Sergey Matyukevich de624a355d qtnfmac: add support for 4addr mode
Advertise WIPHY_FLAG_4ADDR_STATION capability to wireless core. Send
use4addr interface change flag to firmware in change_virtual_intf
cfg80211 callback.

In order to enable adding wireless station interface to bridge
one should turn on 4addr mode using the following command:
$ iw dev wlan0 set 4addr on
$ brctl addif br0 wlan0

If this commands succeeds, then interface can be added to bridge.
Note that when wireless interface is added to bridge, wpa_supplicant
should be started with appropriate -b <brname> parameter, e.g:
$ wpa_supplicant -Dnl80211 -iwlan0 -c/path/to/wpa.conf -b br0

Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-01 14:11:55 +02:00
..
2018-12-19 09:40:13 +01:00
2019-01-02 18:47:56 -08:00
2019-01-10 13:39:19 +02:00
2018-12-31 17:32:35 -08:00
2018-12-29 08:20:44 -07:00
2018-12-27 10:43:24 -08:00
2018-12-27 10:43:24 -08:00
2019-01-05 11:28:39 -08:00
2019-01-05 18:25:19 -08:00
2018-12-28 20:54:57 -08:00
2018-12-29 13:03:29 -08:00
2018-12-28 13:19:59 -08:00
2019-01-01 15:55:29 -08:00
2018-12-29 09:40:40 -08:00
2018-12-25 14:52:50 -08:00
2019-01-05 11:30:37 -08:00
2018-12-28 16:52:18 -08:00
2018-12-28 16:52:18 -08:00
2018-12-29 12:03:17 -08:00
2019-02-01 14:11:55 +02:00
2019-01-05 17:57:34 -08:00
2019-01-05 11:23:17 -08:00
2018-12-29 13:03:29 -08:00
2018-12-28 20:54:57 -08:00
2018-12-24 12:06:56 +01:00
2019-01-01 13:24:31 -08:00
2018-12-31 17:32:35 -08:00
2018-12-25 14:43:54 -08:00
2018-12-28 14:48:06 -08:00
2018-12-31 13:06:30 -08:00
2019-01-05 11:30:37 -08:00
2018-12-28 20:54:57 -08:00
2019-01-05 17:57:34 -08:00
2019-01-01 15:55:29 -08:00
2019-01-05 18:15:37 -08:00
2019-01-01 13:16:45 -08:00
2018-12-29 13:40:29 -08:00