ddba6c7f7e
LCD config for old omapfb driver is passed with OMAP_TAG_LCD from board files or from the bootloader. In an effort to remove OMAP_TAG_LCD, this patch adds omapfb_set_lcd_config() function that the board files can call to set the LCD config. This has the drawback that configuration can no longer come from the bootloader. Of the boards supported by the kernel, this should only affect N770 which depends on the data from the bootloader. This patch adds an LCD config for N770 to its board files, but that is most probably broken. Fixing this would need information about the HW setup in N770 boards. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
271 lines
6.5 KiB
C
271 lines
6.5 KiB
C
/*
|
|
* linux/arch/arm/mach-omap1/board-palmte.c
|
|
*
|
|
* Modified from board-generic.c
|
|
*
|
|
* Support for the Palm Tungsten E PDA.
|
|
*
|
|
* Original version : Laurent Gonzalez
|
|
*
|
|
* Maintainers : http://palmtelinux.sf.net
|
|
* palmtelinux-developpers@lists.sf.net
|
|
*
|
|
* Copyright (c) 2006 Andrzej Zaborowski <balrog@zabor.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#include <linux/gpio.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/input.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/apm-emulation.h>
|
|
#include <linux/omapfb.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include <plat/flash.h>
|
|
#include <plat/mux.h>
|
|
#include <plat/usb.h>
|
|
#include <plat/tc.h>
|
|
#include <plat/dma.h>
|
|
#include <plat/board.h>
|
|
#include <plat/irda.h>
|
|
#include <plat/keypad.h>
|
|
#include "common.h"
|
|
|
|
#define PALMTE_USBDETECT_GPIO 0
|
|
#define PALMTE_USB_OR_DC_GPIO 1
|
|
#define PALMTE_TSC_GPIO 4
|
|
#define PALMTE_PINTDAV_GPIO 6
|
|
#define PALMTE_MMC_WP_GPIO 8
|
|
#define PALMTE_MMC_POWER_GPIO 9
|
|
#define PALMTE_HDQ_GPIO 11
|
|
#define PALMTE_HEADPHONES_GPIO 14
|
|
#define PALMTE_SPEAKER_GPIO 15
|
|
#define PALMTE_DC_GPIO OMAP_MPUIO(2)
|
|
#define PALMTE_MMC_SWITCH_GPIO OMAP_MPUIO(4)
|
|
#define PALMTE_MMC1_GPIO OMAP_MPUIO(6)
|
|
#define PALMTE_MMC2_GPIO OMAP_MPUIO(7)
|
|
#define PALMTE_MMC3_GPIO OMAP_MPUIO(11)
|
|
|
|
static const unsigned int palmte_keymap[] = {
|
|
KEY(0, 0, KEY_F1), /* Calendar */
|
|
KEY(1, 0, KEY_F2), /* Contacts */
|
|
KEY(2, 0, KEY_F3), /* Tasks List */
|
|
KEY(3, 0, KEY_F4), /* Note Pad */
|
|
KEY(4, 0, KEY_POWER),
|
|
KEY(0, 1, KEY_LEFT),
|
|
KEY(1, 1, KEY_DOWN),
|
|
KEY(2, 1, KEY_UP),
|
|
KEY(3, 1, KEY_RIGHT),
|
|
KEY(4, 1, KEY_ENTER),
|
|
};
|
|
|
|
static const struct matrix_keymap_data palmte_keymap_data = {
|
|
.keymap = palmte_keymap,
|
|
.keymap_size = ARRAY_SIZE(palmte_keymap),
|
|
};
|
|
|
|
static struct omap_kp_platform_data palmte_kp_data = {
|
|
.rows = 8,
|
|
.cols = 8,
|
|
.keymap_data = &palmte_keymap_data,
|
|
.rep = true,
|
|
.delay = 12,
|
|
};
|
|
|
|
static struct resource palmte_kp_resources[] = {
|
|
[0] = {
|
|
.start = INT_KEYBOARD,
|
|
.end = INT_KEYBOARD,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device palmte_kp_device = {
|
|
.name = "omap-keypad",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &palmte_kp_data,
|
|
},
|
|
.num_resources = ARRAY_SIZE(palmte_kp_resources),
|
|
.resource = palmte_kp_resources,
|
|
};
|
|
|
|
static struct mtd_partition palmte_rom_partitions[] = {
|
|
/* PalmOS "Small ROM", contains the bootloader and the debugger */
|
|
{
|
|
.name = "smallrom",
|
|
.offset = 0,
|
|
.size = 0xa000,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
},
|
|
/* PalmOS "Big ROM", a filesystem with all the OS code and data */
|
|
{
|
|
.name = "bigrom",
|
|
.offset = SZ_128K,
|
|
/*
|
|
* 0x5f0000 bytes big in the multi-language ("EFIGS") version,
|
|
* 0x7b0000 bytes in the English-only ("enUS") version.
