JSA1212_INT_REG,
|
|
JSA1212_INT_ALS_PRST_4CONV);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
data->als_rng_idx = JSA1212_ALS_RNG_0_2048;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool jsa1212_is_volatile_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case JSA1212_PXS_DATA_REG:
|
|
case JSA1212_ALS_DT1_REG:
|
|
case JSA1212_ALS_DT2_REG:
|
|
case JSA1212_INT_REG:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static const struct regmap_config jsa1212_regmap_config = {
|
|
.name = JSA1212_REGMAP_NAME,
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = JSA1212_MAX_REG,
|
|
.cache_type = REGCACHE_RBTREE,
|
|
.volatile_reg = jsa1212_is_volatile_reg,
|
|
};
|
|
|
|
static int jsa1212_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct jsa1212_data *data;
|
|
struct iio_dev *indio_dev;
|
|
struct regmap *regmap;
|
|
int ret;
|
|
|
|
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
regmap = devm_regmap_init_i2c(client, &jsa1212_regmap_config);
|
|
if (IS_ERR(regmap)) {
|
|
dev_err(&client->dev, "Regmap initialization failed.\n");
|
|
return PTR_ERR(regmap);
|
|
}
|
|
|
|
data = iio_priv(indio_dev);
|
|
|
|
i2c_set_clientdata(client, indio_dev);
|
|
data->client = client;
|
|
data->regmap = regmap;
|
|
|
|
mutex_init(&data->lock);
|
|
|
|
ret = jsa1212_chip_init(data);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
indio_dev->dev.parent = &client->dev;
|
|
indio_dev->channels = jsa1212_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(jsa1212_channels);
|
|
indio_dev->name = JSA1212_DRIVER_NAME;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
|
|
indio_dev->info = &jsa1212_info;
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret < 0)
|
|
dev_err(&client->dev, "%s: register device failed\n", __func__);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* power off the device */
|
|
static int jsa1212_power_off(struct jsa1212_data *data)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&data->lock);
|
|
|
|
ret = regmap_update_bits(data->regmap, JSA1212_CONF_REG,
|
|
JSA1212_CONF_ALS_MASK |
|
|
JSA1212_CONF_PXS_MASK,
|
|
JSA1212_CONF_ALS_DISABLE |
|
|
JSA1212_CONF_PXS_DISABLE);
|
|
|
|
if (ret < 0)
|
|
dev_err(&data->client->dev, "power off cmd failed\n");
|
|
|
|
mutex_unlock(&data->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int jsa1212_remove(struct i2c_client *client)
|
|
{
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(client);
|
|
struct jsa1212_data *data = iio_priv(indio_dev);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
|
|
return jsa1212_power_off(data);
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int jsa1212_suspend(struct device *dev)
|
|
{
|
|
struct jsa1212_data *data;
|
|
|
|
data = iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
|
|
|
|
return jsa1212_power_off(data);
|
|
}
|
|
|
|
static int jsa1212_resume(struct device *dev)
|
|
{
|
|
int ret = 0;
|
|
struct jsa1212_data *data;
|
|
|
|
data = iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
|
|
|
|
mutex_lock(&data->lock);
|
|
|
|
if (data->als_en) {
|
|
ret = jsa1212_als_enable(data, JSA1212_CONF_ALS_ENABLE);
|
|
if (ret < 0) {
|
|
dev_err(dev, "als resume failed\n");
|
|
goto unlock_and_ret;
|
|
}
|
|
}
|
|
|
|
if (data->pxs_en) {
|
|
ret = jsa1212_pxs_enable(data, JSA1212_CONF_PXS_ENABLE);
|
|
if (ret < 0)
|
|
dev_err(dev, "pxs resume failed\n");
|
|
}
|
|
|
|
unlock_and_ret:
|
|
mutex_unlock(&data->lock);
|
|
return ret;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(jsa1212_pm_ops, jsa1212_suspend, jsa1212_resume);
|
|
|
|
#define JSA1212_PM_OPS (&jsa1212_pm_ops)
|
|
#else
|
|
#define JSA1212_PM_OPS NULL
|
|
#endif
|
|
|
|
static const struct acpi_device_id jsa1212_acpi_match[] = {
|
|
{"JSA1212", 0},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, jsa1212_acpi_match);
|
|
|
|
static const struct i2c_device_id jsa1212_id[] = {
|
|
{ JSA1212_DRIVER_NAME, 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, jsa1212_id);
|
|
|
|
static struct i2c_driver jsa1212_driver = {
|
|
.driver = {
|
|
.name = JSA1212_DRIVER_NAME,
|
|
.pm = JSA1212_PM_OPS,
|
|
.acpi_match_table = ACPI_PTR(jsa1212_acpi_match),
|
|
},
|
|
.probe = jsa1212_probe,
|
|
.remove = jsa1212_remove,
|
|
.id_table = jsa1212_id,
|
|
};
|
|
module_i2c_driver(jsa1212_driver);
|
|
|
|
MODULE_AUTHOR("Sathya Kuppuswamy <sathyanarayanan.kuppuswamy@linux.intel.com>");
|
|
MODULE_DESCRIPTION("JSA1212 proximity/ambient light sensor driver");
|
|
MODULE_LICENSE("GPL v2");
|