45ae272a94
The TVAL register is 32 bit signed. Thus only the lower 31 bits are
available to specify when an interrupt is to occur at some time in the
near future. Attempting to specify a larger interval with TVAL results
in a negative time delta which means the timer fires immediately upon
being programmed, rather than firing at that expected future time.
The solution is for Linux to declare that TVAL is a 31 bit register rather
than give its true size of 32 bits. This prevents Linux from programming
TVAL with a too-large value. Note that, prior to 5.16, this little trick
was the standard way to handle TVAL in Linux, so there is nothing new
happening here on that front.
The softlockup detector hides the issue, because it keeps generating
short timer deadlines that are within the scope of the broken timer.
Disable it, and you start using NO_HZ with much longer timer deadlines,
which turns into an interrupt flood:
11: 1124855130 949168462 758009394 76417474 104782230 30210281
310890 1734323687 GICv2 29 Level arch_timer
And "much longer" isn't that long: it takes less than 43s to underflow
TVAL at 50MHz (the frequency of the counter on XGene-1).
Some comments on the v1 version of this patch by Marc Zyngier:
XGene implements CVAL (a 64bit comparator) in terms of TVAL (a countdown
register) instead of the other way around. TVAL being a 32bit register,
the width of the counter should equally be 32. However, TVAL is a
*signed* value, and keeps counting down in the negative range once the
timer fires.
It means that any TVAL value with bit 31 set will fire immediately,
as it cannot be distinguished from an already expired timer. Reducing
the timer range back to a paltry 31 bits papers over the issue.
Another problem cannot be fixed though, which is that the timer interrupt
*must* be handled within the negative countdown period, or the interrupt
will be lost (TVAL will rollover to a positive value, indicative of a
new timer deadline).
Cc: stable@vger.kernel.org # 5.16+
Fixes: 012f188504
("clocksource/drivers/arm_arch_timer: Work around broken CVAL implementations")
Signed-off-by: Joe Korty <joe.korty@concurrent-rt.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
[maz: revamped the commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221024165422.GA51107@zipoli.concurrent-rt.com
Link: https://lore.kernel.org/r/20221121145343.896018-1-maz@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
1784 lines
46 KiB
C
1784 lines
46 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* linux/drivers/clocksource/arm_arch_timer.c
|
|
*
|
|
* Copyright (C) 2011 ARM Ltd.
|
|
* All Rights Reserved
|
|
*/
|
|
|
|
#define pr_fmt(fmt) "arch_timer: " fmt
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/device.h>
|
|
#include <linux/smp.h>
|
|
#include <linux/cpu.h>
|
|
#include <linux/cpu_pm.h>
|
|
#include <linux/clockchips.h>
|
|
#include <linux/clocksource.h>
|
|
#include <linux/clocksource_ids.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/io.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/sched/clock.h>
|
|
#include <linux/sched_clock.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/arm-smccc.h>
|
|
#include <linux/ptp_kvm.h>
|
|
|
|
#include <asm/arch_timer.h>
|
|
#include <asm/virt.h>
|
|
|
|
#include <clocksource/arm_arch_timer.h>
|
|
|
|
#define CNTTIDR 0x08
|
|
#define CNTTIDR_VIRT(n) (BIT(1) << ((n) * 4))
|
|
|
|
#define CNTACR(n) (0x40 + ((n) * 4))
|
|
#define CNTACR_RPCT BIT(0)
|
|
#define CNTACR_RVCT BIT(1)
|
|
#define CNTACR_RFRQ BIT(2)
|
|
#define CNTACR_RVOFF BIT(3)
|
|
#define CNTACR_RWVT BIT(4)
|
|
#define CNTACR_RWPT BIT(5)
|
|
|
|
#define CNTPCT_LO 0x00
|
|
#define CNTVCT_LO 0x08
|
|
#define CNTFRQ 0x10
|
|
#define CNTP_CVAL_LO 0x20
|
|
#define CNTP_CTL 0x2c
|
|
#define CNTV_CVAL_LO 0x30
|
|
#define CNTV_CTL 0x3c
|
|
|
|
/*
|
|
* The minimum amount of time a generic counter is guaranteed to not roll over
|
|
* (40 years)
|
|
*/
|
|
#define MIN_ROLLOVER_SECS (40ULL * 365 * 24 * 3600)
|
|
|
|
static unsigned arch_timers_present __initdata;
|
|
|
|
struct arch_timer {
|
|
void __iomem *base;
|
|
struct clock_event_device evt;
|
|
};
|
|
|
|
static struct arch_timer *arch_timer_mem __ro_after_init;
|
|
|
|
#define to_arch_timer(e) container_of(e, struct arch_timer, evt)
|
|
|
|
static u32 arch_timer_rate __ro_after_init;
|
|
static int arch_timer_ppi[ARCH_TIMER_MAX_TIMER_PPI] __ro_after_init;
|
|
|
|
static const char *arch_timer_ppi_names[ARCH_TIMER_MAX_TIMER_PPI] = {
|
|
[ARCH_TIMER_PHYS_SECURE_PPI] = "sec-phys",
|
|
[ARCH_TIMER_PHYS_NONSECURE_PPI] = "phys",
|
|
[ARCH_TIMER_VIRT_PPI] = "virt",
|
|
[ARCH_TIMER_HYP_PPI] = "hyp-phys",
|
|
[ARCH_TIMER_HYP_VIRT_PPI] = "hyp-virt",
|
|
};
|
|
|
|
static struct clock_event_device __percpu *arch_timer_evt;
|
|
|
|
static enum arch_timer_ppi_nr arch_timer_uses_ppi __ro_after_init = ARCH_TIMER_VIRT_PPI;
|
|
static bool arch_timer_c3stop __ro_after_init;
|
|
static bool arch_timer_mem_use_virtual __ro_after_init;
|
|
static bool arch_counter_suspend_stop __ro_after_init;
|
|
#ifdef CONFIG_GENERIC_GETTIMEOFDAY
|
|
static enum vdso_clock_mode vdso_default = VDSO_CLOCKMODE_ARCHTIMER;
|
|
#else
|
|
static enum vdso_clock_mode vdso_default = VDSO_CLOCKMODE_NONE;
|
|
#endif /* CONFIG_GENERIC_GETTIMEOFDAY */
|
|
|
|
static cpumask_t evtstrm_available = CPU_MASK_NONE;
|
|
static bool evtstrm_enable __ro_after_init = IS_ENABLED(CONFIG_ARM_ARCH_TIMER_EVTSTREAM);
|
|
|
|
static int __init early_evtstrm_cfg(char *buf)
|
|
{
|
|
return strtobool(buf, &evtstrm_enable);
|
|
}
|
|
early_param("clocksource.arm_arch_timer.evtstrm", early_evtstrm_cfg);
|
|
|
|
/*
|
|
* Makes an educated guess at a valid counter width based on the Generic Timer
|
|
* specification. Of note:
|
|
* 1) the system counter is at least 56 bits wide
|
|
* 2) a roll-over time of not less than 40 years
|
|
*
|
|
* See 'ARM DDI 0487G.a D11.1.2 ("The system counter")' for more details.
|
|
*/
|
|
static int arch_counter_get_width(void)
|
|
{
|
|
u64 min_cycles = MIN_ROLLOVER_SECS * arch_timer_rate;
|
|
|
|
/* guarantee the returned width is within the valid range */
|
|
return clamp_val(ilog2(min_cycles - 1) + 1, 56, 64);
|
|
}
|
|
|
|
/*
|
|
* Architected system timer support.
|
|
*/
|
|
|
|
static __always_inline
|
|
void arch_timer_reg_write(int access, enum arch_timer_reg reg, u64 val,
|
|
struct clock_event_device *clk)
|
|
{
|
|
if (access == ARCH_TIMER_MEM_PHYS_ACCESS) {
|
|
struct arch_timer *timer = to_arch_timer(clk);
|
|
switch (reg) {
|
|
case ARCH_TIMER_REG_CTRL:
|
|
writel_relaxed((u32)val, timer->base + CNTP_CTL);
|
|
break;
|
|
case ARCH_TIMER_REG_CVAL:
|
|
/*
|
|
* Not guaranteed to be atomic, so the timer
|
|
* must be disabled at this point.
