linux

iv/linux

History

Linus Torvalds dda0ba40da nolibc pull request for v6.1

This pull request provides nolibc updates, most notably greatly improved
 testing.  These tests are located in tools/testing/selftests/nolibc.  The
 output of "make help" is as follows:
 
 	Supported targets under selftests/nolibc:
 	  all          call the "run" target below
 	  help         this help
 	  sysroot      create the nolibc sysroot here (uses $ARCH)
 	  nolibc-test  build the executable (uses $CC and $CROSS_COMPILE)
 	  initramfs    prepare the initramfs with nolibc-test
 	  defconfig    create a fresh new default config (uses $ARCH)
 	  kernel       (re)build the kernel with the initramfs (uses $ARCH)
 	  run          runs the kernel in QEMU after building it (uses $ARCH, $TEST)
 	  rerun        runs a previously prebuilt kernel in QEMU (uses $ARCH, $TEST)
 	  clean        clean the sysroot, initramfs, build and output files
 
 	The output file is "run.out". Test ranges may be passed using $TEST.
 
 	Currently using the following variables:
 	  ARCH          = x86
 	  CROSS_COMPILE =
 	  CC            = gcc
 	  OUTPUT        = /home/git/linux-rcu/tools/testing/selftests/nolibc/
 	  TEST          =
 	  QEMU_ARCH     = x86_64 [determined from $ARCH]
 	  IMAGE_NAME    = bzImage [determined from $ARCH]
 
 The output of a successful x86 "make run" is currently as follows,
 with kernel build output omitted:
 
 	$ make run
 	71 test(s) passed.
 	$
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmM5AeATHHBhdWxtY2tA
 a2VybmVsLm9yZwAKCRCevxLzctn7jJCLD/wIps8OlIvNMlvT0Bwmi1gG6kTdJrXb
 Cj495z9F1P8c1x2nZBVuwPM05KM4SUvMLBzkND8le/AqrDP2Vc9WurEjnx6aYbjw
 aNrWeeVOYF2ykROpEyolF92bV0tu2aZEYmZ12Rxb3ybKYW8wf5t2M6JbU9VvLATB
 TNPov6cBUjJLqF5AVf4pJ3FNjGJH392NyTzGuKFYN4kK8XGPSxKFfpb8jJX/Jnr/
 OQPZZurHclgIJzWYwjWpWBY5NBEMSUI8K2KqQIFzeVdNGpWmAyAyciCDG3zD+Rp1
 GtcHrPEgvBQnPd5o89eZonMPHkIC5kOVU3Ebwzzx30GWQO8cseCZCb9foJCu918q
 wbJYPvopDw1Kd7NtltTzWj/xWkINgBcqdki5bEtcOW8i71RX8tgzUVx/tz771Vok
 /j21se9Svwi8ZnAY+dTxMNdy0Jd7eI0dJO6fMzagrQamDKZzNaO50WjiCW53/Eln
 JSttwSneWJ190PJ5ty6lNQ6OLGuILSXWhbYzRplgHiEcSwjtpxccgMRkiNQlQiow
 hXRNKQU/A7q3b5HPpf/kdQFGEk/aqFNDTpTuz1JCsCY2f9WQ6qz5stQuUKfFxyVh
 YD82JBI1DHtucs5dD/4ZbparHrJGG/NsHoe61wZYpXVrcJWfB0bMiie3zQ1cGoWN
 t6lw39lNotQbsw==
 =wqBE
 -----END PGP SIGNATURE-----

Merge tag 'nolibc.2022.09.30a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu

Pull nolibc updates from Paul McKenney:
 "Most notably greatly improved testing. These tests are located in
  tools/testing/selftests/nolibc. The output of "make help" is as
  follows:

    Supported targets under selftests/nolibc:
      all          call the "run" target below
      help         this help
      sysroot      create the nolibc sysroot here (uses $ARCH)
      nolibc-test  build the executable (uses $CC and $CROSS_COMPILE)
      initramfs    prepare the initramfs with nolibc-test
      defconfig    create a fresh new default config (uses $ARCH)
      kernel       (re)build the kernel with the initramfs (uses $ARCH)
      run          runs the kernel in QEMU after building it (uses $ARCH, $TEST)
      rerun        runs a previously prebuilt kernel in QEMU (uses $ARCH, $TEST)
      clean        clean the sysroot, initramfs, build and output files

    The output file is "run.out". Test ranges may be passed using $TEST.

    Currently using the following variables:
      ARCH          = x86
      CROSS_COMPILE =
      CC            = gcc
      OUTPUT        = /home/git/linux-rcu/tools/testing/selftests/nolibc/
      TEST          =
      QEMU_ARCH     = x86_64 [determined from $ARCH]
      IMAGE_NAME    = bzImage [determined from $ARCH]

  The output of a successful x86 "make run" is currently as follows,
  with kernel build output omitted:

    $ make run
    71 test(s) passed."

* tag 'nolibc.2022.09.30a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  selftests/nolibc: Avoid generated files being committed
  selftests/nolibc: add a "help" target
  selftests/nolibc: "sysroot" target installs a local copy of the sysroot
  selftests/nolibc: add a "run" target to start the kernel in QEMU
  selftests/nolibc: add a "defconfig" target
  selftests/nolibc: add a "kernel" target to build the kernel with the initramfs
  selftests/nolibc: support glibc as well
  selftests/nolibc: condition some tests on /proc existence
  selftests/nolibc: recreate and populate /dev and /proc if missing
  selftests/nolibc: on x86, support exiting with isa-debug-exit
  selftests/nolibc: exit with poweroff on success when getpid() == 1
  selftests/nolibc: add a few tests for some libc functions
  selftests/nolibc: implement a few tests for various syscalls
  selftests/nolibc: support a test definition format
  selftests/nolibc: add basic infrastructure to ease creation of nolibc tests
  tools/nolibc: make sys_mmap() automatically use the right __NR_mmap definition
  tools/nolibc: fix build warning in sys_mmap() when my_syscall6 is not defined
  tools/nolibc: make argc 32-bit in riscv startup code

2022-10-03 10:01:19 -07:00

asm

nds32: Remove the architecture

2022-03-07 13:54:59 +01:00

asm-generic

bitops: wrap non-atomic bitops with a transparent macro

2022-06-30 19:52:41 -07:00

linux

tools: fix compilation after gfp_types.h split

2022-09-11 16:22:31 -07:00

nolibc

tools/nolibc: make sys_mmap() automatically use the right __NR_mmap definition