linux/arch/arm
Lennert Buytenhek da01bba3cb [ARM] Orion: make PCI handling code deal with Cardbus slots
The Cardbus connector does not have an IDSEL signal, and Cardbus
cards are always the intended target of configuration transactions
on their local PCI bus.  This means that if the Orion's PCI bus
signals are hooked up to a Cardbus slot, the same set of PCI
functions will will appear 31 times, for each of the PCI device
IDs 1-31 (ID 0 is the host bridge).

This patch adds a function to the Orion PCI handling code that board
support code can call to enable Cardbus mode.  When Cardbus mode is
enabled, configuration transactions on the PCI local bus are only
allowed to PCI IDs 0 (host bridge) and 1 (cardbus device).

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-06-30 16:04:44 -04:00
..
boot [ARM] Feroceon: catch other Feroceon CPU IDs in head.S 2008-06-22 22:44:59 +02:00
common [ARM] 5026/1: locomo: add .settype for gpio and several small fixes 2008-05-17 22:53:54 +01:00
configs [ARM] mv78xx0: add defconfig 2008-06-22 22:45:10 +02:00
kernel [ARM] latencytop support 2008-06-22 22:44:36 +02:00
lib [ARM] cache align memset and memzero 2008-06-22 22:44:39 +02:00
mach-aaec2000 arch: Remove unnecessary inclusions of asm/semaphore.h 2008-04-18 22:14:49 -04:00
mach-at91 [ARM] 5052/1: export clock functions for the at91x40 2008-05-23 13:50:07 +01:00
mach-clps711x [ARM] Add initial sparsemem support 2008-04-19 11:36:48 +01:00
mach-clps7500 [ARM] Fix timer damage from d3d74453c3 2008-01-28 10:17:12 +00:00
mach-davinci arm: use non-racy method for /proc/davinci_clocks creation 2008-04-29 08:06:21 -07:00
mach-ebsa110 [ARM] Fix timer damage from d3d74453c3 2008-01-28 10:17:12 +00:00
mach-ep93xx [ARM] 5023/1: Fix broken gpio interrupts on ep93xx 2008-05-04 11:06:05 +01:00
mach-footbridge [ARM] Fix timer damage from d3d74453c3 2008-01-28 10:17:12 +00:00
mach-h720x [ARM] replace remaining __FUNCTION__ occurrences 2008-03-06 12:18:18 +00:00
mach-imx [ARM] replace remaining __FUNCTION__ occurrences 2008-03-06 12:18:18 +00:00
mach-integrator [ARM] integrator: fix build warnings and errors 2008-05-23 19:35:52 +01:00
mach-iop13xx [ARM] replace remaining __FUNCTION__ occurrences 2008-03-06 12:18:18 +00:00
mach-iop32x i2c: Convert most new-style drivers to use module aliasing 2008-04-29 23:11:40 +02:00
mach-iop33x iop: unconditionally initialize the ATU on platforms known to be 'hosts' 2008-03-26 12:33:41 -07:00
mach-ixp4xx Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 2008-04-30 08:45:48 -07:00
mach-ixp23xx [ARM] remove duplicate includes 2008-01-26 14:50:07 +00:00
mach-ixp2000 [ARM] Fix timer damage from d3d74453c3 2008-01-28 10:17:12 +00:00
mach-kirkwood [ARM] Kirkwood: support L2 writeback mode 2008-06-30 14:25:24 -04:00
mach-ks8695 [ARM] 4981/1: [KS8695] Simple LED driver 2008-04-17 15:58:25 +01:00
mach-l7200
mach-lh7a40x [ARM] fix lh7a40x/kev7a400 build 2008-04-20 16:40:47 +01:00
mach-loki [ARM] add Marvell Loki (88RC8480) SoC support 2008-06-22 22:45:02 +02:00