|
|
*/
|
|
writeq_relaxed(val, timer->base + CNTP_CVAL_LO);
|
|
break;
|
|
default:
|
|
BUILD_BUG();
|
|
}
|
|
} else if (access == ARCH_TIMER_MEM_VIRT_ACCESS) {
|
|
struct arch_timer *timer = to_arch_timer(clk);
|
|
switch (reg) {
|
|
case ARCH_TIMER_REG_CTRL:
|
|
writel_relaxed((u32)val, timer->base + CNTV_CTL);
|
|
break;
|
|
case ARCH_TIMER_REG_CVAL:
|
|
/* Same restriction as above */
|
|
writeq_relaxed(val, timer->base + CNTV_CVAL_LO);
|
|
break;
|
|
default:
|
|
BUILD_BUG();
|
|
}
|
|
} else {
|
|
arch_timer_reg_write_cp15(access, reg, val);
|
|
}
|
|
}
|
|
|
|
static __always_inline
|
|
u32 arch_timer_reg_read(int access, enum arch_timer_reg reg,
|
|
struct clock_event_device *clk)
|
|
{
|
|
u32 val;
|
|
|
|
if (access == ARCH_TIMER_MEM_PHYS_ACCESS) {
|
|
struct arch_timer *timer = to_arch_timer(clk);
|
|
switch (reg) {
|
|
case ARCH_TIMER_REG_CTRL:
|
|
val = readl_relaxed(timer->base + CNTP_CTL);
|
|
break;
|
|
default:
|
|
BUILD_BUG();
|
|
}
|
|
} else if (access == ARCH_TIMER_MEM_VIRT_ACCESS) {
|
|
struct arch_timer *timer = to_arch_timer(clk);
|
|
switch (reg) {
|
|
case ARCH_TIMER_REG_CTRL:
|
|
val = readl_relaxed(timer->base + CNTV_CTL);
|
|
break;
|
|
default:
|
|
BUILD_BUG();
|
|
}
|
|
} else {
|
|
val = arch_timer_reg_read_cp15(access, reg);
|
|
}
|
|
|
|
return val;
|
|
}
|
|
|
|
static notrace u64 arch_counter_get_cntpct_stable(void)
|
|
{
|
|
return __arch_counter_get_cntpct_stable();
|
|
}
|
|
|
|
static notrace u64 arch_counter_get_cntpct(void)
|
|
{
|
|
return __arch_counter_get_cntpct();
|
|
}
|
|
|
|
static notrace u64 arch_counter_get_cntvct_stable(void)
|
|
{
|
|
return __arch_counter_get_cntvct_stable();
|
|
}
|
|
|
|
static notrace u64 arch_counter_get_cntvct(void)
|
|
{
|
|
return __arch_counter_get_cntvct();
|
|
}
|
|
|
|
/*
|
|
* Default to cp15 based access because arm64 uses this function for
|
|
* sched_clock() before DT is probed and the cp15 method is guaranteed
|
|
* to exist on arm64. arm doesn't use this before DT is probed so even
|
|
* if we don't have the cp15 accessors we won't have a problem.
|
|
*/
|
|
u64 (*arch_timer_read_counter)(void) __ro_after_init = arch_counter_get_cntvct;
|
|
EXPORT_SYMBOL_GPL(arch_timer_read_counter);
|
|
|
|
static u64 arch_counter_read(struct clocksource *cs)
|
|
{
|
|
return arch_timer_read_counter();
|
|
}
|
|
|
|
static u64 arch_counter_read_cc(const struct cyclecounter *cc)
|
|
{
|
|
return arch_timer_read_counter();
|
|
}
|
|
|
|
static struct clocksource clocksource_counter = {
|
|
.name = "arch_sys_counter",
|
|
.id = CSID_ARM_ARCH_COUNTER,
|
|
.rating = 400,
|
|
.read = arch_counter_read,
|
|
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
|
|
};
|
|
|
|
static struct cyclecounter cyclecounter __ro_after_init = {
|
|
.read = arch_counter_read_cc,
|
|
};
|
|
|
|
struct ate_acpi_oem_info {
|
|
char oem_id[ACPI_OEM_ID_SIZE + 1];
|
|
char oem_table_id[ACPI_OEM_TABLE_ID_SIZE + 1];
|
|
u32 oem_revision;
|
|
};
|
|
|
|
#ifdef CONFIG_FSL_ERRATUM_A008585
|
|
/*
|
|
* The number of retries is an arbitrary value well beyond the highest number
|
|
* of iterations the loop has been observed to take.
|
|
*/
|
|
#define __fsl_a008585_read_reg(reg) ({ \
|
|
u64 _old, _new; \
|
|
int _retries = 200; \
|
|
\
|
|
do { \
|
|
_old = read_sysreg(reg); \
|
|
_new = read_sysreg(reg); \
|
|
_retries--; \
|
|
} while (unlikely(_old != _new) && _retries); \
|
|
\
|
|
WARN_ON_ONCE(!_retries); \
|
|
_new; \
|
|
})
|
|
|
|
static u64 notrace fsl_a008585_read_cntpct_el0(void)
|
|
{
|
|
return __fsl_a008585_read_reg(cntpct_el0);
|
|
}
|
|
|
|
static u64 notrace fsl_a008585_read_cntvct_el0(void)
|
|
{
|
|
return __fsl_a008585_read_reg(cntvct_el0);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_HISILICON_ERRATUM_161010101
|
|
/*
|
|
* Verify whether the value of the second read is larger than the first by
|
|
* less than 32 is the only way to confirm the value is correct, so clear the
|
|
* lower 5 bits to check whether the difference is greater than 32 or not.
|
|
* Theoretically the erratum should not occur more than twice in succession
|
|
* when reading the system counter, but it is possible that some interrupts
|
|
* may lead to more than twice read errors, triggering the warning, so setting
|
|
* the number of retries far beyond the number of iterations the loop has been
|
|
* observed to take.
|
|
*/
|
|
#define __hisi_161010101_read_reg(reg) ({ \
|
|
u64 _old, _new; \
|
|
int _retries = 50; \
|
|
\
|
|
do { \
|
|
_old = read_sysreg(reg); \
|
|
_new = read_sysreg(reg); \
|
|
_retries--; \
|
|
} while (unlikely((_new - _old) >> 5) && _retries); \
|
|
\
|
|
WARN_ON_ONCE(!_retries); \
|
|
_new; \
|
|
})
|
|
|
|
static u64 notrace hisi_161010101_read_cntpct_el0(void)
|
|
{
|
|
return __hisi_161010101_read_reg(cntpct_el0);
|
|
}
|
|
|
|
static u64 notrace hisi_161010101_read_cntvct_el0(void)
|
|
{
|
|
return __hisi_161010101_read_reg(cntvct_el0);
|
|
}
|
|
|
|
static struct ate_acpi_oem_info hisi_161010101_oem_info[] = {
|
|
/*
|
|
* Note that trailing spaces are required to properly match
|
|
* the OEM table information.
|
|
*/
|
|
{
|
|
.oem_id = "HISI ",
|
|
.oem_table_id = "HIP05 ",
|
|
.oem_revision = 0,
|
|
},
|
|
{
|
|
.oem_id = "HISI ",
|
|
.oem_table_id = "HIP06 ",
|
|
.oem_revision = 0,
|
|
},
|
|
{
|
|
.oem_id = "HISI ",
|
|
.oem_table_id = "HIP07 ",
|
|
.oem_revision = 0,
|
|
},
|
|
{ /* Sentinel indicating the end of the OEM array */ },
|
|
};
|
|
#endif
|
|
|
|
#ifdef CONFIG_ARM64_ERRATUM_858921
|
|
static u64 notrace arm64_858921_read_cntpct_el0(void)
|
|
{
|
|
u64 old, new;
|
|
|
|
old = read_sysreg(cntpct_el0);
|
|
new = read_sysreg(cntpct_el0);
|
|
return (((old ^ new) >> 32) & 1) ? old : new;
|
|
}
|
|
|
|
static u64 notrace arm64_858921_read_cntvct_el0(void)
|
|
{
|
|
u64 old, new;
|
|
|
|
old = read_sysreg(cntvct_el0);
|
|
new = read_sysreg(cntvct_el0);
|
|
return (((old ^ new) >> 32) & 1) ? old : new;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SUN50I_ERRATUM_UNKNOWN1
|
|
/*
|
|
* The low bits of the counter registers are indeterminate while bit 10 or
|
|
* greater is rolling over. Since the counter value can jump both backward
|
|
* (7ff -> 000 -> 800) and forward (7ff -> fff -> 800), ignore register values
|
|
* with all ones or all zeros in the low bits. Bound the loop by the maximum
|
|
* number of CPU cycles in 3 consecutive 24 MHz counter periods.
|
|
*/
|
|
#define __sun50i_a64_read_reg(reg) ({ \
|
|
u64 _val; \
|
|
int _retries = 150; \
|
|
\
|
|
do { \
|
|
_val = read_sysreg(reg); \
|
|
_retries--; \
|
|
} while (((_val + 1) & GENMASK(8, 0)) <= 1 && _retries); \
|
|
\
|
|
WARN_ON_ONCE(!_retries); \
|
|
_val; \
|
|
})
|
|
|
|
static u64 notrace sun50i_a64_read_cntpct_el0(void)
|
|
{
|
|
return __sun50i_a64_read_reg(cntpct_el0);
|
|
}
|
|
|
|
static u64 notrace sun50i_a64_read_cntvct_el0(void)
|
|
{
|
|
return __sun50i_a64_read_reg(cntvct_el0);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND
|
|
DEFINE_PER_CPU(const struct arch_timer_erratum_workaround *, timer_unstable_counter_workaround);
|
|
EXPORT_SYMBOL_GPL(timer_unstable_counter_workaround);
|
|
|
|
static atomic_t timer_unstable_counter_workaround_in_use = ATOMIC_INIT(0);
|
|
|
|
/*
|
|
* Force the inlining of this function so that the register accesses
|
|
* can be themselves correctly inlined.