|
|
*/
|
|
.size = 0x7b0000,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
},
|
|
};
|
|
|
|
static struct physmap_flash_data palmte_rom_data = {
|
|
.width = 2,
|
|
.set_vpp = omap1_set_vpp,
|
|
.parts = palmte_rom_partitions,
|
|
.nr_parts = ARRAY_SIZE(palmte_rom_partitions),
|
|
};
|
|
|
|
static struct resource palmte_rom_resource = {
|
|
.start = OMAP_CS0_PHYS,
|
|
.end = OMAP_CS0_PHYS + SZ_8M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct platform_device palmte_rom_device = {
|
|
.name = "physmap-flash",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &palmte_rom_data,
|
|
},
|
|
.num_resources = 1,
|
|
.resource = &palmte_rom_resource,
|
|
};
|
|
|
|
static struct platform_device palmte_lcd_device = {
|
|
.name = "lcd_palmte",
|
|
.id = -1,
|
|
};
|
|
|
|
static struct omap_backlight_config palmte_backlight_config = {
|
|
.default_intensity = 0xa0,
|
|
};
|
|
|
|
static struct platform_device palmte_backlight_device = {
|
|
.name = "omap-bl",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &palmte_backlight_config,
|
|
},
|
|
};
|
|
|
|
static struct omap_irda_config palmte_irda_config = {
|
|
.transceiver_cap = IR_SIRMODE,
|
|
.rx_channel = OMAP_DMA_UART3_RX,
|
|
.tx_channel = OMAP_DMA_UART3_TX,
|
|
.dest_start = UART3_THR,
|
|
.src_start = UART3_RHR,
|
|
.tx_trigger = 0,
|
|
.rx_trigger = 0,
|
|
};
|
|
|
|
static struct resource palmte_irda_resources[] = {
|
|
[0] = {
|
|
.start = INT_UART3,
|
|
.end = INT_UART3,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device palmte_irda_device = {
|
|
.name = "omapirda",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &palmte_irda_config,
|
|
},
|
|
.num_resources = ARRAY_SIZE(palmte_irda_resources),
|
|
.resource = palmte_irda_resources,
|
|
};
|
|
|
|
static struct platform_device *palmte_devices[] __initdata = {
|
|
&palmte_rom_device,
|
|
&palmte_kp_device,
|
|
&palmte_lcd_device,
|
|
&palmte_backlight_device,
|
|
&palmte_irda_device,
|
|
};
|
|
|
|
static struct omap_usb_config palmte_usb_config __initdata = {
|
|
.register_dev = 1, /* Mini-B only receptacle */
|
|
.hmc_mode = 0,
|
|
.pins[0] = 2,
|
|
};
|
|
|
|
static struct omap_lcd_config palmte_lcd_config __initdata = {
|
|
.ctrl_name = "internal",
|
|
};
|
|
|
|
static struct spi_board_info palmte_spi_info[] __initdata = {
|
|
{
|
|
.modalias = "tsc2102",
|
|
.bus_num = 2, /* uWire (officially) */
|
|
.chip_select = 0, /* As opposed to 3 */
|
|
.irq = OMAP_GPIO_IRQ(PALMTE_PINTDAV_GPIO),
|
|
.max_speed_hz = 8000000,
|
|
},
|
|
};
|
|
|
|
static void __init palmte_misc_gpio_setup(void)
|
|
{
|
|
/* Set TSC2102 PINTDAV pin as input (used by TSC2102 driver) */
|
|
if (gpio_request(PALMTE_PINTDAV_GPIO, "TSC2102 PINTDAV") < 0) {
|
|
printk(KERN_ERR "Could not reserve PINTDAV GPIO!\n");
|
|
return;
|
|
}
|
|
gpio_direction_input(PALMTE_PINTDAV_GPIO);
|
|
|
|
/* Set USB-or-DC-IN pin as input (unused) */
|
|
if (gpio_request(PALMTE_USB_OR_DC_GPIO, "USB/DC-IN") < 0) {
|
|
printk(KERN_ERR "Could not reserve cable signal GPIO!\n");
|
|
return;
|
|
}
|
|
gpio_direction_input(PALMTE_USB_OR_DC_GPIO);
|
|
}
|
|
|
|
static void __init omap_palmte_init(void)
|
|
{
|
|
/* mux pins for uarts */
|
|
omap_cfg_reg(UART1_TX);
|
|
omap_cfg_reg(UART1_RTS);
|
|
omap_cfg_reg(UART2_TX);
|
|
omap_cfg_reg(UART2_RTS);
|
|
omap_cfg_reg(UART3_TX);
|
|
omap_cfg_reg(UART3_RX);
|
|
|
|
platform_add_devices(palmte_devices, ARRAY_SIZE(palmte_devices));
|
|
|
|
spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info));
|
|
palmte_misc_gpio_setup();
|
|
omap_serial_init();
|
|
omap1_usb_init(&palmte_usb_config);
|
|
omap_register_i2c_bus(1, 100, NULL, 0);
|
|
|
|
omapfb_set_lcd_config(&palmte_lcd_config);
|
|
}
|
|
|
|
MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
|
|
.atag_offset = 0x100,
|
|
.map_io = omap15xx_map_io,
|
|
.init_early = omap1_init_early,
|
|
.reserve = omap_reserve,
|
|
.init_irq = omap1_init_irq,
|
|
.init_machine = omap_palmte_init,
|
|
.timer = &omap1_timer,
|
|
.restart = omap1_restart,
|
|
MACHINE_END
|