mach-msm [ARM] msm: dma support for MSM7X00A 2008-01-26 14:39:14 +00:00
mach-mv78xx0 [ARM] add Marvell 78xx0 ARM SoC support 2008-06-22 22:45:10 +02:00
mach-mx3 [ARM] Fix timer damage from d3d74453c3 2008-01-28 10:17:12 +00:00
mach-netx [ARM] replace remaining __FUNCTION__ occurrences 2008-03-06 12:18:18 +00:00
mach-ns9xxx Merge branch 'irq-fix' of git://www.modarm9.com/gitsrc/pub/people/ukleinek/linux-2.6.git 2008-05-07 21:55:01 +01:00
mach-omap1 [ARM] 5038/1: ARM: OMAP: Remove tsc2102 references from board-palmte.c 2008-05-22 14:10:35 +01:00
mach-omap2 ARM: OMAP: Fixed comments on global PRM register usage 2008-05-09 10:25:04 -07:00
mach-orion5x [ARM] Orion: make PCI handling code deal with Cardbus slots 2008-06-30 16:04:44 -04:00
mach-pnx4008 arch: Remove unnecessary inclusions of asm/semaphore.h 2008-04-18 22:14:49 -04:00
mach-pxa [ARM] 5077/1: spi: fix list scan success verification in PXA ssp driver 2008-06-11 23:38:46 +01:00
mach-realview Merge branch 'semaphore' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc 2008-04-21 15:41:27 -07:00
mach-rpc Rename: linux/pata_platform.h to linux/ata_platform.h 2008-02-06 06:54:17 -05:00
mach-s3c2400
mach-s3c2410 [ARM] 5041/1: VR1000: Fix DM9000 IRQ flags initialisation 2008-05-22 14:10:37 +01:00
mach-s3c2412 [ARM] 4985/1: S3C2412: Fix ARMDIVN name in CLKDIVN definition. 2008-04-17 17:04:38 +01:00
mach-s3c2440 [ARM] 4986/1: S3C24XX: Simtec machines need UCLK as parent to DCLK 2008-04-17 17:04:40 +01:00
mach-s3c2442 [ARM] 4794/1: S3C24XX: Comonise S3C2440 and S3C2442 clock code 2008-01-28 13:20:52 +00:00
mach-s3c2443 Driver core: change sysdev classes to use dynamic kobject names 2008-01-24 20:40:40 -08:00
mach-sa1100 [ARM] 5025/2: fix collie cpu initialisation 2008-05-22 14:03:20 +01:00
mach-shark [ARM] Fix timer damage from d3d74453c3 2008-01-28 10:17:12 +00:00
mach-versatile arch: Remove unnecessary inclusions of asm/semaphore.h 2008-04-18 22:14:49 -04:00
mm [ARM] add Marvell 78xx0 ARM SoC support 2008-06-22 22:45:10 +02:00
nwfpe
oprofile [ARM] 5018/1: RealView: Fix the ARM11MPCore Oprofile compilation 2008-04-28 17:03:34 +01:00
plat-iop iop: unconditionally initialize the ATU on platforms known to be 'hosts' 2008-03-26 12:33:41 -07:00
plat-mxc [ARM] 4887/1: i.MXC family: Separate current platform code 2008-04-17 16:15:17 +01:00
plat-omap [ARM] omap: fix omap clk support build errors 2008-05-22 16:38:50 +01:00
plat-orion [ARM] Orion: PCIe x4/x1 detection support 2008-06-22 22:45:09 +02:00
plat-s3c
plat-s3c24xx [ARM] 5039/1: S3C244X: Rename SDI device if running on S3C244X. 2008-05-22 14:17:22 +01:00
tools [ARM] Update mach-types 2008-04-19 11:28:05 +01:00
vfp [ARM] 4583/1: ARMv7: Add VFPv3 support 2008-01-26 14:41:28 +00:00
Kconfig [ARM] add Marvell 78xx0 ARM SoC support 2008-06-22 22:45:10 +02:00
Kconfig-nommu
Kconfig.debug [ARM] CONFIG_DEBUG_STACK_USAGE 2008-01-26 14:50:06 +00:00
Makefile [ARM] add Marvell 78xx0 ARM SoC support 2008-06-22 22:45:10 +02:00