|
|
*/
|
|
static __always_inline
|
|
void erratum_set_next_event_generic(const int access, unsigned long evt,
|
|
struct clock_event_device *clk)
|
|
{
|
|
unsigned long ctrl;
|
|
u64 cval;
|
|
|
|
ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL, clk);
|
|
ctrl |= ARCH_TIMER_CTRL_ENABLE;
|
|
ctrl &= ~ARCH_TIMER_CTRL_IT_MASK;
|
|
|
|
if (access == ARCH_TIMER_PHYS_ACCESS) {
|
|
cval = evt + arch_counter_get_cntpct_stable();
|
|
write_sysreg(cval, cntp_cval_el0);
|
|
} else {
|
|
cval = evt + arch_counter_get_cntvct_stable();
|
|
write_sysreg(cval, cntv_cval_el0);
|
|
}
|
|
|
|
arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl, clk);
|
|
}
|
|
|
|
static __maybe_unused int erratum_set_next_event_virt(unsigned long evt,
|
|
struct clock_event_device *clk)
|
|
{
|
|
erratum_set_next_event_generic(ARCH_TIMER_VIRT_ACCESS, evt, clk);
|
|
return 0;
|
|
}
|
|
|
|
static __maybe_unused int erratum_set_next_event_phys(unsigned long evt,
|
|
struct clock_event_device *clk)
|
|
{
|
|
erratum_set_next_event_generic(ARCH_TIMER_PHYS_ACCESS, evt, clk);
|
|
return 0;
|
|
}
|
|
|
|
static const struct arch_timer_erratum_workaround ool_workarounds[] = {
|
|
#ifdef CONFIG_FSL_ERRATUM_A008585
|
|
{
|
|
.match_type = ate_match_dt,
|
|
.id = "fsl,erratum-a008585",
|
|
.desc = "Freescale erratum a005858",
|
|
.read_cntpct_el0 = fsl_a008585_read_cntpct_el0,
|
|
.read_cntvct_el0 = fsl_a008585_read_cntvct_el0,
|
|
.set_next_event_phys = erratum_set_next_event_phys,
|
|
.set_next_event_virt = erratum_set_next_event_virt,
|
|
},
|
|
#endif
|
|
#ifdef CONFIG_HISILICON_ERRATUM_161010101
|
|
{
|
|
.match_type = ate_match_dt,
|
|
.id = "hisilicon,erratum-161010101",
|
|
.desc = "HiSilicon erratum 161010101",
|
|
.read_cntpct_el0 = hisi_161010101_read_cntpct_el0,
|
|
.read_cntvct_el0 = hisi_161010101_read_cntvct_el0,
|
|
.set_next_event_phys = erratum_set_next_event_phys,
|
|
.set_next_event_virt = erratum_set_next_event_virt,
|
|
},
|
|
{
|
|
.match_type = ate_match_acpi_oem_info,
|
|
.id = hisi_161010101_oem_info,
|
|
.desc = "HiSilicon erratum 161010101",
|
|
.read_cntpct_el0 = hisi_161010101_read_cntpct_el0,
|
|
.read_cntvct_el0 = hisi_161010101_read_cntvct_el0,
|
|
.set_next_event_phys = erratum_set_next_event_phys,
|
|
.set_next_event_virt = erratum_set_next_event_virt,
|
|
},
|
|
#endif
|
|
#ifdef CONFIG_ARM64_ERRATUM_858921
|
|
{
|
|
.match_type = ate_match_local_cap_id,
|
|
.id = (void *)ARM64_WORKAROUND_858921,
|
|
.desc = "ARM erratum 858921",
|
|
.read_cntpct_el0 = arm64_858921_read_cntpct_el0,
|
|
.read_cntvct_el0 = arm64_858921_read_cntvct_el0,
|
|
.set_next_event_phys = erratum_set_next_event_phys,
|
|
.set_next_event_virt = erratum_set_next_event_virt,
|
|
},
|
|
#endif
|
|
#ifdef CONFIG_SUN50I_ERRATUM_UNKNOWN1
|
|
{
|
|
.match_type = ate_match_dt,
|
|
.id = "allwinner,erratum-unknown1",
|
|
.desc = "Allwinner erratum UNKNOWN1",
|
|
.read_cntpct_el0 = sun50i_a64_read_cntpct_el0,
|
|
.read_cntvct_el0 = sun50i_a64_read_cntvct_el0,
|
|
.set_next_event_phys = erratum_set_next_event_phys,
|
|
.set_next_event_virt = erratum_set_next_event_virt,
|
|
},
|
|
#endif
|
|
#ifdef CONFIG_ARM64_ERRATUM_1418040
|
|
{
|
|
.match_type = ate_match_local_cap_id,
|
|
.id = (void *)ARM64_WORKAROUND_1418040,
|
|
.desc = "ARM erratum 1418040",
|
|
.disable_compat_vdso = true,
|
|
},
|
|
#endif
|
|
};
|
|
|
|
typedef bool (*ate_match_fn_t)(const struct arch_timer_erratum_workaround *,
|
|
const void *);
|
|
|
|
static
|
|
bool arch_timer_check_dt_erratum(const struct arch_timer_erratum_workaround *wa,
|
|
const void *arg)
|
|
{
|
|
const struct device_node *np = arg;
|
|
|
|
return of_property_read_bool(np, wa->id);
|
|
}
|
|
|
|
static
|
|
bool arch_timer_check_local_cap_erratum(const struct arch_timer_erratum_workaround *wa,
|
|
const void *arg)
|
|
{
|
|
return this_cpu_has_cap((uintptr_t)wa->id);
|
|
}
|
|
|
|
|
|
static
|
|
bool arch_timer_check_acpi_oem_erratum(const struct arch_timer_erratum_workaround *wa,
|
|
const void *arg)
|
|
{
|
|
static const struct ate_acpi_oem_info empty_oem_info = {};
|
|
const struct ate_acpi_oem_info *info = wa->id;
|
|
const struct acpi_table_header *table = arg;
|
|
|
|
/* Iterate over the ACPI OEM info array, looking for a match */
|
|
while (memcmp(info, &empty_oem_info, sizeof(*info))) {
|
|
if (!memcmp(info->oem_id, table->oem_id, ACPI_OEM_ID_SIZE) &&
|
|
!memcmp(info->oem_table_id, table->oem_table_id, ACPI_OEM_TABLE_ID_SIZE) &&
|
|
info->oem_revision == table->oem_revision)
|
|
return true;
|
|
|
|
info++;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static const struct arch_timer_erratum_workaround *
|
|
arch_timer_iterate_errata(enum arch_timer_erratum_match_type type,
|
|
ate_match_fn_t match_fn,
|
|
void *arg)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ool_workarounds); i++) {
|
|
if (ool_workarounds[i].match_type != type)
|
|
continue;
|
|
|
|
if (match_fn(&ool_workarounds[i], arg))
|
|
return &ool_workarounds[i];
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static
|
|
void arch_timer_enable_workaround(const struct arch_timer_erratum_workaround *wa,
|
|
bool local)
|
|
{
|
|
int i;
|
|
|
|
if (local) {
|
|
__this_cpu_write(timer_unstable_counter_workaround, wa);
|
|
} else {
|
|
for_each_possible_cpu(i)
|
|
per_cpu(timer_unstable_counter_workaround, i) = wa;
|
|
}
|
|
|
|
if (wa->read_cntvct_el0 || wa->read_cntpct_el0)
|
|
atomic_set(&timer_unstable_counter_workaround_in_use, 1);
|
|
|
|
/*
|
|
* Don't use the vdso fastpath if errata require using the
|
|
* out-of-line counter accessor. We may change our mind pretty
|
|
* late in the game (with a per-CPU erratum, for example), so
|
|
* change both the default value and the vdso itself.
|
|
*/
|
|
if (wa->read_cntvct_el0) {
|
|
clocksource_counter.vdso_clock_mode = VDSO_CLOCKMODE_NONE;
|
|
vdso_default = VDSO_CLOCKMODE_NONE;
|
|
} else if (wa->disable_compat_vdso && vdso_default != VDSO_CLOCKMODE_NONE) {
|
|
vdso_default = VDSO_CLOCKMODE_ARCHTIMER_NOCOMPAT;
|
|
clocksource_counter.vdso_clock_mode = vdso_default;
|
|
}
|
|
}
|
|
|
|
static void arch_timer_check_ool_workaround(enum arch_timer_erratum_match_type type,
|
|
void *arg)
|
|
{
|
|
const struct arch_timer_erratum_workaround *wa, *__wa;
|
|
ate_match_fn_t match_fn = NULL;
|
|
bool local = false;
|
|
|
|
switch (type) {
|
|
case ate_match_dt:
|
|
match_fn = arch_timer_check_dt_erratum;
|
|
break;
|
|
case ate_match_local_cap_id:
|
|
match_fn = arch_timer_check_local_cap_erratum;
|
|
local = true;
|
|
break;
|
|
case ate_match_acpi_oem_info:
|
|
match_fn = arch_timer_check_acpi_oem_erratum;
|
|
break;
|
|
default:
|
|
WARN_ON(1);
|
|
return;
|
|
}
|
|
|
|
wa = arch_timer_iterate_errata(type, match_fn, arg);
|
|
if (!wa)
|
|
return;
|
|
|
|
__wa = __this_cpu_read(timer_unstable_counter_workaround);
|
|
if (__wa && wa != __wa)
|
|
pr_warn("Can't enable workaround for %s (clashes with %s\n)",
|
|
wa->desc, __wa->desc);
|
|
|
|
if (__wa)
|
|
return;
|
|
|
|
arch_timer_enable_workaround(wa, local);
|
|
pr_info("Enabling %s workaround for %s\n",
|
|
local ? "local" : "global", wa->desc);
|
|
}
|
|
|
|
static bool arch_timer_this_cpu_has_cntvct_wa(void)
|
|
{
|
|
return has_erratum_handler(read_cntvct_el0);
|
|
}
|
|
|
|
static bool arch_timer_counter_has_wa(void)
|
|
{
|
|
return atomic_read(&timer_unstable_counter_workaround_in_use);
|
|
}
|
|
#else
|
|
#define arch_timer_check_ool_workaround(t,a) do { } while(0)
|
|
#define arch_timer_this_cpu_has_cntvct_wa() ({false;})
|
|
#define arch_timer_counter_has_wa() ({false;})
|
|
#endif /* CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND */
|
|
|
|
static __always_inline irqreturn_t timer_handler(const int access,
|
|
struct clock_event_device *evt)
|
|
{
|
|
unsigned long ctrl;
|
|
|
|
ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL, evt);
|
|
if (ctrl & ARCH_TIMER_CTRL_IT_STAT) {
|
|
ctrl |= ARCH_TIMER_CTRL_IT_MASK;
|
|
arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl, evt);
|
|
evt->event_handler(evt);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
static irqreturn_t arch_timer_handler_virt(int irq, void *dev_id)
|
|
{
|
|
struct clock_event_device *evt = dev_id;
|
|
|
|
return timer_handler(ARCH_TIMER_VIRT_ACCESS, evt);
|
|
}
|
|
|
|
static irqreturn_t arch_timer_handler_phys(int irq, void *dev_id)
|
|
{
|
|
struct clock_event_device *evt = dev_id;
|
|
|
|
return timer_handler(ARCH_TIMER_PHYS_ACCESS, evt);
|
|
}
|
|
|
|
static irqreturn_t arch_timer_handler_phys_mem(int irq, void *dev_id)
|
|
{
|
|
struct clock_event_device *evt = dev_id;
|
|
|
|
return timer_handler(ARCH_TIMER_MEM_PHYS_ACCESS, evt);
|
|
}
|
|
|
|
static irqreturn_t arch_timer_handler_virt_mem(int irq, void *dev_id)
|
|
{
|
|
struct clock_event_device *evt = dev_id;
|
|
|
|
return timer_handler(ARCH_TIMER_MEM_VIRT_ACCESS, evt);
|
|
}
|
|
|
|
static __always_inline int arch_timer_shutdown(const int access,
|
|
struct clock_event_device *clk)
|
|
{
|
|
unsigned long ctrl;
|
|
|
|
ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL, clk);
|
|
ctrl &= ~ARCH_TIMER_CTRL_ENABLE;
|
|
arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl, clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int arch_timer_shutdown_virt(struct clock_event_device *clk)
|
|
{
|
|
return arch_timer_shutdown(ARCH_TIMER_VIRT_ACCESS, clk);
|
|
}
|
|
|
|
static int arch_timer_shutdown_phys(struct clock_event_device *clk)
|
|
{
|
|
return arch_timer_shutdown(ARCH_TIMER_PHYS_ACCESS, clk);
|
|
}
|
|
|
|
static int arch_timer_shutdown_virt_mem(struct clock_event_device *clk)
|
|
{
|
|
return arch_timer_shutdown(ARCH_TIMER_MEM_VIRT_ACCESS, clk);
|
|
}
|
|
|
|
static int arch_timer_shutdown_phys_mem(struct clock_event_device *clk)
|
|
{
|
|
return arch_timer_shutdown(ARCH_TIMER_MEM_PHYS_ACCESS, clk);
|
|
}
|
|
|
|
static __always_inline void set_next_event(const int access, unsigned long evt,
|
|
struct clock_event_device *clk)
|
|
{
|
|
unsigned long ctrl;
|
|
u64 cnt;
|
|
|
|
ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL, clk);
|
|
ctrl |= ARCH_TIMER_CTRL_ENABLE;
|
|
ctrl &= ~ARCH_TIMER_CTRL_IT_MASK;
|
|
|
|
if (access == ARCH_TIMER_PHYS_ACCESS)
|
|
cnt = __arch_counter_get_cntpct();
|
|
else
|
|
cnt = __arch_counter_get_cntvct();
|
|
|
|
arch_timer_reg_write(access, ARCH_TIMER_REG_CVAL, evt + cnt, clk);
|
|
arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl, clk);
|
|
}
|
|
|
|
static int arch_timer_set_next_event_virt(unsigned long evt,
|
|
struct clock_event_device *clk)
|
|
{
|
|
set_next_event(ARCH_TIMER_VIRT_ACCESS, evt, clk);
|
|
return 0;
|
|
}
|
|
|
|
static int arch_timer_set_next_event_phys(unsigned long evt,
|
|
struct clock_event_device *clk)
|
|
{
|
|
set_next_event(ARCH_TIMER_PHYS_ACCESS, evt, clk);
|
|
return 0;
|
|
}
|
|
|
|
static u64 arch_counter_get_cnt_mem(struct arch_timer *t, int offset_lo)
|
|
{
|
|
u32 cnt_lo, cnt_hi, tmp_hi;
|
|
|
|
do {
|
|
cnt_hi = readl_relaxed(t->base + offset_lo + 4);
|
|
cnt_lo = readl_relaxed(t->base + offset_lo);
|
|
tmp_hi = readl_relaxed(t->base + offset_lo + 4);
|
|
} while (cnt_hi != tmp_hi);
|
|
|
|
return ((u64) cnt_hi << 32) | cnt_lo;
|
|
}
|
|
|
|
static __always_inline void set_next_event_mem(const int access, unsigned long evt,
|
|
struct clock_event_device *clk)
|
|
{
|
|
struct arch_timer *timer = to_arch_timer(clk);
|
|
unsigned long ctrl;
|
|
u64 cnt;
|
|
|
|
ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL, clk);
|
|
ctrl |= ARCH_TIMER_CTRL_ENABLE;
|
|
ctrl &= ~ARCH_TIMER_CTRL_IT_MASK;
|
|
|
|
if (access == ARCH_TIMER_MEM_VIRT_ACCESS)
|
|
cnt = arch_counter_get_cnt_mem(timer, CNTVCT_LO);
|
|
else
|
|
cnt = arch_counter_get_cnt_mem(timer, CNTPCT_LO);
|
|
|
|
arch_timer_reg_write(access, ARCH_TIMER_REG_CVAL, evt + cnt, clk);
|
|
arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl, clk);
|
|
}
|
|
|
|
static int arch_timer_set_next_event_virt_mem(unsigned long evt,
|
|
struct clock_event_device *clk)
|
|
{
|
|
set_next_event_mem(ARCH_TIMER_MEM_VIRT_ACCESS, evt, clk);
|
|
return 0;
|
|
}
|
|
|
|
static int arch_timer_set_next_event_phys_mem(unsigned long evt,
|
|
struct clock_event_device *clk)
|
|
{
|
|
set_next_event_mem(ARCH_TIMER_MEM_PHYS_ACCESS, evt, clk);
|
|
return 0;
|
|
}
|
|
|
|
static u64 __arch_timer_check_delta(void)
|
|
{
|
|
#ifdef CONFIG_ARM64
|
|
const struct midr_range broken_cval_midrs[] = {
|
|
/*
|
|
* XGene-1 implements CVAL in terms of TVAL, meaning
|
|
* that the maximum timer range is 32bit. Shame on them.
|
|
*
|
|
* Note that TVAL is signed, thus has only 31 of its
|
|
* 32 bits to express magnitude.
|
|
*/
|
|
MIDR_ALL_VERSIONS(MIDR_CPU_MODEL(ARM_CPU_IMP_APM,
|
|
APM_CPU_PART_POTENZA)),
|
|
{},
|
|
};
|
|
|
|
if (is_midr_in_range_list(read_cpuid_id(), broken_cval_midrs)) {
|
|
pr_warn_once("Broken CNTx_CVAL_EL1, using 32 bit TVAL instead.\n");
|
|
return CLOCKSOURCE_MASK(31);
|
|
}
|
|
#endif
|
|
return CLOCKSOURCE_MASK(arch_counter_get_width());
|
|
}
|
|
|
|
static void __arch_timer_setup(unsigned type,
|
|
struct clock_event_device *clk)
|
|
{
|
|
u64 max_delta;
|
|
|
|
clk->features = CLOCK_EVT_FEAT_ONESHOT;
|
|
|
|
if (type == ARCH_TIMER_TYPE_CP15) {
|
|
typeof(clk->set_next_event) sne;
|
|
|
|
arch_timer_check_ool_workaround(ate_match_local_cap_id, NULL);
|
|
|
|
if (arch_timer_c3stop)
|
|
clk->features |= CLOCK_EVT_FEAT_C3STOP;
|
|
clk->name = "arch_sys_timer";
|
|
clk->rating = 450;
|
|
clk->cpumask = cpumask_of(smp_processor_id());
|
|
clk->irq = arch_timer_ppi[arch_timer_uses_ppi];
|
|
switch (arch_timer_uses_ppi) {
|
|
case ARCH_TIMER_VIRT_PPI:
|
|
clk->set_state_shutdown = arch_timer_shutdown_virt;
|
|
clk->set_state_oneshot_stopped = arch_timer_shutdown_virt;
|
|
sne = erratum_handler(set_next_event_virt);
|
|
break;
|
|
case ARCH_TIMER_PHYS_SECURE_PPI:
|
|
case ARCH_TIMER_PHYS_NONSECURE_PPI:
|
|
case ARCH_TIMER_HYP_PPI:
|
|
clk->set_state_shutdown = arch_timer_shutdown_phys;
|
|
clk->set_state_oneshot_stopped = arch_timer_shutdown_phys;
|
|
sne = erratum_handler(set_next_event_phys);
|
|
break;
|
|
default:
|
|
BUG();
|
|
}
|
|
|
|
clk->set_next_event = sne;
|
|
max_delta = __arch_timer_check_delta();
|
|
} else {
|
|
clk->features |= CLOCK_EVT_FEAT_DYNIRQ;
|
|
clk->name = "arch_mem_timer";
|
|
clk->rating = 400;
|
|
clk->cpumask = cpu_possible_mask;
|
|
if (arch_timer_mem_use_virtual) {
|
|
clk->set_state_shutdown = arch_timer_shutdown_virt_mem;
|
|
clk->set_state_oneshot_stopped = arch_timer_shutdown_virt_mem;
|
|
clk->set_next_event =
|
|
arch_timer_set_next_event_virt_mem;
|
|
} else {
|
|
clk->set_state_shutdown = arch_timer_shutdown_phys_mem;
|
|
clk->set_state_oneshot_stopped = arch_timer_shutdown_phys_mem;
|
|
clk->set_next_event =
|
|
arch_timer_set_next_event_phys_mem;
|
|
}
|
|
|
|
max_delta = CLOCKSOURCE_MASK(56);
|
|
}
|
|
|
|
clk->set_state_shutdown(clk);
|
|
|
|
clockevents_config_and_register(clk, arch_timer_rate, 0xf, max_delta);
|
|
}
|
|
|
|
static void arch_timer_evtstrm_enable(unsigned int divider)
|
|
{
|
|
u32 cntkctl = arch_timer_get_cntkctl();
|
|
|
|
#ifdef CONFIG_ARM64
|
|
/* ECV is likely to require a large divider. Use the EVNTIS flag. */
|
|
if (cpus_have_const_cap(ARM64_HAS_ECV) && divider > 15) {
|
|
cntkctl |= ARCH_TIMER_EVT_INTERVAL_SCALE;
|
|
divider -= 8;
|
|
}
|
|
#endif
|
|
|
|
divider = min(divider, 15U);
|
|
cntkctl &= ~ARCH_TIMER_EVT_TRIGGER_MASK;
|
|
/* Set the divider and enable virtual event stream */
|
|
cntkctl |= (divider << ARCH_TIMER_EVT_TRIGGER_SHIFT)
|
|
| ARCH_TIMER_VIRT_EVT_EN;
|
|
arch_timer_set_cntkctl(cntkctl);
|
|
arch_timer_set_evtstrm_feature();
|
|
cpumask_set_cpu(smp_processor_id(), &evtstrm_available);
|
|
}
|
|
|
|
static void arch_timer_configure_evtstream(void)
|
|
{
|
|
int evt_stream_div, lsb;
|
|
|
|
/*
|
|
* As the event stream can at most be generated at half the frequency
|
|
* of the counter, use half the frequency when computing the divider.
|
|
*/
|
|
evt_stream_div = arch_timer_rate / ARCH_TIMER_EVT_STREAM_FREQ / 2;
|
|
|
|
/*
|
|
* Find the closest power of two to the divisor. If the adjacent bit
|
|
* of lsb (last set bit, starts from 0) is set, then we use (lsb + 1).
|
|
*/
|
|
lsb = fls(evt_stream_div) - 1;
|
|
if (lsb > 0 && (evt_stream_div & BIT(lsb - 1)))
|
|
lsb++;
|
|
|
|
/* enable event stream */
|
|
arch_timer_evtstrm_enable(max(0, lsb));
|
|
}
|
|
|
|
static void arch_counter_set_user_access(void)
|
|
{
|
|
u32 cntkctl = arch_timer_get_cntkctl();
|
|
|
|
/* Disable user access to the timers and both counters */
|
|
/* Also disable virtual event stream */
|
|
cntkctl &= ~(ARCH_TIMER_USR_PT_ACCESS_EN
|
|
| ARCH_TIMER_USR_VT_ACCESS_EN
|
|
| ARCH_TIMER_USR_VCT_ACCESS_EN
|
|
| ARCH_TIMER_VIRT_EVT_EN
|
|
| ARCH_TIMER_USR_PCT_ACCESS_EN);
|
|
|
|
/*
|
|
* Enable user access to the virtual counter if it doesn't
|
|
* need to be workaround. The vdso may have been already
|
|
* disabled though.
|
|
*/
|
|
if (arch_timer_this_cpu_has_cntvct_wa())
|
|
pr_info("CPU%d: Trapping CNTVCT access\n", smp_processor_id());
|
|
else
|
|
cntkctl |= ARCH_TIMER_USR_VCT_ACCESS_EN;
|
|
|
|
arch_timer_set_cntkctl(cntkctl);
|
|
}
|
|
|
|
static bool arch_timer_has_nonsecure_ppi(void)
|
|
{
|
|
return (arch_timer_uses_ppi == ARCH_TIMER_PHYS_SECURE_PPI &&
|
|
arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI]);
|
|
}
|
|
|
|
static u32 check_ppi_trigger(int irq)
|
|
{
|
|
u32 flags = irq_get_trigger_type(irq);
|
|
|
|
if (flags != IRQF_TRIGGER_HIGH && flags != IRQF_TRIGGER_LOW) {
|
|
pr_warn("WARNING: Invalid trigger for IRQ%d, assuming level low\n", irq);
|
|
pr_warn("WARNING: Please fix your firmware\n");
|
|
flags = IRQF_TRIGGER_LOW;
|
|
}
|
|
|
|
return flags;
|
|
}
|
|
|
|
static int arch_timer_starting_cpu(unsigned int cpu)
|
|
{
|
|
struct clock_event_device *clk = this_cpu_ptr(arch_timer_evt);
|
|
u32 flags;
|
|
|
|
__arch_timer_setup(ARCH_TIMER_TYPE_CP15, clk);
|
|
|
|
flags = check_ppi_trigger(arch_timer_ppi[arch_timer_uses_ppi]);
|
|
enable_percpu_irq(arch_timer_ppi[arch_timer_uses_ppi], flags);
|
|
|
|
if (arch_timer_has_nonsecure_ppi()) {
|
|
flags = check_ppi_trigger(arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI]);
|
|
enable_percpu_irq(arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI],
|
|
flags);
|
|
}
|
|
|
|
arch_counter_set_user_access();
|
|
if (evtstrm_enable)
|
|
arch_timer_configure_evtstream();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int validate_timer_rate(void)
|
|
{
|
|
if (!arch_timer_rate)
|
|
return -EINVAL;
|
|
|
|
/* Arch timer frequency < 1MHz can cause trouble */
|
|
WARN_ON(arch_timer_rate < 1000000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* For historical reasons, when probing with DT we use whichever (non-zero)
|
|
* rate was probed first, and don't verify that others match. If the first node
|
|
* probed has a clock-frequency property, this overrides the HW register.
|
|
*/
|
|
static void __init arch_timer_of_configure_rate(u32 rate, struct device_node *np)
|
|
{
|
|
/* Who has more than one independent system counter? */
|
|
if (arch_timer_rate)
|
|
return;
|
|
|
|
if (of_property_read_u32(np, "clock-frequency", &arch_timer_rate))
|
|
arch_timer_rate = rate;
|
|
|
|
/* Check the timer frequency. */
|
|
if (validate_timer_rate())
|
|
pr_warn("frequency not available\n");
|
|
}
|
|
|
|
static void __init arch_timer_banner(unsigned type)
|
|
{
|
|
pr_info("%s%s%s timer(s) running at %lu.%02luMHz (%s%s%s).\n",
|
|
type & ARCH_TIMER_TYPE_CP15 ? "cp15" : "",
|
|
type == (ARCH_TIMER_TYPE_CP15 | ARCH_TIMER_TYPE_MEM) ?
|
|
" and " : "",
|
|
type & ARCH_TIMER_TYPE_MEM ? "mmio" : "",
|
|
(unsigned long)arch_timer_rate / 1000000,
|
|
(unsigned long)(arch_timer_rate / 10000) % 100,
|
|
type & ARCH_TIMER_TYPE_CP15 ?
|
|
(arch_timer_uses_ppi == ARCH_TIMER_VIRT_PPI) ? "virt" : "phys" :
|
|
"",
|
|
type == (ARCH_TIMER_TYPE_CP15 | ARCH_TIMER_TYPE_MEM) ? "/" : "",
|
|
type & ARCH_TIMER_TYPE_MEM ?
|
|
arch_timer_mem_use_virtual ? "virt" : "phys" :
|
|
"");
|
|
}
|
|
|
|
u32 arch_timer_get_rate(void)
|
|
{
|
|
return arch_timer_rate;
|
|
}
|
|
|
|
bool arch_timer_evtstrm_available(void)
|
|
{
|
|
/*
|
|
* We might get called from a preemptible context. This is fine
|
|
* because availability of the event stream should be always the same
|
|
* for a preemptible context and context where we might resume a task.
|
|
*/
|
|
return cpumask_test_cpu(raw_smp_processor_id(), &evtstrm_available);
|
|
}
|
|
|
|
static u64 arch_counter_get_cntvct_mem(void)
|
|
{
|
|
return arch_counter_get_cnt_mem(arch_timer_mem, CNTVCT_LO);
|
|
}
|
|
|
|
static struct arch_timer_kvm_info arch_timer_kvm_info;
|
|
|
|
struct arch_timer_kvm_info *arch_timer_get_kvm_info(void)
|
|
{
|
|
return &arch_timer_kvm_info;
|
|
}
|
|
|
|
static void __init arch_counter_register(unsigned type)
|
|
{
|
|
u64 start_count;
|
|
int width;
|
|
|
|
/* Register the CP15 based counter if we have one */
|
|
if (type & ARCH_TIMER_TYPE_CP15) {
|
|
u64 (*rd)(void);
|
|
|
|
if ((IS_ENABLED(CONFIG_ARM64) && !is_hyp_mode_available()) ||
|
|
arch_timer_uses_ppi == ARCH_TIMER_VIRT_PPI) {
|
|
if (arch_timer_counter_has_wa())
|
|
rd = arch_counter_get_cntvct_stable;
|
|
else
|
|
rd = arch_counter_get_cntvct;
|
|
} else {
|
|
if (arch_timer_counter_has_wa())
|
|
rd = arch_counter_get_cntpct_stable;
|
|
else
|
|
rd = arch_counter_get_cntpct;
|
|
}
|
|
|
|
arch_timer_read_counter = rd;
|
|
clocksource_counter.vdso_clock_mode = vdso_default;
|
|
} else {
|
|
arch_timer_read_counter = arch_counter_get_cntvct_mem;
|
|
}
|
|
|
|
width = arch_counter_get_width();
|
|
clocksource_counter.mask = CLOCKSOURCE_MASK(width);
|
|
cyclecounter.mask = CLOCKSOURCE_MASK(width);
|
|
|
|
if (!arch_counter_suspend_stop)
|
|
clocksource_counter.flags |= CLOCK_SOURCE_SUSPEND_NONSTOP;
|
|
start_count = arch_timer_read_counter();
|
|
clocksource_register_hz(&clocksource_counter, arch_timer_rate);
|
|
cyclecounter.mult = clocksource_counter.mult;
|
|
cyclecounter.shift = clocksource_counter.shift;
|
|
timecounter_init(&arch_timer_kvm_info.timecounter,
|
|
&cyclecounter, start_count);
|
|
|
|
sched_clock_register(arch_timer_read_counter, width, arch_timer_rate);
|
|
}
|
|
|
|
static void arch_timer_stop(struct clock_event_device *clk)
|
|
{
|
|
pr_debug("disable IRQ%d cpu #%d\n", clk->irq, smp_processor_id());
|
|
|
|
disable_percpu_irq(arch_timer_ppi[arch_timer_uses_ppi]);
|
|
if (arch_timer_has_nonsecure_ppi())
|
|
disable_percpu_irq(arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI]);
|
|
|
|
clk->set_state_shutdown(clk);
|
|
}
|
|
|
|
static int arch_timer_dying_cpu(unsigned int cpu)
|
|
{
|
|
struct clock_event_device *clk = this_cpu_ptr(arch_timer_evt);
|
|
|
|
cpumask_clear_cpu(smp_processor_id(), &evtstrm_available);
|
|
|
|
arch_timer_stop(clk);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_CPU_PM
|
|
static DEFINE_PER_CPU(unsigned long, saved_cntkctl);
|
|
static int arch_timer_cpu_pm_notify(struct notifier_block *self,
|
|
unsigned long action, void *hcpu)
|
|
{
|
|
if (action == CPU_PM_ENTER) {
|
|
__this_cpu_write(saved_cntkctl, arch_timer_get_cntkctl());
|
|
|
|
cpumask_clear_cpu(smp_processor_id(), &evtstrm_available);
|
|
} else if (action == CPU_PM_ENTER_FAILED || action == CPU_PM_EXIT) {
|
|
arch_timer_set_cntkctl(__this_cpu_read(saved_cntkctl));
|
|
|
|
if (arch_timer_have_evtstrm_feature())
|
|
cpumask_set_cpu(smp_processor_id(), &evtstrm_available);
|
|
}
|
|
return NOTIFY_OK;
|
|
}
|
|
|
|
static struct notifier_block arch_timer_cpu_pm_notifier = {
|
|
.notifier_call = arch_timer_cpu_pm_notify,
|
|
};
|
|
|
|
static int __init arch_timer_cpu_pm_init(void)
|
|
{
|
|
return cpu_pm_register_notifier(&arch_timer_cpu_pm_notifier);
|
|
}
|
|
|
|
static void __init arch_timer_cpu_pm_deinit(void)
|
|
{
|
|
WARN_ON(cpu_pm_unregister_notifier(&arch_timer_cpu_pm_notifier));
|
|
}
|
|
|
|
#else
|
|
static int __init arch_timer_cpu_pm_init(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void __init arch_timer_cpu_pm_deinit(void)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
static int __init arch_timer_register(void)
|
|
{
|
|
int err;
|
|
int ppi;
|
|
|
|
arch_timer_evt = alloc_percpu(struct clock_event_device);
|
|
if (!arch_timer_evt) {
|
|
err = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
ppi = arch_timer_ppi[arch_timer_uses_ppi];
|
|
switch (arch_timer_uses_ppi) {
|
|
case ARCH_TIMER_VIRT_PPI:
|
|
err = request_percpu_irq(ppi, arch_timer_handler_virt,
|
|
"arch_timer", arch_timer_evt);
|
|
break;
|
|
case ARCH_TIMER_PHYS_SECURE_PPI:
|
|
case ARCH_TIMER_PHYS_NONSECURE_PPI:
|
|
err = request_percpu_irq(ppi, arch_timer_handler_phys,
|
|
"arch_timer", arch_timer_evt);
|
|
if (!err && arch_timer_has_nonsecure_ppi()) {
|
|
ppi = arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI];
|
|
err = request_percpu_irq(ppi, arch_timer_handler_phys,
|
|
"arch_timer", arch_timer_evt);
|
|
if (err)
|
|
free_percpu_irq(arch_timer_ppi[ARCH_TIMER_PHYS_SECURE_PPI],
|
|
arch_timer_evt);
|
|
}
|
|
break;
|
|
case ARCH_TIMER_HYP_PPI:
|
|
err = request_percpu_irq(ppi, arch_timer_handler_phys,
|
|
"arch_timer", arch_timer_evt);
|
|
break;
|
|
default:
|
|
BUG();
|
|
}
|
|
|
|
if (err) {
|
|
pr_err("can't register interrupt %d (%d)\n", ppi, err);
|
|
goto out_free;
|
|
}
|
|
|
|
err = arch_timer_cpu_pm_init();
|
|
if (err)
|
|
goto out_unreg_notify;
|
|
|
|
/* Register and immediately configure the timer on the boot CPU */
|
|
err = cpuhp_setup_state(CPUHP_AP_ARM_ARCH_TIMER_STARTING,
|
|
"clockevents/arm/arch_timer:starting",
|
|
arch_timer_starting_cpu, arch_timer_dying_cpu);
|
|
if (err)
|
|
goto out_unreg_cpupm;
|
|
return 0;
|
|
|
|
out_unreg_cpupm:
|
|
arch_timer_cpu_pm_deinit();
|
|
|
|
out_unreg_notify:
|
|
free_percpu_irq(arch_timer_ppi[arch_timer_uses_ppi], arch_timer_evt);
|
|
if (arch_timer_has_nonsecure_ppi())
|
|
free_percpu_irq(arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI],
|
|
arch_timer_evt);
|
|
|
|
out_free:
|
|
free_percpu(arch_timer_evt);
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static int __init arch_timer_mem_register(void __iomem *base, unsigned int irq)
|
|
{
|
|
int ret;
|
|
irq_handler_t func;
|
|
|
|
arch_timer_mem = kzalloc(sizeof(*arch_timer_mem), GFP_KERNEL);
|
|
if (!arch_timer_mem)
|
|
return -ENOMEM;
|
|
|
|
arch_timer_mem->base = base;
|
|
arch_timer_mem->evt.irq = irq;
|
|
__arch_timer_setup(ARCH_TIMER_TYPE_MEM, &arch_timer_mem->evt);
|
|
|
|
if (arch_timer_mem_use_virtual)
|
|
func = arch_timer_handler_virt_mem;
|
|
else
|
|
func = arch_timer_handler_phys_mem;
|
|
|
|
ret = request_irq(irq, func, IRQF_TIMER, "arch_mem_timer", &arch_timer_mem->evt);
|
|
if (ret) {
|
|
pr_err("Failed to request mem timer irq\n");
|
|
kfree(arch_timer_mem);
|
|
arch_timer_mem = NULL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct of_device_id arch_timer_of_match[] __initconst = {
|
|
{ .compatible = "arm,armv7-timer", },
|
|
{ .compatible = "arm,armv8-timer", },
|
|
{},
|
|
};
|
|
|
|
static const struct of_device_id arch_timer_mem_of_match[] __initconst = {
|
|
{ .compatible = "arm,armv7-timer-mem", },
|
|
{},
|
|
};
|
|
|
|
static bool __init arch_timer_needs_of_probing(void)
|
|
{
|
|
struct device_node *dn;
|
|
bool needs_probing = false;
|
|
unsigned int mask = ARCH_TIMER_TYPE_CP15 | ARCH_TIMER_TYPE_MEM;
|
|
|
|
/* We have two timers, and both device-tree nodes are probed. */
|
|
if ((arch_timers_present & mask) == mask)
|
|
return false;
|
|
|
|
/*
|
|
* Only one type of timer is probed,
|
|
* check if we have another type of timer node in device-tree.
|
|
*/
|
|
if (arch_timers_present & ARCH_TIMER_TYPE_CP15)
|
|
dn = of_find_matching_node(NULL, arch_timer_mem_of_match);
|
|
else
|
|
dn = of_find_matching_node(NULL, arch_timer_of_match);
|
|
|
|
if (dn && of_device_is_available(dn))
|
|
needs_probing = true;
|
|
|
|
of_node_put(dn);
|
|
|
|
return needs_probing;
|
|
}
|
|
|
|
static int __init arch_timer_common_init(void)
|
|
{
|
|
arch_timer_banner(arch_timers_present);
|
|
arch_counter_register(arch_timers_present);
|
|
return arch_timer_arch_init();
|
|
}
|
|
|
|
/**
|
|
* arch_timer_select_ppi() - Select suitable PPI for the current system.
|
|
*
|
|
* If HYP mode is available, we know that the physical timer
|
|
* has been configured to be accessible from PL1. Use it, so
|
|
* that a guest can use the virtual timer instead.
|
|
*
|
|
* On ARMv8.1 with VH extensions, the kernel runs in HYP. VHE
|
|
* accesses to CNTP_*_EL1 registers are silently redirected to
|
|
* their CNTHP_*_EL2 counterparts, and use a different PPI
|
|
* number.
|
|
*
|
|
* If no interrupt provided for virtual timer, we'll have to
|
|
* stick to the physical timer. It'd better be accessible...
|
|
* For arm64 we never use the secure interrupt.
|
|
*
|
|
* Return: a suitable PPI type for the current system.
|
|
*/
|
|
static enum arch_timer_ppi_nr __init arch_timer_select_ppi(void)
|
|
{
|
|
if (is_kernel_in_hyp_mode())
|
|
return ARCH_TIMER_HYP_PPI;
|
|
|
|
if (!is_hyp_mode_available() && arch_timer_ppi[ARCH_TIMER_VIRT_PPI])
|
|
return ARCH_TIMER_VIRT_PPI;
|
|
|
|
if (IS_ENABLED(CONFIG_ARM64))
|
|
return ARCH_TIMER_PHYS_NONSECURE_PPI;
|
|
|
|
return ARCH_TIMER_PHYS_SECURE_PPI;
|
|
}
|
|
|
|
static void __init arch_timer_populate_kvm_info(void)
|
|
{
|
|
arch_timer_kvm_info.virtual_irq = arch_timer_ppi[ARCH_TIMER_VIRT_PPI];
|
|
if (is_kernel_in_hyp_mode())
|
|
arch_timer_kvm_info.physical_irq = arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI];
|
|
}
|
|
|
|
static int __init arch_timer_of_init(struct device_node *np)
|
|
{
|
|
int i, irq, ret;
|
|
u32 rate;
|
|
bool has_names;
|
|
|
|
if (arch_timers_present & ARCH_TIMER_TYPE_CP15) {
|
|
pr_warn("multiple nodes in dt, skipping\n");
|
|
return 0;
|
|
}
|
|
|
|
arch_timers_present |= ARCH_TIMER_TYPE_CP15;
|
|
|
|
has_names = of_property_read_bool(np, "interrupt-names");
|
|
|
|
for (i = ARCH_TIMER_PHYS_SECURE_PPI; i < ARCH_TIMER_MAX_TIMER_PPI; i++) {
|
|
if (has_names)
|
|
irq = of_irq_get_byname(np, arch_timer_ppi_names[i]);
|
|
else
|
|
irq = of_irq_get(np, i);
|
|
if (irq > 0)
|
|
arch_timer_ppi[i] = irq;
|
|
}
|
|
|
|
arch_timer_populate_kvm_info();
|
|
|
|
rate = arch_timer_get_cntfrq();
|
|
arch_timer_of_configure_rate(rate, np);
|
|
|
|
arch_timer_c3stop = !of_property_read_bool(np, "always-on");
|
|
|
|
/* Check for globally applicable workarounds */
|
|
arch_timer_check_ool_workaround(ate_match_dt, np);
|
|
|
|
/*
|
|
* If we cannot rely on firmware initializing the timer registers then
|
|
* we should use the physical timers instead.
|
|
*/
|
|
if (IS_ENABLED(CONFIG_ARM) &&
|
|
of_property_read_bool(np, "arm,cpu-registers-not-fw-configured"))
|
|
arch_timer_uses_ppi = ARCH_TIMER_PHYS_SECURE_PPI;
|
|
else
|
|
arch_timer_uses_ppi = arch_timer_select_ppi();
|
|
|
|
if (!arch_timer_ppi[arch_timer_uses_ppi]) {
|
|
pr_err("No interrupt available, giving up\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* On some systems, the counter stops ticking when in suspend. */
|
|
arch_counter_suspend_stop = of_property_read_bool(np,
|
|
"arm,no-tick-in-suspend");
|
|
|
|
ret = arch_timer_register();
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (arch_timer_needs_of_probing())
|
|
return 0;
|
|
|
|
return arch_timer_common_init();
|
|
}
|
|
TIMER_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", arch_timer_of_init);
|
|
TIMER_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer", arch_timer_of_init);
|
|
|
|
static u32 __init
|
|
arch_timer_mem_frame_get_cntfrq(struct arch_timer_mem_frame *frame)
|
|
{
|
|
void __iomem *base;
|
|
u32 rate;
|
|
|
|
base = ioremap(frame->cntbase, frame->size);
|
|
if (!base) {
|
|
pr_err("Unable to map frame @ %pa\n", &frame->cntbase);
|
|
return 0;
|
|
}
|
|
|
|
rate = readl_relaxed(base + CNTFRQ);
|
|
|
|
iounmap(base);
|
|
|
|
return rate;
|
|
}
|
|
|
|
static struct arch_timer_mem_frame * __init
|
|
arch_timer_mem_find_best_frame(struct arch_timer_mem *timer_mem)
|
|
{
|
|
struct arch_timer_mem_frame *frame, *best_frame = NULL;
|
|
void __iomem *cntctlbase;
|
|
u32 cnttidr;
|
|
int i;
|
|
|
|
cntctlbase = ioremap(timer_mem->cntctlbase, timer_mem->size);
|
|
if (!cntctlbase) {
|
|
pr_err("Can't map CNTCTLBase @ %pa\n",
|
|
&timer_mem->cntctlbase);
|
|
return NULL;
|
|
}
|
|
|
|
cnttidr = readl_relaxed(cntctlbase + CNTTIDR);
|
|
|
|
/*
|
|
* Try to find a virtual capable frame. Otherwise fall back to a
|
|
* physical capable frame.
|
|
*/
|
|
for (i = 0; i < ARCH_TIMER_MEM_MAX_FRAMES; i++) {
|
|
u32 cntacr = CNTACR_RFRQ | CNTACR_RWPT | CNTACR_RPCT |
|
|
CNTACR_RWVT | CNTACR_RVOFF | CNTACR_RVCT;
|
|
|
|
frame = &timer_mem->frame[i];
|
|
if (!frame->valid)
|
|
continue;
|
|
|
|
/* Try enabling everything, and see what sticks */
|
|
writel_relaxed(cntacr, cntctlbase + CNTACR(i));
|
|
cntacr = readl_relaxed(cntctlbase + CNTACR(i));
|
|
|
|
if ((cnttidr & CNTTIDR_VIRT(i)) &&
|
|
!(~cntacr & (CNTACR_RWVT | CNTACR_RVCT))) {
|
|
best_frame = frame;
|
|
arch_timer_mem_use_virtual = true;
|
|
break;
|
|
}
|
|
|
|
if (~cntacr & (CNTACR_RWPT | CNTACR_RPCT))
|
|
continue;
|
|
|
|
best_frame = frame;
|
|
}
|
|
|
|
iounmap(cntctlbase);
|
|
|
|
return best_frame;
|
|
}
|
|
|
|
static int __init
|
|
arch_timer_mem_frame_register(struct arch_timer_mem_frame *frame)
|
|
{
|
|
void __iomem *base;
|
|
int ret, irq = 0;
|
|
|
|
if (arch_timer_mem_use_virtual)
|
|
irq = frame->virt_irq;
|
|
else
|
|
irq = frame->phys_irq;
|
|
|
|
if (!irq) {
|
|
pr_err("Frame missing %s irq.\n",
|
|
arch_timer_mem_use_virtual ? "virt" : "phys");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!request_mem_region(frame->cntbase, frame->size,
|
|
"arch_mem_timer"))
|
|
return -EBUSY;
|
|
|
|
base = ioremap(frame->cntbase, frame->size);
|
|
if (!base) {
|
|
pr_err("Can't map frame's registers\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
ret = arch_timer_mem_register(base, irq);
|
|
if (ret) {
|
|
iounmap(base);
|
|
return ret;
|
|
}
|
|
|
|
arch_timers_present |= ARCH_TIMER_TYPE_MEM;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __init arch_timer_mem_of_init(struct device_node *np)
|
|
{
|
|
struct arch_timer_mem *timer_mem;
|
|
struct arch_timer_mem_frame *frame;
|
|
struct device_node *frame_node;
|
|
struct resource res;
|
|
int ret = -EINVAL;
|
|
u32 rate;
|
|
|
|
timer_mem = kzalloc(sizeof(*timer_mem), GFP_KERNEL);
|
|
if (!timer_mem)
|
|
return -ENOMEM;
|
|
|
|
if (of_address_to_resource(np, 0, &res))
|
|
goto out;
|
|
timer_mem->cntctlbase = res.start;
|
|
timer_mem->size = resource_size(&res);
|
|
|
|
for_each_available_child_of_node(np, frame_node) {
|
|
u32 n;
|
|
struct arch_timer_mem_frame *frame;
|
|
|
|
if (of_property_read_u32(frame_node, "frame-number", &n)) {
|
|
pr_err(FW_BUG "Missing frame-number.\n");
|
|
of_node_put(frame_node);
|
|
goto out;
|
|
}
|
|
if (n >= ARCH_TIMER_MEM_MAX_FRAMES) {
|
|
pr_err(FW_BUG "Wrong frame-number, only 0-%u are permitted.\n",
|
|
ARCH_TIMER_MEM_MAX_FRAMES - 1);
|
|
of_node_put(frame_node);
|
|
goto out;
|
|
}
|
|
frame = &timer_mem->frame[n];
|
|
|
|
if (frame->valid) {
|
|
pr_err(FW_BUG "Duplicated frame-number.\n");
|
|
of_node_put(frame_node);
|
|
goto out;
|
|
}
|
|
|
|
if (of_address_to_resource(frame_node, 0, &res)) {
|
|
of_node_put(frame_node);
|
|
goto out;
|
|
}
|
|
frame->cntbase = res.start;
|
|
frame->size = resource_size(&res);
|
|
|
|
frame->virt_irq = irq_of_parse_and_map(frame_node,
|
|
ARCH_TIMER_VIRT_SPI);
|
|
frame->phys_irq = irq_of_parse_and_map(frame_node,
|
|
ARCH_TIMER_PHYS_SPI);
|
|
|
|
frame->valid = true;
|
|
}
|
|
|
|
frame = arch_timer_mem_find_best_frame(timer_mem);
|
|
if (!frame) {
|
|
pr_err("Unable to find a suitable frame in timer @ %pa\n",
|
|
&timer_mem->cntctlbase);
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
rate = arch_timer_mem_frame_get_cntfrq(frame);
|
|
arch_timer_of_configure_rate(rate, np);
|
|
|
|
ret = arch_timer_mem_frame_register(frame);
|
|
if (!ret && !arch_timer_needs_of_probing())
|
|
ret = arch_timer_common_init();
|
|
out:
|
|
kfree(timer_mem);
|
|
return ret;
|
|
}
|
|
TIMER_OF_DECLARE(armv7_arch_timer_mem, "arm,armv7-timer-mem",
|
|
arch_timer_mem_of_init);
|
|
|
|
#ifdef CONFIG_ACPI_GTDT
|
|
static int __init
|
|
arch_timer_mem_verify_cntfrq(struct arch_timer_mem *timer_mem)
|
|
{
|
|
struct arch_timer_mem_frame *frame;
|
|
u32 rate;
|
|
int i;
|
|
|
|
for (i = 0; i < ARCH_TIMER_MEM_MAX_FRAMES; i++) {
|
|
frame = &timer_mem->frame[i];
|
|
|
|
if (!frame->valid)
|
|
continue;
|
|
|
|
rate = arch_timer_mem_frame_get_cntfrq(frame);
|
|
if (rate == arch_timer_rate)
|
|
continue;
|
|
|
|
pr_err(FW_BUG "CNTFRQ mismatch: frame @ %pa: (0x%08lx), CPU: (0x%08lx)\n",
|
|
&frame->cntbase,
|
|
(unsigned long)rate, (unsigned long)arch_timer_rate);
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __init arch_timer_mem_acpi_init(int platform_timer_count)
|
|
{
|
|
struct arch_timer_mem *timers, *timer;
|
|
struct arch_timer_mem_frame *frame, *best_frame = NULL;
|
|
int timer_count, i, ret = 0;
|
|
|
|
timers = kcalloc(platform_timer_count, sizeof(*timers),
|
|
GFP_KERNEL);
|
|
if (!timers)
|
|
return -ENOMEM;
|
|
|
|
ret = acpi_arch_timer_mem_init(timers, &timer_count);
|
|
if (ret || !timer_count)
|
|
goto out;
|
|
|
|
/*
|
|
* While unlikely, it's theoretically possible that none of the frames
|
|
* in a timer expose the combination of feature we want.
|
|
*/
|
|
for (i = 0; i < timer_count; i++) {
|
|
timer = &timers[i];
|
|
|
|
frame = arch_timer_mem_find_best_frame(timer);
|
|
if (!best_frame)
|
|
best_frame = frame;
|
|
|
|
ret = arch_timer_mem_verify_cntfrq(timer);
|
|
if (ret) {
|
|
pr_err("Disabling MMIO timers due to CNTFRQ mismatch\n");
|
|
goto out;
|
|
}
|
|
|
|
if (!best_frame) /* implies !frame */
|
|
/*
|
|
* Only complain about missing suitable frames if we
|
|
* haven't already found one in a previous iteration.
|
|
*/
|
|
pr_err("Unable to find a suitable frame in timer @ %pa\n",
|
|
&timer->cntctlbase);
|
|
}
|
|
|
|
if (best_frame)
|
|
ret = arch_timer_mem_frame_register(best_frame);
|
|
out:
|
|
kfree(timers);
|
|
return ret;
|
|
}
|
|
|
|
/* Initialize per-processor generic timer and memory-mapped timer(if present) */
|
|
static int __init arch_timer_acpi_init(struct acpi_table_header *table)
|
|
{
|
|
int ret, platform_timer_count;
|
|
|
|
if (arch_timers_present & ARCH_TIMER_TYPE_CP15) {
|
|
pr_warn("already initialized, skipping\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
arch_timers_present |= ARCH_TIMER_TYPE_CP15;
|
|
|
|
ret = acpi_gtdt_init(table, &platform_timer_count);
|
|
if (ret)
|
|
return ret;
|
|
|
|
arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI] =
|
|
acpi_gtdt_map_ppi(ARCH_TIMER_PHYS_NONSECURE_PPI);
|
|
|
|
arch_timer_ppi[ARCH_TIMER_VIRT_PPI] =
|
|
acpi_gtdt_map_ppi(ARCH_TIMER_VIRT_PPI);
|
|
|
|
arch_timer_ppi[ARCH_TIMER_HYP_PPI] =
|
|
acpi_gtdt_map_ppi(ARCH_TIMER_HYP_PPI);
|
|
|
|
arch_timer_populate_kvm_info();
|
|
|
|
/*
|
|
* When probing via ACPI, we have no mechanism to override the sysreg
|
|
* CNTFRQ value. This *must* be correct.
|
|
*/
|
|
arch_timer_rate = arch_timer_get_cntfrq();
|
|
ret = validate_timer_rate();
|
|
if (ret) {
|
|
pr_err(FW_BUG "frequency not available.\n");
|
|
return ret;
|
|
}
|
|
|
|
arch_timer_uses_ppi = arch_timer_select_ppi();
|
|
if (!arch_timer_ppi[arch_timer_uses_ppi]) {
|
|
pr_err("No interrupt available, giving up\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Always-on capability */
|
|
arch_timer_c3stop = acpi_gtdt_c3stop(arch_timer_uses_ppi);
|
|
|
|
/* Check for globally applicable workarounds */
|
|
arch_timer_check_ool_workaround(ate_match_acpi_oem_info, table);
|
|
|
|
ret = arch_timer_register();
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (platform_timer_count &&
|
|
arch_timer_mem_acpi_init(platform_timer_count))
|
|
pr_err("Failed to initialize memory-mapped timer.\n");
|
|
|
|
return arch_timer_common_init();
|
|
}
|
|
TIMER_ACPI_DECLARE(arch_timer, ACPI_SIG_GTDT, arch_timer_acpi_init);
|
|
#endif
|
|
|
|
int kvm_arch_ptp_get_crosststamp(u64 *cycle, struct timespec64 *ts,
|
|
struct clocksource **cs)
|
|
{
|
|
struct arm_smccc_res hvc_res;
|
|
u32 ptp_counter;
|
|
ktime_t ktime;
|
|
|
|
if (!IS_ENABLED(CONFIG_HAVE_ARM_SMCCC_DISCOVERY))
|
|
return -EOPNOTSUPP;
|
|
|
|
if (arch_timer_uses_ppi == ARCH_TIMER_VIRT_PPI)
|
|
ptp_counter = KVM_PTP_VIRT_COUNTER;
|
|
else
|
|
ptp_counter = KVM_PTP_PHYS_COUNTER;
|
|
|
|
arm_smccc_1_1_invoke(ARM_SMCCC_VENDOR_HYP_KVM_PTP_FUNC_ID,
|
|
ptp_counter, &hvc_res);
|
|
|
|
if ((int)(hvc_res.a0) < 0)
|
|
return -EOPNOTSUPP;
|
|
|
|
ktime = (u64)hvc_res.a0 << 32 | hvc_res.a1;
|
|
*ts = ktime_to_timespec64(ktime);
|
|
if (cycle)
|
|
*cycle = (u64)hvc_res.a2 << 32 | hvc_res.a3;
|
|
if (cs)
|
|
*cs = &clocksource_counter;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(kvm_arch_ptp_get_crosststamp);
|